Similar Questions

• vShield manager cannot see some virtual guests

  Recently, we have built a new vSphere 5.1 environment and installing vShield endpoint Manager 5.1.2 - 943471.

  Installed the endpoint on the hosts and the Kapersky Security Appliances to each host. I started to migrate virtual environment 4.1 existing to the new environment.

  
  

  Improved vmware tools in the virtual machine as part of the process and removed the existing antivirus checker. The endpoint vSheild Manager reports that the thin driver is installed on all but a few virtual methods that are not reported by the slim agent vShield as Manager. They are listed in the left column, but when you look at the endpoint events that are not like the others? Before you begin to migrate all about I need to be certain that all virtual methods at least are protected.

  
  

  I checked each guest to ensure that the driver has been installed and running using msinfo32 and are looking for the driver vfilefilter it checked good also I can confirm that virtual methods are running supported SCSI adapters. Something else to check?

  Just a update for it tried a few other servers and they they also have same problem. Have uninstalled and reinstalled vmware tools with the vshield driver installed, but still do not see the virtual server.

  Kind regards

  Jason.

  Response of the virtual, which is where are not not in Manager of vShield or on version 4 of a previous update ESX3.5 material. Once we upgraded the virtual DJ we can now seem to them

• Manager Windows 8.1 and the HP recovery disk manager cannot remove the recovery partition

  I have the following computer: HP ENVY h8 desktop PC - 1437c.  I used the HP Recovery application to do a recovery on a flash drive disk. When you have finished this operation it was not an option to remove the recovery partition (drive D on my computer. I tried to reopen the HP Recovery Manager and try to remove it like that, but to remove it is greyed out. I also tried to delete it using the 8.1 windows Disk Manager, but there is no way to do there either. If I right click on the recovery Partition, I get only an option 'help '. How can I get rid of this partition and recover lost space using it now on my hard drive. Windows and HP did not want to provide more records with their computers, but they do not have a problem of screwing of MY hard drive that I bought and paid for. I should start to charge rent for the space.

  I just used the software and created another partition as drive D using all unallocated space. I can delete probably once again, or maybe I'll just use it as a storage device for my files instead of recovering files sofetware... Thanks for the help

• I have managed to remove the LR5 from my computer and cannot find a way to recharge.  I have set up (24 issues)

  Hello

  I managed to remove the LR5 from my computer, im not sure how I can recharge it.  I have the code number 24.  Hopethat someone can point me in the right direction.  Thanks Richard

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• Cannot remove virtualwire, phantom vm still attached to it

  Hello

  someone removed a bunch of demo of our environment which had a few still active nsx virtualwires.

  How can we now remove these virtualwires?

  Manager of the NSX, they seem to be always active, but we cannot remove them as the Manager of the NSX still think it is a virtual machine connected to this virtualwire.

  This virtual machine has already been VC, so we can't unplug the virtualwire .

  How can remove us this machine virtual of this virtualwire so we can remove and clean the database of the NSX.

  Is there a way to sink the two together, as it is now the inconsistency between the Manager of VC and NSX.

  Kind regards

  John

  Hmm, vm ghost don't exist like. Looks like the NSX Manager made a new analysis because ghost VM have now disappeared.

  VCenter server:

  "Plugged - last update successful inventory was Monday, December 15, 2014 20:53:34 GMT"

• How to separate vShield Manager with vCenter

  People, we have installed vShield manager. Before you configure devices such as EDGE or APP, we decided to go for some change major grace to which we would like to uninstall the vShield Manager. I just wanted to know how we can separate vShield Manager with vCenter or simply if I delete device it will be deleted?

  Please help.

  Thank you and best regards.

  Hari.

  No,

  VShield manager is a device managed by plug-in.

  If you previously uninstall component vshield vshield link manager, you can remove the device and then remove the plug in. (like other component like Vmware Data recovery,...)

  Kind regards

  Julien.

• vShield Manager investment - clarification of required documentation

  I'm trying to deploy vShield Manager in our test environment and dev (before we implement production).

  I have read the documentation "vShield Installation and Upgrade Guide - vShield Manager 5.1". On page 20, the following statement is made:

  NOTE do not place the management interface of the vShield Manager in the same port as well as the Service Console VMkernel group.

  Question:

  Is it OK for the vShield Manager to be in the same subnet and VLAN as the Service Console and VMkernel, with the help of a group of dedicated ports?

  For example, I create another port that has the same VLAN as the VMkernel and Service and the vShield Manager Console uses this group?

  Let me explain with an example.

  On page 19, the following statement is made:

  With vShield 5.0 and later, you can install the vShield Manager in a different vCenter as the vShield Manager is going to be that interacts with. A single vShield Manager offers a server environment unique vCenter.

  vCenter1

  • It's the vCenter the vShield Manager will be deployed to
    
  • It uses the portgroup 'Network management' with 18 VLAN for the Service Console and VMkernel
    
  • It's on the 192.168.10.0/24 subnet
    

  vShield Manager

  • This vShield Manager runs under vCenter 1
    
  • It uses the portgroup 'Management network for vShield Manager ONLY' with 18 VLAN
    
  • This is where the management of the vShield Manager interface will run
    
  • It's on the 192.168.10.0/24 subnet
    

  vCenter2

  • It's the vCenter the vShield Manager will be Interoperation with
    
  • It is a virtual machine running under vCenter1
    
  • It's on the 192.168.10.0/24 subnet
    
  • It uses the portgroup 'Network management' with 18 VLAN for VM traffic
    

  So my question once again:

  Is it OK for the vShield Manager to be in the same subnet and VLAN as the Service Console and VMkernel, with the help of a group of dedicated ports?

  Yes, it's good to have the Manager on the same VLAN as the vmkernel interfaces.    According to your description below you will be fine and actually following practice correctly.

  Do know not why the docs say not to put it in the same portgroup as the vmkernel or console service that those are special exchanges and you can't put a virtual machine (the Director) in a GRPE ports console vmkernel or service.   I'll have our people docs on that paycheck.

• missing vDISK, it cannot remove on the settings of computer virtual...

  a vDisk (not the C drive) is missing, cannot remove... on virtual computer settings and can ' start, getting the below error message:

  

  How can I remove it and leave the start the virtual machine.

  I thank you,

  VMX has only a reference on virtual disk 1... There is no reference to VD 2 and 3.

  You can unsubscribe from the virtual machine--> restart services management--> re-registration the virtual machine and see if it works.

  Alternatively, you may create a new vmx:

  --> Unregister the virtual machine--> create new VM--> select "Use existing virtual disk" instead of creating the new disc--> point to virtual disk 1--> and follow the instructions in the wizard.

• Cannot remove data VMDK file store

  Hello

  I tried to solve a problem where we can't delete the 2 files hard below (since a ls - la in ssh)

  -rw - 1 root root 262144 Jul 31 13:55 2010 - 10 a-000001 - delta.vmdk
  -rw - 1 root root 133711265792 Jul 31 13:55 2010-10A - s001.vmdk

  I tried a rm without success:

  The virtual machine is more listed in VCentre (I tried to delete data store manager), I believe that files can be locked for a reason, but I don't know enough to determine whether it is safe to kill the s pid which seem to use the folder:

  [MS root@ESX1 server demo disk] # lsof | grep 'Disc of demo of MS Server'
  disc of demo server lsof 1317 root cwd DIR 0,18 560/vmfs/volumes/4fb703b6-bb64840f-e817-02215eccbdbb/MS 21592
  disc of demo server grep 1318 root cwd DIR 0,18 560/vmfs/volumes/4fb703b6-bb64840f-e817-02215eccbdbb/MS 21592
  disc of demo server lsof 1319 root cwd DIR 0,18 560/vmfs/volumes/4fb703b6-bb64840f-e817-02215eccbdbb/MS 21592
  bash 16678 disc of demo server root cwd DIR 0,18 560/vmfs/volumes/4fb703b6-bb64840f-e817-02215eccbdbb/MS 21592
  

  No results appear if I lsof files themselves.

  I can kill these processes? I have not the option to restart the server.

  I've also seen mention of restart /sbin/servicesservices. SH , but I'm hesitant because I don't know what this will do - how does affect other virtual machines running?

  I'm running ESX 4.0.0 208167 (according to VCentre) and I watched as a result of discussions among others:

  http://communities.VMware.com/message/2037529

  http://communities.VMware.com/thread/126894

  http://communities.VMware.com/thread/246141

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 10051

  
  Any help is greatly appreciated

  
  [MS root@ESX1 server demo disk] # rm - rf 2010-10A - 000001 - delta.vmdk
  RM: cannot remove "2010-10A - 000001 - delta.vmdk': device or resource busy"
  

  I've also seen mention of restart /sbin/servicesservices. SH , but I'm hesitant because I don't know what this will do - how does affect other virtual machines running?

  You can restart the services... There will be no impact to the VMS running... also try to restart VMware vCenter services (services.msc)

  If the above does not work, then restart the host seems to be the fastest and the most secure option.

• Error adding vShield Manager in vCD

  I have tried a CEP of vCD and vShield using the. OVA on VMware.com
  I see error adding vShield Manager vCloud Director.
  I checked the vShield Manager, it works well, can connect display settings on the Web page.
  I tried to telnet vShiled Manager of port 442 vCD virtual machine, and that failed.
  
  What should I do next?

  Does anyone have any suggestions?

  This may seem like a stupid answer, but it launched my butt when I started using vShield edge with vCloud.

  Connect to the device vShield edge with a web browser:

  https://vshieldedgedevice - one of the first options is to connect the edghe to a vcenter, the account used to connect vshield edge to vcenter - this is a good one to use because it configures all rights that edge will need on this account... (don't forget to login/pw)

  In vCloud use this login/pw.

  Now, here's what made me, the password cannot contain a few special tank - I forgot the list but I don't know ":" me before.

  Hope this helps

• Cannot remove the program or update or open pages on the internet acrobat reader ix 11.0.0.07

  Cannot remove the program or update or open pages on the internet acrobat reader ix 11.0.0.07

  Cannot delete the program or update Acrobat or open pages on the internet, acrobat reader ix 11.0.0.07 size is 182,00 MB 7 says really used so I don't know what is missing other then he says that he cannot find or open patch package my system is windows xp pro

  It will not remove add & remove programs, that it says it cannot find or open the hotfix package.

  It will not allow updates to repair or replace day & said updater already installed & give up its new facility.

  It opens not all pages on the website & it says that it is running in other places, but it does not run & don't see any action in the Task Manager processes.

  I reported it to adobe bugs but no response with a help real other so they want to sell me more products & upgrade free trial version.

  I downloaded adobe cleaner & install helper, but none was of no help.

  Why would I want to buy what is the user on an automated test dummy & has no direct support.

  It is a * way to upsell by extaution try to free30 day & then pays fees to remove or to go around asking users cahase.

  I'm looking to join a frat or disucushion group, I want to just this program to work or be abale to easly remove it from my computer.

  [email protected]

• Cannot remove the Image event listener

  I'm clearly missing something and would be grateful for the help.  I'm trying to run an event handler when a full picture of loading, then remove the Manager so that it does not once again the image needs to be reloaded later.

  The problem I'm having is that the event handler simple custom ' disappear, despite the call removeEventListener on the Image object.

  The following example illustrates the problem (the example do anything useful... it's just the shortest example to demonstrate the problem).  (To run the application, you will need to provide any file JPEG ol ' named 'myImage.jpg' in the directory 'src' to your project).

  What to expect to happen is:

  (1) at startup, the image loads and runs of loadComplete().

  2) loadComplete removes the event listener so that subsequent re-loads don't get re-triggers the Manager.  I want only the Manager to run once.

  3) 'loadComplete' should appear in the debug console.

  (4) a click on the button should display only 'change picture' in the debug console

  What I get instead is that Manager loadComplete is not removed, and whenever I click on the button, loadComplete runs when the image is re-load (i.e., each button click results in the showing in the debug console 'change picture' AND 'loadComplete' ).

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:Application ' http://www.Adobe.com/2006/MXML "layout ="absolute"> "
  "<mx:Image width ="655"height ="181" source =" myImage.jpg" id ="MyImage" autoLoad ="true"="true"scaleContent complete =" loadComplete () " ="100"x ="100"/ >
  < mx:Button = "100" x = "341" label = "Button" click = "click (event)" / >
  < mx:Script >
  <! [CDATA]
  private void loadComplete(): void
  {
  trace ('loadComplete');
  myImage.removeEventListener ("complete", loadComplete);
  }
  private void click(evt:Event):void
  {
  trace ("change Image");
  myImage.load ("myImage.jpg");    Reload image even; This is just an example
  }
  []] >
  < / mx:Script >
  < / mx:Application >
  

  Hello

  You can only remove event listeners you added with the addEventListener() method in an ActionScript block. You cannot remove an event listener that has been defined in the MXML tag, even if it has been registered by using a call to the addEventListener () method that was made within an attribute of the tag.

  Check this page for reference.

  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=events_05.html

  You can change the code a bit get it works

  
  
  private function myImage_creationCompleteHandler(event:FlexEvent):void
  {
       myImage.addEventListener("complete",myImage_completeHandler);
       myImage.load("myImage.jpg");
  }
  
  private function myImage_completeHandler(event:Event):void
  {
       myImage.removeEventListener("complete",myImage_completeHandler);
  }
  

• Cannot remove an e-mail account - no under account settings removal tool

  Use Thunderbird 24.5.0. Not having only not under one account choice account delete option. I tried to delete an e-mail account, but cannot remove or delete it. I read your solution but no delete option in the drop-down list in the account settings. help lease

  How about you go to the Tools menu > modules and disabling the add-on!

  Not that I can find a "manually change the files' on the site of the add-on.

  I can find a manually records sort that does exactly what it says, but does not add and the columns you show. I can also find "additional folder columns" which aims to give your comments headers. The page Add on like the third picture shows a right click option or click to turn on the power on and off columns.

• Cannot remove the ghost folder. Error message: there is no such mailbox

  When I configure Thunderbird to connect to my Alpine Webmail, I had to rearrange my folders. Cannot remove a folder titled "mail" because according to TB "there is no such mailbox" but still shows on the tab my folders. I read through the previous discussions and have tried to unsubscribe the ghost folder, but that did not work or the other. I have a Mac OSX if this affects what it is. Please let me know if you have any suggestions. Thank you.

  Hello world. I solved the problem... somehow. By removing the account of Treasury Board and put in place again, TB has been able to sync with the files that were on Alpine. The ghost folder still presented (despite not existing not not on the Alpine site), but by changing the directory to the IMAP server of "mail" to "mailbox" the ghost folder disappeared. I found myself with records who have been named oddly (most likely due to the change of the name of directory) so when I changed the IMAP server directory to "mail" it reset my files with the way they were, with the exception of the ghost folder, that was no longer there. I'm not entirely sure why it worked, but in case someone else has a similar problem, I recommend to give it a try.

  Thank you all for your comments and help.

• Cannot remove the flash drive obsolete no matter what I do

  Have tried everything told to do but still support cannot remove the obsolete shock wave. the file is not on my computer. also when I put never activate it does for the latest version. How can I remove what it is causing crashes because the 2 versions

  Hello, please type Subject: plugins in the address bar - it should list all the available plugins, including their location on the file system.