Vs System Windows Backup restore

Similar Questions

• Windows Backup & restore good?

  Is built into the Windows Backup & restore a good program to use to back up the pc?

  Or suggestions on those possibly 'better '?

  Hello

  Personally I prefer to use programs third 3rd for backing up the computer

  There are a number of 3rd party programs available for a full backup of the computer; others, you must pay for, some are free.

  This program must be purchased:

  "Acronis True Image".

  http://www.Acronis.com/homecomputing/products/TrueImage/index_gwo.html?utm_expid=4274314-6

  These are free programs for the protection of the computer:

  "EaseUS Todo Backup free"

  http://www.TODO-backup.com/products/home/free-backup-software.htm

  "AOMEI Backupper Standard for Win7.

  http://www.backup-utility.com/aomei-backupper-for-Windows7.html

  "Download Backup & Recovery 2012 free FREE!

  http://www.Paragon-Software.com/home/BR-free/download.html

  «Macrium Reflect FREE Edition»

  http://www.Macrium.com/reflectfree.aspx

  See you soon.

• Windows Backup & restore leaves gaps in the backup period date ranges

  I noticed that backup & restore leaves gaps in the date ranges displayed on the screen of backup periods under the function to manage the space.  This means that files change during the interval periods have not been saved?  For example, the screen shows currently backups and the following periods:

  Jan 26: 12-18 Mar, 12 GB 10.40

  Apr 04, 12-13 Apr, 12 GB 19.62

  27 April, 12-27 Apr, 12 GB 05.16

  May 06,12 - May 06,12 02.41 GB

  May 27.12 - 17 Jun, 12 GB 03.41

  What is the importance of gaps?

  How can I tell that B & R is fully backup all files that changed since the last backup run?

  How can I varify the 1st backup is a backup full?

  How can I varify that the system image backup is up-to-date?

  I save approximately once a week to a USB external hard drive. I use options "Include a system image" and "Let me choose" to select the files and have selected the option 'keep only the last frame system & minimize the space used '.

  Hello

  Backups are created in sets called backup periods. To maximize your disk space, Windows backup backup all folders selected, the first time it's run and then it only backs up files that are new or have been modified since the last backup was made. Periodically, Windows creates a new, full backup. Each full backup is called in a backup. When you view your backups of files, you can see all the backup periods with date ranges. If you decide to delete backups of files, you should always keep the most recent backup of the file.

  Reference:

  Should what backup settings I use to maximize my disk space? http://Windows.Microsoft.com/en-us/Windows7/what-backup-settings-should-I-use-to-maximize-my-disk-space

  Back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restore

• Pavilion dm4-3090se: how to use the SSD after restoration of the system of Windows backup disks?

  Hello

  After a lot of work, I finally could restore my OS using Windows backup disks that I created a few years back. (The OS has been corrupted when the power has been accidentally deleted from the system and the battery was dead)

  Restoring backup widows put everything on 444 GB C drive.  Nothing I put on the SSD drive d:-20 GB and there is nothing in the tools of HP E: drive - 4 GB

  How can I make use of the SSD drive to help speed up the system?  I see the system starts and runs more slowly now.  I'm ready to blow the current operating system and re-run the Windows backup utility.  But I need to know how to use the SSD during the restoration.

  Any help is appreciated.

  Thank you

  Bob

  Hey @llebrez,
  
  Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

  I understand that you have some information about using the SSD in your HP Pavilion dm4 Beats Edition Entertainment Notebook. I'd be happy to help you with that.

  The SSD in your laptop is used for a technology called Intel Smart Response. Intel Smart Response uses the SSD as a type of Cache smart to help load the items faster. The reason why that is not used currently is because the restoration of the system is not designed to use the SSD for intelligent caching and is not able to establish that on its own.

  If you want to configure Intelligent caching on your laptop, you can follow this guide provided by overclock.net: how: implement the Intel Smart Response Technology (SSD caching)

  I hope this helps. If you have more questions that I'm able to answer for you, please do not hesitate to ask.

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!
  
  See you soon.

• I had to do a full (out of the box) system restore. Before that, I did a complete backup of dvd by using Windows backup center and restore...

  Windows Vista 64-bit
  I had to do a full (out of the box) system restore. Before that, I did a complete backup of dvd by using Windows backup center and restore. I'm now trying to restore my files however, I get an error message that says the missing user account... "files that you are restoring have security permissions to a user account that is not found on this computer. The missing account is shown below... Dad-PC\ADMIN."the problem is, that a user account name cannot contain the"------"what to do? Thanks in advance!

  Hello

  at the end of my 1st response is a link to the appropriate forum for these questions

  If you have problems, it's in here is a forum for microsoft at the link specifically for backup questions below

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Backup center and restoration', 'System', 'Windows Update', 'Power Options' and a few others in Control Panel not responding

  Original title: clicking on but nothing happens

  When I select "backup and Restore Center', 'System', 'Windows Update', 'Power Options' and a few others in Control Panel, nothing happens. Sometimes a window flashes for a split second before disappearing. Any suggestions?

  Hi Ron68PB,

  1. you remember to make changes to the computer before this problem?

  2 are you able to open other programs?

  3. do you get error messages or error codes?

  Method 1:

  You try to run a SFC scan to check the corrupted system files.

  You can read the following article to launch the SFC scan:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Alternatively, you can try to check if the problem occurs in safe mode.

  Check out the link:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer

• Windows Backup and Restore always fails when you create a system image.

  When I run the Windows backup, it works fine until it gets to create a system image, it goes for about a minute then says "Done creating System Image" then the progress bar turns red. I've already defragged, virus research and checked to find errors on the disk external drive all come with nothing and no help.

  I found this suggestion but have no idea what that means or how to do

  Number 4: Error Code 0 x 80070003.

  If the reparse point is a mount point or a junction point to the root of another volume, you may experience the following issues when you try to restore the files under the reparse point:

  • You cannot restore to the original location if the reparse point directory is removed.

    To work around this problem, re-create the reparse point directory.

  • You cannot restore to another location if you click to select the box restore files in their original subfolders in the file restore wizard.

    To work around this problem, clear the check box restore files in their original subfolders when you run the wizard to restore the file.

  Do you think that would help and please tell me what to do, it's all so frustrating when you have no idea what the jargon means or where access things.

• I could do a system backup/restore through the eRecovery without any additional software utility?

  I have an Acer Aspire One 532 H Netbook. I could do a system backup/restore through the eRecovery without any extra utility of Windows 7 to Acer recovery? If I have such software, how can I get it? Because my netbook not came with any utility recovery/program when I bought it. Need to respond as soon as POSSIBLE, my netbook is dying with the longer startup time and more.

  Nice day

  You must back up your data to an external HARD disk, etc. To reload your factory machine, click Start, all programs, acer erecovery management, restoration and completely restore the factory settings.

  Kind regards

  FReeZA

• My hard drive has been replaced. I want to restore a backup made on an external drive, using Windows backup software.

  I get to the step "to install the management of removable storage on Windows Server 2008

  1. Click Control Panel and then click on Administrative Tools.
  2. Open Server Manager, navigate to the features summary section and click add features.

  It is the section on the recovery of an old version of Windows.  My situation is all on Windows Vista.  Maybe I shouldn't use these intstructions.

  When I get to this step I can't find Server Manager.  I opened everthing under admin tools, and there is nothing that looks like this.

  If I go to this issue the wrong way, what should I do next?  The system has recognized my hard drive on Windows Explorer, but when I said retrieve the backup, it says that there is no backup file.

  Hi poudrc,

   
  I suggest you to follow the steps in the link and check if it helps.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup
   
   
  You can also check out the link below.
  Back up and restore: frequently asked questions
  

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

   

   
  I hope this helps.

• Windows 7 backup system Image - 0x8078012D error Code - fails to complete system image backup?

  I seem to have a problem with the Windows backup when a scheduled backup image on a hard drive external fails to finish, although she worked successfully before many times.  Backup Windows reports an error code of 0x8078012D.

  I ran the tool of error checking on the external hard drive with running repair options, but no problem discovered.  The external disk drive seems ok because I use a Norton program to back up data on the same drive with no problems.  Also Windows backup will happily make a 'non-system image' backup on the external drive.

  But it is not an image of the system stand alone, or as an add on the a normal backup.

  Any advice?

  Thank you
  David

  After many tests on the solutions listed here, I found a way to fix my problem. I had continually failure is to say the system could not create a snapshot or that my drive has been a failure. It seems, with Windows 7, you must configure options that are not obvious to the users.

  1. go to control panel/system/System Protection and select your C: drive.

  2. Select "set up" and make sure "Restore system settings and previous versions of files" is on.

  3. the Max use value at least 2%

  4. apply

  5. Select your key USB you will use for backup and configure it again to the protection and the whole file size of at least 18%.

  6. apply

  7. in the control panel go to administrative tools, open Services.

  8 scroll down until Windows backup and make sure it is set to manual and not started.

  9. highlight Volume Shadow and make sure it is also set to manual and not started.

  10 10 aller go to control panel, select backup and restore.

  11. click on "Change settings", and then select the drive you will support up to.

  12 run backup let the system do its thing and everything should work.

• Restore files after restoring the image using Windows backup

  Running W7 pro 64-bit. Had the problems of virus/malware, finally restored my discs from image system, dated 2 weeks ago and then restore backup files dated Windows from yesterday.

  When I go to save / restore my files, the update does not list a backup happened 2/14, the date of the restored image. When I go to manage Windows backup disk space, and then select backup period to remove the last date is 3/1, when I did the last backup. The date & time system is running with a date of 3/2.

  How can I fix it?

  Hello

  Thank you for visiting Microsoft Community.

  As I understood it, you experience the problem with changes to date during the restoration of files after restoring the image using Windows backup on the system.

  Certainly, I understand your concern.

  I suggest refer you to the articles below and check if that helps.

  Backup and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/back-up-restore-FAQ#1TC=Windows-7

  Restore files from a backup

  http://Windows.Microsoft.com/en-us/Windows/restore-files-backup#1TC=Windows-7

  Note: The article above will help you restore backed up version of the files that are lost, damaged, or changed accidentally. You can also restore files individual, groups of files, or all files that you have saved.

  Recovery and data backup

  https://msdn.Microsoft.com/en-us/library/bb727010.aspx?f=255&MSPPError=-2147217396

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Back up and restore the question: system image backup does not show all by backup, but, but still it is there on this disc 'G '.

  Issue of OP - backup and restore

  Hello Forum,

  Recently by doing some interviews I found something strange, almost a week ago, I did a backup image of the system disk. Today, I was looking for the backup image, it seems there is no picture, as you can see on the screenshot attached No.1 he says there are no backups saved to this location, so I clicked on "select another backup...". "but nothing has been found as you can see on the screenshot No. 2, but it is still there on this disc 'G' as selected on the screen n ° 3.

  This image is useless? Shell I have delete and make a new one?

  Answers will be appreciated

  Thank you

  Motiman

  

  Hi Motiman,

  Thanks for posting your query on the Microsoft community.

  We understand the inconvenience caused and we will try our best to solve the problem.

  This problem may occur if the backup system image files is not created correctly or may be corrupted.

  I suggest you try again to create the system image backup and check if it helps.

  Refer to the following Microsoft Help article, which explains: how to create backup system Image in Windows 7.

  http://Windows.Microsoft.com/en-in/Windows/back-up-programs-system-settings-files#1TC=Windows-7

  For more information about the backup system image and recovery, see the link below:

  http://Windows.Microsoft.com/en-us/Windows/back-up-restore-FAQ#1TC=Windows-7

  It can be useful, we meet with the status of your question. We will be happy to help you.

• Using a System Image to restore a computer HP in Windows 8

  Hi all

  I would like to bring to the attention of all the latest HP help video for PSG.  It shows how to use a System Image to restore an HP computer in Windows 8.

  Learn how to restore your HP computer by using an image system Windows 8. With Windows 8, you can backup all the files and setting on your computer at a time and save it as a system. If you ever have a software problem, you can restore your PC back to exactly as it was when you created the image of the system.

  For other helpful videos, go to hp.com/supportvideos or youtube.com/howto4u.

  I hope this video helps.

• Planning Protection System (Backup/Restore Points)

   

  It's actually a repeat of my previous post unresolved since a couple of months.  I want to program creating AUTOMATIC backup/restore by 'System Protection' points.  I don't know of DATA BACKUPS.  I just "let the question slide"... pending, until today when I received an e-mail inquiry HP which brought me back to the question.  I decided not to continue the previous thread, because it degraded in my frustrating rantings.  Here is my original post.

  . . .

   

  I have a HP Pavilion Elite HPE-110 t, Windows7 Home Premium computer.  I want to change my schedule for the creation of the Protection system of backups of the system (not the data files).  It seems that it is currently set for monthly backups (unless, I suppose, a '' significant '' event occurs).  In accordance with the recommendations of the new documentation of the computer, I have not shut down the computer during the night; I let it go to sleep so that automatic "tricks" can occur on the calendar.  Occasionally, the next morning, he has rebooted & waiting for my password.

  I just had a problem with the icons on the desktop freeze... has not responded to the command.  I considered what to do a system restore, but in my research, I was told that there is no restore point.  I started to panic... I didn't know that the magic words were "system protection".  Now, I think that what I was told was that my data had not been automatically saved.  Finally, I took a deep breath and restarted.  Fortunately, which fixed the problem of the frozen... icon but he left the more serious problem of no backup/restore points.  I dropped everything & began to study.

  Finally, I ran into Control Panel / System / System Protection & found 2 points, including 1 that is apparently automatic around midnight the 21st of each month restoration.  I decided to increase the frequency of twice a month.  But I'm only the DVD RW drive to a backup destination.  This is not what I want.  I want the same destination (original) does not change. I guess that's the drive C (or D-Drive).  All I want to do is change the programmed frequency.

  I used before backup/restore points on other computers without problems.  Everything was pretty simple & straight forward.  What I'm missing here?

  Thanks for any help that can be provided.

  Hi Jim,.

  Well I think I have a solution.  It seems that Scheduler tasks won't that create 1 catering point in a 24 period time - after 24 hours has passed, it will create another since the first trigger, which becomes valid.  Forinstance so (after 24 hours), if the trigger is to create a restore point at startup and at 09:00, if you started the computer at 08:00 a restore point will be generated and relaxation at 09:00 will be ignored.  That is why, in a time which is within 24 hours of the last created Restore point does not work.  In the screenshots following are parameters that should allow you to set a time for your restore point planned to create.  There is a way to check if it works - after setting the calendar, you must remove the existing restore Points.  Then, you should find that the next outbreak valid (ie the defined time period) will now create a restore point as shown in the last screenshot.  Details on the removal of the existing restore points is at the end of the third screenshot - just remember when setting the time you want your restore point to create, give yourself plenty of time to edit the task and remove the existing restore points.

  

  

  

  With the above setting is applied, Task Scheduler to close, open windows control panel, open system, click on the System Protection link, click on configure and then click on Remove to remove the existing restore points.  Once completed, just wait the time set the trigger to activate.  After a few minutes, you should see the task is executed correctly and created a restore when you - these are my results below.

  

  

  As you can see, the Restore Point reports correctly that it was created at 19:50, the time that I put in the Task Scheduler.

  If you have any questions in this regard, please let me know.

  Kind regards

  DP - K

• My Windows 7 Pro system has some serious hardware, internet connection and security issues. The system image and restore the system in case of failure.

  My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  My efforts to remedy by restoring a system image backup failed.  At this point, I'm ready for a new clean install if I have to buy a drive to do.  My question is whether a professional Ultimate upgrade will or will not fix these bugs.  In addition, what is the cause of restoring the system to fail?  I never turned off or cannot create regular restore points.

  Original title: upgrade a "Fix" for existing system problems?

  My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  My efforts to remedy by restoring a system image backup failed.  At this point, I'm ready for a new clean install if I have to buy a drive to do.  My question is if an upgrade to Professional Ultimate will be or not correct not these bugs.  Also, what is the cause System Restore to fail?  I never turned off or cannot create regular restore points.

  Hello

  1 re-installing/repairing software will not fix hardware issues.

  2. the operating system upgrade is not the way to solve computer problems that can be carried forward.

  3 1. If you use Norton, you should disable Norton inviolable Protection before using System Restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  AVG will cause problems with SR too.

  «Temporarily disable AVG»

  http://www.Avg.com/ww-en/FAQ.Num-3857

  2. try to use Safe Mode system restore.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  "Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________

  We really need for more details:

  "My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  See you soon.