VSAN membership down on the CF mapped uplink port

Hello

Since I upgrade Cisco UCS Manager, all frame and fabric of interconnections of version 2.2 (1), I have a few minor flaws.

I configure ports 31 and 32 as FC uplink ports and mapped each port to a vsan:

Port 31 = VSAN 'blue '.

32 port = "red" VSAN

(I know, it is not common to map two different VSAN to the same fabric, but I have to)

Since the update, I get minor flaws:

31--> FCoE or FC uplink port is broken on 'red' VSAN / membership-down

32--> FCoE or FC uplink port is broken on 'blue' VSAN / membership-down

I have no channels of port FC or FC enabled link mode. Interconnection of fabric is EHM.

Even in other tissues.

Can anyone help me or is it the same cosmetic problem as stated in the quote?

FCoE Uplink vsan membership fault for any vsan not configured upstream Symptom:

Fabric Vsan Membership Down fault message on FCoE uplink ports

Severity: Major

Code: F1083

Name: Fabric Vsan Membership Down

Conditions:

Observed with UCSM 2.1 and when FCoE uplink port is configured on the Fabric Interconnect

Workaround:

None.Error message is cosmetic.

Thanks in advance

/ Danny

Hello Danny,

Yes, it is a cosmetic issue in UCSM 2.2.1

the question is followed by

https://Tools.Cisco.com/bugsearch/bug/ CSCum89468

The one that you cited ( CSCud81857 ) is specific to the rising FI FCoE in version 2.1 of UCSM.

HTH

Padma

Tags: Cisco DataCenter

Similar Questions

  • stop the ethernet uplink port will cause the port of the unit down

    Dear all,

    I want to make sure that this kind of network traffic will communicate internal fi.

    I've disabled the uplink port and found the path of material has also declined.

    Port of the device must road toward uplink port and then back to UCS server?

    Thank you for the clarification.

    Best regards

    Dennis Dai

    Expected behavior.  By default, if there is no uplinks online & fwd, then all links South (Server binds and the ports of the device) will be used also to the bottom.

    See the explanation of Abi here for more information how to change this behavior.

    https://supportforums.Cisco.com/thread/2187144?TSTART=0

    In short, we must change policy control of the network of the way of the material in the Hardware tab.

    Kind regards

    Robert

  • Plugged in the new maps the host network but show as 'down' in vCenter

    Hello

    I hope someone can help me.  I'm under ESXi 5.1 on 3 different servers.  They each have 4 network cards, but for some reason when our IT installed in the data center, they decided to connect just 2 network cards in each server in our dedicated physical switch.  They presented themselves as vmnic0 and vmnic1 in vCenter and can be used.

    I asked them to connect 2 additional network cards they have done today.  These are connected to the same physical switch. They appear as vmnic2 and vmnic3 in vCenter.  They are always displayed as "Down" for the speed and 'None' for the observed range of IP addresses.

    I tried to restart a host without change.  I connected to one of the hosts through Putty to try to get him to help

    # esxcli network nic place vmnicX - n

    But that does not change. No error is given, but when I list the network cards they always see down and still there in vCenter.

    Any ideas?

    Thank you

    Mike

    Hello

    your team must inspect the physical switch configuration. Maybe the ports are disabled or a VLAN configured wrong, etc..

    Tim

  • 4 FC by FI uplink ports. But what a single port to send the addresses of WWPN vHBA?

    I have four portis configures as uplink FC by FI and FI woking in end host mode.

    I have 24 blades using two vHBA. vHBA0 and vHBA1.

    24 address WWPN are saved on the uplink of SAN of only 1 FC uplink.

    Same case in the other Brocade.

    That is something we don't want.

    All FC uplink ports must be used.

    We have borcade. Advised not to use the port channel.

    I can manually create groups of pin code and balance the load. But do create a lot of model vHBA and tedious work.

    Other autour work?

    Help, please.

    (1) you can only use Port FC channels connecting to Cisco MDS and Nexus or for FC traffic.

    (2) on each FI, run the following command:

    (nxos) # see the npv flogi-table

    You should see the WWPN by connecting to the FIs, or you have problems downstream with your configs vHBA.

    Make sure that vHBA0 is mapped to FI - A and vHBA1 is mapped to FI - B and the proper vSAN is assigned to the vHBAs. Also ensure that the FC connections are not crossed the FIS for the brocades.

    model vHBA allows very simple, consistent deployments.

  • Temporarily disable the tempo map

    I have a few events of tempo entry on the list window in different parts of the song tempo. The song is very fast, so I would save a problematic passage, slowing down to this point in the song, but not change or remove information from pace. Is there a way to temporarily disable the tempo map (and slow down the tempo required) in order to register my passage?

    Thank you

    You want to use Varispeed. -You must activate it in the command bar and it allows you to slow down or speed up the project (maintaining pitch) while maintaining some tempo events you have.

    enable it in the menu bar. Turn on... and you can set as a percentage faster/slower or bpm

  • Half of the blades fell when creating a new channel of uplink port?

    I have a pair of 6248UP fiber interconnection (A and B) with blade servers connected. The switch upstream is Nexus7k. Fabric A and B each right has now a channel of uplink port to the Nexus switch upstream. I add a new Nexus switch to connect to the interconnection of fiber. The plan is to have uplink some VIRTUAL networks for Nexus one pass and uplink some VIRTUAL to the second Nexus switch networks.

    After that I configured the new Nexus switch with a channel port (only allowing some VIRTUAL networks) and corresponding port created on fabric channel A and B, new ports-channels have increased. However, half of the blade servers were down after that. What could be the reasons for this problem? Is it because half of the blades have been pinned dynamically on the new channel port, but the new port-channel side Nexus allow only some VIRTUAL networks?

    Is there a way to configure the Channel ports on fiber to interconnect with only the trunk through some VIRTUAL networks? for traffic from the server would not be sent to the port-channel where VLAN server is not allowed?

    Thank you

    In general, all NICs for/vhba of a fabric are declining, if all uplinks of this fabric are declining.

    It's not clear to me, what you're trying to achieve?

    If you create a global VLAN (for the two fabrics), this vlan is automatically inserted in all dependent North trunk links, unless you configure a leaking installation

    (http://www.cisco.com/en/US/solutions/collateral/ns340/ns517/ns224/ns944/white_paper_c11-692008.html)

    Create a new vlan on UCS requires of course also this vlan is created on the switch connection and vpc by default allows all the VLANS. Could it be, that the vlan not appeared on the switch and was therefore not upward on the trunk?

  • Windows 7 computer to connect to Airport Extreme with an external USB drive attached. Flash drive appears for the network map but not the hard drive.

    original title: drive hard extreme airport

    Using Windows 7 and the Airport Extreme.  The Airport Extreme has a USB port that can be used to mount an external hard drive which is accessible via the wireless connection.  Only thing is, I can't get a 2 GB flash drive will appear for mapping.  When I use the other hard drives, they never show upward for mapping.  They show that it is connected to the Airport Extreme, but are not seen by my PC.   The internet has a rumor according to which hard drives will show up only on a PC if they are to FAT32... which would work without another formatted hard drive.  What do you know about my problems of compatibility with hard drives?

    Hello

    Check updates firmware for the Airport Extreme.

    Airport Extreme
    http://www.Apple.com/WiFi/

    Airport - Support
    http://www.Apple.com/support/airport/

    ---------------------

    Although I think that the question is really the Airport Extreme also updates Windows 7 WiFi.
    Check with the system manufacturer and the real device manufacturer updates the driver.

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
    version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
    Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using the methods
    below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
    found)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
    (Those become your fonts of rescue system manufacturer).

    Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
    7 love the updated drivers.

    I hope this helps.

  • My wifi speed went down after the installation of windows 8

    After download of windows 8 on my laptop wifi speed went from 25 Mbit/s to 0.2 - 0.5 Mbps, on my other laptop speed is always 25 Mbps, I get two different speeds with two different laptops in the same room, my laptop is a Hp Envy 6 1048ca

    Hi AshifChowdhury


    I'm glad to know that you have published the application in the Windows 8 Forums.

    According to your description, you have a problem with the Wi - Fi is slow after installing Windows 8.

    I understand that it must be frustrating, but don't worry, we are here to help solve your problem and guide you in the right direction.

    We begin with a question.

    Did you do changes on the computer before the show?

    Now let us perform some troubleshooting. All steps are carried out systematically and in order.

    Method 1 - I wish that you run the network adapter troubleshooter.

    First of all, try to use the network adapter troubleshooting utility to automatically find and fix some problems. This troubleshooting will be disable and re-enable the adapter and try a few other common repairs:

    Open the network adapter troubleshooting utility by hitting swipe in the edge right of the screen, tap Find (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering the troubleshooting in the search box, touching or clicking on settings and then by typing or clicking on the resolution of the problems. Press or click Network and Internet and then press or click on the network map.
    Make sure that there is no interference between the router and the computer.
    Sometimes interference like cordless phones, thick walls, and other wireless devices can affect the speed of Wi - Fi.
     
    Hope the above information helps.

    Do get back to us and let us know the State of the question in the case where you need further help or your next post. We, at tender Microsoft to excellence.
  • Impossible to make the transition smoothly down to the area of 700-800 px

    Have div jump to about 700 px area + on the transition down. Code changes now becomes difficult to keep order, so ask before getting too deep into the quagmire.

    Test site: http://02ca0d2.netsolhost.com/action_appliance_02/index.html

    Thanks for any help...

    I assume you mean the Google map.

    In your layout.css under the shelf Media Query, change this:

    {#column_rt}

    Clear: none;

    float: right;

    left margin: 0%;

    Width: 23.7569%;

    display: block;

    }

    to do this:

    {#column_rt}

    Clear: left;

    left margin: 0%;

    Width: 100%;

    display: block;

    }

    Nancy O.

  • Combining the image maps and dropdowns

    In Dreamweaver 5.5, I want to create a dropdomn from a graph into slices. There is a toolkit called the Inspector of tags that contains 3 tabs. The behavior of the tab with the + sign brings up a menu, where I'd be able select the pop-up Menu display - but it isn't here!
    Where can I find a toll to create drop-down lists of image maps?

    Image maps do not drop-down menus.  You would be better served with a list of CSS style menu.

    Example 1 (same style):

    http://ALT-Web.com/demos/CSS-Horiz-menu-2.shtml

    Example 2 (multicolor)

    http://ALT-Web.com/demos/CSS-multi-colored-drop-menu.shtml


    Nancy O.

  • My iPhone 7 won't let me push down on the icons to move them. No matter how hard or how long I push the icon itself just happens.

    MY iPhone 7 won't let me push down on the icons to move them. When I push it down and that you hold, no matter how many seconds the icon itself appears just. Help!

    Push slightly, not difficult.

  • Please correct the function map for photo albums in Photos

    Dear Apple people - difficulty please please the function map for photos in photo books. I loved the features of cards in iPhoto, so why go to all the trouble of screwing up so royally in Photos v1.5? A few examples at random: instead of being able to type a place name and have the program to find the place for you, must now click on the + sign, then a red dot appears in a place at random (as in the middle of the Tasman Sea), and we can then move the red dot at the location you want (after first checking a different map to determine the correct location of the place you mean - Port Douglas Australia for example). A colossal waste of time. Or how about this: it takes an hour to put the plan in place so, then closes the program. At the next opening it, found the red dots have all migrated to odd locations around the map, bearing no resemblance to where they were placed at the origin. Once again, a huge waste of time. And it's only two of many examples.

    Please, I beg you, bring back the features of cards in iPhoto!

    1 - Apple isn't here - it is strictly a user to user forum

    2 - person here can fix anything

    3. you can certainly type the names of places with pictures - using Photos (a great place to get help with Photos)

    View and add information about the photos

    To view or change information for the photos, you select one or more photos, and then open the information window.

    • Open the Info window: Double-click a photo to view it, and then click the Info button in the toolbar or press on command I.
    • Add or edit information:
    • Change the following.
      • Title: Enter a name in the title field.
      • Description: In the Description field, type a caption.
      • Favorite: Click the Favorites button to mark the photo as a favorite. Click the button again to deselect.
      • Keywords: Enter the keywords in the keywords field. When you type, Photos suggest keywords that you have used before. Press enter when you have finished a keyword. To remove a keyword, select it and press DELETE.
      • Faces: Click on and type a name to identify a face. Click on several times, and then drag the identifier of the face different faces to identify many faces in a photo.
      • Location: Enter a location in the location field. When you type, Photos suggest places you can choose. To change a location, you can search a different location or change the location by dragging a PIN on the map. To remove location information, delete it or choose Image > location, then choose Remove location or back to the original location. You cannot assign a location if your computer is not connected to the Internet

    4 - If you want to discuss the Photos it is best to post in the forum Photos rather than the abandoned iPhoto product forum - I would ask that this be moved

    5 - If you mean apple use the correct form - http://www.apple.com/feedback/photos.html

    LN

  • What is the banner that comes down from the top of good windows support for?

    Whenever I scroll down to read a page on the Apple forums, a banner comes down from the top of the window. The banner has the question on what started the thread.

    I don't see any use it serves unless you have a VERY short attention span. It's boring and covers a text (reduces the size of the window), so it's worse then 'not useful' - it is harmful.

    Yes, I see the 'X' which I can click to close the banner - but is it possible that I can turn off this feature altogether?

    Turn it off, no.. Guests sometimes read the posts here and see if all goes well your comment.

    Alternatively, you can provide direct feedback here:

    https://www.Apple.com/support/feedback/?ref=contact-us

    Barry

  • I dropped my iPhone face down on the concrete

    DDo, I have need of a new phone or can it be repaired? I dropped my iPhone 5, OS7.1.2, face-down on the concrete and now it does not illuminate screen is gray and cannot see all of the icons, as applications.

    Have you ever tried to force the reboot by holding down the button sleep and home for 10 seconds, until the return of the Apple logo again? You won't lose data.

    Next step after that would be to connect in recovery mode, as explained in this article:

    If your iPhone, iPad or iPod touch won't turn on - Apple Support

    If this does not work, you will get the phone repaired.

    Launch a service request

    Find an Apple authorized service provider

    Make an appointment at the Apple Store

  • Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical de

    Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

    Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

    Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

    Apple has not renewed the contract with Google to access Google servers.

    If the old version of iPhoto, which are still using Google's servers for the cards and places are either crashing or hanging.  Places are only work in iPhoto 9.5.1 or newer, who use places of Apple servers.

    There is more support for iPhoto from Apple.  You must update iPhoto 9.5.1 with the Mavericks. It would work well, only it is no longer buying this update to Apple.

    Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

    It is very likely.  If iPhoto work very well when you are offline, then your problems will be caused by the connection failed to Googles servers.

    See this: Bug: iPhoto 9.4 crashing when viewing the scene

Maybe you are looking for