vSphere 5.5 kickstart to configure the static IP address

Similar Questions

• Cannot configure the static IP address for Cisco Touch 8 "

  Hi all

  I found that I can not configure the static IP address for Cisco Touch on TC7.0.1 / 7.0.2 with the procedure described below.

  1. upgrade a codec (e.g. SX20 TC6.3 or less) and a touch paired with the codec for TC7.0.2.

  2. after the upgrade, désapparier (with the help of désapparier Touch button) touch and it reboot.

  3. tap on "IP settings."

  4. Select "Manual IP allocation".

  5. Enter the IP address, subnet mask, default gateway, and then press "Save".

  Even though we have configured the static IP address with the above procedure, IP allocation remains 'Auto' (= DHCP) and the IP address, subnet mask, default gateway is also empty.

  In this situation, the only way to configure the IP address for the Touch is to use the DHCP server.

  I guess many users uses the static IP assignment like us, so please fix it as soon as POSSIBLE.

  Best regards

  Kotaro Hashimoto

  Hi Kotaro,

  It is a known problem in TC7.0.1 and TC7.0.2. The id of the bug is CSCum82147.

  To work around the problem, set IP address you want the button before moving on to TC7.0.x.

  The bug has been fixed and will be included in the next version of the TC software.

  Kind regards

  Jonas Tysso

• How do I configure a static ip address in windows PE (for windows 7)?

  How do I configure a static ip address with subnet mask and default gateway in windows PE (for windows 7)?

  Probably in the same way as in Windows 7: Control Panel / network connections / network card / properties. If you need a more detailed explanation, it would be best to ask your question in a forum of Windows PE.

• network connection does not work on the static ip address

  Hello:

  I am newbie for vmware, recently, I've converted a windows 2008 virtual domain controller, after the fact, everything works fine on the IP of the DHCP, but after I change the static ip address, I can always ping the IP but the DC lost its functionality and internet does not work.

  Any idea or help that can make my static ip, would be very grateful if someone can help! Here is my network configuration:

  

  Hello and welcome to the community

  There are a few things to consider in this regard

  First of all, it is not a simple task to change the IP address a domain controller, so I don't know what procedure you followed

  Just in case, here is the procedure to do so:

  http://TechNet.Microsoft.com/en-us/library/cc794931 (WS.10) .aspx

  Second of all, to virtualize a domain controller also has a specific process that must be followed.

  Most of the people prefer to create a new virtual domain controller and move all of the above roles.

  Here are two rounds, that you might find useful:

  http://communities.VMware.com/thread/209813

  http://communities.VMware.com/thread/209889

  Don't forget to assign points if you find this useful/correct

• Set the static IP address on KD-55X8500C

  Hi all

  How can I manually set the IP address used by the TV when I use the wireless network connection?

  Ian

  Raven-AU wrote:

  Thanks for the reply.

  But I wasn't asking questions about a reservation in DHCP I was wondering how to set a static IP address on the TV itself when using the wireless network.

  Because you don't want to do it on your router, you must go into your NETWORK settings and wireless to do it on your Android TV... 'Advanced settings' allows you to choose the IP DHCP or static. Once you choose static, you can enter the number that you want to use.

  Use the main parameters at the bottom of the home page to see all the options in network. Ability to set the static IP address is here in advanced for each type of connection separately

• Spectrum of HP x 360: how to assign the static IP address

  Seeks to use my Wi - Fi business, I need to use a static IP address, as well as the WPA/WPA2 PSK security password.  I can't find where to enter the static IP address.  I think I may also need to modify the DNS 1 address and gateway.  Can tell me where to access these settings in any case? Thank you!

  My Wi - Fi works perfectly at home, which does not use a static IP address.  Also, the laptop shows the work of network WiFi SSID and tries to connect to it, but can't since I did put in the settings above.

  @BlueCyclone

  Take a look at the following: Static WiFi IP address

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Bind the MAC to the static IP address with WRT54GL router

  Hello

  We use the WRT54GL Wireless router to connect 4 pc to internet. One of these pc requires a static IP address, because the router can do only reliable port-forwarding for IP static (I would ssh it and use it as a web server). I was told that this router has this ability, but for the life of me I can't find.

  Could someone tell me how to proceed? I am running the latest firmware (v4.30.11).

  Thanks in advance for your reply,

  Michiel

  DD - WRT is fairly stable and well maintained. There are a lot of people using it and you get excellent support, if you don't mind not very technical responses to opportunities. Generally, the flashing of the firmware does not support the warranty. But that wouldn't be a problem if you have had a bad flash. And even for a bad flash you often have options to recover the router.

  For the static IP address on the computer, change the settings of network to the ethernet interface. I do not know Gentoo you should have administration GUI for this somewhere.

  You can use the following values:

  IP (as mentioned earlier) for instance 192.168.1.10
  subnet mask 255.255.255.0
  address of the gateway 192.168.1.1
  192.168.1.1 DNS server

  As long as the static IP addresses do not conflict with the DHCP server address pool create there will be problems running some static IP computers in the same local network with DHCP clients.

• How to configure the e-mail address of the form home and contact me form

  How to configure the e-mail address of the form at home and contact me form. I got two WARNING when exporting my muse as HTML file

  Muse will give the alert message if the e-mail address used is not on the same domain as hosting many platforms is not supports the emails from the external domain.

  You can check with your accommodation, where they take over other emails from field so it will not be a problem and you can ignore the warning message.

  Thank you

  Sanjit

• How can I configure a static IP address in Windows Server 2008?

  original title: set static IP of Server 2008

  I have a Server 2008 R2 from a CD of demo loaded on a Dell computer.
  When I start my Poweredge 1950 server, I get these messages:
  ' F/W initialization devices 0% '.
  info on the RAID drivers
  "(HA-0 9Bus 2 Dev 14) PERC 5 / i integrated 5.0.1 - 0030"
  "The battery material is missing...". »
  "Source 1 or logical drives on the adapter to the host.
  Logic of 1 drive (s) handled by BIOS
  some information about the remote access configuration utility
  and then he told me that the IP subnet, gateway, are all 0.0.0.0

  I have to hit F1 to continue the boot or F2 to run the Setup utility.

  In the configuration under embedded devices utility, two network cards have TOE activated ability
  I don't seem to be able to assign the NETWORK adapter a static address, and he poses problem when I try to put in place AD DS services
  Server 2003, I read that the TOE function on the NETWORK card is loaded.  I can't disable in the BIOS screen.  I see solutions for
  This manipulation for Server 2003, but nothing for 2008.

  When I try to use installation of AD DS services in advanced mode and get to the screen to select additional options for this domain controller, and I check the DNS of the server, a warning is displayed saying that one or more physical network adapters don't have a static IP address.

  Any suggestions on how to set the static NIC card?

  Thank you

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Changes to the network when the reconfiguration of the DHCP server to the static IP address

  I installed new positions of work on my network and had WDS push the image so we have installed DHCP to do this. After all the work stations were Setup, I started to change static IP DHCP on the workstations as we prefer to use static IP addresses.  Some computers work fine, some don't. The problem I have is when changing from a static IP, as active network passes the network of the area to the Public network. However, when it is configured to use DHCP, the active network is the domain network. What am I, I missing which will cause the active networks of change to public networks at the static IP change? I checked the settings ip IP, Subnet, DG and DNS and they seem correct. I tried to withdrawal, join. I tried the update NIC driver. I tried to uninstall the NETWORK adapter and reboot. If anyone has seen this before?

  Hi JFK @,.

  Thanks for posting your query in Microsoft Community.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro/

• Is there a way to specify the static IP address for deployment EGGS in the ovftool command?

  Hello

  I'm trying to deploy EGGS using ovftool. I see the option - network and - net available for the selection of the network by name, although I wasn't able to find a way to assign a static IP address in the ovftool command itself. Something like - ip0 = 10.10.10.10. Is there a way we can do that? User interface when we deploy an OVA, we have available to provide IP address, gateway, DNS and network mask.

  Thank you

  Hello, vPupil-

  If the ovf/eggs is created to have definable properties, as an IP of the machine, you can use the "-prop ' parameter to ovftool.exe.

  By literature ( http://www.vmware.com/support/developer/ovf/ovf20/ovftool_201_userguide.pdf), is the syntax to set a property:

  --prop:=
  

  It is near the bottom of page 24, as well as an example.

  To see if the ovf/eggs that you are using has configurable options, you can use ovftool.exe in mode "probe" (page 25).  Just issue the command with only one source, no target, as such:

  > ovftool.exe myAppliance.ovf
  

  This should generate the results of the probe, which should list all configurable properties, including their 'key '.  This key is what you use with the "-prop" parameter.  In the example of probe on pages 25-26, the FVO has two properties, 'db - ip' and 'ws - ip ".  Then you should be able to specify values for these properties by adding the following to your ovftool order:

  ... --prop:db-ip=10.10.10.10 --prop:ws-ip=10.10.10.11 ...
  

  How does do for you?

• Script to set the static Mac address

  I have an Infrastructure virtual with about 200 vm with several vNIC and automatic Mac address. I need to assign static Mac for all NICs for and want to perform this operation with a powershell script and a csv input file. I have the entry csv file that looks like this: Vm, portgroup Mac Vm1 00:11:22:33 Vm1, pg1, pg2, 00:11:22:44 Vm2, pg1, 00:11:44:44 (I know the Mac above are not valid) can anyone help with the powershell code to automate the static configuration of mac?  Thanks in advance

  Hello, ITS.

  You should be able to use the following to achieve:

  ## import the info from the CSV$colNICInfo = Import-Csv c:\vmNICInfo.csv$colNICInfo | %{    $oSingleNICInfo = $_    ## get the VM, get its NetworkAdapters and for the one whose NetworkName matches that from the CSV, set its MAC address    Get-VM $oSingleNICInfo.VMName | Get-NetworkAdapter | ?{$_.NetworkName -eq $oSingleNICInfo.NetwkName} | Set-NetworkAdapter -MacAddress $oSingleNICInfo.MACAddr -Confirm:$false -WhatIf} ## end foreach-object
  

  A few things to note:

  • I left the '-WhatIf "parameter on the Set-NetworkAdapter portion, so that you can run this first (perhaps with a small sample of game in the CSV file) to check that things look like they will work.  Remove this parameter to set the MAC addresses
  • The code provides that the CSV of this format:
    MACAddr VMName, NetwkName,
    someVM, VLAN128, 00:50:56:00:00:0F
  • The cmdlet Set-NetworkAdapter requires the new MAC address in the range 00:50:56:00:00:00 - 00:50:56:3F:FF:FF.  It's not the range likely to use, VMware only a subset.  Seems to be a limitation of the cmdlet (probably intentional).

  Message edited by mattboren: added a note about removing "-WhatIf" to actually set the MAC addresses of the network adapters

• Entered in the wrong the static IP address and now can't come back. suggestions?

  Running Windows7 and try to set an IP address for printer HP 6700 wireless.  It has been 192.168.2.108; I changed it to 192.186.2.250 (implementing the 8 & 6).  So, I restarted the router.  The HP update IP address utility found the new address, I "removed" the old printer and "reinstalled".

  However, it does not print and I can't return to the print server using either the old or new IP addresses.  The print dialogue box indicates that he sent the information to the printer, but opens an error HP screen and says he is unable to communicate with the printer.  I also downloaded and executed the request of the physician HP; did not help to solve the problem.

  I went to the Linksys WRT100 router but can't see anywhere I can control the HP printer.  Any ideas or suggestions are greatly appreciated.

  Hi Bob,

  You cannot access your printer because the configuration of an IP address that is not on your network.  Beaches of normal IP address on routers are 192.168.1.1 to 192.168.255.255.

  You need to restore the default values for your printer to correct the IP address.  It should be done either cold Reset / Hard Reset/NVRAM reset your printer available online.  Sometimes the default values of restoration of the menus of the control panel will allow you to reset the IP address also.  After that reboot is performed the printer must be on your network home and accessible again.

  Let us know if you need the exact steps.

• LaserJet Pro MFP M225: New printer accepts the static ip address, said TCP/IP settings, but nothing is recorded

  Via the network configuration menu, I put the IP address of 'Manual' and entry

  IP address of the printer

  subnet mask

  the gateway IP address.

  At the end of the said printer TCP/IP settings are updated.

  Print a summary of network page shows no data.

  I swapped the ethernet cable.

  Ideas?

  (Thanks in advance)

  Mysteriously, this was probably necessary for the connections to stay together long enough to get friendly.

  I have reset some things on the ATT, plugged and unplugged modem ethernet cable, obtained on other issues, I have to solve... and, Lo and behold, the LCD screen on the front of the printer has started to display the IP address.

  And, of course, the printer works now!

• Assign the static IP address by ISE, ASA VPN clients

  We will integrate the remote access ASA VPN service with a new 1.2 ISE.

  Authentication is performed in Active directory. After authentication, can address assigned to a specific user of VPN by ISE IP?

  This means that the same VPN user will always get the same IP address. Thank you.

  Daniel,

  You can override the IETF-RADIUS-Framed-IP-Address in the authorization policy.

  However if I may make a suggestion:

  Unless you have only a handful of users to do so, it may be appropriate to assign the address of ISE pool or perform the mapping of LDAP attributes on ASA itself.

  In the latter case, the IP addresses are kept on the server as LDAP attributes and ASA will map the IP address. You don't want to keep address IP DB in several places.

  M.