vSpere 5 Networking of best practices for the use of 4 to 1 GB NIC?

Similar Questions

• Best practices for the use of reserved words

  Hello
  What is the best practice for the use of the reserved words as column names.
  For example if I insisted on the use of the word to a column name comment as follows:
  
  CREATE TABLE...
  VARCHAR2 (4000) "COMMENT."
  ...
  
  What is the impact on the track I could expect and what problems should I be informed when doing something like that?
  
  Thank you
  Ben

  The best practice is NOT to use reserved words anywhere.
  Developers are human beings human. Humans have their moments to forget things.
  They will not forget to use the "", or you can force it to use the "' everywhere.
  The two methods are Oracle certified ways to end up in hell.

  ----------
  Sybrand Bakker
  Senior Oracle DBA

• Spectrum X 360 (N1W02PA #UUF): best practices for the use of the power supply battery for laptop (spectrum X 360)

  Hello.

  I know the best practice to use the power supply to charge the battery? I heard that keep charging your battery while using Notepad deteriorate autonomy. I don't know if that's true, but I do not charge my spectrum X 360 at 20% power level.

  Kindly need some expert advice. Thank you.

  Hello:

  My recommendation is to follow the instructions provided in this document from HP to address... paying particular attention to the info listed according to the recommended battery care practices.

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c00596784

• Best practices for the use of the DPS and cloud logins creative?

  Hi-

  I did have a chance to respond to my question via Google... If there was a previous topic posted on the forum about it, my apologies.

  We users of DPS Pro for several years now, and in the early stages of the evolution of our software to cloud creative teams. We always use the Pro DPS account to produce a monthly magazine for iPads, Android and Amazon devices, but I'm trying to understand how our connection CC and 3 different connections rendition DPS will play together.

  Right now, we're on CS5.5, so when we publish to different renditions, we record and off the Folio Builder when we need to access each account:

  [email protected]

  [email protected]

  [email protected]

  Once we move to CC, I'll be connected to this account (for me, there [email protected])-who is also mentioned as having access administrator and DPS App Builder in the dashboard of the Administration of our account Pro DPS. DPS account

  Is there a way to get my CC/DPS [email protected] connection to allow me to create renditions in the three accounts - magazine, magazine_droid, magazine_amazon - or I have to log in and out of the Folio Builder in InDesign CC to create these "renditions", as we do in CS5.5?

  And if it affects my CC updates somehow to log in and out of all these accounts?

  Thank you in advance for your help!

  Kristina

  Your journal in the constructor of folio and your journal in CC are separated.

• best practices for the storage of the vm and vhd

  no doubt this question has been answered not once... Sorry

  I would like to know the best practice for the storage of the vm and its virtual hard disk to a SAN.

  Any show advantage does make sense to keep them on separate LUNS?

  Thank you.

  It will really depend on the application of the virtual machine - but for most of the applications no problem by storing everything on the same data store

• Best practices for the compression of the image in dps

  Hello! I read up on best practices for the compression of the image in dps and I read the asset from the source of panoramas, sequences of images, Pan and zoom images and audio skins is resampled not downloading. You will need to resize them and compress them before deleting the in your article, because the dps do not do it for you. Hey can do!

  So Im also read as he active source of slideshows, scrolling images, and buttons ARE resampled as PNG images. Does this mean that DPS will compress for you when you build the article? Does this say I shouldn't worth going bother to resize these images at all? I can just pop in 300 DPI files 15 MB used in the print magazine and dps will compress their construction article - and this will have no effect on the size of the file?

  And this is also the case with static background images?

  
  

  Thanks for your help!

  All images are automatically resampled to based on the size of the folio you do. You can put in any image resolution you want, it's not serious.

  Neil

• What is the best practice for the enumeration for the ADF?

  Dear all,
  
  What is the best practice for the enumeration for the ADF?
  
  I need to add the enumeration to my request. ex: sex, marital status.
  
  How to deliver? Declarative custom components or is there another way?
  
  Thank you.
  Angelique

  Check out this topic - '5.3 fill view object Rows with static data' in Guide of Dev
  http://download.Oracle.com/docs/CD/E17904_01/Web.1111/b31974/bcquerying.htm#CEGCGFCA

• What is the best product for the use of... image gallery to crop, color correct, then re-touching etc.

  What is the best product for the use of... image gallery to crop, color correct, then re-touching etc.

  Hi gardenzio2,

  You can try using Adobe Photoshop

• Best practices for the integration of the Master Data Management (MDM)

  I work on the integration of MDM with Eloqua and are looking for the best approach to sync data lead/Contact changes of Eloqua in our internal MDM Hub (output only). Ideally, we would like that integration practically in real time but my findings to date suggest that there is no option. Any integration will result in a kind of calendar.

  Here are the options that we had:

  1. "Exotic" CRM integration: using internal events to capture and queue in the queue changes internal (QIP) and allows access to the queue from outside Eloqua SOAP/REST API
  2. Data export: set up a Data Export that is "expected" to run on request and exteernally annex survey via the API SOAP/REST/in bulk
  3. API in bulk: changes in voting that has happened since the previous survey through the API in bulk from Eloqua outside (not sure how this is different from the previous option)

  Two other options which may not work at all and who are potentially antimodel:

  • Cloud connector: create a campaign questioning changes to schedule and configure a connector of cloud (if possible at all) to notify MDM endpoint to query contact/lead "record" of Eloqua.
  • "Native" integration CRM (crazy): fake of a native CRM endpoint (for example, Salesforce) and use internal events and external calls to Eloqua push data into our MDM

  Issues related to the:

  1. What is the best practice for this integration?
  2. Give us an option that would give us the close integration in real-time (technically asynchronous but always / event-based reminder)? (something like the outgoing in Salesforce e-mail)
  3. What limits should consider these options? (for example API daily call, size response SOAP/REST)

  If you can, I would try to talk to Informatica...

  To imitate the integrations of native type, you use the QIP and control what activities it validated by internal events as you would with a native integration.

  You will also use the cloud api connector to allow you to set up an integration CRM (or MDM) program.

  You have fields of identification is added objects contact and account in Eloqua for their respective IDs in the MDM system and keep track of the last update of MDM with a date field.

  A task scheduled outside of Eloqua would go to a certain interval and extract the QAP changes send to MDM and pull the contacts waiting to be sent in place of the cloud connector.

  It isn't really much of anything as outgoing unfortunately use Messaging.  You can send form data shall immediately submit data to Server (it would be a bit like from collections of rule of integration running of the steps in processing of forms).

  See you soon,.

  Ben

• Measurement on the side time server? Best practices for the turn-based game

  Hello

  What would be the best practice for measuring time in a turn based game?

  I was looking at the timeout of the room, but to use that it would mean that, for each round, I put users in a new room?

  Is there a way where I can measure time serverside and keep users in the same room?

  If so, I could use php, otherwise, we would need java that allows to measure a time race.

  See you soon,.

  G

  Hello

  You can definitely use PHP or Java - we provide integration of server

  libraries for either. I don't know exactly what is the use case, so I can't

  comment on what makes the most sense, but if it is not information which must be

  totally secure, grading on the client can be a viable approach also.

  Nigel

• Best practices for the application of sharpness in your workflow

  Recently I tried to get a better understanding of some of the best practices for sharpening in a workflow. I guess that I didn't know, but there are several places to sharpen. Who are the best? They are additive?

  My typical workflow involves capture an image with a professional DSLR in RAW or JPEG or import into Lightroom and export to a JPEG file for the screen or printing of two lab and local. 

  There are three places in this workflow to add sharpening. In the DSLR manually into Lightroom and when exporting a JPEG file or print directly from Lightroom

  It is my understanding that sharpening is added to RAW images even if you add sharpening in your DSLR. However sharpening will be added to the JPEG from the camera. 

  Back to my question, it is preferable to manually the sharpness in the SLR in Lightroom or wait until you export or output of your printer or final JPEG file. And additive effects? If I add sharpening to the three places I am probably more sharpening?

  You have to treat them differently both formats. Data BULLIES never have any sharpening applied by the camera, only JPEG files. Sharpening is often considered to be a workflow where there are three steps (see here for a seminal paper on this idea).

  I. a step sharpening of capture which compensates for the loss of sharp in detail due to the Bayer matrix and the filter anti-repliement and sometimes the lens or diffraction.

  II. A creative sharpening step where some details in the image are 'highlighted' sharpness (do you eyelashes on a model's face), and

  III. output sharpening, where you fix the loss of sharpness due to the scale/resampling for the properties of the average output (as blur because of an impression how process works or blurry because of the way that a screen LCD sets out its pixels).

  These three are implemented in Lightroom. I. and II. are essential, and basically must always be performed. II. until your creative minds. I. is the sharpening that see you in the Panel to develop. You need zoom at 1:1 and optimize the settings. The default settings are OK but quite conservative. Usually you can increase the value of the mask a little so that you're not sharpen noise and play with the other three sliders. Jeff Schewe gives an overview of a strategy simple to find the optimal settings here. It is for the cab, but the principle remains the same. Most of the photos will benefit from optimization a bit. Don't go overboard, but just OK for smoothness to 1:1.

  Stage II as I have said, is not essential, but it can be done using the local adjustment brush, or you can go to Photoshop for this. Stage III, however, is very essential. This is done in the export, the print panel Panel or the web. You can't really get a glimpse of these things (especially the sharpening printing-oriented) and it will take a little experimentation to see what you like.

  For jpeg, sharpening is done already in the camera. You could add a small extra capture sharpening in some cases, or simply lowering the sharpening in camera and then have more control in the post, but generally, it is best to leave it alone. Stage II and III, however, are still necessary.

• Best practices for the implementation of META tags for content items?

  Hello
  The portal site, I am responsible for the management of our content (www.sers.state.pa.us) runs on the following WebCenter products:
  
  WebCenter Interaction 10.3.0.1
  WebCenter Publisher 6.5
  WebCenter Studio 2.2 MP1
  10gR 3 content services
  
  The I work for the Agency is one of many for the commonwealth of PA, who use this product suite, and I meet some confusion on how to implement META tags for content of our site, so we can have effective search results. According to the [explanation of META tag standards W3C website | http://www.w3schools.com/tags/tag_meta.asp], description tags, keywords, etc., should be between the cephalic region of the HTML document. However, with the configuration of the suite WebCenter is implemented, how the head section of the HTML is closed at the end of the model code to a common header portlet. I was advised to add fields to our entry presentation models and data for the content to add these meta fields, however, since they are then placed in the body section of the HTML accordingly, these tags fail to have a positive impact on search results. Instead, a lot of our content points, when searched, the description in the search results displays only the text that appears in the header and the left navigation of our model, which arrived earlier in the body section of the HTML.
  
  Please advise possible or methods that would be best to implement the use of META tags so that we can our pages containing content to come to the top in the search results with relevant data.
  
  Thanks in advance,
  Brian

  Basically, you want to add tags portals in the presentation model to move the meta tags of the element of the header of the actual document content. Check out http://download.oracle.com/docs/cd/E13158_01/alui/wci/docs103/devguide/apidocs/tagdocs/common/includeinhead.html

  email me if you have problems with thezmobiegroup.com andrewm

• Best practices for color use in Adobe CC?

  Hi all

  Is there an article that describes the best practices for use of color in Adobe CC?

  I produce a mixture of viewing online (PDF, for the most part) and real world print projects - often with the obligation for both. I recently updated my PANTONE + bridge books for the first time in ages and I am suddenly confused by the use of Lab colors in the Adobe Suite (Illustrator and InDesign).

  Everything I found online, looks like Lab color mode preferred to use because it is device independent. And perceptual (on screen), it looks much closer to the color, it is trying to represent. But when I mark a Spot color Illustrator rectangle using laboratory coordinates, to the sides of a rectangle using PANTONE + bridge CP and then export it to PDF, the version of CP to mix CMYK color corresponds exactly to my Pantone book - while the version of laboratory (after converted to CMYK using the ink Manager) is far away.

  I have this fantasy to manage only a single Illustrator or InDesign file for both worlds (PDF) printed and online. Is not possible in practice?

  Any info describing the basic definitions of the color modes - or even a book tracing more than use them in the real world - would be much appreciated!

  Thank you

  Bob

  Here are a few best practices you can already do.

  1 make sure that your color settings are synchronized on all applications.

  2. use a CMYK profile appropriate for your print output. Lab spot colors convert to CMYK values based on the CMYK icc profile.

  3. include icc profiles when save or export pdf files

  In theory, your imagination is possible today. It requires color management and the use of icc profiles. You can place RGB images in InDesign and use Pantone colors in your objects. The problem lies in the printers. If a printer uses a RIP with built in Pantone library, the colors will match when printing. Unfortunately, this kind of CUT is more expensive and not enough printers use them. Most of them is always manually approximate CMYK values composition given Pantone colors.

• Best practices for the redundancy of the network in vSphere 4

  I'm running a cluster of production with 3 3850 m2 running at this time around 70 machines virtual, with more to come in the future.

  I have 6 CARDS each to use for networking.

  I'm not sure which is the best award of the NICs process.

  The redundancy for the VMKernel can I?

  Team for the Service Console NIC?

  I currently have the following:

  vswif0 Console of Service vmnic0

  vswif1 network of the VM vmnic3, 4, 5

  vswif2 VMotion vmnic1, 2 (different subnet)

  I have need of 3 NICs for the virtual machine or should I team the Service Console?

  It would be better to put a second Service Console on the Virtual Network machine's power switch, or do I have to put it on the switch of VMotion?

  My prefereence is for VMotion switch, but I'm ready to hear the recommendations of those wiser than me!

  I have 8 currently

  2 > SC (1 active, 1 standby on separate physical switches)

  3 > VMotion, FT, customer iSCSI PG (Etherchannel) MTU = 9000

  3 > VM PG VLAN (Etherchannel)

  previous to this, I had 4 I did:

  2 > SC, (2 active) VMotion, VST (vSwitch VLan Tagging)

  2 > VM (2 active) VLAN, VST (vSwitch VLan Tagging)

  Saw some problems with STP so separated back SC.

  6 as you do it sounds like a very good Setup.

  (2) SC, VMotion (active on each, Eve for each)

  (4) networking VM

  Don't forget that just them having active only effects not inbound traffic coming out unless you have all these ports in an Etherchannel configuration.  There is an example in the kB for this.  But depends on the amount of traffic all VM networks have if they network traffic a lot you could get by with less ports there.

  The SC definatally you want some kind of uplink port intelligence network as with ESX SC with HA ports check insulation network through these ports, so if this one is down which could lead to problems of isolation.  It's not like you'll do any FT? so it's something else to think about with the installation program.

• ESXi 3.5 U5 - best practices for the collection of NETWORK adapters

  Hello

  I'm using ESXi 3.5 U5 installed on a Dell PowerEdge R710.

  This server has 4 NETWORK cards

  I want team two network adapters to the default value 0 of the Virtual Switch.

  What are the best practices to achieve this?

  mdsuser wrote:

  I want team two network adapters to the default value 0 of the Virtual Switch.

  What are the best practices to achieve this?

  It depends on what you want to achieve. Fault tolerance, the aggregation?

  Take a look at this document from VMware.

  If you use your search engine of the day and throw it into the words "VMware ESX" and add circuits or consolidation, there will be some hits on various blogs showing solutions to different hardware (in collaboration with Cisco, HP switches).

  Addition:

  This page will also give you an overview of the different types of networking topics virtual.