VSNClient.exe - the application failed to start correctly (Oxc0000022) click on ok to close the application.
VSNClient. exe is part of a product called known as VAIOSmartNetwork.exe and it is developed by Sony Corporation.
You will need to re - install or remove in safe mode.
Tags: Windows
Similar Questions
-
First pro cc application failed to start properly (0xc000001d) click on OK to close the application. I get this message after update software. Help, please!
Hi RC,.
Update first Pro CC 2015 (9.2).
Thank you
Kevin
-
Hello
I get the following...
"The application failed to start correctly (0xc0000005). Click OK to close the application. "
Please help me with suggestions?
Thank you
Dimitri
Hello
Thanks for posting the question on Microsoft Community Forums. According to the description, you get an error message "', the application could not start correctly (0xc0000005)." Click OK to close the application"when you try to open Microsoft paint. We will analyze and identify the cause of the problem.
1. are you aware of changes to the computer before the show?
2. is it limited problem specifically with Microsoft Paint?
I suggest you perform the steps:
Method 1:
Put the computer to boot and search for the issue.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Once you are done with the boot, follow step 3 in the article by putting your computer to normal startup.
Method 2:
Perform a SFC scan on your computer. Consult the following link:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Hope this information helps. Please respond with more information about the issue so that we can help you.
-
Error 0xc000007b when access to the game.
I have a new laptop with windows 8 pro 64 bit OEM gamesI installed directx, C++, enabled Net Framework of windows features to play the souls and similar stuffeach of these programs is updated, I need for speed most wanted 2 and Fary Cry 3 and I have installed on my computer properly
Now when I try to run the game it gives this error again n again. I am tired, put it back, with compatibility mode does not change, I checked my anti-virus and firewall if they use shields to block some people, said that the application tries to load another bad dll files say that it's a 32 and a matter of 64-bit well honestly, I don't know what to do my friend has the same operating system windows 8 pro and everything works fine with it , I was hoping that you help me to find a way to solve the problem and try to properly load NFS and FAR CRY 3. This is the error
NFS.exe - Application error (the application was unable to start correctly (0xc000007b). Click OK to close the application.)and I thank you.
My laptop Specs are
HP laptop pavilion g6 Core i5 2.50 Ghz 3rd generation, 4 GB ram, 500 GB HDD, ATI HD 7000 graphic card series 2 Gb GDDR5
Kindly solve my problem, I'll be very grateful
(new method also microsoft don't know)
guys I have a solution to error 0xc000007b.
you just just to1: Download "msvcr100.dll" in 32 bits.
http://download.dll-files.com/0e37fbfa79d349d672456923ec5fbbe3/msvcr100.zip?0XEjQGdGiV
2: stick to
C:\Windows\System32 (Windows XP, Vista, 7, win 8)
If you use a 64-bit version of Windows, you also need to place the .dll file in
C:\Windows\SysWOW64\3: done
If you have 64-bit windows then no problem you just download "msvcr100.dll" in 32 bit 64 bit not only then stick two directories mentioned above.
Thankx
(Sorry for my BAD ENGLISH)
-
The application was unable to start correctly (0xc000007b). Click OK to close the application. Help!
Please see:
Flash.exe & Dreamweaver.exe error 0xc000007b
How to repair (0xc000007b) error easily for all the works of Windows 7/8/8.1/10 (resolved) - YouTube
I hope this helps.
Concerning
Megha Rawat
-
I have the free 30 day trial of Lightroom, but were unable to open the application. I get the error in the Application (0xc000007b). Does anyone know how to fix this?
Hello
We can see: -.
"The application was unable to start correctly (0xc000007b). Click OK to close the application. »
Hope this helps!
-
Hello
I was working on the Prime Minister yesterday and today I tried to open my file, but it said that my file was created on a previous version of the Prime Minister. So I tried to find an update for the Prime Minister and ran the update. Then I tried to open the program and I get this error message "Application could not start correctly (0xc0000142)." When you try to open Adobe Premier. I tried to uninstall the first pro and put it back, but I still get the same error. All my other apps by CC work very well.
Help, please!
Thank you for the update.
I apologize, it was recorded as a BUG with AMD processors. Last update does not work for the AMD Phenom processor.
I suggest you go back to a previous version of 2015, i.e. 2015.0
-
What is this and why aren't I see this once in a while?
Hello
Welcome to the Microsoft Answers Forum!
Please provide us with more information.
(a) on the computer what operating system do you use?
(b) when exactly do you get this error message?
Make sure that the windows service install is running on the computer.
Steps to start the Windows Installer service:
1. Click Start, type Services.msc and press ENTER
2. double-click on Windows Installer
3. set the automatic startup of Windows Installer type / Manual
4. Click Start to start the service.
5. apply the settings.
I hope this information helps. Please get back to us if you have any other questions on this subject.
Thanks and greetings
Mir - Microsoft Support
Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads -
Adobe Premiere Pro - application failed to start correctly (0xc0000142)
Hello
Recently I got this error when I try to start Adobe Premiere Pro:
I tried using the Adobe Creative Cloud cleaning tool to remove all Adobe apps and then put it back, but it did not work. Does anyone have any suggestions? The number (0xc0000142) means something? I don't really know what could have changed to cause the Premiere Pro suddenly do not work.
Thank you for your time!
Error 142 Premiere Pro https://forums.adobe.com/message/8352299
-
Premiere Pro 2014 CC works very well. PP 2015 for a while had the "cannot find the modules of able video games" before the installation of the last update. Graphics card is a NVIDIA Quadro 2000 D, 64 bit, Windows 10 system.
Most applications other cc 2015 works well (Prelude has the same question, I found). Suggestions? Have tried to uninstall, move, latest video drivers, etc..
Hi Scott,.
Update for Premiere Pro CC 2015 (9.2) for a fix.
Thank you
Kevin -
I have a problem that only occurs during the closing down. When I select Shut Down I soon get a pop up that says... the application could not start correctly (0xc0000142) click on OK to close the application. window label is cmd.exe. Whether I click on the window, closing down product and eventually after say 30 seconds the alarm disappears. clicking on the alert simply displays another alert. This only occurs during the closing down. Also, I have no problem to launch cmd.exe during the normal operation, or any other program running in the command window. I read a few posts but don't see anything exactly like this, what happens during closing down.
Suggestions would be appreciated. Eric
HelloPlease check if you are facing the same question when working in safe mode.
a. restart your computer.
b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
c. using the arrow keys, select the desired option of Mode without failure.
d. press the Enter key on your keyboard to boot mode safe mode of Windows 7 with networking.
e. when Windows starts, use check and Internet explore if the problem persists.For additional information see the articles below.Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-modeTroubleshooting in safe mode
http://Windows.Microsoft.com/en-us/Windows7/troubleshooting-problems-while-in-safe-mode
If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article. -
Application of Lightroom 3 can not start correctly
I get an error message saying that the application has failed to start correctly (0xc000007b), click ok to close the application. Other research is displayed the location of the temporary file is not found for lightroom 3 64-bit, that he wants me to find or reinstall lightroom 3. The problem is that my software is 16hrs away from me and I forgot to save it when I first got to the school in July 2010. I'm not sure what I can do here, but I need for school. Can I just download a trial version and until I can fix this problem, or is there a way to fix this?
Based on the user comments and suggestions, we have updated our documentation on this subject with a few new solutions.
http://helpx.Adobe.com/Lightroom/KB/error-Unable-start-correctly-0xc00007b.html
We are locking this thread. If you have any other questions or still see the error, please continue the discussion on this thread: http://forums.adobe.com/message/4836005
-
Hello
I have a problem with Captivate 6 installation on Windows Server 2008 R2. I have 2 different scenarios where I tested it, but the result is the same.
1. I used AMEE (Application Manager Enterprise 3.1) to create the installation of the deployment via SCCM 2012 Package.
Note that the current package works fine on Windows 7 (x 86 and x 64), but not on 2008 R2 error after I tried to launch the Captivate.exe application.
The error indicates that there is a missing file: libwinpthread - 1.dll and if I copy and made a recording of the present. DLL file then he sends another error saying: on-demand failed to start correctly (0xc000007b) so he won't ever let me launch the application.
2 now, if I install the package directly from the Original sources (CD) without creating any package AMEE after completing the installation, I have always the same error about the missing DLL file.
Is there a fix or workaround to install 6 Captivate on Win2008 R2?
Thanks in advance and greetings.
This seems to be a generic question unrelated to Captivate. Here is a site that lists the possible causes.
How to fix Libwinpthread - 1.dll is missing / not found error
I don't know if their solution works well.
Anthony
-
I have a Dell all-in-one that I had to send for a new motherboard. While they have it, I got them the reformat. I'm trying to put Skype on it, but I get this error message once downloaded and when trying to install: " ", ", the application failed to start correctly (0xc000007b). Click OK to close the application. " I am running Windows 7 Home Premium 64-bit. None of my other programs I had to reinstall caused me a bit of trouble, but Skype won't move past this error message. Any help would be appreciated.
I thought about it. I couldn't install it from Chrome, but I did of IE and it's fine now.
-
Vista message mwlDaemon.exe error
At the start of Vista, I get the message "mwlDaemon.exe. - unable to locate component Application has failed to start because sysenv.dll was not found. Reinstalling may correct the problem"Question is how should I do this? Most programs work OK, but I think the problem might be preventing a backup is made.Hi Thegardener,
· How long have you been faced with this problem?
· You did changes to the computer before the show?
Follow the steps below for a possible solution:
Method 1: I suggest you perform the clean boot and check.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 2: If the method above is not enough, you can try to uninstall and reinstall the application.
You can see the article for more information about the uninstall of a program.
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
Hope this information helps.
Maybe you are looking for
-
Copy past Photos in the Newsroom and lost photo EXIF data
Mac Pro OS X El Capitan to 10.11.6 and Photos Version 1.5 (370.42.0) Question: when I do a copy paste a photo of Photos to my mac desktop, the copy is made, but I lose the photo information (EXIF data) and especially the date that the photo was taken
-
How to merge three documents together?
I have three different documents that I need to be in one. Is anyway to do this?
-
As the title says. What should do?
-
Need help - bad, I tried
Hello Like many others, I also want to open the pictures folder and retrieve the names of files in it. I had alook at fileExplorerDemo and other discussions on the site. With help, I started with this code: private void seeFiles() { javax.microediti
-
If you look at the documentation of the API for net.rim.device.api.system.PersistentObject, you will see an example like this: long MY_DATA_ID = 0x33abf322367f9018L; Hashtable myHashtable = new Hashtable(); PersistentObject persistentObject = Persist