vSphere HA detected that this host is in a network other than the master vCenter Server is connected
Hi all
I try to install a vSphere 5.1 environment (vCenter 5.1 (799731))... It has never been so difficult to get a VMware product running.
Problem:
As soon as I create a Cluster HA (with 2 ESXi 5.1 (799733)) I get the message:
"vSphere HA detected that this host is in a network other than the master vCenter Server is connected"
I tried everything...
vCenter place in other networks
Multihomed vCenter
Place the vCenter in the same network as the ESX host
Doublechecking ip, subnets, gw, name resolution, vSwitches
nothing done... is this a bug?
vCenter and also the two hosts of ESXi now resides in the same L2 network.
ESX1: 10.254.250.74 255.255.255.0
ESX2: 10.254.250.77 255.255.255.0
VC: 10.254.250.29 255.255.255.0
The message may not be correct.
Please... @ someone out there... Help! I'm at the end of my knowledge.
Concerning
Adrian
You can check the configuration of VLANS on your physical switch?
Mike
Tags: VMware
Similar Questions
-
I need to install Microsoft NET Framework 3.5 Service Pack 1, as it is necessary to perform a Dell diagnostic Test, but I've been advised that: Setup has detected that this computer does not meet the requirements to install this software. Requirement: Windows install 3.1.
However, when I look at the download page of Windows Installer 3.1 is not actually as for XP with SP3. I tried anyway and: Setup has determined that the version of Service Pack for this system is newer than the update you are applying. There is no need to install this update. Well actually it is there...
Is there a way to get around this?
See below articles for solution
1 system requirements for the .net framework
http://msdn.Microsoft.com/library/8z6watww.aspx
2 download links for .net framework
http://www.Microsoft.com/net/download
or
http://msdn.Microsoft.com/en-us/library/5a4x27ek
3. top 8 resources for .net framework
http://www.Microsoft.com/net/itprofessionals
4 dependencies and Versions of .NET framework
http://msdn.Microsoft.com/library/bb822049.aspx
5 frequently asked questions
http://msdn2.Microsoft.com/en-us/netframework/aa497323.aspx6. management of versions, compatibility and run side-by-side in the .NET Framework
http://msdn2.Microsoft.com/en-us/netframework/aa497340.aspxGood luck
-
iOS 8.4.1. A newer version of the iPad (9.2) is available, but he says that this version of iTunes (12.2.2) is the current version. How to upgrade my iOS iPad 9.2?
iOS and iTunes are two completely different things. It could be that your computer is not capable of running the version of iTunes need iOS en 9. Have you tried simply OTA update?
-
If the case change the ip address change active directory Microsoft that this issue face our windows network.
as matter
1. any client machine ip address change.Hi Andrew,
The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
Hope this information is useful.
-
Hello
I have 13 element to WIN and just got my MacBook so I downloaded the MAC version of 13 items and trying to allow my serial number, but the message that this serial number is not valid (I type the exact Win serial number I have my account on the Adobe website)
Since version 13 is no longer marketed, I will assume that you are since long TIME 30 days return policy
You'll have to buy version 14 for your Mac... or install a software emulation to then run your program Windows on a Mac
-
I'm transitioning from Windows XP (64-bit) on a new computer with Windows 7 installed. I undertook to VMWare Workstation 6 7.0.1 in the process. The problem is with a very large RAID 5 volume on the new system. It's a score of 5.45 TB (TPG and NTFS).
When I try to start a virtual machine on this volume, I get the message "VMware Workstation cannot open one of the virtual disks required by this virtual machine because it is larger than the maximum size of the files supported by the host file system.". This is obviously not true. If I copy the virtual machine to another drive on the system, it starts without a problem.
Anyone have any ideas on how to work around this problem?
try to add this line in the vmx file:
diskLib.sparseMaxFileSizeCheck = "false".
Maybe it helps.
VMDK-type do you use?
monolithicSparse? -C' is the only part type more?
___________________________________
VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary
-
was informed someone else that my IP address whay I can do
It also comes on my screen that someone other than the same IP address as me, what should I do to change
Hi marionnaismith,
I suggest watching this thread, because it is similar to what you feel:Also, here is an article from Microsoft that provides much more detail on this issue, if necessary: -
"this computer's hard drive is smaller than the original hard drive shipped.
Computer model: p7-1058uk Hi, I'm trying to reinstall my windows recovery kit 7 I bought from best2serve my OCZ Vertex 60 GB ssd Series 3. But I get this error message "this computer's hard drive is smaller than the original supplied hard disk. The recovery process cannot continue"I actually managed to install this recovery on the same front drive kit when I bought first. Any ideas as to why its not working now? I have formatted the ssd drive, deleted the partition and creates a new one with a program called gparted. I can't access my computer until I can reinstall this recovery again kit. Thank you
Hello:
I'm surprised that the same recovery disks set worked the first time. Unfortunately, the error you are getting is the norm. I don't know any solution other than to get a bigger hard drive to the approximate size as the original.
I have a solution for you if you want to use...
If you can read the product key 25 character Windows 7 on the sticker COST Microsoft on your PC, you can download single files Windows 7 ISO to burn it to a DVD for the version of windows (Pro, home) that is installed on your PC, and which is listed on the sticker COST Microsoft on the PC.
You must also select the language installation provided with your PC, or the product key will not work.
Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program.
Use the 25-character product key to activate the installation. It's good for the 32-bit or 64-bit version of W7.
Then go to the support page and drivers for your PC install the drivers you need.
Link to downloads ISO of W7 is below.
http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/
Paul
-
My hard drive crashed and I didn't do a reinstall full Vista no problem here other than do not pay attention, I installed the operating system on one 80 GB disk other than the new 320 gig which was. After the new facility and all new updates, I have 25 GB of free space. I would like to know if I can install new programs on my drive d: and no filling of drive c: for the ability
Hello
Thanks for posting this question in the Microsoft Community Forums.
I see you want to know if you can install programs on a drive with no operating system.
I wish to inform you that this is possible with only specific programs, which give the user an option to choose where the program is installed.
When a program is installed, it runs in program files, which lies in the operating system drive and can not be moved elsewhere.
Another reference:
Microsoft does not support changing the location of the program files
http://support.Microsoft.com/kb/933700
I hope that you found this information useful.
Please get back to us if you have any other questions about windows.
-
The pencil of Apple requires a port light to recharge. Does anyone know a USB male to female adapter port lighteners that would load the pencil on one device other than the iPad?
Apple pencil comes with its own map of woman to woman, so you can use a standard lightning cable USb and charger to charge
Not sure there is no 3rd party yet.
-
VCP5-VTC and vSphere 5.5 - that this kind of things new cover?
Hi all
I have my VCP5-VTC review on 9.12.2013. I was wondering if the version under review covers what's new in vSphere 5.5? What about configuration maximus - what is should I be familiar with?
I asked my instructor for VMware, new courses and he said that VMware will ask the common thing between different versions (5, 5.1, 5.5). Is this true?
Can someone who has been review after release of vSphere 5.5 confirm this?
Well, it's not reassuring. In my opinion, should be a clear statement from VMware that they understand the new version in review. This is especially important about maximus configuration.
I just checked plan review and him I see not everything related to 5.5
-
I bought the last 13 items for download, but I clicked on the link Windows by mistake when I bought it, I own a Mac, how can I change the Mac platform? The Adobe site seems to indicate that it automatically detect that I own a Mac and change the platform, what then? I can't find anything (probably to the search in the wrong place) on Returns or cancel my order. Any suggestion would be great, thanks.
Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)
Get help with orders, refunds and exchanges (non - CC)
-
5.1 ESXi host rest disconnected when it is connected to the new vCenter Server 6
Hello
I created a new version of vCenter Server 6.
I have e vCenter Server 5.1 connect my 5.1 hosts.
I want to connect hosts to the new vCenter and then upgrade to ESXi 6 guests.
I disconnect hosts on the old vCenter.
The I connect hosts to the new vCenter, and it happens with all the vm´s, etc..
But it is disconnected.
And it keeps beeing disconnected even when you try to connect again.
If anyone has experienced this?
Thank you
Thomas
Have you added these hosts in your new server vCenter along with their licenses?
Otherwise, if please add host license in your vCenter license inventory and assign to those of your hosts and then try to re - connect.
-
Displacement of the new vCenter Server (running on vDS) ESX hosts?
Hi guys... as the title suggests... someone can guide me with how best to move the ESXi hosts on vDS linking a vCenter again vCenter?
In addition, outside of losing performance stats, what are the other things I need to keep in mind?
Thanks in advance.
See you soon,.
K
Do you have a chance to see this KB
VMware KB: Spend an ESX/ESXi host with vDS to a vCenter Server to another
Thank you
Avinash
-
I recently discovered this error in my view the event log, do not know how to locate which disc it means or how to disable the setting cache: it's the XML view details screen.
<>disc"/ >"32 3 0 0 x 80000000000000 <>2010-08 - 25 T 04: 28:36.363Z"/ >"85397 System Stu - PC \Device\Harddisk1\DR30F00100001000000000000002000048001000000100000C00000000000000000000000000000000000000000000000000000000000000000 I hope someone can help me with this work out I seem to have nothing else than problems at the minute...Thank youDownload http://www.nirsoft.net/utils/shexview.htmlDisable all non-microsoft shell extensions (to explore) and reactivate aby so this can help.The filmThe Explorer accidents - in the control panel select Problem Reports andSolutions (Type wercon.exe in new task), go to historical problem, right-clickyour mistake and choose check for the Solution. You can also examine the detailsand AFTER the exact text of the ERROR here (that can pinpoint the source of)the error). .You can clean bootTroubleshooting http://support.microsoft.com/kb/331796Windows files for curruption click Start - all programs-Accessories - right on command prompt and choose Run as administrator.Type Cmd in the new task. Then typesfc/scannow--..--"stusalford" wrote in message news: d85b4087-413f-4a7f-840 d-6b9c3ee73f0e...> I have recently discovered this error in my view the event log, do not know how> to find out who he average disk or how to disable caching: this is the> View of XML on the details screen.>>> -> ->>32 >3 >0 >0 x 80000000000000 >>85397 >System >Stu-PC >>> -> \Device\Harddisk1\DR3>>0F00100001000000000000002000048001000000100000C00000000000000000000000000000000000000000000000000000000000000000 >>>>>>> Hope someone can help me with this work out I seem to have nothing> but issues at the minute...>>> Thank you>>>
Maybe you are looking for
-
I have the Vixia RF52 which is used to record my religious services. Internal microphone (VERY sensitve!) picks up the cough, sqweaky chairs and everthing else. What I need to know is if I plug the camers our sound system, the internal microphone is
-
Windows Installer issues, error - Windows install does not (Random pop ups)
Original title: another problem with WINDOWS INSTALLER. everything goes well, then all of a sudden I get that Windows install ins't work so I can't download website to microsoft and windows. I don't want to lose any information so I can do. I think
-
Try to install Kb953297 failed with error 643, and as I look back in my history KB929729 also failed, they all have two do with net framework 1.0. After many comments, I still come across tips to remove all the net framwork and reinstall, it makes me
-
problem to connect to http WI - FI
I'm triying to connect to HTTP using a WI - FI connection, but it gives an exception: net.rim.device.cldc.io.dns.DNSException: DNS error Error code: 7. This error occurs in the las line copied below. This is the code: HttpConnection conn; boolean sto
-
Photoshop cc 2015 deleted automatically selected font
Selected font automatically delete when you try to change the fonts, font-size of the family no matter what.