vSphere ESXi ssh works, but not able to ping from the inside

Hey man,

I have problem with my ESXi 4.1 straing I just fresh installed on workstation 6.5 and assigned IP address. I am able to ping and ssh on my local network (another PC).

But when I am trying to ping my local gateway of ESXi bash command line, I get the expiration time. Everything works including shared iSCSI and all but vMotion don't work. Is this firewall problem? I don't think that there inbuild firewall in ESXi.

I am able to ping the local interface IP, but no gateway, see below.

~ # ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1): 56 data bytes

-ping 192.168.1.1 - statistics
3 packets transmitted, 0 packets received, 100% packet loss
~ # vmkping 192.168.1.1
PING 192.168.1.1 (192.168.1.1): 56 data bytes

-ping 192.168.1.1 - statistics
3 packets transmitted, 0 packets received, 100% packet loss

Greate that you are to the top and go.

Tags: VMware

Similar Questions

  • Search bar on the Macbook Air doesn't work, will allow me to load the pages of Favorites and links to these pages, but not let me google from the bar or manually enter Web sites, however, it works perfectly on the guest user

    Search bar on the Macbook Air doesn't work, will allow me to load the pages of Favorites and links to these pages, but not let me google from the bar or manually enter Web sites, however, it works perfectly fine on the guest user. Have you tried restarting and it still does not work.

    The problem should be solved now.

    Otherwise:

    OS X

    iOS

    Workaround for problems with the Safari address bar

    http://osxdaily.com/2016/01/05/fix-Safari-freezing-address-bar-use/

  • I can print Microsoft Word and Excel documents, but I am not able to print from the web. I get an error message that says: "Activation - Code 20' - error"Printer Not Activated".

    Activate printer F4580

    I run Microsoft Vista.  I have a printer HP F4580.  I can print Microsoft Word and Excel documents, but I am not able to print from the web.  I get an error message that says: "Activation - Code 20' - error"Printer Not Activated".  What should I do to correct this?

    Hello

    ·          What browser do you use to connect to the Internet?

    The error may occur if the wrong printer is set as default, the printer driver printer is missing, or if there are conflicts in Device Manager.

    Step 1: Make sure that the desired printer is set as the default printer:

    http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  • not able to boot from the CD

    Hello

    I bougt garage a hp lodge 17, im not able to boot from the CD drive.

    It comes with windows 8, and honestly I do not like it.

    I want to start from the CD or for some reason im not able to do.

    It comes to the laptop.

    17.3 laptop HP Pavilion e079nr 17 inch

    https://www.Amazon.com/GP/product/B00GGGIWTI/ref=oh_details_o05_s00_i00?ie=UTF8&PSC=1

    I checked on the start menu and I just change

    CD

    hard drive.

    ...

    ...

    ...

    even its not not booting to the CD

    can you help me with this?

    Hello:

    Unfortunately, I do not know why the DVD player does not appear when you disable secure boot and turn on legacy mode.

  • HP Officejet Pro 8625: I am able to print from windows, but not able to print from Word

    I installed an HP Officejet Pro 8625 wireless to my network.  I am able to scan from my computer and print from Chrome, but am not able to print from Mozzila or Word.  I replaced a HP Officejet 6500 with this device.  I can print from my mobile devices.   Any help would be welcome.

    Hello

    I found the answer to that by trawling for ever, it IS a HP PROBLEM, ARE YOU listening TO HP?

    the fact is that the printer driver will agree that a system administrator to print from some programs, Adobe, Office, Wordpad there more, but if you apply this fix, they will print

    go to the HEART control PANEL > USER ACCOUNTS > CHANGE USER ACCOUNT SETTINGS.

    Drag the slider to the bottom never notify, and then restart your computer.

    works on windows 7

    Indeed, you raise your account to an admin sys, but if HP has got their act together, they would sort this issue, because it is everywhere in their forums.

  • I'm trying to create one named calculation in a field, but not able to select only the required fields, other than all or not.

    Hi all

    I installed "Acrobat Standard DC".

    I've been working on a PDF file to filliable form.

    Then tried to make a calculation in a field, but wasn't able to do.

    When you set up, I was not able to select only the necessary fields.

    field-select_0.pngfield-select_1.png

    I have only be able to select all or not!

    Is that what I'm doing wrong?

    Even trying in "simplified... field. "it doesn't work.

    Thanks for any suggestions!

    Use the space bar to select a single box.

    Wednesday, July 29, 2015, at 14:16, supporth66519991 [email protected]>

  • Not able to scan from the printer to my computer control panel using the HP Photosmart 5510

    Hello

    I recently bought the new HP Photosmart 5510 all in one - and I am not able to scan from my printer to my computer.

    I am however able to scan by launching the scan of the computer. I talked to HP customer earlier this evening and we ran printing + scan doctor and can't find any problems.

    I am running Windows 7-64 bit and that you have installed my wireless printer using the Installation CD supplied with the printer today.

    I could not finish troubleshooting with the technician that I talked to because I had to go to work. The person that I spoke with proposed possibly the full functionality of software downloaded from the hp.com site, which I'm happy to do, but I think that it is useless, because I have the CD of installation here. (The rep that I talked to was very nice, but I prefer not to have to uninstall and reinstall if it is not necessary)

    Because as I mentioned above, everything works perfectly and I am able to scan - but not directly from the printer itself.

    When I try to scan from my printer to my computer an error message appears on the control panel of the printer indicating that: there is no scan destination options of analysis chosen / no..

    However, I can't find anywhere with my HP software where I could add / make sure that the destinations were there. (As I could on my other printers. (IE. By the solution Center)

    This printer does not appear to be a solution center that I could find and the scanner installed with the CD icon doesn't give me any options regarding changing the settings of the parser

    I wonder:

    1. the Hp Photosmart 5510 does not have the capacity to scan from the printer control panel?

    2 OR the CD installation provided with my printer only has the base drivers as the agent of tech support suggested? Which means to scan from my printer I need to download drivers for your hp Web site?

    3. or is the problem because of something else entirely?

    Thanks for your help!

    HI Dublin,

    Follow the steps below to uninstall and reinstall the printer.

    1. open Control Panel

    2. click on uninstall a program

    3 uninstall the Photosmart 6510 in the list

    4 restart your computer

    5. download and install the latest version of Adobe flash player

    http://www.Adobe.com/support/flashplayer/downloads.html

    6 download the drivers and full software functionality, and then reinstall the printer.

    Version 28.8

  • Not able to ping from EXSI and NEXUS of EXSI HOST default gateway

    Hello

    In my topology I use 2960 switch thanks to which are connected the my fabric for interconnection and the NEXUS, I am able to ping ESXI switch but when I ping the blade and the Nexus of ESXI HOST, is not ping and also not able to ping default gateway through EXSI.

    I use X Vlan for all devices.

    Please suggest...

    The first thing is to make sure the VLAN ESX is defined from the NETWORK adapter to the router. the 5K the routing in this case? Also the fabric of interconnections and the pool mgmt of blade must be on the same VLAN / subnet. It seems that the FIM is on

    .7/25 and blade MMIC in sur.100/25. They must be on the same subnet. for ESX, please ensure that your vNIC has the VLAN correct represented and that his license.

    Hope this helps,

    David Jarzynka

  • I'm not able to access my Google and Mozilla Gmail account, but be able to access from the internet explore.

    Last 5-6 months, I'm not able to access my Mozilla firefox google account, but access from IE.
    Following error messages appear...

    "We have detected a problem with your cookies settings.
    Enable cookies
    Make sure that your cookies are enabled. To enable cookies, follow these browser-specific instructions.
    Cookies and empty the cache
    If you have cookies enabled but are still having problems, clear the cache and cookies of your browser.
    Adjust your privacy settings
    If your cache and clearing cookies doesn't resolve the issue, try adjusting the privacy settings of your browser. If your settings are up, manually add www.google.com to your list of allowed sites. Learn more. »

     ... Kindly resolve my issue
    

    Kind regards
    Amit

    Another way to check the specific permissions for the site is to use the Page Info dialog box. While on a Google.com page, either:

    • Right click and select View Page Info > permissions
    • ALT + t (open the classic Tools menu) > Page Info > permissions

    In the dialog box that opens, check the permissions to "Set Cookies" and "Maintain offline storage" and adjust as required. (Example screenshot attached.)

  • 7B BSOD error, 8400 and not able to boot from the disc...

    Hey, I'm workin on a dimension 8400 friends, and his pc yesterday gave a bsod Unmountable_boot_volume for the first time. now, for some reason any, that he was not able to load up on disk xp on his pc, it would just freeze, so I took the hard drive and it brought to my Dimension 5000 and did a CHKDSK Fixboot on it, and it loads perfectly fine on my pc (although none of my drivers are installed (, as well so that I can use any hardware...)

    in any case, I brought back th hdd in its 8400, put it in and got a new BSOD, 7B, which is right after u see a glow of the XP loading screen.

    Now I tried to put in the xp disk, but its hard drives are not recognized by the pc and won't boot anything. I'm not really sure what to do...

    At my disposal, I have a SATS 3.5 external connector, I can do anything to fix it on usb should be...

    If the ideas please?


  • Not able to print from the phone to printer

    My husband & I had the new iphone4s Apple. We also got a new printer Officejet 4622 around the same time. We have everything synced up to w / our PCs, iphones (2), & printer. It was great! As a first step, we could really print Photos, Documents, Etc. directly from anywhere from our phones on our printer sitting at home! But then we did not have our fax plugged in right (we were not able to send or receive a fax at all) so we "thought" was only what was necessary to connect to our fax to power send & receive a fax.

    Now as I said our Phones (2) DO NOT even give us the opportunity to send it to our printer at home more! Help, please!
    Thank you in advance!
    Stacy Bravo

    Hi Stacy,

    I'm sorry to hear that you cannot print from phone to a printer.

    (1) you are trying to print wireless?

    (2) what happens when you try to print?

    (3) you receive an error message/code?

    Open the printer Troubleshooter

    http://Windows.Microsoft.com/en-in/Windows7/open-the-printer-Troubleshooter

    File and printer sharing: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/file-and-printer-sharing-frequently-asked-questions

    Let us know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved.

  • Not able to save from the laptop to the office on a network.

    Hello

    I have 2 computers.

    The #1 computer is a Dell XPS 400 desktop that running Windows XP Media Center Edition Version 2002 with Service Pack 3 directly connected to a Linksys WRT54G wireless router with an Internet connection.

    The #2 computer in a Dell Studio 1737 laptop running Vista Home Premium with Service Pack 1, connect to the Internet and the desktop via the wireless router wirelessly.

    I have no problem, go out to the internet or to see the files and folders that I've shared desktop so that I can pull them up and change them to the laptop.

    The problem I have right now, it is that when I try to open, modify and then save a file on the desktop, I get an error message. Here are the steps that I tried to use a file TEST SAVE.txt that I created on the desktop in order to try to understand the problem.

    1. open the shortcut to my laptop in the folder that contains the TEST SAVE.txt. on my desk

    2. double-click on TEST SAVE.txt

    3. make a simple change in the document.

    4. choose Save in the file menu.

    Using this method, I get this error message.

    "Unable to create file name\TEST \\computer name\directory SAVE.txt.
    Make sure that the path and file name are correct.

    I also tried by repeating steps 1 to 3 above, but by choosing RECORD under in the file menu drop-down. When I do this it tells me that the file already exists, and I want to replace it. When I choose yes I get another error message saying the same thing as above.

    I checked to make sure that the files and folders on the desktop have been properly defined under attributes.

    No READ-ONLY checkbox.
    No hidden check box.

    Still no luck. Prolly something simple that I forgot, but any help in this would keep a few gray hairs to show.

    Thank you

    Hi Vlad70,

    Thanks for posting. Instead of using a shortcut to the file. Can you access the sharing, open it from there and see if you can save it?

    I hope this helps! Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • TTL NI 9401 edge work but not able to count frequency

    Hello world

    I have a CompactDAQ, and a NI9401. I used this hardware with labview to control the speed of the crankshaft. My sensor (optical) output a square wave, amplitude 0 - 5v, TTL compatible.

    I check on an oscilloscope it is perfectly shaped tooth.

    I connect to 9401, and I try these 2 simple .VI attachment and weirdely,.

    the counting of edge work perfectly (and the increment speed matches the speed of the crankshaft)

    But, the frequency meserment or pulse with or period, do not work

    Anyone has any idea why?

    (I struggled for 4 hours and I did not understand it)

    Thank you very much for your help,

    Guillaume.

    Hey, I found my problem,

    I need to plug the wire into the line 5 instead of 4

    I chose ctr1 for example and then count dashboard ONLY works on number 4 and the frequency, period measuremnt etc work only on line 5.

    hard for me.

    Welcome,

    Guillaume.

  • Cannot copy of my printer, but not able to print from my computer to test the page,

    I have a photosmart printer 310a all-in-one. I run on windows 7 64 bit using a dell xps desktop computer.  I used the hp doctor capable of printing the test page with accuracy but cannot print from my computer.  Wireless network works fine.  I check connectivity.  According to the solutions of hp, the printer is online and working properly, but when I try to print it is unable to do.

    Thank you for your help.  I decide to try another computer to see if it is printed.  He did it wasn't the hp printer that was causing the problem. It was the new version of mcafee on my desktop that is causing the problem.  Also, I disabled mcafee found out that I was able to print without difficulty.  I hope this helps other people with the problem.  I tried to fix my mcafee but decide to go with another company for the antivirus and spyware

  • DN1030. Wired WiFi works but not wireless, even after moving the unit next to the modem

    I have great wifi range and cable modem speed.

    My wife saw a video from You Tube Streaming PARTY so I bought a DN1030 to replace an old music receiver and a Blu - Ray BDP - BX510 a player couple so she can listen to the same music through the TV speakers.

    The readers Blu - Ray picked up wireless in 1 minute.

    The DN1030 think for a few minutes and tells me that the connection fails.

    I have temporarily moved the DN1030 next to my modem (it was only 15 feet away) and there was no change.

    I even reset the receiver and tried to update his software (it does not need).

    I temporarily connected it with a Ethernet cable and it works.    Tested with airtime and the PART.    Great flexibility.

    I can't move the modem or connect a cable to the DN1030, so I really need a wireless receiver.  What do you recommend?

    A different model?

    It is highly recommended that you plug your STRDN1030 has / V Receiver to a router or a modem/router and not just a standalone modem because stand-alone modems assign IP addresses to internet equipment as your Sony receiver.

    You can contact your internet provider to get a separate router or upgrade your modem existing to a modem/router device.

    If my post answered your question, please mark it as "accept as a Solution.

Maybe you are looking for