vSphere Client Configuration and alarm

Similar Questions

• QueryResultNotFoundException was lifted when a workflow is called in vsphere client web and select a cluster

  Hello

  I use vsphere vCenter 6.0 and 6.0 Orchestrator vRealize. I save the vRO the vCenter in web client vRealize Orchestrator plugin.

  VRO 6.0 here is a "Add host to cluster" workflow under vCenter-> Host-> check management. I have add this workflow in the web client, so that I can call him when I right-click on a cluster.

  

  I run this workflow and select a cluster in the first stage, and click Next. An error like this:

  com VMware.o11n.Sdk.QueryService.QueryResultNotFoundException: could not find the object of type 'VC:ClusterComputeResource' with the id 'WIN-VCENTER6.MYDOMAIN.COM/domain-c28 '.

  

  I tried a few other env but get the same error. I also tried 5.5 and 5.5 vCO vCenter, and it worked fine.

  Does anyone know if this is a bug or if I can avoid this error by configuring my env? Thanks in advance.

  Kind regards

  Vicky

  Hi Vicky,

  When you have configured the server vCenter by vRO (using 'Add a vCenter server instance' the workflow), how did you address vCenter server - as an IP (for example. 10.20.23.34) or as a fully qualified hostname (eg. WIN-VCENTER6. MYDOMAIN.COM)? Please make sure that it was the last; If you have added your vCenters vRO using IP addresses or short host names, there might be a few problems, so you need to de-register the vRO vCenter and add them again.

• VSphere Client/Vcenter and Datastore

  Hello

  Is it possible to know who were the last 5 virtual machines that were migrated on a specific data store?

  Thank you for your help,

  Kind regards

  Garish

  I see. This would mean THAT DTS is disabled.

  If you need to know which machines were moved manually?

  The fastest and the best way would probably be to query the database of vCenter. In the DB, the word 'relocate' refers to a data store migration. The database is vcdb.dbo.VPX_TASK.

• Is VMware vSphere: install, configure, and manage a must for the VCP4 certification of the course

  Is it possible to learn by myself and then pass the test. I really want to take the exam, but don't have four full days of training. Can I read onlind documentations, as well as working with VMware VC and ESX servers, so I have no chance to proctise. Thanks in advance!

  Yes, you must take an official course of the exam!

• different between "VMware vSphere: install, configure, manage [V4]" and "VMware vSphere: Fast Track [V4]" "

  can someone help me understand different between "VMware vSphere: install, configure, and manage "and"VMware vSphere: Fast Track ", first becuse is about $3,000 and another is about $5000. "

  Thank you

  can someone give me some information about the rules of absente, homework and laboratories, in these classes online.

  You must participate in daily.

  You need a good Internet connection and a fixed phone or a headeset.

  Online courses are generally in central time... but in some cases may be different.

  also should I take a test on these classes?

  NO.

  just be present on these days of class?

  Yes

  I mean those class just for learning or at the end of these classes, I have to pass an additional examination for them?

  The VCP410 exam to be held in a centre VIEW (www.vue.com)... for the use of recording the same e-mail that your use of the course.

  André

• Upgrade to vSphere client 5.1 U1 but using vCenter/ESXi 5.1 (not U1)

  So I saw this recommendation from VMware:

  -----------

  The sequence for vSphere 5.1 update update 1 and their compatible VMware product (2037630)

  If you are using vSphere Client in your environment, it is recommended that you upgrade the vSphere Client to version 5.1 update 1.

  -----------

  
  

  My ESXi servers are still 5.1 (build 799733, some to the build 1021289), and my vCenter Server 5.1.0 build 947673. I should be able to install this patch for the client vSphere on my workstation without problem. It is recommended that VMware, right? That the client must be upgraded, regardless of the version of the host?

  
  

  (I still don't think that the web client (again), so I want to continue to use the vSphere client, if and when I can)

  
  

  Thank you

  
  

  the client is backward compatible, you should be fine

• Workstation / ESXi question - force vSphere Client to enter the CD-ROM drive

  This week I started to develop a practical system at home for me to learn VMware administration and systems.

  I installed ESXi 5 and Windows 7 Workstation 8, which is located in Windows Server 2008 on a server Dell T - 410 have a physical CD/DVD ROM drive.  In Win 7 I have the vSphere client installed and I get successfully to ESXi to manage and install other operating systems, which is where I'm stuck.  Note that, in my computer, I can take my Win 7 OS and in my computer has chosen to "eject" the drive with the OS I want to install.

  I am trying to install several virtual machines and have created two "containers" / "stubs" for these virtual machines (a Red Hat and a Win 2008 Server) but cannot get the vSphere Client interface to take control of the drive and pass it to the open Console.

  It is quite a matrix in the area of the drive options that is available.  What is the secret to be able to do this correctly, because all the videos I watched on YouTube where they are installing a system shows the OS that they install will ESXi very easily after choosing the CD/DVD-ROM drive... time to enter work station, which is where I'm NOT.

  How do I properly set up my CD/DVD-ROM drives in my computer so that ESXi installs the operating system?  I chose each drive letter and the option available but are unable to install the operating system.

  Thank you

  Thomas

  André Pett wrote: I think that we have understood this and that is the reason why WoodyZ mentioned ISO images.

  Yes, thats why I said what I did, and also because it's been a while since I've run ESXi in a VM and when I did I think the only way that I could install the operating system in a virtual machine when ESXi is a virtual computer was too use ISO images, which, of course, since it's my preference anyway it did not matter.  Now I only mention this because I don't remember for sure and using pictures is really the best way to go anyway.  Also, I don't have time to install ESXI in a virtual machine and go through the motions again.

• vSphere Client 5 - blocking of editing DVD error

  I installed ESXi 5.0 Standard on a Dell r710.

  Loaded the vSphere client 5 on a PC running Windows operating system.

  I was able to connect to the ESXi server from vSphere client 5 and create a Windows 2003 server and 2008 Server VM.

  I loaded the Windows 2008 DVD in the local PC running the Windows operating system.

  When I start the virtual machine and connect the DVD containing the operating system, I see the following error message:

  Failed to get the State of the lock on the CD-ROM.

  The virtual machine tries to read the DVD and then I get an error stating, did not find hard drive.

  This happens on both virtual machines.

  Any ideas on what is happening and how I can get the local DVD mounted to install the operating system?

  Thank you

  Yes, but the link also to vSphere Client 5.0 (not only vCenter), anyway try to download the latest version of vSphere client here:

  http://vsphereclient.VMware.com/vsphereclient/6/2/3/3/7/3/VMware-viclient-All-5.0.0-623373.exe

  to see your current version of vSphere client, you can go to the help-> on VMware VSphere

• Unable to connect to ESXi via vSphere Client after you change the setting LAN card

  Dear friends,

  I changed my setting of the NIC (from 100 M to 1000 M) via VMware vSphere Client. And now I can't connect to my server ESXi. Because I can not connect to the ESXi server, the network card user interface of the parameters provided by vSphere client is not available. How can I recover it? Thank you if someone could help it.

  Welcome to the vmware forum!

  Try this

  [root@server root] # esxcfg-NICS-s-100 d full vmnic0

  Of

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1004089

• VMware vSphere: install, configure, manage [V4] still applies for VCP 4.1

  Hello everyone

  I took the VMware vSphere: install, configure, and manage 09/09...will the course of the class

  to apply for the exam for VCP certification?  If so how much time I have left with remaining

  eligible with this class to take the test?

  Thanks in advance...

  Your course was based on 4.0 at the time, the current VCP4 exam is not 4.1 specific as such, if your course still qualifies you for certification. VCP4 is specifically "VCP on vSphere 4", not 4.0 or 4.1.

  Get the review plan later, the study of literature 4.1 (in the case where VMware is updated the review of some elements specific to 4.1) and use the convenient software either 4.0 or 4.1.

  Scott.

  -

• Error loading of VMWare vSphere Client

  Hey guys, I'm a newbie in the world of VMWare and just live my first problem.

  My system was installed by a third party 3rd which, due to uncontrollable circumstatnces, is not accessible at this time.  So, I'm trying to see if someone can have a resolution for me.

  I use ESX 4.  When I open the vSphere client application and enter my login details, I get the heap following errors:

  The specified module could not be found. (Exception from HRESULT: 0x8007007E)

  This application has failed to start because MSVCR71.dll was not found. Reinstalling the application may fix this problem.

  Fatal error VMware Remote Console: (player)

  SSLLoadSharedLibrary: Could not load library libeay32.dll:126

  The last error writes a dump file.

  This app worked perfectly all the time.  The problem started while I was on a business trip last week.  I suspect that some type of update (Microsoft, Java, etc.) is probably what is causing this problem.

  I tried to re-register the dll files, but it has not made a difference.  I would love to re - install the app, as suggested, but I am currently unable to find that the download on the VMware site.

  I'm just curious if anyone has any suggestions, or possibly the location of downloads?

  Thanks in advance,

  Steve

  Open a web browser and enter the address of the ESX host or vCenter - which will take you to a page where you can download the client

• Free version of ESXi can support for configuration of start and stop virtual machines via vSphere Client?

  I have read and found some documents on ESXi.

  According to the documents, I know that ESXi free version does not support some advanced virtual machine configurations and does not support write to ESXi host permission. But when I download ESXi from vmware.com, I can't find the free version. He will always be a trial of the licensed version edition because I can always do the configuration of start and stop virtual machines via vSphere Client installation. I can also run scripts (lamw) pl in vMA to stop the ESXi host (authorization to write ok?)

  Then I confused. How can I get the really free version of ESXi? Or will the free version after 60 days of evaluation?

  Start/stop above configuration is in vSphere Client via 'Configuration'-> "start/stop VM"-> "Properties"... «-> "Allow the virtual computers start and stop automatically with the system" actions setting and stop virtual machines can be configured to "comments"turn off computer"or"Suspend".» Can any body tell me if it's supported by ESXi free edition?

  Is the free version of vSphere Client too? Because when I use the vSphere Client, he told me that I have 60 days of evaluation. This confused me again. I think that vSphere Client is always free, am I right?

  Any suggestion or advice is much appreciated.  ^_

  Micky

  Configuration of start and stop virtual machines is available with the free version and licensed, with the free version you would be configured everything via vSphere Client, where as with a licensed version, you can optionally use scripts to configure it and also issue restarts/stops using scripts.

  Second, shutdownHostViaSOAPAPICall.pl for the version licensed and free of ESX (i), this script will work in both free and licensed because it uses direct SOAP calls emulating the vSphere Client communication. Take a look at the documentation for details, but this of course is not supported by VMware.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• ESXi 5.5u1 added iscsi storage adapter - reboot and now vSphere Client could not connect to "my ip" an unknown error has occurred.  The server could not interpret the customer's request.  The remote server returned an error (503) server unavailable

  I have not yet connect to an iSCSI target device.

  I can ping my host

  when I open http:// "hostip" in a web browser, I get a 503 service not available.

  restart the host gets me nowhere.

  SSH opens somehow, but can not connect

  Console seems OK

  vSphere Client can not connect

  If I reset to the default values of the console it is ok, but when I reconfigure the host, this error will be returned.

  I tried to reinstall from DVD

  I'm completely corrected to date via SSH esxcli

  This happens on both my hosts, although they are almost identical Lenovo thinkserver TS140s with broadcom 10Gig NIC and intel NETWORK card integrated

  It almost always seems to happen the next time I reboot after enabling iscsi support

  The only weird thing I have is that my Integrated NIC is a processor intel 217's and I have to use a special VIB so that it can be used in ESXi

  Customer's winning 8.1

  Here is my installation notes

  Install on USB/SSD stick with custimized ISO i217 NIC driver, reset the configuration and reboot

  Management NIC set to NIC0:1Gig

  IP management: hostIP/24 GW: my gateway

  DNS:DNS on windows vm1, vm2 Windows dns

  HostName:ESXi1.Sub.myregistereddomainname custom DNS Suffixes: sub.myregistereddomainname

  Reset

  Patch to date (https://www.youtube.com/watch?v=_O0Pac0a6g8)

  Download the VIB and .zip in a data store using the vSphere Client

  To get them (https://www.vmware.com/patchmgr/findPatch.portal)

  Start the SSH ESXi service and establish a Putty SSH connection to the ESXi server.

  Put the ESXi server in maintenance mode,

  example of order: software esxcli vib install /vmfs/volumes/ESXi2-2/patch/ESXi550-201404020.zip d

  Re install the Intel 217 NIC driver if removed by patch

  Change acceptance ESXi host sustained community level,

  command: esxcli software - acceptance-level = CommunitySupported

  Install the VIB

  command:esxcli vib software install - v /vmfs/volumes/datastore1/net-e1000e-2.3.2.x86_64.vib

  command: restart

  Connect via VSphere client

  -Storage

  Check/fix/create local storage. VMFS5

  -Networking

  vSwitch0

  Check vmnic0 (1)

  Network port group rename VM to the 'essential '.

  Rename management group of network ports for management of basic-VMkernel traffic.

  -Configuration time

  Enable NTP Client to start and stop the host. ntp.org set 0-3 time servers

  DNS and routing

  Start the virtual machine and stop

  -enable - continue immediately if tools start - stop - prompted action Shutdown - the two delay to 10 seconds

  Security profile

  Services

  SSH - startup - enable the start and stop with host

  Cache host configuration

  -Properties to start SSD - allocate 40GB for the cache host.

  Flashing warnings SSH:

  Advanced settings, UserVars, UserVars.SuppressShellWarning, change from 0 to 1.

  Storage adapters

  -Add - add-in adapter software iSCSI

  I think I saw that I was wrong.  In fact, I applied two patches when only suited. I started with 5.5u1rollup2 and then applied the ESXi550-201404001 and ESXi550-201404020.  Strangely I did not t o had problems until I worked with iSCSI.

• How to configure NTP between Virtual Machines without using Vsphere Client

  I have a group of 8 virtual servers of 5.5 ESXi without an Internet connection. There are virtual machines on each of these 8 virtual servers.

  I did one of these 5.5 virtual ESXi host a NTP server by editing the file /etc/ntp.conf with below configuration and

  started the ntpd daemon. He began to take the time to its local clock, here's the output of ntpq Pei

  IP server 10.108.190.14

  ip address of the client 10.108.190.15

  Server /etc/ntp.conf

  > > driftfile/var/lib/ntp/drift

  > > server 127.127.1.0 maxpoll 4

  > > fondant 127.127.1.0 stratum 10

  | ntpq Pei

  |   refid distance st t when poll reach delay offset jitter

  | ==============================================================
  | * LOCAL (0). LIUX. 10 l 2 64 377 0.000 0.000 0.001

  Then I edited the file /etc/ntp.conf on customers with below configuration but the customer would not synchronize with the server. He

  wouldn t get response from the server. Here is the output of ntpq Pei

  Customer /etc/ntp.conf

  > > driftfile/var/lib/ntp/drift

  > > server 10.108.190.14 iburst

  | ntpq Pei

  |      refid distance st t when poll reach delay offset jitter

  | ==================================================================
  | 10.108.190.14 INIT. 16 u

  Now, when I configure NPT Client/Server on virtual machines through the Configuration Option under Option Configuration time

  in Vsphere Client everything works fine and the client and the server to synchronize with each other. I checked the file /etc/ntp.conf on both the client

  and the server and it has a couple of restrict 127.0.0.1 and restrict the lines added by default kod nomodify etc.

  So why NPT Server featured when enabled via Vsphere Client works very well, but it does not work when it is configured manually

  in the virtual servers directly.

  I was connected to a vCenter Server Appliance through the VSphere Client and enabled the synchronization of time of the NPT.

  I really need to know how to configure the NTP server without using the Vsphere Client so that I can automate the

  task by writing a python script that would connect to each virtual server and NTP Client/Server configuration.

  Any help in this issue deeply appreciated!

  Thank you!

  You can configure the ntp server without using viclient.

  Take a look @ http://kb.vmware.com/selfservice/documentLinkInt.do?micrositeID=&popup=true&languageId=&externalID=1003063

  Hope this helps

  -Assane

• Suite of spring and vSphere Client Web plugins

  Hi, I'm new to this environment.  I'm developing VMware vSphere Client Web plugins.  Installing vSphere Web Client plugins, it is stated that favorite tools include Suite of spring, which is a derivative of the eclipse.  It is an optional component to use the tool, FlashBuilder.  Eventually, the VMware documentation states that you can use Eclipse instead of the spring tool Suite, but different configuration is necessary.

  I write here (instead of VMware/AST) for the following reasons.  I am able to set up the environment without the tool, FlashBuilder.  I am able to develop plugins Web Client without the tool, FlashBuilder.  However, I believe that the FlashBuilder tool will facilitate the development.  When I try to get the FlashBuilder to load, I get no longer things to work; I can't develop plugins Web Client.  Finally, the FlashBuilder tool is the only piece of the puzzle that is a licensed product, and therefore, I won't be able to buy the product if I can't get the trial version to work.

  FlashBuilder has an installer of plugin for Eclipse.  I tried to install the plugin following spring tools, and I tried to install the plugin in a regular version of the eclipse.  In both cases, the problem I encounter is that I cannot locate VMware files and does not have the Virgin service which is present when I didn't have the plugin installed FlashBuilder.

  Someone has no experience or knowledge in FlashBuilder getting to work in this type of installation?  Clearly, it's doable, but using all the documents that I can find online, I can't FlashBuilder work in my environment.

  Thanks for any help or suggestion you may have.

  You should post questions Flash Builder Flash Builder Forum.

  http://forums.Adobe.com/community/flash_builder?view=discussions