vROPs - you can create a report to show when a virtual machine has changed and what has changed?

Similar Questions

• You can create a view that filters (ESX host) Linux machines on the view of the Infrastructure?

  Hello

  We have recently implemented Foglight and VMware plugin. As part of the VMware plugin, Foglight pulls in all the Linux VM machines including the ESX host. Our team of Linux only manages the running redhat Linux hosts. They fail the ESX VM guest. That said, is there a way to create a view that shows only the hosts running redhat Linux?

  For example the view of rail infrastructure below contains 88 Linux machines, but nearly half of them are ESX hosts for our Linux team would not see all these. Is it possible to filter these?

  

  Any help is appreciated.

  Thank you

  Tony

  The easiest way would be to create a personalized, pair it with Infrastructure and then create a dynamic management component.  This will help create you a rule for "All hosts" where you can find just the hosts that are not of the ESX host and run Linux.

  The query would be:

  detail.topologyTypeName! = "VMWESXServer" & os.longName like «% Linux»

• You can dial space provisioned end back to a virtual machine after the fact in vCenter

  I know you the converter stand-alone to get there, but I can't seem to do this in vCenter himself. Basically I have a model of Windows operating system that has a vDisk containing the boot partition thin value 100 GB provisioned. It is in fact only using a little less 15GB and I want to do this cut in half and make it thin 50 GB provisioned. What is the best way to do that is clean?

  Alternatively, you can use vmware to the fret converter

  Frank

• How can change the end of thick disk when a virtual machine has been placed on the disk?

  After you have moved the virtual computer to another stage, chose the thin disk bad. Now, the virtual machine cannot start. the error message says that it must be thick for clustering. So, I need to change it back if possible. Then I moved it back and thick chosed. But, after that, I got a same error. So, after you move, the atatuse disk was not be changed. Is it a way not both directions? How can change the staus thin to thick?

  Thank you!

  George

  Hello George,.

  You can also convert virtual disks in eagerzeroedthick from the command line.

  vmkfstools-j VMname.vmdk allows to convert a thin disk in eagerzeroedthick

  vmkfstools k VMname.vmdk that will do it on a thick disk

  It can also work for a thin disk, click with the right button on the vmdk in browser data store, and then click 'inflate '.

  André

• Determine when a virtual machine has been created

  All,

  I need help to determine what VM 2 were created. Help, please. Can someone help me with a script?

  I have attached a simplified version of this script, it is up to 1 year.

• You can create an index on a map?

  I have a few questions that I can't understand, or find a viable for example. You can create an index for a card, contained in a nested object, and if so, how would you do that? I have currently a filter inspected this criterion in the cache, but I am unable to understand to create an index of usabe for the custom filter. I use coherence 3.5.2 - any help would be most appreciated. I don't know if / what should I do with the SimpleMapIndex...
  
  Here's the Basic object below map. My filter retrieves all objects of ClientType with a client in his collection that contains the past in integer value in the customer's card. So can you create an Index on a card (and a nested to it) and how do you this? The index should be on the nested customerValues hashmap.
  

  class CustomerGroup
  {
      Set<Customer> customers ;
  }
  
  class Customer
  {
      Map<Integer, CustumerValue> customerValues;
  }

  If you write a custom, ValueExtractor you need to create an index, then you will not have a custom filter.

  Depending on how effective it must be custom Extractor you can use POF and don't have to deserialize the entries to create the index, or it can deserialize the class, which will make the code simpler.

  For example, without the use of POF

  public class MapKeyExtractor extends EntryExtractor implements PortableObject {
  
      public MapKeyExtractor() {
      }
  
      @Override
      public Object extractFromEntry(Map.Entry entry) {
          Set keys = new HashSet();
          CustomerGroup group = (CustomerGroup) entry.getValue();
          Set customers = group.getCustomers();
          for (Customer customer : customers) {
              keys.addAll(customer.getCustomerValues().keySet());
          }
          return keys;
      }
  
      @Override
      public boolean equals(Object obj) {
          return (obj instanceof MapKeyExtractor);
      }
  
      @Override
      public int hashCode() {
          return MapKeyExtractor.class.hashCode();
      }
  
      @Override
      public void readExternal(PofReader in) throws IOException {
          super.readExternal(in);
      }
  
      @Override
      public void writeExternal(PofWriter out) throws IOException {
          super.writeExternal(out);
      }
  }
  

  The extractor above returns a collection of all the integer values in the keys to all the customerValues of all customers in a ClientType (I guessed you have some accessor methods on classes that you posted).

  You can then use a ContainsFilter for your query. For example to get all values in the cache where the customerValues card contains a 19-key...

  Set results = cache.entrySet(new ContainsFilter(new MapKeyExtractor(), 19));
  

  You could write a version of the MapKeyExtractor which uses POF and wouldn't not deserialize values, but it's more complicated code, because should extract the POF of value stream map and go down the keys and values extract the key. It's doable, but not worth it unless you're really worried about the execution of updates of the index.

  Discalimer I wrote the code over the top of my head so have not compiled or tested, but it should be OK.

  JK

• Can I create an event to show when someone connects to a required program file, such as our timing?

  Can I create an event to show when someone connects to a required program file, such as our timing?

  Hello

  Thanks for posting your query on the Microsoft Community.

  I suggest you re-post your query on The MSDN Forums , because we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.msdn.Microsoft.com/forums/en-us/home

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• How to add a new document type to those that you can create by right-clicking on the desktop window or fodler?

  When you right-click on the desktop or the window displaying the contents of a folder and select 'New', you see a list of the types of documents you can create. How to add and delete?

  When you right-click on the desktop or the window displaying the contents of a folder and select 'New', you see a list of the types of documents you can create. How to add and delete?

  With regedit , you can see a lot of extensions of files known, for example, HKEY_CLASSES_ROOT\.txt for txtfile.   To get rid of the "new extension" option in all of the folders that you can rename the key HKCR\.txt\ShellNew to HKCR\.txt\ShellNew.disabled or similar.

  Some applications can open empty files, for example, Notepad can open a (new) empty text file.  For the purposes of C:\windows\shellnew which is indicated by an empty string (REGSZ) NullFile.
   

• trial version you can create subtitles?

  on the trial version you can create subtitles?

  Hi Julian,

  Yes, you can create subtitles in Premiere Pro (trial).

  Learn how to work with captions in Premiere Pro

  Thank you

  Ilyes Singh

• You can create an online version for pc?

  You can create an online version for pc?

  With a Pro account or company DPS, you can activate the Social sharing feature and display DPS items in the web viewer on a PC. More info here:

  http://helpx.Adobe.com/Digital-Publishing-Suite/help/using-social-sharing.html

• You can create a search button in an interactive PDF?

  Is it possible to create a search button in an interactive PDF? Our client does not want to use the adobe reader search (CTRL F) and instead want a personalized with in the actual PDF search bar. We use Indesign 5.5 and that you do not have adobe acrobat X.

  Any ideas / help would be greatly appreciated!

  You can use the built-in search window and use something like this:

  var textToSearch = app.response ("enter the search term :");

  If (textToSearch! = "" ") search.query (textToSearch,"ActiveDoc");

  Or you can use a text field (let's call it the search term) and a button that runs this code:

  var textToSearch = this.getField("Search_Term").valueAsString;

  If (textToSearch! = "" ") search.query (textToSearch,"ActiveDoc");

• You can create an application iPad w / two H & V layouts without creating copies of everything?

  You can create an application iPad w / two H & V layouts without creating copies of everything?

  You must make separate models for H and V.

  Neil

• You can create a table of contents with page numbers using bookmarks?

  You can create a table of contents with page numbers using bookmarks?

  Sometimes a long article has bookmarks to help navigate, it but has no real TOC (table of contents) on the first page. In such a situation, I think that it would facilitate the reading of the paper version if you can somehow create a table of contents with page based on hierarchical bookmarks in the document numbers.

  If this is not possible from Acrobat, is there a third party app?

  Indeed you have created a script for this - sorry that I missed it. I should have...

  Acrobat - Create TOC bookmarks

• Adobe Bridge - you can create custom meta tags

  Hi, this question is on Adobe Bridge. You can create your own meta tags? I want one called "Caption" not "Description." It is therefore through, he shoots the resource space where our org share photos.

  Thank you

  Jac

  You can create your own meta tags? I want one called "Caption" not "Description."

  It is not possible because Photoshop and Bridge use the same file information that are based on the world standard IPTC and they use description for this field.

  However, in practice, many applications DAM respect despite their name or can be configured to read the info in the description and place it in the appropriate field (some call it legend, other notes etc.) for your DAM-based application company.

  Hope this will help you a little.

• You can create a datamerge at the editing table?

  Using InDesign CS5 is anyway that you can create a datamerge at the editing table?

  I want to place the file number in the section of purge for the series of newspaper advertisements. When I try to create a merged document, I am informed that there are no placeholders are present even if I added in the mount table.

  Someone at - it solutions?

  When you configure the placeholder, set the text to get to the bottom of the text box and stretch the text box so that it touches the print area of the page.