VS2012 problem of configuration and deployment with scatter chart

I've recently updated one of my programs of VS2008 to VS2012.  I also had Measurement Studio 2009 and upgraded to 2013.  Since Microsoft dropped its installation and deployment in VS2012, I'm looking to use Flexera Express to create an installer.  My app contains a form that contains a scatterplot graph control that must be deployed on both Win7 and XP computers.  I tried to force the compilation to .NET framework 4.5, but that only supports XP.  I demoted the .NET framework down to 3.5.  I noticed that I had to change the references OR whenever I changed the .NET framework.  I only had references to the NationalInstruments.UI, NationalInstruments.UI.WindowsForms and NationalInstruments.Common.  When I build the installation it requires me to explicitly declare the redistributable packages.  So I chose the package OR Measurement Studio Windows Forms Support and automatically selects the load at the time of Design and common User Interface Support (dependencies I guess).  But after I create this version of installation and install it on a system, I get the following message when you attempt to initialize the scatter chart control:

Could not load file or assembly 'NationalInstruments.UI, Version 8.9.35.246, culture = neutral, PublicKeyToken = 18cbae0f9955702a' or one of its dependencies.  The system cannot find the specified file.

Y at - it a redistributable package I'm missing?  I tried to add the base components for the execution of Measurement Studio, but get the same error.

I tried to use Wix, but ran out of patience, trying to figure out this one.  Any help is greatly appreciated.

In general, when controls utilities deploying Measurement Studio you refer to this documentation for the required dependencies for the merge modules:

http://digital.NI.com/public.nsf/allkb/6677098983C36F9086256CFE007F457A?OpenDocument

Tags: NI Software

Similar Questions

  • [SOLVED] Problems of packaging and deploying an application in an external WLS ADF

    Hello.

    I use JDeveloper 11.1.1.7.0, who has a WebLogic Server embedded 10.3.5.

    When I test my application by right clicking on my page and run... in WLS on-board, everything works perfectly.

    It works with any page and any flow.

    Now, I have to deploy the same application to an external 10.3.6 WLS

    First of all, I have the application package in one EAR to aid Assistant JDeveloper. I did right click in application-> Deploy-> MyApplication...-> select deploy ear...


    Then, when .ear file is built, I run startWebLogic (I have already created a domain with the ADF operating options) and deploy the .ear as an app.

    I have a lot of warnings, but the final message is deployment is ok.

    It is therefore my surprise that I get a NullPointerException in the first page I test in the first access to an ADF/view iterator in the Java class:

    DCIteratorBinding iter = ADFUtils.findIterator("BusinessDataView1Iterator");
    ViewObject vo = iter.getViewObject(); -- iter is null
    
    
    

    This had worked many times in embedded 10.3.5 WLS.

    10.3.6 WLS console output is:

    19-feb-2014 15:04:26 oracle.adfinternal.controller.metadata.MetadataServiceImpl$Bootstrap logActivityWarnings
    WARNING: ADFc: /WEB-INF/adfc-config-reportes.xml:
    ...
    ...
    
    ...
    ...
    ADVERTENCIA: ADFc: /WEB-INF/adfc-config.xml:
    19-feb-2014 15:04:26 oracle.adfinternal.controller.metadata.MetadataServiceImpl$Bootstrap logBeanWarnings
    ADVERTENCIA: ADFc: Se ha detectado una definicion de bean gestionado duplicada para 'backing_views_administracion_inicio'.
    ...
    ...
    
    ...
    ...
    19-feb-2014 15:04:30 oracle.adfinternal.controller.util.WebAppConfigFactory createConfig
    INFO: ADFc: Se estß utilizando la vista '<null-value>' como la pßgina inicial de la aplicaci¾n.
    19-feb-2014 15:04:32 oracle.adf.share.jndi.ReferenceStoreHelper getReferencesMapEx
    ADVERTENCIA: Incomplete connection reference object for connection:MY_DB_JDBC
    19-feb-2014 15:04:47 oracle.adfinternal.controller.application.AdfcExceptionHandler handleException
    GRAVE: ADFc: al manejar una excepci¾n, el manejador de excepciones de la aplicaci¾n ha devuelto una nueva excepci¾n.
    java.lang.NullPointerException
            at com.mypackage.Gestion.<init>(Gestion.java:37)
    
    
    
    

    Between the sections of points, there are similar warnings.

    I checked the .ear files (contains a .war), decompression it (the .war too) to a different folder and look for duplicates in text in any file and adfc - config.xml does exist only once in the .ear

    How can I solve this? Someone have had similar problems during deployment in an external WLS?

    Any help is very much appreciated, because this is so stuck to me, and it is urgent too.

    I thank in advance. Concerning

    Well, I finally solved my problem.

    The steps are:

    Finally, it works.

    Now, let me ask another question.

    I have change the DB connection (not the name, is not posible) to another user in the same DB schema. I want to check if the application still works and it does. But why? My test is right?

    Thanks Timo. Concerning

  • CS5 built and deployed with "Disable AAM."  How to enable updates without having to reinstall?

    I used Adobe Enterprise Deployment Manager to create a package Design Premium CS5.  Now 6 users who have received this package report that they cannot update their own facilities.  I realized that a default build configuration has the box checked ' disable the MAO"!

    In the package build itself, there is a file called "optionxml.xml" that contains a line about updates, with a "remove = true" indicator is defined.  This seems to be only configurable during compile.

    Is it possible to change this on customers, once it is deployed, without having to reinstall the suite?

    Adobe has a TechNote to disable the AAM, the procedure might work in reverse, that is, to find and delete/rename AdobeUpdaterAdminPrefs.dat. See http://kb2.adobe.com/cps/850/cpsid_85016.html for more details

    The computer-wide disability

    To disable access to updates for all users on a given computer, administrators can create an admin preferences file. (This file disables access to updates both the help > menu updates, as well as automatic update of controls.) Create a text file named AdobeUpdaterAdminPrefs.dat with the following content:

    
    
         
    
         1
    
         
    

    Place the file in the following location:

    Mac OS / Library/Application Support/Adobe/AAMUpdaterInventory/1.0/AdobeUpdaterAdminPrefs.dat
    Windows XP and above C:\Program Files\Fichiers files\adobe\AAMUpdaterInventory\1.0\AdobeUpdaterAdminPrefs.dat
    Windows XP and higher (64-bit) C:\Program files (x 86) \common files\adobe\AAMUpdaterInventory\1.0\AdobeUpdaterAdminPrefs.dat

    Note: This will also prevent administrators to check updates and installation of updates through this verification of updates. This situation is easily dealt with by simply renaming the file AdobeUpdaterAdminPrefs.dat, run the update checking and installation with Adobe Application Manager, and then restore the file to its original name.

  • Apple and Adobe fixed the problem of ink and slides with iPad 2 Air again! It's summer is really long!

    I wonder what the updates on the issue of ink and slides with iPad 2 Air, has been set yet! It's summer is really long!

    No - Sorry to say. But it loks like a case of death for me. We use all this money on paper and pens next time I will wait 1-2 years before trying to summarize fancy gadgets / hardware from Apple / Adobe - I'll stick to Wacom for sure.

  • connection problems router WRT310N and wrt54gs * with DSL

    Until I can return to my apartment and after IPconfig etc. returns I wanted to see if anyone has had the following problem.

    I had a home wireless network set up with a wrt54gs v 5... I think it was BOM.

    A few days ago I tried to get the network key for the new smartphone and my roommate kind of stupidly locked myself and disconnected my phone then my Office Wireless adapted. passing through the standard power recycles and resets all him remains disconnected in the apartment as well.

    I have DSL through verizon, a toshiba satellite a135 with vista installed, all updates of drivers, and a westell 6100 dsl modem provided by my phone company.

    highlights include:

    (1) two nights now troubleshooting and browsing the forum. I have already exhausted simple corrections of linksys on his questions and help section.

    (2) new router, I wanted anyway a new and estimated that he was the problem. So I bought a wrt310N, hung, and he now obtained, there no longer updated set of firmware

    (3) internet connection is fine when I connect to my laptop directly to a dsl modem.

    router 4) implements the home network wireless very well, but with no internet connectivity

    (5) computer wired to the modem connects to the internet. wired computer for router modem does not connect to the internet. with two routers. If it connects not wired and wireless won't be better.

    I'm getting a little tired and tired, not to mention, I didn't my XBOX live fix to remove the stress of working in a military office all day lol

    everything seems to work until the router tries to connect to my dsl provider, at least as far as I can tell.

    and I'll be on the phone/forums with my ISP as well to make sure that I am not he mess up simply forgetting to fill in an optional field with info mandatory lol.

    so... help?

    still, when I go home for lunch I'll post information and specifications of real hardware if someone a little more savvy I know what to ask.

    Any ideas on where I'm wrong now?

    Fixed issue...

    in the end, it's a problem between the ISP's modem and the router that they helped me understand.

    My DSL service had changed their service, so TRP was no longer how they did the connections. Automatic DHCP was the current form. Following configurations of router DSL online provided inaccurate information. I didn't have the time to check with the ISP until yesterday afternoon when I was finally able to make a phone call and clarify things.

    We put the modem into bridge mode, checked some settings on the router, and then everything is back up now.

  • Problems to recognize and sync with the smartphone Blackberry Q10 with PC

    Thanks in advance to all.

    My BB Q10 was not reproduce my calendar and added duplicates to my contact list whenever I have synced.  So, I uninstalled their software thinking Backberry link I re-install and solve the problem.  Now my PC does not recognize the phone (I tried the 'activate fix mass storage) and BB tech support says that I need to install a "div" ("you must contact Windows to request assistance on their part on the .msi file that your computer needs.") in order to download and re - load in the BB Link software.
    I know that the problem comes from my PC because I connected the phone to my wife and it was immediately recognized, and you are prompted to install the BlackBerry link.
    I know I'm a fossil with Windows 7 and Blackberry, but any help would be appreciated. Thank you

    Like so many people, I had a nightmare trying to connect my Q10 and before that a Z10 for LINK.  After reading a lot of posts become completely disillusioned, until I found a post on the opening of the control panel/Device Manager and see if BB Q10 was listed and had a yellow triangle next to it and then try to reinstall the drivers.

    So I plugged my BB to the computer with a USB cable

    Open panel / but Device Manager there is no device listed outside the "RIM Mass Storage Device."

    What made me think...

    With the always-connected BB, on BB, I opened the settings / storage access and disabled USB mass storage.

    On the control panel / Device Manager, immediately "RIM Mass Storage Device" icon in the taskbar, a window and disappeared popped up saying "search drivers."

    This has changed then automatically to "Install drivers" and "Finish."

    In Control Panel / Device Manager a new device popped up in the area of 'No' called 'peripheral network RIM.

    Then I opened the link and it is immediately connected to my BB Q10...

    Then I went there immediately disconnect and link back to the Q10 spilled the USB Mass Storage 'OFF '.

    Certainly, there is a bug here...

    I lost several hours tinkering with this whole process, and it's a nightmare of flashing.  While this may not work for everyone, I hope this works for some of you...

  • Problem of color and Lag with Flash.

    Hi, I have this very annoying problem with flash. The photos below show what I mean by the problem of the color and the video shows the offset. I have impression projected both videos to show you how to receive. I've included links for you to see the video.
    youtube.jpg

    Without even looking at the video, I guess you can see that there is something wrong already, to compare watch them the vid.

    Link to the video (Yotube)

    youtube2.jpg

    This is the worst that a video is already well that sometimes I get a green screen instead of a video

    Link to the video (Yotube)

    The problem of Lag, I sometimes have with videos (I have recorded my screen):

    Link to the video (Yotube)

    PLEASE NOTE:

    • I tried to reinstall or uninstall the flash player (I used adobe flash uninstaller)
    • I also experienced a two errors while watching a video. the video card (Nvidia GeForce 8500 GT) gave my windows 7 (32 bit) an error and the screen flashed but I then recovered but the video does not.
    • I think there could be a problem with my monitor recent update and also the use of two screens. Maybe the graphics card just cannot be considered.
    • I checked the different browsers and the same thing happening even IE9 HTML5!

    Try turning off hardware acceleration.

  • Problem of sum and group with MSSQL


    I'm a quiet complex query after users entry form. The result looks something like this (data simplified, useless and truncated fields)

    cat_id | producttext
    -------------------------------------
    1002 | Parma ham
    1013. Bordeaux
    5006 | Parma ham
    1005. Something
    1002 | Another product of Kat 1002

    As you can see the first and last record have the same cat_id.

    What I want ultimately is to know the percentages of products in the same range (1001-2000, 2001-3000...)
    and the percentage of products in the same chat (such as 1002)

    I do this simply by a subquery on every Beach, see attached code (query1).
    The problem is I don't need only the cat_id but is dependent on the language name.

    I can get it with the query as (see query2) but, it used to function if the FROM is another query. It only works if I choose a real table.

    All advice what to do different?

    What I really want ultimately is a table like this:

    2 1002 Fleisch
    1 1005 Beilagen, pasta, Reis, Konserven
    1 1013 great






    This have I done.
    I do the join in the 'base' didi - query.

    Thank you

  • Problems in CS3 and AS3 with embedded fonts

    Hello. I recently downloaded the trial version of CS3 to test. I am an experience AS2 developer, and have 10 years of C, C++, c#, Java, PHP... programming experience on MAJOR projects starting before flash.

    I tried to use a font embedded in AS3 with a dynamically created textfield. I tried all the examples of ActionScript 3.0 Cookbook from O'Reilly. They suggest using the [Embed] metadata tag, but quite honestly it doesn't do anything in CS3. I got the size selected report option, and it clearly shows by the size of file that the police is not present in the SWF file.

    Then I tried to do like I did in Flash 8. There still no luck. My TextField exists, but it is simple no rendered police... Here is my piece of code.

    In my library, I have a symbol called arialBold. In the connection settings, I have "Export for ActionScript" checked and "Export in first frame" checked. The class is "arialBold" but I wonder if it's true? and the Base class is 'flash.text.Font.

    I tried all the variations I could think. I have to do something wrong. You can find my file here:

    http://www.newcommerce.ca/AS3/fonttest.fla

    Thanks for your help! You can solve this problem, I would be very happy!



    Well, that's the way it was supposed to work, but I think what integrate coding Flex 2 and does not work with actionscript 3.0.

    Here's something that works: embed a font as you did for a.s. 2 and give it a class name (say _comicSansReg). You can then use:

  • I have problems of configuration and access a new SDE-120 security camera system.

    original title: networking question

    OK, we are in BFE and our best internet connection is a 3G a SCH-LC11 hotspot which my computer too.  All other computers use my computer as the internet gateway.  We recently hooked to an SDE-120 security camera system which has a DDNS server to connect remotely via the web.  This does not work I can access the local network using the IP system, but remote can't do what I need to change in my computer to enable this through.

    Hi J DUB_962,

    I recommend you contact the manufacturer of your camera, because they will be in a better position to set up the security on your computer camera.

    Hope the helps of information.

  • Documentation for the configuration and the deployment of SSO in WCI 10 g R3

    I searched the Forum and the oracle documentation, but found no specific documentation on configuring and deploying single-sign - on (SSO) in WCI 10 g R3. I found the documentation for ALUI 6.1 but not for 10g R3. Grateful if someone can provide the same.

    Thank you

    In addition to Ms. WIA, we support the integration of Netegrity Siteminder and Oblix (now Oracle Identity management solutions) against WCI. 10GR 3 administration guide includes a section on "Single Sign-On deployment" and "Common Questions SSO" that might be a good starting point:
    http://download.Oracle.com/docs/CD/E13158_01/AluI/WCI/docs103/map_WCI_adminguide_10-3/

    However, it seems there is no information in the deployment (a mistake I think), to verify the portal 6.1 admin guide here:
    http://download.Oracle.com/docs/CD/E13174_01/AluI/Ali/docs61/Admin/SSO.html

    Down from the link above, you will see information on the use of BasicSSO and CustomSSO to connect to other third-party SSO providers not supported. And I think that this KB below may still be relavent although old.

    Develop a custom SSO objects to integrate third-party SSO servers with the portal
    ArticleID 778417.1

  • published RT cRIO-9030 with network-a project of shared variables cannot communicate with host VI when compiled and deployed as executable startup.

    I have a project including a VI RT running on a cRIO-9030 and a host VI running on a desktop computer.  The two programs communicate via shared variables that are hosted on the cRIO.  As shows, when I run the screw of the project, everything works as expected.  When I compile the RT VI in a start-up executable can deploy for the cRIO, as well as the libraries of shared variables (the record of support in the build specification-oriented), I am unable to connect to the executable running in real time.

    I have 'Disable Autodeploy Variables' checked on the cRIO target, if I no longer get the prompt to stop the currently running application to deploy the variables.  The host VI opens and appears to run, but has no connection with shared variables (data does not update).  Compilation of the host VI as an executable file and it works outside the project result in the same behavior.

    I read some relevant posts / knowledge base articles related to this problem, but still can't seem to find a way around it.  I note a number of articles on the series in double bond of variables, but this is in contradiction with my possible behavior for this system: I finally have a number of cRIO controllers identical all runnning the same executable RT and want to be able to have a single host VI which allows the user to select from a list of available controllers (using the screw system configuration) and extract the host name of the controller selected, that would be later used for programmatic addressing of the variables on the host of part VI.

    In any case, I want to start with the simple fact of being able to get that first controller running without an open connection to the RT VI project.  With the deployed executable start, I checked via programmed behavior of LED application of the RT and FPGA are running on the cRIO.  The problem, I think, has to do with shared variables, but I'm not sure where to go from here.  I want to connect to RT executable running from the VI to the host (in project) to verify that the compiled executable of RT works as expected and then the subsequently compile host VI in an executable that can be run from any desktop on the local subnet.

    Thoughts?

    It seems that the error has now been corrected.  There were three things, I changed: the file startup.aliases in the startup on the target directory (Home: / lvuser/natinst/bin) put in 'localhost' as an alias for the controller.  I changed it to the IP address of the controller.  Then, I got some features of IO files in my application RT relative paths using the path obtained by the 'current path VI' VI.  As this path changes according to the location / delivery system, I had to create a VI that has used the Application property: type with a case properly structure band / build railroads desired regardless of the runtime system data files.  This may have broke my RT request.  Finally, I got a property node in one of my RT SubVIs, who attempted to change an indicator in the Subvi, which is not taken care of in an RT compiled executable.  I can't do this for debugging purposes somewhere along the way, but in any case, I removed it, and after a recompilation and the deployment of the executable of RT, everything seems to work as expected today.  The host VI on the desktop can connect to the application of the RT project, and when it is compiled into an executable file, which also works.

  • My laptop is one of the 4 home cannot connect to the internet, it's Vista and it has connected w/Ethernet no problem, I called Xfinity tech, that says, is the problem of configuration! Can you help me?

    Acer laptop, Vista is, she can connect wirelessly with my friend modem but my house, she can't, I use the service of Comcast, they checked the modem is fine, they think that the problem of configuration! I'm not computer too, thank you!

    Ryan (Shih Chi)

    Hello

    How do you try to connect the computer to the House? Wired
    or wireless?
    Try the methods provided and see if it helps to solve the problem.
    Method 1:
    Check out the link and follow the troubleshooting steps in the article.
    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
     
    Method 2:
    If you try to connect to t Wireless net work then refer to this link and follow the steps.
    Connect to a network with Windows Vista wireless
    http://TechNet.Microsoft.com/en-us/library/bb878035.aspx
     
    Method 3:
    Reset TCP/IP on your computer and check. Check out the link and follow the steps.
    How to reset the Protocol Internet (TCP/IP)
    http://support.Microsoft.com/kb/299357
     
    Method 4:
    You can also visit this link and follow the steps.

    Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
    http://support.Microsoft.com/kb/928233/en-us
     
    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows
  • Options has dissappeared form my top bar (the classic theme configuration) and with it, spell checker and al.

    Options has dissappeared since my top bar (the classic theme configuration) and with it, spell checker and al., search help find nothing useful, as usual. Am I the only one wondering how to access functions to be included under Options?

    You have solved my problem, and I wanted to thank you again for your help and your patience.

  • Have problems and questions with Time Capsule were addressed in any significant way. Reluctant to buy according to your comments.

    Have problems and questions with Time Capsule was dealt with in a meaningful way? Reluctant to buy according to your comments.

    Apple did not have any material changes to the time Capsule to nearly 3 years. The only change that has occurred in the last 18 months or so is a firmware update to address security issues.

Maybe you are looking for