vRA 7 - points of endpoint - reference vRA

Similar Questions

• Tandberg Multi Point called endpoints

  Hello Experts from Cisco TP,

  We have Tandberg Profile and Ex 90 end points, I understand the EX series and profile series integrated MCU resource, how do I configure Multipoint calls without using a separate MCU.

  We have ver.6 VCS and MCU 4505. Can make Conference calls using MCU 4505.

  Thank you

  Bobby

  Hi Bobby,.

  You can foind installed on endpoints, it is visible on a GUI on the system information page, section Installed options

  According to the description of the product of C90, it contatin multisite functionality, if it isn't on EX90, then perhaps he is not bought for it.

  You can check the license using the serial number of the device and licensing tool

  Link to the tool: https://tools.cisco.com/SWIFT/LicensingUI/Home#tabbeditem

  Reach:

  • Tandberg Software Upgrade & search

  then click on search and return and step

  Kind regards

  Vivek

• Can we call a point of endpoint not registered by IP without MCU

  Hello

  We have several items endpoint with CUCM 9.5. We also have a legacy Tandberg, probably aged 7 years located on one of our sites WAN (connected via leased line) that we want to call and receive calls through IP. We do not have any microcontroller or other products of voice, only CUCM.

  I've been looking for examples, but since I am brand new to this subject I'd like help experienced forum members. From what I understood, to call an end point recorded since that not saved, we have to deal the [email protected] / * /, is - that correct? What is dial the IP of the endpoint not inherited of the registered endpoint?

  Any help is appreciated.

  Concerning

  MOE Shea

  You need Expressway-C/E to call endpoint.  CUCM does not support the IP numbering, but using a channel Express-C/E, you can see the Dial IP addresses for endpoints registered to CUCM VCS / example Configuration of the highway.

• Control point for endpoint connect is compatible with Windows 8.1?

  Original title: CheckPoint endpoint connect

  Hello

  I'll do the upgrade of Windows 8 Pro for Windows Pro 8.1.

  By choosing the upgrade path that allows me to keep all the files, settings and applications, it shows that the only application that I have to uninstall will be Checkpoint Endpoint Connect (which currently runs under Windows 8 Pro).

  At all known installation CheckPoint EndPoint Connect on Windows Pro 8.1 and installed successfully?

  Thanks for the reply.

  I've went ahead with the installation of Windows RTM 8.1 and took the risk that Checkpoint would not be compatible.

  I was able to uninstall Checkpoint, as part of the upgrade of Windows 8.1 window and subsequently install Checkpoint endpoint connect successfully.

  Therefore, I am happy to say that for our Organization and our version of the control point, it is looking like it is fully compatible with Windows 8.1.

• reversing the endpoint reference and note

  Hello

  I am looking for a way to reverse the end of a sentence and a reference point in the text. Have a lot of documents '.» (1)"where (1) the style of tank (Exhibitor) applied to it. We try to get reversed with a grep, but we are left with "(1).", but both superscript.

  Can it be done? or to look for another solution?

  Hi Gert,

  In 3 steps with Multi-Find/Change. Thus, a single click:

  

  

  

• Question query - binding time span for Point-in-time references

  I'm pulling historical data in a table for the duration of the recordings, using a reference point-in-time. I succumbed.
  
  I threw some examples of tables and data to illustrate what I'm looking for:

  Create Table EmployeeInfo (
         id Number(10,0),               -- Employee ID Number
         Name VarChar2(32 Byte),        -- Employee Name
         CurrentShift VarChar2(2 Byte)  -- Current Employee Shift
         );
  
  Create Table ShiftChanges (
         id Number(10,0),               -- Employee ID that this shift change record is for
         ChangeDate Date,               -- Date that this Change Took Place
         OldShift VarChar2(2 Byte),
         NewShift VarChar2(2 Byte)
         );
  
  Create Table TimeCard(
         id Number(10,0),               -- Employee ID Number for this Timecard
         WorkDay Date,                  -- What Day is this Timecard for?
         Hours Float(63)                -- Number of Hours worked.
         ); 
  
  COMMIT;

  INSERT INTO EmployeeInfo VALUES (100,'John Doe','Days')
  INSERT INTO EmployeeInfo VALUES (101,'Jane Doe','Days');
  INSERT INTO TimeCard VALUES (100, to_date('01012010','ddmmyyyy'), 10.5);
  INSERT INTO TimeCard VALUES (101, to_date('01012010','ddmmyyyy'), 10);
  INSERT INTO TimeCard VALUES (100, to_date('02012010','ddmmyyyy'), 9);
  INSERT INTO TimeCard VALUES (101, to_date('02012010','ddmmyyyy'), 10.5);
  INSERT INTO TimeCard VALUES (100, to_date('03012010','ddmmyyyy'), 8);
  INSERT INTO TimeCard VALUES (101, to_date('03012010','ddmmyyyy'), 7);
  INSERT INTO ShiftChanges VALUES (100, to_date('02012010','ddmmyyyy'), 'Nights', 'Days');
  COMMIT;

  I could do a query such as:

  SELECT TC.id, 
         EM.Name, 
         TC.Workday, 
         EM.CurrentShift AS Shift
  FROM   TimeCard TC,
         EmployeeInfo EM
  WHERE  (TC.ID=EM.ID(+));

  But he won't give me the history , only the current turn. Since John Doe last travel on Jan 2 nights to days, the query above would not reflect it.
  
  I tried to join the historical table using a less - than operator. This does not work for more than one line may be returned.

  SELECT TC.id, 
         EM.Name, 
         TC.Workday, 
         SC.NewShift AS Shift
  FROM   TimeCard TC,
         EmployeeInfo EM,
         ShiftChanges SC
  WHERE  (TC.ID=EM.ID(+)) AND
         (TC.ID=SC.ID(+) AND TC.WORKDAY<=SC.WORKDAY(+));

  The problem is that you have to parse multiple records in a table in order to obtain accurate historical data for the other.
  
  The following SQL script {color: green} works {color} - if the values are defined in advance.

  DEFINE EMPID=101;
  DEFINE CHGDATE=to_date('01/01/2010','dd/mm/yyyy');
  SELECT SQ.Shift
  FROM   (SELECT  ShiftChanges.NewShift AS Shift,
                  RANK() OVER (ORDER BY ShiftChanges.ChangeDate DESC) R
          FROM    ShiftChanges
          WHERE   ShiftChanges.id = &EMPID AND
                  ShiftChanges.ChangeDate <= &CHGDATE
          ) SQ
  WHERE R = 1

  However, I was unsuccessful in adapting the tables in the example I provided. If I insert the query as a subquery inline* in the statement select, it won't work, because the criteria is nested two levels down, and I can't get the values of parent in the first level.
  
  I didn't think in a way I can do this by using a subquery nested - I keep running into this problem - how you link the data with a reference point-in-time.
  
  Any ideas / illuminating thoughts?
  
  Thank you
  
  -----
  {size: 8} _SELECT * FROM V$ VERSION information: _
  Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
  PL/SQL Release 9.2.0.8.0 - Production
  "CORE 9.2.0.8.0 Production."
  AMT for 32-bit Windows: Version 9.2.0.8.0 - Production
  NLSRTL Version 9.2.0.8.0 - Production
  {size}
  
  user10879184 re-written the original message on March 29, 2010 13:21 to take into account suggestions made by poster.

  On the drive home, I realized that we had to refer to the OldShift rather than NewShift to cover cases where the shift that an amendment has been made. In this case, the days before first shift change would get the current passage reported, although this was not correct. The fixed code is:

  SELECT TC.id,
         EM.Name,
         TC.Workday,
         NVL(SC.OldShift,EM.CurrentShift) AS Shift
  FROM   TimeCard TC,
         EmployeeInfo EM,
         (SELECT ID, Workday, ChangeDate, OldShift
          FROM
                 (SELECT TC2.ID, TC2.Workday, SC2.ChangeDate, SC2.Oldshift,
                         MIN (SC2.ChangeDate) KEEP (DENSE_RANK FIRST ORDER BY SC2.ChangeDate)
                                              OVER (PARTITION BY SC2.ID, TC2.Workday) AS Min_ChangeDate
                  FROM   ShiftChanges SC2,
                         TimeCard TC2
                  WHERE  TC2.Workday < SC2.ChangeDate
                  AND    TC2.ID = SC2.ID
                  )
          WHERE   ChangeDate = Min_ChangeDate
          ) SC
  WHERE  TC.ID=EM.ID(+) AND
         TC.ID=SC.ID(+) AND
         TC.Workday = SC.Workday(+)
  

  It works it is not terribly effective. Perspective online joined the entire table for the time sheet to the table of ShiftChange together. I imagine that you would be restrictive forms of presence reported by a range of dates in the main query, and you do not want to apply the same filter inside the display online. Even if you filter on employee ID's

  For example.

  SELECT TC.id,
         EM.Name,
         TC.Workday,
         NVL(SC.OldShift,EM.CurrentShift) AS Shift
  FROM   TimeCard TC,
         EmployeeInfo EM,
         (SELECT ID, Workday, ChangeDate, OldShift
          FROM
                 (SELECT TC2.ID, TC2.Workday, SC2.ChangeDate, SC2.Oldshift,
                         MIN (SC2.ChangeDate) KEEP (DENSE_RANK FIRST ORDER BY SC2.ChangeDate)
                                              OVER (PARTITION BY SC2.ID, TC2.Workday) AS Min_ChangeDate
                  FROM   ShiftChanges SC2,
                         TimeCard TC2
                  WHERE  TC2.Workday < SC2.ChangeDate
                  AND    TC2.ID = SC2.ID
                  AND    TC2.Workday >= SYSDATE - 7
                  )
          WHERE   ChangeDate = Min_ChangeDate
          ) SC
  WHERE  TC.ID=EM.ID(+) AND
         TC.ID=SC.ID(+) AND
         TC.Workday = SC.Workday(+) AND
         TC.Workday >= SYSDATE - 7
  

• Online zero reference to several points of

  I have several x, y points.  I would like to point there chose 2 and set them to zero as a reference line, then calculate the gap of all other points of this reference line.  LabVIEW has a function that can do this.  Thank you.

  Just do a linear fit for two points and subtract the result from all data points.  See example (quick and dirty and potentially buggy).

• Problems to change my url endpoint data control for Web Service design time vs deploy times. Where is the url of time to deploy the "deployment configuration" stored?

  https://blogs.Oracle.com/ADF/entry/changing_endpoint_url_for_a_web_service_data_control

  Using this link as a reference, I created a data control Web Service, and when I deploy via JDeveloper for different environments I can change my point of endpoint accordingly on this screen:

  

  However when I change my point of termination at the design time, the changes do not appear in the screen "Configuration of the deployment. This would not normally be a problem, but our automated deployment (maven/ant) seems to keep picking up the url "Deployment Configuration" instead of what we change in the DataControl.dcx. So I have a few questions:

  1. Why is there a difference between what we have in the source code and what is shown on this ""Deployment Configuration "screen for manual deployment of JDeveloper? "

  2. where is this "Deployment Configuration" end point url located? I can change it during an automated deployment as I can on a manual deployment?

  3. What is the best practice to change a url endpoint to the Web Service data control with during an automated deployment?

  It turns out that the connections.xml had the url of the endpoint that the profile of the deployment and jdeveloper was referencing at deployment time.

  In order to get our automated generation work, we use a search and replace of Ant utility to change endpoint in this connections.xml before construction/deployment of the application.

• Insert references VI in an empty array of objects

  Hi all

  I shopped, but I can't seem to find the answer to this particular question.

  Platform: TestStand 4.2.0 LabVEW 8.6.1.  Customer resists upgrade.

  I am trying to build a list of VI references to a variable of TestStand.  TS is an empty array of references to object called Step.VI_References.

  BT, I take the context of the sequence (from "ThisContext") and read it as an object of property.  I then take this reference and use it with search GetPropertyObject Step.VI_References.  I have a table of references VI (of type TS. PropertyObject) that I am an iteration more to extract each reference.  It is then to be inserted by using SetPropertyObjectByOffset.  See the attached picture for the relevant bit of code.

  My problem is I'm getting an error-17300 - essentially a "NULL pointer unexpected shipping reference" SetPropertyObjectByOffset call - even with just a reference to be inserted.

  It doesn't seem to be a mistake to place else, but whenever I try to access VI_References in table form (using any table API), it gives the same error.

  What obvious (or subtle) thing I'm missing?

  Thank you

  Geoff

  If these are references, you must use SetValInterfaceByOffset instead of SetPropertyObjectByOffset.

  Hope this helps,

  -Doug

• From bandwidth of endpoints

  Is it possible to have all calls between a MCU and TCS use a bandwidth fixed (2 048 kbit/s), but for all calls with the MCU or TCS between other points of endpoints that are not these two devices will use a fixed bandwidth (768 Kbps).  We use of TMS and a VCS in our infrastructure.

  Examples:

  MCU <> TC - 2048 Kbps

  MCU <> end points - 768 Kbps

  TCS <> end points - 768 Kbps

  Any help to make possible would be great!  Thank you.

  Are you using a VCS? Then check for bandwidth management administrator's guide: links / pipes

  Guess who would be the best place.

  You can also have aliases of different record with different parameters of bandwidth on the TCS.

  Default call pricing on the MCU + define the TCS as the 'End Point' with 2 Mbit/s on the MCU

  and/or set a rate of default reminder on endpoints 768kbit/s or something like that.

  But I'd go with links / tubes model

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/admin_guide/Cisco_VCS_Administrator_Guide_X7-1.PDF (202 pages..)

• Endpoint generic attributes - DAP

  I am setting up SSL VPN on a pair of the ASA for a customer and that you have encountered a problem.  I'm giving special permits via DAP AnyConnect and is one of the criteria that the client wishes to use a partial host name. For example, it would be dskp0w...  Can I use dskp0w * as an attribute?  I'll be on site this weekend and will give it a try, if it is possible.

  No, unfortunately generic is not supported for DAP corresponding endpoint attribute.

  There is a bug in development to support generics for the selection of point of endpoint AV/AS/FW, but not on the host/username name attribute.

• No computing resources associated with endpoints

  Hello

  Total newbie to vCAC. I am building a VINE and I'm following the step in Kendrick Coleman blog. How to install vCloud Automation Center (vCAC) 6.0 - part 5 - Agent, point to endpoint and Group Configuration. Tech blog | Blo...
  I did it to create endpoints where I selected vCenter. The next step is to create a group of fabric.
  However, I can't see and select calculated resources. Any idea what I can hurt?

  See you soon

  I found a few errors in the log. The account I used got a

  The work of VRM recovery: the request failed with HTTP 401 status: unauthorized error

  Not sure why this would be the case, because there on vCenter and IAAS server admin rights.
  Changed to a different account that has administrator rights and rebooted and seemed to be right.

• Endpoint Conifguration

  Hello, I'm configuration vCAC 6.0.1 and I do the configuration of fabric to consume resources.  I did the steps below

  1. I installed the Agent vSphere
  2. I added my user for the tenant to vsphere.local credentials
  3. I added my endpoint references

  But when I go to configure endpoints it does give me a place to add that a new endpoint is there somewhere where I can change my settings for the user to add endpoints?
  

  I think that you don't have your license key.
  Find the license on the infrastructure tab section I believe (if it isn't there, then administration) and enter your license.

  license must be entered here and in the vCAC is GOING

  Hope this has helped.

• How to see my points?

  Can someone tell me where I can find my points, if I have everything?

  Thank you

  Doc

  Hi Doc,

  Can I know which points are your reference here, forum points you have earned? If so, you can move your mouse on your avatar or your name in the forum, and it shows the stats. If this isn't the case, please provide details.

• Can I change a cross-reference without having view to recreate it?

  When the cross refer to the numbers on the same page, I leave the cross point to unique reference numbers ("see view 25"). When it is on another page, I use the paragraph and page numbers ("see 25 page 34"). But when my text changes, sometimes text moves, sometimes move the images and I need to change the cross-reference. It's quite annoying, I have to old rmeove and create a new one in the hunt for the removal of a list of 150 or more.

  Is there a simpler way? For example, put the insertion point in the cross reference, then an easy way to choose a different look?

  There is reference to updated and re-issued reference of choice in the hyperlinks Panel menu. Have you tried those? You can also change the formatting of a reference in Cross Reference Options.