VT options not available in the BIOS

Similar Questions

• AHCI option is not available in the bios

  HP Pavilion Slimline S5320UK

  Window 7 64 bit

  Installed new Samsung SSD 830 128 GB

  I tried to install msahci using regedit and reboot - but still no AHCI option in bios setting

  I don't think.

  The problem is with the BIOS/chipset

  Unless the PCI controller has its own BIOS where you can set it to AHCI, so no, it wouldn't make any difference on what you have now.

• Series HP Photosmart Prem C310: Scan option not available in the scanners on Mac and Printers dialog box

  I had a problem with my connection Wireless to my printer. I deleted my printer to my preferences system (Printers & Scanners dialog box) by mistake. I was able to add the printer to my Printers & Scanners using the IP address of the printer dialog. The work of connection to printer and I am able to print. However, I lost the option of detection (the Open Scan option does not appear in the Printers & Scanners dialog box). I installed a driver from Apple and I also installed a driver of HP. The driver available for my printer model appears to be a patch only.

  Here is a screenshot of my Printers & Scanners dialog. Before I deleted my printer, she had a scanning tab.

  

  I tried to find a full version of the HP software for the printer but fails.

  Hello

  By consulting the user guide once more tried to locate all the other parameters that may apply, I could personally find not 1 but of course there might be there... as any router have different options and many...

  Have you checked with your ISP that you have the latest firmware for your router? any update of the firmware can help a lot with this kind of questions.

  It is the only router, right? It has no additional effect as a range extender. etc?

  You get power from the strong wifi signal for your printer and computer?

  Please let me know the results with the USB for the moment, the software is there as we have strengthened it even installed earlier...

  Please keep me with any change, I'll try to think of other measures to try while waiting...

  See you soon,.

  Shlomi

• HP Deskjet 5100 taped in grayscale - Management Options not available in the settings of the printer color

  Hello!

  My printer is a HP Deskjet 5100 on Mac 10.8.5. He's stuck on shades of gray, when printing. Any program I try to print in I do not get the color management option, even when checking in the advanced options.

  On photoshop, he's also stuck in grayscale.

  I printed a test page with success in color. But for some reason, no program will be printed in all except grayscale.

  I tried to update the drivers, but the audit of Web/driver HP site, everything is up-to-date.

  Other information:

  In the printer options, I can't even check my rate of cartridge. I have the following message: Information not available

  In ColorSync Utility, under devices, it says the printer Mode is: "grey". When I try to assign a different color profile, do not.

  I did a hard reset of the printer.

  I removed completely and resynced the printer with the computer again in prefs/Print & analysis system

  Any information would be amazing. I checked all the forums that I could find online,

  Hello

  Your printer is not compatible with Mountain Lion, that's why using Mac one driver generic PCL which is black & white drivers only:

  http://support.HP.com/us-en/document/c01856359

  Try a 3rd party like HPIJS driver, it seems your printer support and more likely to provide you with a better results than a generic driver.

  Don't forget to install one of the 3 required uploads before adding to the queue printing:

  http://www.linuxfoundation.org/collaborate/workgroups/OpenPrinting/MacOSX/HPIJS

  Shlomi

• Offline Files Option not available in the Folder Options

  I have a Dell Netbook XP Home Edition is installed.  I want to have the ability to have files available online, but the option does not exist when I go into Folder Options.

  Is this peculaiar for the home edition because the option exists on another laptop on which I have XP Professional.

  Thank you

  Rescuer

  I'm sorry, but Windows XP Home Edition is not the option of offline files. Boulder computer Maven
  Most Microsoft Valuable Professional

• "replace with after effects composition" option not available on the menu: adobe first cc

  Hello

  I use adobe first CC and CC aftermath

  I also have adobe first 2014 CC and after effects CC 2014

  on versions of 2014 I can open a clip as a composition of sequels and it will work simultaneously in both programs

  However, I stopped using the 2014 version when I had a problem with flickering on render (another thread)

  IM happy with the other version (No-2014), but I don't seem to have the same option to replace the clip with a comp consequences in this version

  anyone can shed some light on this?  Thank you

  Hi Matt,

  Ann is right in saying that Replace with Clip is not the same as the dynamic link. This option is Replace with After Effects Composition...

  Since no cutting is selected in the Project Bin, the Replace with Clip option is not highlighted. Select any item in the project Panel to enable the option.

  Replace with After Effects Composition is available in first Pro CC at the bottom of this Menu, which is in your screenshot.

  Thank you

  Regalo

• Create application option not available in the menu drop-down

  I can't access the option 'Create approx...' in the drop down menu to the Folio Builder. All the options in the menu drop-down are there except for the option Create App. Does anyone know why this is the case?

  Thanks in advance for the help.

  Mac only

• 64-bit option not available in the option new file window color Mode

  Hey everyone... my first request here (probably of no importance). I am very new to PS CS5 (64 bit) and as I was just clicking on me happened to notice that there is no 64-bit option in the color mode when you choose file-> new.

  I am running Windows 7 (64-bit) with 1 GB ATI graphics card.

  

  The two are totally, completely different.

  • The x 64 version of Photoshop uses 64-bit instructions to run on the processor in your computer.
  • To the various different color depths define how your pixels are represented in the document of your image.

  Chances are you want to choose 16-bit/channel, as many of the features of Photoshops and filters work with little depth, although some people still use 8 bits/channel because it allows all the sketches and painting tools.

  32 bits/pixel (which also implies a floating-point) is the area of the work of High Dynamic Range.  Fairly advanced stuff.

  -Christmas

• No option of virtualization in the BIOS with the Portege R500

  Hello

  Thought I'd post a new thread as the old man seems to be dead...

  I just want to know if someone has been able to use an extensions of virtualization Portege R500 processor, Linux, Windows or any other OS. I guess that this will become a requirement of mainstream with windows 7 now out.

  If you have been able to use it, could you please put your laptop model correct (it should be on a sticker on the bottom)

  This was my original post, showing that the CPU must support her:

  I HAV a Portege R500 (or a model equivalent, bought the Japan), v BIOS 1.60 and everytime I try to use applications that supports virtualization extensions, I can't. I use linux as my OS, and he tells me that the virtualization extensions have been disabled by the BIOS.

  However, I can't find an option for this in the BIOS! R500 manual (form available from the toshiba support area), there should be an option, just after "core multi processing", I can see:

  Virtualization technology
  Sets of virtualization technologies enable or disable the Intel Virtualization
  Technology installed in the processor.
  Virtualization technology Intel is the technique that allows a machine to
  operated under the name of multiple virtual machines.
  Virtualization technology is compatible with some models.
  The disabled command does not use the Intel Virtualization
  Technology.
  The use of Intel Virtualization Technology Enabled command.
  Virtualization technology allows.
  Activated
  Disables (default) virtualization technology.
  People with disabilities

  But it isn't here!

  In addition, I see that virtualization is supported by the processor - the 'vmx' flag is present. The processor is model U7600, it should be supported. You can see from the Intel Web site:

  http://processorfinder.Intel.com/details.aspx?sSpec=SLV3W

  Anyone know if it is available through he windows BIOS app (although it is not documented in the manual)? Anyone know if it is possible to contact Toshiba and ask them?

  Thanks in advance!

  Hello

  Are you sure there is NO virtualization option in the BIOS?
  Have you checked all the pages?

  I found your other thread on the clearing of password and you said this doesn t work, but maybe it works you need to check the VT option yet!

  More as you say, the processor must support the VT to VT option in the BIOS the Intel Core 2 Duo processor ULV U7600 support VT

  As far as I know there are also a few sets of cell phones where the VT option is not available in the BIOS, but if the processor takes in charge the VT VT is enabled by default as well as the VT option is not present in the BIOS.

• In Windows Media Center, it has an option for Internet TV. When I try to use it, it has a popup that says that this feature is not available in the Canada. I am in Pa, USA.

  Internet TV in Windows Media Center

  In Windows Media Center, it has an option for Internet TV. When I try to use it, it has a popup that says that this feature is not available in the Canada. I am in Pa, USA. I checked the language settings and location, and they are set for English and the USA. I am running Windows Vista. Any help would be greatly appreciated.

  Barb thanks for all your help. I do not have it work, but I've upgraded to windows 7 and now it works.

  ~ James

• Vista HomePremium.SP2. Chnge workgroup option not available but may change the name of the computer. Can not enable file sharing. How Iactivate these options? Thanks in advance, Geoff

  Vista Home Premium.SP2. Working Group change option is not available on the system page, but I can only change the name of the computer. Can not turn on either file sharing. How to activate these options? Thanks in advance, Geoff

  Geoff

  1. If it is the domain controller, you cannot change the name of the computer by selecting network ID and this is normal.
  2. If it is a member of the computer in domain or workgroup, you don't have permission to change the name of the computer.
  .

  See this link for more information

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/a552c6f8-AB02-44e5-9FF9-471ebc7ac1c6/

• Print Preview option is not available in the preferences

  How can I set up my printer Epson stylus photo R 360 to preview before printing. It is not available in the preferences.

  Hi Alfredet,

  Thanks for posting in the Microsoft Community. As the description provided, you are not able to find the preview option before printing to the Epson printer.

  Also answering these questions that would help us to provide the best solution:

  1 do you have the preview option before printing in office, wordpad...?

  2 have had any changes made to the computer before the question?

  The print preview option is a third-party feature that is available in some Epson print drivers. This option is not related to the print preview options that appear in many programs. The third-party products that are discussed in this article are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  Visit this link, ignore the title and send more information:

  http://support.Microsoft.com/kb/282120

  Try to update the drivers from this link and check:

  Software drivers &

  http://eSupport.Epson-Europe.com/ProductHome.aspx?LNG=en-GB&data=wsMoc1iChVELSQlOs2ChrT1xObUtDfIMeyQhNOhIkKwU003D&TC=6

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• Windows cannot access and the bios options are not displayed in the bios options

  Windows cannot access the bios options are not displayed in the bios options, I don't know what the problem is. I've used the laptop and turned on and when I start windows again, there is a usb modem in the usb port (it contains the setup of windows, ubuntu, mac files). That's all that's happened with me, and I get the error in the photos. I have windows 8 x 64 and fujitsu lh532 core i5

  

  Hello

  Thanks for posting your query in Microsoft Community.

  • Why are you trying to access BIOS?

  In case you have problems with Windows 8, you can come back with more information, and we will be happy to answer your query.

  To access BIOS, we recommend that you contact your computer manufacturer help you make changes in the BIOS.

  Warning: Change BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Export the jPeg option not available InDesign CC 2014.

  Export the jPeg option not available InDesign CC 2014. Extension manager says he's here and installed but no show! any ideas?

  Yep, re-installed in design CC 2014, after it has worked well.

• The printer options not available when printing from Lightroom

  Hi all

  I have a problem with the interface of Lightroom 2 (version 2.4, executed in 64-bit mode on my Intel Apple Mac with Mac OS X 10.5.8 (Leopard)) to my printer driver, an Epson Stylus Photo R800.  I can see looking through the forum that there has been a lot of problems with printers, but none as far as I can see that seem to cover my particular problem.

  In the Lightroom print module, after setting everything up, selecting the correct ICC profile for the printer/paper etc. I click on the button "print...". "at the bottom of the right panel to launch the dialogue of the printer.  My problem is that the essential options, I need access to this printer dialogue, namely 'Print setting' (to determine the media type, and print quality) and "Color management", (to disable the printer color management)-are disabled.  To be exact, these options have a line through them, as if they were crossed.  "Print option" and "Setting the Extension" are similarly disabled, while "Layout", "Paper handling", "Cover Page" and Planner "are available.  (See JPEG screenshot attached.)

  If I try to select one of the options not available such as 'Color management' I see the following on the screen error message:

  "The bundle 'Color management' couldn't be responsible because it does not contain a version for the current architecture.  Contact the creator of all here for the most recent version: Color Management 3.09, SEIKO EPSON CORPORATION 2001-Copyright (C) 2005. All rights reserved. »

  The strange thing is, if I print from Photoshop CS3, there is not this problem: "Print setting" and "Color management" are not disabled, and I can make the adjustments I want.

  Coming off the printer prints color are way off if I print from Lightroom, so that from Photoshop, they are great - I guess because of this problem (I can not turn off printer in Lightroom color management, so that I can in Photoshop).

  I guess that this is a problem in the interface between Lightroom 2 and my printer driver, but I find it strange that I don't have the same problem in Photoshop.

  I have re-installed the latest printer driver downloaded from the website of Epson many times, following the instructions to the letter to Epson to remove the old drivers of my machine, to nothing does not.

  I really want to print from Lightroom instead of Photoshop, I like the simplicity of the Lightroom print module.  Can anyone throw any light on this?  Any help or ideas gratefully received!

  Thank you

  Ian

  Just save a driver of printer/preset in any 32-bit application. Then apply this preset when you print from LR runs as a 64-bit application. It is only the interface that is the problem. It should show very well, at least it does with Canon printers.