VXI-11 functions RPC "device_remote" and "device_local".

Similar Questions

• HP 15r-204tx: function keys f2 and f3

  Mr President.

  I recently updated my OS from windows 8.1 Windows 10 by connection to the local network. After the upgrade, I lost some of my drivers (NVIDIA, USB) and lost the functioning of my function keys f3 and f2 which are used to change the brightness. At the present time, I would like to ask you for the process priority to recover my key (f2 and f3) function functions.

  Hey anjanikumar6,
  
  Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

  I understand that you are having problems with drivers on your laptop 15 HP. I'd be happy to help you with that.

  Here you can find all the drivers available for your laptop: 15-n204tx-HP Pavilion Notebook PC

  I strongly suggest the HP Support Assistant.
  
  Here are some useful links for the HP Support Troubleshooting Wizard or by downloading the latest version:
  
  HP Support Assistant
  
  HP computers - using HP Support Assistant (Windows 10, 8, 7)
  With the help of HP Support Assistant (Windows 7, Windows Vista)
  HP PC - troubleshooting HP Support Assistant (Windows, 10, 8)
  HP PC - troubleshooting HP Support Assistant (Windows 7)

  I highly recommend to run the Windows Update tool that it can find and update all the old drivers or missing you need.

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!
  
  See you soon.

• Is function like the function of date and time picker in the ICB 8.5?

  I need the function as "date and time picker control" used in activeX, but my operating system (windows 7 Bits without office software) is not the «Microsoft date controller» and time picker I am looking article in the internet which mention this register the MSComctl2.ocx in the windows\system32, but he could not operator in my operating system (it's not allow to save the controller). Help me, please.

  Already, I discovered that the problem on the service of DTP in the 64-bit Windows 7 could not used. Because, the DTP is 32 bits, it should use the administrator to register the 'mscomct2.ocx file' which must be replace in the % windows/SysWOW64 and used the 'mscomct2.ocx regsvr32.exe"in console windows.

• Help me I have Windows XP. Would be, or could you please tell me what the function keys are and how I could use them?

  I have Windows XP. Would be, or could you please tell me what the function keys are and how I could use them?

  I have Windows XP. Would be, or could you please tell me what the function keys are and how I could use them?

  Function keys are used to things dirrent, depending on whether you are simply Windows or a program of work, and if you work in a program, what program it is?

  This search through the documentation of programs you use. Read also here: http://www.internetfixes.com/definitions/IF01424.htm

• Function "search programs and files" Windows 7 no longer works

  Function "search programs and files" my windows 7 does not work anymore. When I type "notepad" for example on the field "search programs and files" Windows 7 and press ENTER, nothing happens. It is same when I open my 'Computer' windows and try to 'Looking for work', I have nothing. I tried to stop "Windows Search" and turn on again from the Control Panel, programs. It did not help. If anyone knows the number, please help. Thanks in advance!

  Press the Windows key + R > type services.msc and press enter > find it on the list: Windows Search , it must be started and Automatic (delayed start)

  Had installed something before that happens? Perhaps it was caused by a third-party application.

• I just switch to CC to photographers. I downloaded and uninstalled Manager creative cloud several times and whenever I do tab apps under creative cloud wrote "the installation is no longer functional. Uninstall and reinstall... I continue to do th

  I just switch to CC to photographers. I downloaded and uninstalled Manager creative cloud several times and whenever I do tab apps under creative cloud wrote "the installation is no longer functional. Uninstall and reinstall... I continue to do this with the same results

  Please follow the steps below.

  1. Follow the Solution 1 and 2 of error: "unable to install". Creative Office Cloud
  2. Install Creative Cloud Desktop Application using Download Adobe Creative Cloud apps | Adobe Creative Cloud free trial

  Hope this will help you.

  Kind regards

  Hervé Khare

• How can I recover the functions drag horizontal and vertical to center the portions of the image being developed? [was: Question]

  How can I recover the functions drag horizontal and vertical to center the portions of the image being developed?

  1 - question double deleted

  2 the name of the program you are using then a moderator may move this message to the correct program forum

  This forum Cloud is not on the program problem... help a program would be Photoshop Lighroom or Muse or?

• How to import the function of zoom and scroll on the bar chart

  Hello
  I want to import function of zoom and scroll in my diagram bar (application of web fiusion). I have a lot of data and I need zoom and scroll.
  I saw something on the oracle with the creation of bean managed database and the method call to a zoom and scrol earpiece but I don't know how to create a managed bean then maybe someone can help me?
  I am a starter and I need a detailed answer, thanks :)

  If you need a detailed answer, you can ask in the forum, which is not this one.

• JAX - RPC, Webservice and the dateTime type elusive everything

  I need to interface with a web service. I have no control over it, so I can't change the WSDL, the server, or something similar.

  One of the types of data used is xsd: DateTime, a guy who according to it (table 1, JAX - RPC support for data types), is not supported on J2ME. Of my research (on this forum and on the Internet), person doesn't use any date/time/dateTime any form or is ordered to change their WSDL so it it does not use if they intend to use a client on J2ME.

  If anyone has a clue on how to use it, because I said, I have no control over the server or the WSDL. Would be his replacement formatted by a string in the work in an appropriate manner or the JAX - RPC system would say it's the wrong type?

  I used wscompile to get static stubs for the service, I can't compile without figure this (Type has only primitive types, 'UNKNOWN' what wscompile replaces the unsupported types is not cutting it for obvious reasons). Temporarily, I've replaced 'UNKNOWN' with Type.STRING but I don't know if it will work (that's why I asked).

  OK, the base64Binary Type I used was Type.STRING. Then I just ran through the Base64InputStream.decode that does the job. I realized that two types do not work (wscompile is good for a general idea of how a web service must be implemented but horrible to the actual implementation) so I need to rewrite much of the code and decided to rewrite it so that it works better and is more clean.

  Thanks for the help.

  EDIT:

  It was also the help function, I used to convert a string to a timetable so that it works with the web service:

  public static String toSOAPString(Calendar cal)
  {
      if(cal == null)
      {
          return null;
      }
      StringBuffer buf = new StringBuffer();
  
      //Get format
      new SimpleDateFormat("yyyy'-'MM'-'dd'T'HH':'mm':'ss'.'SSS").format(cal, buf, null);
      buf.append("0000");
  
      //Timezone
      String zoneID = cal.getTimeZone().getID();
      int index = zoneID.indexOf('-');
      if(index == -1)
      {
          index = zoneID.indexOf('+');
          /* If no timezone offset exists, it isn't needed
          if(index == -1)
          {
              buf.append("+00:00");
          }
          */
      }
      if(index != -1)
      {
          buf.append(zoneID.substring(index + 1));
      }
      return buf.toString();
  }
  

• Brightness, function keys, WinXP and Satellite Pro A200

  Hello

  I recently bought a Satellite Pro A200 (serial PSAE7E) with WIndows Vista and try to install Windows XP next.
  After hours of hunting for drivers (with moderate success) and try to install a XP in a privileged way (3rd partition main, 2nd is for Vista), I stopped.

  I am not able to get to work a function keys (keys, light, monitor, CPU frequency and wireless) XP. Under Vista, these keys only works when Toshiba Flash Cards application is running - when I turn this app, these keys are also unavailable (why?).

  I browsed a forum and found a few threads also wrote about this topics, update BIOS to version XP
  But I do not found answers to my questions:

  (* 1) * is a software (like FlashCards, but for XP) _Activer under XP system function keys? configuration: (Vista + XP + BIOS for Vista)

  (* 2) * if I install a BIOS XP version, what happens to my Vista system installed on my laptop? It stops stating, or function keys stop responding or even a different Components would be inaccessible?
  Someone has tested the configuration like this (Vista + XP + BIOS for XP)

  (* 3) * it is possible to Flash the BIOS to the version of Vista the XP version and still the version of Vista? (maybye I should Flash the BIOS before you start the system?)

  Currently I use the BIOS version 1.70 of Vista, Vista Toshiba Recovery DVD and XP SP2.

  Hi mate,

  long discussion, short answer:

  1. no it not there no software (no software officially released and taken in charge) that is available for XP on a Sat A200.

  2. your system will operate normally, only the behavior of the function keys on bios level will change. If you Flash the bios with the XP version that the function keys should be available under XP without any software.

  3 Yes, it s definitely possible to reflash the BIOS since many clients have machines with XP and want to use Vista (I never understand but hey..)

  I hope that every question has been answered.

  Welcome them

• Y480 Help! Function of Lenovo and OneKey feature keys

  Hello

  I am very frustrated. I performed a clean installation of windows 7 64 bit on my y480 after buying a new SSD. Later, I was able to install all the drivers. However, when I try to use the fn key to increase and decrease the volume, I have more see the volume bar animation.

  Even with the following:

  1. on the screen caps lock icon

  2. no feature for onekey theater button

  3 no animation to the button mute.

  I would like that all of these features in turn. I tried searching for Lenovo Energy Management Software, but couldn't find Installer for y570 and 470. Energy management has worked for only the animation volume, then stopped working all together.

  In addition, I tried to install onekey theater, but even if I manually open the icon 'start onekey theater', there is no functionality in any key.

  I can't find software for Lenovo Enhanced experience in the part of the drivers/software from the support site.

  Please help with this. Everything is resolved with this new facility except for this.

  
  

• global variable functional to read and write data from and to the parallel loops

  Hello!

  Here is the following situation: I have 3 parallel while loops. I have the fire at the same time. The first loop reads the data from GPIB instruments. Second readers PID powered analog output card (software waveform static timed, cc. Update 3 seconds interval) with DAQmx features. The third argument stores the data in the case of certain conditions to the PDM file.

  I create a functional global variable (FGV) with write and read options containing the measured data (30 double CC in cluster). So when I get a new reading of the GPIB loop, I put the new values in the FGV.

  In parallel loops, I read the FGV when necessary. I know that, I just create a race condition, because when one of the loops reads or writes data in the FGV, no other loops can access, while they hold their race until the loop of winner completed his reading or writing on it.

  In my case, it is not a problem of losing data measured, and also a few short drapes in some loops are okey. (data measured, including the temperature values, used in the loop of PID and the loop to save file, the system also has constants for a significant period, is not a problem if the PID loop reads sometimes on values previous to the FGV in case if he won the race)

  What is a "barbarian way" to make such a code? (later, I want to give a good GUI to my code, so probably I would have to use some sort of event management,...)

  If you recommend something more elegant, please give me some links where I can learn more.

  I started to read and learn to try to expand my little knowledge in LabView, but to me, it seems I can find examples really pro and documents (http://expressionflow.com/2007/10/01/labview-queued-state-machine-architecture/ , http://forums.ni.com/t5/LabVIEW/Community-Nugget-2009-03-13-An-Event-based-messageing-framework/m-p/... ) and really simple, but not in the "middle range". This forum and other sources of NEITHER are really good, but I want to swim in a huge "info-ocean", without guidance...

  I'm after course 1 Core and Core 2, do you know that some free educational material that is based on these? (to say something 'intermediary'...)

  Thank you very much!

  I would use queues instead of a FGV in this particular case.

  A driving force that would provide a signal saying that the data is ready, you can change your FGV readme...  And maybe have an array of clusters to hold values more waiting to be read, etc...  Things get complicated...

  A queue however will do nicely.  You may have an understanding of producer/consumer.  You will need to do maybe not this 3rd loop.  If install you a state machine, which has (among other States): wait for the data (that is where the queue is read), writing to a file, disk PID.

  Your state of inactivity would be the "waiting for data".

  The PID is dependent on the data?  Otherwise it must operate its own, and Yes, you may have a loop for it.  Should run at a different rate from the loop reading data, you may have a different queue or other means for transmitting data to this loop.

  Another tip would be to define the State of PID as the default state and check for new data at regular intervals, thus reducing to 2 loops (producer / consumer).  The new data would be shared on the wires using a shift register.

  There are many tricks.  However, I would not recommend using a basic FGV as your solution.  An Action Engine, would be okay if it includes a mechanism to flag what data has been read (ie index, etc) or once the data has been read, it is deleted from the AE. 
  
  
  There are many ways to implement a solution, you just have to pick the right one that will avoid loosing data.
  

• Error message: "unable to connect to the RPC Server" and no internet connection.

  Original title: recently installed a program of pc cleaner. Seemed to really speed up my laptop that is running Windows XP.

  After two days I try to connect to the internet and no connection lie. Uninstalled the pc cleaner without problem but the problem continues to exist. All tests, etc., result in "unable to connect to the RPC server. Slide short drive and reinstall XP, are there any other things to try?

  Hi Wantamustang,

  You can try the following steps and check.

  You can set the remote procedure (RPC) call Service to start automatically:

  a. clickStart, point to settings, clickControl Paneland then double-clickServices.

  b. in theservices list, click the remote procedure (RPC) call Serviceand then clickStartup.

  c. underStartup Type, click Automaticand then click OK.

  d. restart your computer.

  You can also consult the following article:

  Windows wireless and wired network connection problems

• Problem with the startup and the main functions of Council and the mouse

  When I come home from the office window, I have no function keyboard or mouse. When I press F8 at startup, the computer stops with two selections - either 1) continue with rebooting the system 2) Delete restoration data and proceed to system boot menu. I'm hesitant to try (2) - what gives?   After a few minutes, then the computer goes into hibernation.  Any ideas how to get this resolved?  My system is XP Home Edition OS and I have a Dell Dimension 8100.

  Hi Skan_Bill,

  1. you remember to make changes to the computer?

  I suggest you try the steps from the following links in the article and see if it helps:

  Windows XP stops responding at the Welcome screen

  A computer that is running Windows XP or Windows Server 2003 may stop responding when you select the option "Delete restoration data and proceed to system boot menu.

  I hope this helps.

• To call the function in sql and script call

  Hello

  I'll have a .sql script that returns the name of the partition and I need to run alter table Exchange partition something like this

  get_part. SQL

  COLUMN file_name new_value by sub_script_col

  accept the start_date char prompt arguments ' input start (exact): '

  accept the end_date char prompt "enter end date (exact): '"

  create or replace function get_part_name (p_date in date)

  VARCHAR2 is back

  date d;

  RETP varchar2 (30);

  spirit date: = to_date('4444-01-01','yyyy-mm-dd');

  Str varchar2 (32000);

  cursor c is

  Select high_value, nom_partition p

  of all_tab_partitions

  where table_name = 'TO_TEHBLNC ';

  Start

  for r in c loop

  Str: = r.high_value;

  run immediately 'select'. Str |' double ' in d;

  If p_date < d and d, then the spirit

  RETP: = r.p;

  spirit: = d;

  end if;

  end loop;

  return pter;

  end;

  Select get_part_name ('& 1') twice;

  ACCEPT user_yn PROMPT ' do you want to partion with < partition name > table? (Y, N) : "

  SELECT THE CHECK BOX

  WHEN TOP (LTRIM (' & user_yn')) AS 'y %. "

  THEN "insert_partition".

  ELSE 'do_nothing.

  END AS sub_script_col

  DOUBLE;

  @ &sub_script_col < partition_name >

  sub_script_col. SQL

  ALTER TABLE to_tehblnc

  SWAP PARTITION < name patition >

  WITH TABLE T1

  WITHOUT VALIDATION

  UPDATE GLOBAL INDEXES;

  I need to call once again for the sub_script.sql based on start_date and end_date, for example 1st January 2015 and January 5, 2015 I must first get the parition name and proceed to modify the table with that respective partition name returned by the function, so that it will be 5 times alter the table to swap partition

  I'll have a .sql script that returns the name of the partition and I need to run alter table Exchange partition

  This is just a continuation of your other thread

  For the name of the partition in the partition range table

  As I said it you do not have to know the name of the partition to make an EXCHANGE. I gave you an example in this other thread.

  ACCEPT user_yn PROMPT ' do you want the table to partition with ? (Y, N) : "

  That makes no sense at all. You cannot partition a table that is already partitioned. If there is a name for the partition and then the table is partitioned already - then ask why to partition?

  ALTER TABLE to_tehblnc

  SWAP PARTITION

  WITH TABLE T1

  WITHOUT VALIDATION

  UPDATE GLOBAL INDEXES;

  I need to call once again for the sub_script.sql based on start_date and end_date, for example 1st January 2015 and January 5, 2015 I must first get the parition name and proceed to modify the table with that respective partition name returned by the function, so that it will be 5 times alter the table to swap partition

  No - you don't have. Just use the code example I provided in your other thread. You don't need to know the name of the partition and use dynamic sql statements to make the Exchange.

  Just use PARTITION syntax as shown in the example.

  Do things the EASY way. Your code and the script is totally useless.