VROps 6.1 - missing dash use

Similar Questions

• Satellite L750-1LC - Boot Manager is missing by using the recovery disk

  I bought a Toshiba satellite L750-1LC and I try to create the DVD 4 to save.

  On the first dvd that only he came an error reading twice, the other DVDs were ok.
  When I try to recover from the DVD the recovery process got stuck on the first dvd so I had to reboot and try again, but the same thing happened to it.

  After you restart the system it came a message that bootmnager is missing and windows and any other thing was gone.

  Is the promotion of "No. Matter What Guarantee" "covering this type of flaws?
  If so, what are the steps to qualify for this promotion?

  I said that I am a Romanian citizen and I have already implemented for promotion in the specified time interval.

  It seems that the first recovery disk is not created properly because you got an error message.
  As I understand your message, you have tried to boot from the first recovery disc (which was not correctly created in the past) and so the installation could not be completed successfully.

  Now, you cannot start the operating system, because the Boot Manager is missing and possibly the system is deleted also
  I see just one solution: order the new disk recovery from here and use it for the installation of the OS: http://backupmedia.toshiba.eu/landing.aspx

  PS: as far as I know that hardware issues are covered by the warranty, software issues not covered by the warranty

• DKIM GIS missing IOS using Server 5 was only messages

  Hello

  I was testing my new Setup DKIM (thanks the kind people at the counter of topic for the implementation of DomainKeys/DKIM on OS x 10.8.x Mountain Lion server...) and I see the DKIM signature on some posts and not others when I get emails from my server to gmail.  I narrowed down it to messages IOS is native, but only those of my own OS X Server 5 accounts.

  Signed examples: (as seen on a gmail account (gmailacc1) using OS X mail indicate headings)

  gmailacc2 to gmailacc1 of MACBOOK

  gmailacc2 to gmailacc1 of the iPhone

  Example UNSIGNED: (as seen on gmail account (gmailacc1) using OS X mail indicate headings)

  serveracc1 to iPhone1 gmailacc1

  serveracc2 to iPhone1 gmailacc1

  In short, he has only signed DKIM missing since iOS devices, but only when from accounts that my server hosts.

  Configurations:

  iPhone1 on 9.2

  MacBook is on OS X El Capitan 10.11.2

  Server is version 5.0.15

  Server operating system is OS X El Capitan 10.11.2

  Differences in header: (I see that DKIM still does not quite right, but that shouldn't be causing this discrepancy-square Advisor if you disagree)

  Next two lines are only in the header of the macbook is from:

  DKIM signature: v = 1; a = rsa-sha256; c = relaxed/simple; d = example.com; h =

  x-mailer: mime-version: date: date: message-id: subject: topic

  : content-transfer-encoding: content-type: content-type: from: to

  : received: received; s = default; t = 1451843424; x = 1453657825; BH = vN

  aAS12lrLmuVbNt9e3bDfxq/890NGY77wOelrIV0cI =; b = LSGPeIY + vQvOHpOJk3

  ZwP8L5NkTgKtWKWrdRK8bBrcx90QV5 + MkghM59IfHH5tD0M7OQ5Q9npCDj + rp7R7

  ZKEdLGm99Zy1Yj9c6swliTZ7MRyq4lZDUaxboZKoTvs9LCg63BsMQejgrQihsmS3

  W00In + uQUEGyflFMmqRNYI/xo =

  DKIM = fail [email protected];

  Besides timestamp, sequence/CR, CR/LF and message of the differences there are a few set lines to update the: (seem insignificant for me)

  iPhone:

  Received: from [192.168.1.2] (server.example.com [123.456.789.123])

  by server.example.com (Postfix) with ESMTPSA C5D641D5A69C id

  for [email protected]>; Sunday, January 3, 2016 10:50:24-0700 (MST)

  MIME-Version: 1.0 (1.0)

  X - Mailer: iPhone Mail (13 c 75)

  MacBook:

  Received: from [192.168.1.12] (unknown [192.168.1.12])

  by server.example.com (Postfix) with ESMTPSA E20431D5A6A6 id

  for [email protected]>; Sunday, January 3, 2016 10:50:24-0700 (MST)

  MIME-Version: 1.0 (Mac OS X Mail 9.2 \(3112\))

  X-Mailer: Apple Mail (2.3112)

  Any help would be greatly appreciated, thank you.

  Hi - I made recently of DKIM on my recently installed OS X 10.11.2 set-up + installation OS X Server 5.0.15. Was on Mavericks + Server 3.x but had done before clean install.

  I found the site with information for the installation of DKIM I followed, with some minor changes - and it worked directly at the exit.

  As you mentioned that you found a different result from an iOS device to a Mac I just tested my iPhone (had done with Mac during Setup) and it went very well.

  There is actually a website, you can send an email and they send back you an email with a very detailed analysis. Here is the summary they send, it's the result of my test of the iPhone.

  Port25 Solutions, Inc. team.

  ==========================================================

  Summary of results

  ==========================================================

  The SPF check: pass

  DomainKeys check: neutral

  DKIM check: pass

  The sender ID check: pass

  SpamAssassin check: ham

  Send an email to: [email protected] and see what you get in return. I can post a tutorial of how I did my configuration if necessary. Would be tomorrow.

  Let us know how you go with the test.

• BlackBerry Bold 9000, Sync smartphone for missing mac using Sync

  just upgraded to a 8800 with a 9000 and I see no end of questions

  I try to sync my 9000 to my macbook using the missing sync, the 8800 t - it no problem just plug-and-play.

  When I try to do with the 9000 the lack of synchronization screen, the battery symbol indicates the load for about 2 seconds and then it comes down to just showing the battery symbol that the phone is not connected to the load.

  When I try to sync the phone missing sync returns an error indicating that the phone is not connected, in the finder, the phone does not appear as a drive.

  So far, I did a soft reset on the 9000, out the battery and restarted.

  I have reset and restarted the Mac.

  I checked to see that I have the latest version of the missing sync software

  everything seems to be in order, but can anyone come up with any other suggestions, I slowly come to the conclusion that the phone is down

  Please see the other thread we have going on this.

  Missing Sync does not work with the "BOLD", even though they say that they "support"... all they do is opening tickets error for all the world and indicating that they cannot understand it. At most, you might be able to get your calendars and tasks synchronization and notes if you only use MarkSpace notes. Nothing doesn't sync properly to the Entourage from, so only use your applications native mac. Contacts are damaged. Sync once and never sync them again - will erase your office contacts.

  If you are using a Macbook (late 2008), Macbook Pro or macbook Air, there is NO support synchronization at this time for Missing Sync and the BB "BOLD". Lack of precise timing are aware of this, they have no estimates for an update.

  If you get no link at all - try to open Missing Sync first, then connect. Try a different USB port. Try to uninstall your old version of MS, and reinstall a new copy after a restart of your computer.

  See the other thread for suggestions and advice. People are displayed the same questions without reading the other, and now we have 3 of them. There is one that is two pages with ideas and experiences of others.

• file ipa iOS missing icons using animate CC & AIR 22

  Ahoy,.

  I'm iOS apps in CC animate and export by air. I don't use Builder, Flex or terminal in compile, just what is integrated to animate. I made a bunch of them in that way and all worked fine until the update of Animate 15.2.1.95.

  The last update seems to be missing icons in the ipa file. When I download on Apple with the application loader, I get these errors:

  -ITMS-90032 ERROR: "path of the invalid Image - no image found at the location referenced under key"CFBundleIconFiles": 'icon - 167.png'.

  -ITMS-90032 ERROR: "invalid Image - no image found at the location path listed under key"CFBundleIconFiles":"[email protected]"

  -ITMS-90032 ERROR: "invalid Image - no image found at the location path listed under key"CFBundleIconFiles":"[email protected]"

  -ITMS-90032 ERROR: "invalid Image - no image found at the location path listed under key"CFBundleIconFiles":"[email protected]"

  -ITMS-90032 ERROR: "invalid Image - no image found at the location path listed under key"CFBundleIconFiles":"Icon.png"

  -ITMS-90032 ERROR: "invalid Image - no image found at the location path listed under key"CFBundleIconFiles": 'icon-small - 50.png'.

  -ITMS-90032 ERROR: "invalid Image - no image found at the location path listed under key"CFBundleIconFiles": 'icon-small - 40.png'.

  -ITMS-90032 ERROR: "path of the invalid Image - no image found at the location referenced under key"CFBundleIconFiles": 'icon - Small.png'."

  -ITMS-90022 ERROR: 'missing required icon file. The package does not contain an icon of the app for iPhone / iPod Touch exactly ' 57 x 57' pixels, to the format .png for iOS versions < 7.0. »

  All these files are included in the project and the xml at the time of the export file, but then when I change the .zip to .ipa extension and look inside, they are absent. I tried this with multiple applications and all have the same result. I also tried 23 AIR beta, same thing. Any help would be greatly appreciated and let me know if you need more info.

  Thank you very much!

  -conor

  Success!

  Here's what I did:

  -Uninstalled animate CC

  -Installed Animate CC which came with AIR 21.0

  -A new look for iOS project underway

  -Copy and paste the content to the new project the previous file

  -Changed the names of icon previous numbers just like how you had them, so e.g. "Icon-small - 50.png" to just "50.png".

  -Published to the app store and downloaded

  Now that was my second attempt after reinstallation.

  The first attempt I does not change icon names and got an error of the icon:

  

  I have always used the name of previous icon, but I wonder if it is what was messing things up in the last update.

  in any case thank you yet once again, I really appreciate it!

• vROPS to LI LI Agent using log shipping

  I am trying to use the solution for recording of vrops to loginsight (Cloud Management Marketplace |) Solution Exchange) and I'm having a few problems, as indicated in this post on the vrops forum... VROPS configuration automatically changes Log Insight (in a bad way)

  There is someone to help these solutions togheter and had the same problem (vrops changing the configuration of li automatically)?

  I had to exclude some cutting, because since my installation of vrops I was getting event per day about 20 million only for the vrops, which are almost INFO/DEBUG.

  Someone at - it a guideline on which configuration can be done?

  It is seems to be only little documentation about the configuration of newspapers... I've seen some articles that talk about the log4j files, but it seems that they reset itself by default if I change the configuration of the interface chart user also.

  Concerning

  Francesco

  Confirmed - Sorry about the back and forth on it. Tests on my end has not happened with 6.0.1. So seems that you can't use the content and user interface pack remote syslog with 6.0.1. Thank you report to us - I will get it tracked with vR Ops team. You opened a pension for this business? If this isn't the case, could you and ensure that it is assigned to the Ops vR?

• Default insertion for missing items using DBMS_XMLSave.insertXML

  Hello
  
  I'm trying to insert default values for some columns, without going through these as column names in the xml document. Is it possible to do? This is the code I use for now, but it inserts null for missing values in the xml document.
  
  insCtx: = DBMS_XMLSave.newContext ("TABLENAME"); -get the context
  lines: = DBMS_XMLSave.insertXML (insCtx, p_xmlDoc); -Insert the doc
  DBMS_XMLSave.closeContext (insCtx); -close the handle

  This approach has any impact on performance, if the xml document is like 10000 inserts line?

  Yes, this could have an impact on performance on large documents because of the transformation in memory.

  The solution of this situation is at the first store the document in an XMLType table (or column) and run the table INSERT.

  Here's a recent thread about this: {message identifier: = 10327556}

  What is your version of the database btw?

• The graphics are missing when using 'Secure Browsing'

  While browsing in secure mode, the graphics on web pages are missing. The area which would normally be a few pictures show is white. The problem also occurs when I go to some new videos. For example, the following Web site:

  http://News.Yahoo.com/video/world-15749633/Peru-s-Lake-Titicaca-threatened-by-pollution-29613431.html

  It is repeatable.

  I went down to 12 of Firefox and the problem was still present. I demoted then flashplayer 11.3 to 11.2.202.233, I got from the adobe web site for my 64-bit windows operating system 7. Now flash works on Firefox 12 and 13. Older versions of flash are located on
  http://helpx.Adobe.com/Flash-Player/KB/archived-Flash-Player-versions.html

• My garageband is missing (currently using yosemite)

  I decided to download stuff on my garageband... I have not used in a few... To my surprise its actually gone... Someone wants to enlighten us... I go to the app store, but apple is looking for $4.99... What the devil? It came with the computer...

  Help, please

  What version of GarageBand do you have?

  If you had 10 GarageBand or GarageBand 11 and it came pre-installed on a Mac without installer DVD, look at the App Store on the purchases tab (the fourth tab), not the AppStore homepage.  Reinstall GarageBand from there. The button to the right of GarageBand should show "install".

  If it lacks the history of your purchases of GarageBand, take a look at this link: hide and expose the purchases in the Mac App Store - Apple Support

  If your version of GarageBand is older and has come on the DVD Installer, look for these installation media. Then you can not reinstall it from the App Store for free, because here, you can download the latest version of GarageBand 10.1.1 and is not a free update to GarageBand 11 but a new major version.

• Drive D is missing after using the recovery CD

  Hello
  This is my first time using the toshiba forum! My problem is that after that I used the recovery cd and rebooted my laptop, I can't find my D drive!
  I have a P100-277 100 GB HDD divided in drive C and D, now only 100 GB on my C drive.

  What can I do to get my D drive?

  Thank you very much

  Hello

  You have probably chosen standard recovery option. Standard recovery option erases the entire HARD disk and creates a partition. How to save the contents of the previous drive D is the right question.

  I've never done it before, but I'm sure you can find some tools on the net or PC magazine. Will you please Google around and I'm sure you'll find something.

• NTLDR is missing after using the recovery disc - Satellite A100-493

  Hello

  I come from Germany and I have a Toshiba Satellite Notebook, which I bought new in 2006.

  After nearly three years, he started showing problems and slow, so I backed up my files and inserted the "Product recovery" CD that came with the laptop. I followed the Instructions and it began to unwind. After that about 1%, it displays a short Error Message, which I was not able to write down again and stops.

  When I restart the computer says ist «NTLDR is missing, press Ctrl + Alt + Delete to restart» When I do that it shows me the same "NTLDR is missing" Message, no matter how many times I reboot the thing.

  I tried to redo the whole fotmatting, but it always comes out the same way. What di - I do?

  G Demolidor

  It's very strange. If the recovery disk is not damaged the only reason for interruption of the installation may be faulty HARD drive or some problem there.
  If possible, try to get Microsoft WXP CD facilities and try to install Windows XP Home edition.

  Please let us know if the installation completes without any problems.

• Error msvcp90.dll missing when using Photoshop element 13 after installation

  Original title: Missing msvcp90.dll

  I have windows 7 Home premium. I tried to install photoshop elements 13. He says that the installation is successful. I try to start the program, and he says: ' cannot start because MSVCP90.dll is missing on your computer. " Try to re install the program to fix this problem. "I've lost track of how many times I did it. I installed the C++ 2008 service pack 1 redistributable security update because he was supposed to have the .dll file - no go.  I updated my scan of malware and virus woindows done also. How can I get this operational programme? Thank you

  Hello B.cobb,

  Thank you for your response.

  Looks like there are corruptions of important system files. Logs show a number of .dll file missing or corrupt.

  Reset the default Windows Update components.

  Also reset Windows Update components repair several DLLs and other important system files. Reset Windows update ventilation includes reset services required for updates Windows and Winsock, reset the proxy connection, if any, the queue of BITS of compensation and installing the latest Windows Update Agent.

  Run the troubleshooter automated in the link below to reset Windows update default components, if the troubleshooter does not solve the problem please follow the manual steps in the article below to reset Windows Update components manually.

  How to reset Windows update components?

  http://support.Microsoft.com/kb/971058/en-us

  After resetting correctly update Windows components check running SFC scan once more and then check with the question.

• inventory of missing vCenter using the web client?

  I just upgraded my environment to 5.1 and for some reason, one of my vCenter servers shows no inventory by using the web client. I double checked the permissions on both sites and have checked the inventory in the vSphere client and everything seems good. I have two related modes and the other shows, everything is fine. I tried repointing and re-application as in accordance with article (KB VMware: repointing and re-application VMware vCenter Server 5.1.x and components) but all exits show as being already recorded. Any ideas?

  

  Thank you.

  This is the expected behavior for the operation of the Service of the inventory.

  Searches in the vSphere Client works perfectly?

  Take a look at the following kb NOT to DO ALL THE STEPS IN THERE!

  http://KB.VMware.com/kb/2033620

  Only follow re-register vCenter Server with the Service of inventory for now, if the search in vSphere Client function does not work correctly.

  
  

• Tecra M5: ConfigFree profile missing autoswitch using Vista

  I am running Win Vista on my Tecra M5, but can't seem to find the setting to activate the profile Configfree detector.

  On Windows XP, this definition has been in configfree, allowing you to switch automatically to a specific network profile depending on what network wifi is detected. However, in Vista this feature seems to have disappeared in configfree.

  I am running ConfigFree Version 7.00.23.

  I believe that the function is not available under Vista, due to a technical limitation if I remember correctly.

• Desktop icons missing when used without network domain

  I have a mystery involving laptops who lose their icons on the desktop when the user opens a session.  The scenario is as follows: If the domain network that has essentially the 'copy offline' is NOT available at the time of the log, and if the user is connected to another network in the home or travel (regardless if LAN or wireless), they will not receive their desktop icons.  To date, we need to make sure that these users cut their 'Wireless' and make sure they unplug his ethernet cable before they log on to the computer.  By doing this, their desktop icons appear very well.  Once their desktop computer is done loading, we have them re - connect their ethernet non-domaine cable or turn on their "wireless".

  I'll go a step far from adding the wireless switch must be in position 'ON' when a user opens a session, but as long as the laptop is not in the range of all configured previously wireless networks, it will load the icons very well.  It's almost as if whenever Windows 7 sees ANY network connection, it says: ' Hey, here's a network access, so it must be the network I need. "
  And finally, if the user is connected to the domain via the ethernet cable network, BUT their without wireless is enabled and there is a connection to our router Comcast wireless, it still will not load the desktop icons.
  I don't know if it's a Windows 7 problem, a field/group policy issue or a setting of strategy/local on the laptop.

  Hello

  Note that your computer is under domain, you must contact the TechNet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads