W/Vista I do not find, install and configure the HP PSC 1200 series like on Windows XP utilities

On my HP Windows Vista laptop I can not install the corresponding HP, printing, copying and scanning utility as on Windows XP.

The Vista Gallery program supports the scan function. What seems absent, it's diagnosis and maintenance, such as the ability to calibrate the connected (via USB) HP PSC 1205.

I receive comments and help,

Mel

HI Mel,

The PSC 1200 supported by the basic features of driver that with any what neewer of Windows XP operating system.

Below you can what functionality is available and the limitations of the software as well:

http://support.HP.com/us-en/document/c00808543

Kind regards

Shlomi

Tags: HP Printers

Similar Questions

  • How to install and configure the virtual machine with XP as an operating system on a Machine running Vista

    How to install and configure the virtual machine and XP operating system inside, with vista as my work machine.

    * original title - how to install and configure the computer virtual and XP operating system inside, with vista as my work machine.*

    How to install and configure the virtual machine and XP operating system inside, with vista as my work machine.

    Hey Preethi23

    It comes to the installation of vista operating system instance

    read the links below

    http://www.Microsoft.com/Windows/Virtual-PC/support/Virtual-PC-2007.aspx

    http://www.Microsoft.com/Windows/Virtual-PC/support/FAQ.aspx

    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=04d26402-3199-48A3-afa2-2dc0b40a73b6&displaylang=en

    Walter, the time zone traveller

  • doubt Doc ID 1618305.1 how to install and configure the user interface for content with WebCenter content 11.1.1.8.0

    doubt Doc-ID 1618305.1 How to install and configure the user interface with WebCenter content 11.1.1.8.0 content

    The portal_domain field contains;

    AdminServer (admin) and Enterprise Manager, (port 7001)

    IBR_server1, (port 16250)

    UCM_server1, (port 16200)

    WC_Spaces1, (port 8888).

    On the same machine, I have another weblogic, admin and for the ITS.

    The case is that continued to develop for the upgrade to the new skin WebCenter content.

    That's my goal.

    Then I did some research and came to the following notes in support.

    1 - how to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1()

    https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=290841671406625 & ID = 1618305.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_216

    and

    2 - update of the 11.1.1.8.0 UI content after you apply the Patch of Bundle WebCenter content 3 (MLR 3) or higher (Doc ID 1617477.1()

    https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=291485823387355 & ID = 1617477.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_245

    The UCM_server1 has the following House / app / oracle / Middleware / Oracle_ECM1 /.

    And the list of patches;

    ===================================================================================================

    Installed products of higher level (1):

    Oracle WebCenter content management install 11.1.1.8.0

    There are 1 products in this House of Oracle.

    Installed products (40):

    Cloning of the 11g Application Server 11.1.1.8.0 component

    Enterprise Manager Application Server Integrator Plugin - Management Service Support11.1.1.7.0

    FMW Control Plugin for Oracle inbound refinery 11.1.1.8.0

    FMW Control Plugin for Oracle WebCenter Capture 11.1.1.8.0

    Component install SDK 11.1.0.9.0

    Oracle Application Server Configuration 11.1.1.7.0

    Part of Oracle 11.1.1.7.0 Bali

    Oracle 11.1.1.8.0 capture

    Common files Oracle WebCenter content management 11.1.1.8.0

    Oracle Content Server 11.1.1.8.0

    Content of Oracle 11.1.1.8.0 Server component

    Content access Content Server Oracle 11.1.1.8.0

    Access to the contents of the Oracle Content Server 11.1.1.8.0 files

    Oracle Content Server Core 11.1.1.8.0

    Oracle 11.1.1.8.0 server content distribution

    Oracle extended Windowing Toolkit 11.1.1.7.0

    Oracle Fusion Middleware Admin Config 11.1.1.6.0

    Oracle Help for Java 11.1.1.7.0

    Oracle Help for the Web - UIX 11.1.1.7.0

    Oracle Help for the Web Shared Library 11.1.1.7.0

    Oracle Help share library 11.1.1.7.0

    Ice browser Oracle 11.1.1.7.0

    Oracle IRM                                                           11.1.1.6.0

    Oracle extended JFC Windowing Toolkit 11.1.1.7.0

    One-time correction of Oracle 11.1.0.9.9 installer

    Oracle outside in technology 8.4.0.0.0

    Oracle Remote Client of Intradoc 11.1.1.8.0

    Component of Oracle 11.1.1.7.0 rules

    Oracle SOA 11.1.1.7.0 workflow

    Universal Oracle install 11.1.0.9.0

    Oracle Upgrade Wizard 11.1.1.8.0

    Oracle Upgrade Wizard 11.1.1.8.0

    Upgrade Oracle WebCenter content management 11.1.1.8.0 Assistant

    Oracle WebCenter Capture 11.1.1.8.0

    Oracle Webcenter content - rights 11.1.1.7.0 documentalist

    Oracle WebCenter content - Universal Content Manager 11.1.1.8.0

    Oracle WebCenter content management install 11.1.1.8.0

    Oracle WebCenter content 11.1.1.8.0 management product suite

    Oracle WebCenter content: Imaging 11.1.1.8.0

    OracleAS Documentation 11.1.1.8.0

    There are 40 products installed in this House of Oracle.

    Interim plates (2):

    Patch 18188143: applied the sea Mar 19 17:37:32 BRT 2014

    Patch ID: 17263162

    Created February 5, 2014, 12:56:41 pm

    Bugs fixed:

    15872313, 17184457, 17515691, 16633496, 14317920, 15991141, 16892410

    14071471, 17929776, 13414481, 16042293, 17018964, 17627211, 16768600

    16037162, 14521663, 17768056, 14738077, 16460053, 17567819, 17806416

    15905591, 16080297, 17569908, 17043756, 18139768, 17211093, 17805499

    16418434, 16828356, 16671687, 17039391, 16698130, 17943394, 17632731

    17560900, 14246603, 15941347, 16045712

    Location of patch in the inventory:

    / app/Oracle/middleware/Oracle_ECM1/Inventory/oneoffs/18188143

    Patch location in the storage area:

    /app/Oracle/middleware/Oracle_ECM1/.patch_storage/18188143_Feb_5_2014_12_56_41

    Patch 18088049: applied the sea Mar 19 17:35:58 BRT 2014

    Patch ID: 17182855

    Created February 16, 2014 20:35:48 hrs PST8PDT

    Bugs fixed:

    17919101, 17894065, 17884570, 17883868, 17883112, 17854549, 17835742

    17832305, 17819213, 17812338, 17789722, 17783376, 17778867, 17761746

    17740542, 17733871, 17698852, 17658821, 17642431, 17636186, 17622384

    17616664, 17616611, 17616489, 17613656, 17608703, 17589960, 17581458

    17574153, 17567413, 17565564, 17558210, 17558068, 17546505, 17545841

    17540480, 17528590, 17514070, 17511368, 17511271, 17511089, 17501678

    17500375, 17475733, 17449617, 17421368, 17417817, 17416821, 17416807

    17416771, 17416377, 17416343, 17402732, 17401071, 17401052, 17397875

    17393920, 17393892, 17369286, 17368525, 17368096, 17362858, 17362130

    17354877, 17353764, 17352746, 17335303, 17335290, 17330493, 17324707

    17323595, 17323038, 17317268, 17314494, 17313064, 17313052, 17313000

    17312990, 17312933, 17312863, 17312366, 17298386, 17295962, 17290804

    17285105, 17270986, 17261952, 17255019, 17219134, 17216119, 17206903

    17201035, 17200854, 17199763, 17187804, 17185539, 17171852, 17171818

    17164502, 17160600, 17153780, 17074852, 17050451, 17049175, 17026301

    17008220, 17007746, 17007534, 17006378, 16999307, 16999291, 16991380

    16980256, 16980207, 16980196, 16979042, 16961904, 16958142, 16954858

    16941623, 16936055, 16936048, 16936036, 16936020, 16936006, 16935987

    16935976, 16921682, 16908287, 16858148, 16815976, 16796213, 13931337

    17424037, 17006115, 17171834

    OPatch succeeded.

    ==============================================================================================

    And contains the following configurations in config.cfg

    ==============================================================================================

    SocketAddressHostSecurityFilter = 127.0.0.1 | 0:0:0:0:0:0:0:1 | 192.168.1. * | 10.62.1.79

    xPortalSecurityPropagate = true

    Web server = javaAppServer

    AllowUpdateForGenwww = 1

    SearchIndexerEngineName = OracleTextSearch

    IndexerDatabaseProviderName = SystemDatabase

    AdditionalEscapeChars = -: #.

    FileEncoding = UTF8

    MaxQueryRows = 2000

    DisableAuthorizationTokenCheck = true

    IntradocServerPort = 4444

    SchemaPublishInterval = 604800

    SSAllowDelayedProjectWrites = true

    IdcServerThreadQueryTimeout = 120

    DisableQueryTimeoutSupport = false

    MaxSearchConnections = 20

    #Cache

    UseSearchCache = false

    #

    #AdditionalEscapeChars = _: #, -: {-}, has: A, GOLD: GOLD, CAN: CAN, AND: AND at the END:

    # Accesing a content item on a mapped Web URL (WebUrlMap) fails with the error: "unable to retrieve the content. Security access denied» (Doc ID 1639028.1()

    MaxAccountsInSecurityClause = 300

    # end (Doc ID 1639028.1()

    #Search fails for external users in WCC after upgrade to 11.1.1.8.0 (Doc ID 1676468.1()

    DoCaseInsensitiveAcctSearch = false

    # end (Doc ID 1676468.1()

    #MigrationFormatForfApplicationGUID = dCollectionName:dCollectionGUID

    ==============================================================================================

    To my UCM_Server1 content WebCenter.

    As I already have a WebCenter content I have to follow the second part of the note

    How to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1).

    Install and configure content WebCenter ADF WebUI against WebCenter Content Server

    Step 1) install the MDS schema

    (Step 2), install the Weblogic Server

    11 GR 1 material step 3) DOWNLOAD and install Oracle Application Development Framework (11.1.1.6.0) in the new WebUI WLS Middleware House, found here

    Step 4) Download and apply Patch 16, 546 129.

    Step 5) Download and apply Patch 16, 546 157.

    Step 6) download and apply the Patch and then 19,469,801, 18,102,108 Patch

    Step 7) copy the wccadf files in the field of user interface

    Step 8) Oracle on demand services (MDS) metadata registry

    Step 9) Place the WebCenter content domain user interface model

    Step 10) run the Setup Wizard on the new home of Middleware WebUI to create the new domain

    Step 11) updated the Oracle ADF of shared libraries

    Step 12) start the domain WebUI administration server

    Step 13) Save target Managed Server with the MDS repository and create the metadata partition

    Step 14) start the server managed WebUI.

    Step 15) associate UI WebCenter content to Content Server.

    Step 16) reboot the WebUI ADF server managed.

    Step 17 access the WebUI

    Step 18) complete the Configuration of the workflow

    Step 19) apply the latest Patch Bundle content UI of WebCenter

    MY DOUBT IS:

    To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

    I have two servers weblogic?

    portal_domain (explained above) and a new wccui_domain wls and domain.

    This fix it?

    Two WLS to keep WebCenter portal and content, and other elements.

    Because I'm not able to do with the WLS even where I UCM_server1 today?

    Thanks for all suggestions and criticism.

    To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

    I have two servers weblogic?

    portal_domain (explained above) and a new wccui_domain wls and domain.

    This fix it?

    Two WLS to keep WebCenter portal and content, and other elements.

    Because I could not do with the WLS even where I UCM_server1 today?

    Yes, up to 11.1.1.9.0, you will need to install a new wls House (new wls server admin) and then configure WCC ui there. User interface and COE will not work in the same field. You can have the portal and content under the same House of wls and install a new one for the user interface.

    This is due to a problem with ADF and WCC libraries.

    With 12 c, this dependence is not there, and you can install / configure all 3 (Portal, content and adf ui) applications on the same domain.

  • What computer privileges must install and apply the updates for Creative Apps clouds using Windows 7?

    What computer privileges are required to install and apply the updates for Creative Apps clouds using Windows 7?

    When you work for a company that controls the software installed on your computer, it is important to know if IT supports is necessary to install and apply the updates when updates are available.

    It is important to know this information before you buy.

    Thank you for your support.

    ~ Paul Miller

    admin command is required for installation or any changes made to the software from your computer.

  • What role must be installed and configured the server MRS

    Hi friends,

    What is the role for the domain user account Windows is needed to install and configure the server MRS?

    Should the area of employment must be the local administrator of Vcenter serere?

    Thank you

    Hello

    According to the MIS Program administration guide, you must be administrator to install SRM.

    In addition, my experience on Windows 2008 R2, you must click on the installer and choose "Run as Administrator", otherwise intallation process will be blocked.

    Michael.

  • Install and configure the Apache HTTP server plug-in

    Hello

    I use WL10.3 in a Linux machine.

    I have an environment where I have one WL server in a domain which is deployed with the web application

    And I have another area where I have two managed servers in a cluster that is deployed with the company.

    Now, I want to configure Apache HTTP server to make it work as a proxy with the weblogic.

    In my current scenario, the proxies of one seed server req in the cluster and that is defined in a jndi.properties.

    Now, what should I do if I want to use the Apache

    I have the following questions:

    1 forget my env, generally how to install and configure Apache HTTP plugin?
    I see that we have already seen libproxy_61.so file in /bea/wlserver_10.3/server/plugin/linux/i686

    Do I need to install the patch even then as said in http://www.oracle.com/technology/deploy/security/wls-security/2793.html?

    2. While am adding the lines in the httpd.conf file.
    LoadModule modules/mod_wl_22.so weblogic_module

    If I put ibproxy_61.so instead of mod_wl_22.so in this line?

    3. While configuring the proxy server, balancing and session replication will be assured?

    4. and for my setup, as stated at the beginning, a few lines, which may be the best architecture?

    Your help is really appreciated.

    Hi Subh
    1 so all external requests go to the single domain server with MoreWeb app. In this scenario, you don't need any additional Proxy Apache server. Because the basic concept of the Apache Web server is to route multiple applications on a cluster of managed servers. In your case, it is a single server, you don't need any additional Web front server. Now you have these EJB on another area that is clustered. I guess you use search standard JNDI to access the EJB. So, how do you make sure that only MoreWeb app requests are load balanced to the EJB. As each subsidiary request for EJB must go to MS1 and MS2 as robin in default mode. First request to MoreWeb need access EJB of MS1. Second request for MoreWeb need access EJB MS2 etc. This means in theory, you should have an Apache Web Server before the second area something like that. You have any servlet default weblogic cluster already deployed to the second area. Otherwise use that or care of apache in etc. Then in MoreWeb App when you search the EJB, make sure that you give the address Cluster and the direct port instead of the host/port MS1 or MS2. This Web server should in turn make the round robin for EJB on second domain clustered. When you get the InitialContext object instead of using empty default constructor as new InitalContext(), you may need to use something like InitalContext (aMap) new aMap corresponding to a hash table with the properties for the provider url, etc. etc. You can see the docs for more details. Here is the link for the EJB Clustering. See the section on EJB

    http://download.Oracle.com/docs/CD/E12840_01/WLS/docs103//cluster/load_balancing.html

    Hope this helps
    Ravi Jegga

  • Do not know if Hugepages installed and configured the right to the CCR 11.2.0.2

    OS: redhat linux 5

    DB: 11.2.0.2

    Cluster: 11.2.0.4

    I hugepages SA helped, and it seems that a little weird for me the message in the alerts log:

    Starting ORACLE instance (normal)

    Huge information Pages *.

    Huge pool of detected memory Pages (total: 21508 free: 21220)

    Allocation of LTVDS Pages huge success (allocated: 20481)

    ***********************************************************

    However, in 11.2.0.3 environment, I saw these formulations in the alerts log that seems normal to me:

    Starting ORACLE instance (normal)

    Large information Pages *.

    Total shared global area in large Pages = 0 KB (0%)

    Large Pages used by this instance: 0 (0 KB)

    Large wide Pages unused system = 0 (0 KB) (alloc incr 128 MB)

    Large Pages configured wide system = 0 (0 KB)

    The Page Size = 2048 KB

    RECOMMENDATION:

    Total size of the shared Global area is 40 GB. For optimal performance,

    before next restart of the instance, to increase the number

    big unused Pages by atleast 20481 2048 KB large Pages (40 GB)

    scale to get 100% of the Shared System

    Global area allocated by using large pages

    ***********************************************************

    I would really appreciate any entry here. The hugepages is configured right?

    OK, this shows that huge Pages are configured and valid. I guess it's the first system with the 11.2.0.2 database.

    A little back to the original question.

    Starting ORACLE instance (normal)

    Huge information Pages *.

    Huge pool of detected memory Pages (total: 21508 free: 21220)

    Allocation of LTVDS Pages huge success (allocated: 20481)

    ***********************************************************

    This above is normal when the huge Pages are used by the instance.

    This is what you see, when the huge Pages are not configured at the level of the BONE (your 11.2.0.3 environment):

    Starting ORACLE instance (normal)

    Large information Pages *.

    Total shared global area in large Pages = 0 KB (0%)

    Large Pages used by this instance: 0 (0 KB)

    Large wide Pages unused system = 0 (0 KB) (alloc incr 128 MB)

    Large Pages configured wide system = 0 (0 KB)

    The Page Size = 2048 KB

    In fact, if huge Pages have been set up at the level of the BONE, even if the instance has been said to not use them, he would still list the number of pages at the start, like this:

    Large information Pages *.

    Setting use_large_pages = FALSE

    Large pages unused system wide = 10000 (20000 MB)

    Large pages configured system wide = 10000 (20000 MB)

    The large page size = 2048 KB

    Note that the message has changed in 11.2.0.3 and later versions.

  • Steps to install and configure Node Manager on the local machine and remote

    Hello

    I'm using WLS 10.3 on Windows.
    I did the following till now.

    (1) installed WebLogic 10.3 on one machine (local computer, on which I created the field and my Server Admin is under execution. 1 managed server is also created on this machine).
    (2) installed WebLogic 10.3 on computer B (remote computer, which Managed Server 2 will be created).
    (3) on the machine, I used the Setup Wizard and create a domain. When creating the domain, I did the following:
    (i) created two managed servers.
    (II) create a cluster
    (III) the servers assigned to regroup.
    (IV) created two machines.
    (v) the servers assigned to machines (Admin Server and MS_1 to the machine and MS_2 machine B).

    (4) start Admin Server.
    (5) on the administration Console, I made some configurations for the node Manager on Machines-> Machine A-> Node Manager. The assigned values:
    (i) type (SSL)
    (II) Address (ip_address machine A) listen
    (III) listening port (5556)
    (6) in the same way it did for Machine B.

    So far, phsically the managed server (MS_2) directory and configuration is not there on the Machine B (its only configured on A computer because I created the field on computer A).

    I went through the documents on the Node Manager and found what to configure. But I have not found what is the sequence of configuration.

    Please let me know the sequence of steps I must follow to install and configure the Manager of nodes on the local and remote machine. I want to use Java Node Manager (not the Script node Manager).

    Thank you

    Sanjay

    Hello Sanjay

    Basically if I understand your question, you have A machine where you had installed ""(permet de supposer admin serveur) and "VAS_MS1_A VAS_ADM_A" (lets assume the managed server.» And on the second machine B you want to create a managed server 'VAS_MS2_B' which must be controlled by node manager, so that you can start console, auto restart the managed server and perform other activities such as the migration of servers using nodemanager. If this is correct, this is the sequence of steps.

    Since you say you are on windows, I start from the principle

    WebLogic version 10'3
    BEA_HOME:-c:\bea
    WL_HOME:-C:\bea\wlserver_10.3
    DOMAIN_DIR:-c:\VASDomains

    Machine has

    (1) install the BEA.
    Using 2 Setup Wizard) create the domain under "c:\VASDomains".
    (3) to start the Admin Server and connect to the console and create two machines "Machine_A" and "Machine_B". Select the types of machines as 'other '.
    (4) once machines are created go to each machine and go to the tab 'NodeManager' and enter the details nodemanager.
    (5) create server 'VAS_MS1_A' and 'VAS_MS2_B '. Enter the respective details. To "VAS_MS1_A", enter a machine name of host or ip and machine "Machine_A" and "VAS_MS2_B", enter the hostname of the machine B or ip and machine 'Machine_B '.

    Machine B

    (1) on this machine install BEA
    (2) then you have to register the machine with the Manager of nodes. So for this first set the environment go to "C:\bea\wlserver_10.3\server\bin" and run "setWLSEnv.cmd". Then type 'java weblogic. Enter the WLST", once you run this command at the next prompt Details ' connect ('', 'adminserverpassword','t3: / / adminserver:port" ")
    (3) then run this command.
    nmEnroll('c:/VASDomains','C:\bea\wlserver_10.3\common\nodemanager')

    Orders above fits machine with nodemanager. The first parameter is "domestic field", now if you see "c:\". ' directory 'VASDomains' will be created. Second parameter is nodemanager House, now if you go into nodemanager houses that some properties will be updated.
    (4) If this node Manager runs on this computer, kill that one and restart the node Manager again.
    (5) now if you go to "Adminconsole--> Machines--> Machine_B--> Monitoring" you can see the status as accessible.
    (6) now you can go "Servers--> VAS_MS2_B--> Control" and start the server. Newspapers to see how the server gets up the tail.

    If you want more details on "nodemanager", dedicated to my 'vasweblogic.blogspot.com' blog, not a lot of messages but post nodemanager can help you.

    I hope that's what you're looking for, have a nice day.

    Naour Vijay.

  • I need to re - install windows vista but can not find my disk

    Gave up my old hard drive to the laptop and I need Windows vista but can not find my disc can I download it for free if so microsoft where any help would be great

    Thank you very much, Nik

    Hello

    There is no Windows Vista downloads available from Microsoft.

    Contact the manufacturer of your laptop and ask them to send a set of recovery disks.

    They should do this for a small fee.

    "How to replace Microsoft software or hardware, order service packs and replace product manuals.

    http://support.Microsoft.com/kb/326246

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    See you soon

  • After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

    Wireless card not working after a clean install of Windows Vista

    I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

    I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

    I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

    I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

    In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

    Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

    Hello

    The on/off switch actually works?

    Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
    Start - so look at the screen.

    Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
    Re-install of Vista?

    ---------------------------------------------------------------------------------------------------------------------

    Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
    Update your WiFi drivers on computers. How you are positioned in the router? Are there
    obstacles in the path?

    Actually try updating your driver and disabling the network logon.

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
    version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
    Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
    manufacturer of system become your backup policies).

    Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
    updated drivers.

    I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
    are almost always old, and you can search drivers manually as needed.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ------------------------------------------------------

    Make sure you know the details of connection to your wireless router - SSID and password.

    You lose connection when you do and have to redo your logon.

    Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
    lower left click on merge or delete network locations - REMOVE all instances of your network (and the
    others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

    -----------------------------------------------------

    Check this box:

    Strange problem with Internet under Vista
    http://www.catonett.com/blog/archives/194

    Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
    http://support.Microsoft.com/kb/928233/en-us

    ----------------------------------------------------

    And:

    Network connection problems
    http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • I bought a "Windows Vista SP1 Upgrade disc" Wal-Mart and on the accident. I thought it was a full version, but turned out to be upgraded. How can I install this drive to upgrade on my computer if I do not already have an existing operating system?

    I bought a "Windows Vista SP1 Upgrade disc" Wal-Mart and on the accident. I thought it was a full version, but turned out to be upgraded. How can I install this drive to upgrade on my computer if I do not already have an existing operating system?

    You need a disk FULL/license to do a clean install, not an upgrade license.

    Take it back to Wal-Mart and see if you can exchange it.

    See you soon. Mick Murphy - Microsoft partner

  • Try to install and give the message that it does not support the BONES - and it says unsupported windows vista and we have windows 7

    Try to install and give the message that it does not support the BONES - and it says unsupported windows vista and we have windows 7

    Try to force the lightroom Installer to run in Windows 7 mode:

    Right-click on the Setup file and select Properties option.

    Then click on the Compatibility tab.

    The value of the Windows 7 operating system and check.

  • my computer does not have an installed and configured wireless network adapter

    I just installed a new hard drive on my computer of dell inspiron 1525. I am not very computer but I managed to do it and it works. I had a disc from dell to reinstall windows vista edition Home premium 32-bit and had drivers and utilities dvd. However, I can't connect to the internet. He always tells me that I have not installed and configured wireless network card. When I go into computer management, there is no network adapter. There are "other devices" which device base system list three times with properties that say that the drivers for this device are not installed (code 28) but it won't let you not reinstall drivers and to be honest, I don't even know what the "other devices". There is also an ethernet controller that says the same thing. A network controller and the properties say he has not configured corr. (code 1) but won allow you to install because windows cannot find the driver for the device. He says that if you know the FAB of the device, you can visit the site Web-manufacturer of this device? As you can see, I'm not very computer. So, how can I connect to the internet. I have Verizon wireless at home. Thank you.

    well, I think that I thought about it. I right click on each of them separately, and I think I can have it now.

    Thank you

  • Wireless network adapter is not installed and configured

    I have recently re installed windows vista for my laptop dell inspiron 1545. I am not able to connect to wireless internet, it says that the wireless network adapter is not installed and configured. How do I install it and where can I get the wireless network adapter. I have a cd or anything for it. Thank you

    You can get in trouble with your device drivers, firmware and/or software.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you shouldget from Dell for the wireless adapter at all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html. > http://support.microsoft.com/kb/244617.

    The adapter is inside the laptop.  You don't need to do something with it to install it.  Install the drivers, firmware or software for it and your version of Vista from Dell (all that apply) "install".  You must then go to start / Control Panel / Network and sharing Center and configure the adapter with the appropriate parameters and to establish the appropriate network connections.  This will take place in settings required by your ISP, and maybe your router or modem (so you may need to contact them if you don't know the settings).

    Here are the procedures for Vista with Windows7 network layout that can help:http://www.windowsnetworking.com/articles_tutorials/Windows-7-Understanding-Network-Administration-Configuration.html.

    Here is another article on home networks (with several links to related articles which must all be considered - as well as others, you will find in the related articles) to help you better understand the home networks: http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.  If it's for Vista, much of it applies to Windows7 (although there may be some differences that should be addressed in the previous article).

    Here is an article on the networking of the different versions of Windows:http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows.

    Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

    Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

    Here's a long guide on wireless internet connections in Vista:http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.

    Here is an article on how to set up wireless internet in Vista:http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf.

    As I am unsure of your Setup, I've included several items that can help depending on how you are setup.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • 'This computer does not have an adapter installed and configured wireless' error

    Hello

    Until recently I used a USB 3 G of Orange to connect to the internet. However, I just moved into an apartment where there is wireless via a router and I cannot pick up wireless. When I go to 'Connect To' I got the error message: "this computer has an adapter wireless installed and configured. I tried various methods to solve this problem based on other topics of the forum, but nothing seems to work.

    I am running Windows Vista Home Premium Service Pack 1.

    Any help will be greatly appreciated :)

    Thank you very much

    Adam

    Go to the device under network adapters Manager see if your wireless network does not work properly or activated, usually a peripheral disorder has a yellow exclamation point in front of her.

    Also check your switch wireless if his, mine has a blue light when it is on and red when off.

    I hope I could help

Maybe you are looking for

  • Replace Satellite C850 cooling fan

    Hi everyone, noob here needing help. I dropped my C850 1 kN (very stupid, I know) and now I think the cooling fan is broken. I removed all the screws from the underside of the laptop and removed the hard drive. Still, the case seems closed and I can'

  • [Pavilion g6 Win7 64 bit] SM Bus controller and drivers Touchpad

    Hello, after scouring the forum I managed to find my drivers but for the SM Bus controller. This is the ID of the hardware for the SM Bus controller: PCI\VEN_1022 & DEV_780B & SUBSYS_1849103C & REV_14 PCI\VEN_1022 & DEV_780B & SUBSYS_1849103CPCI\VEN_

  • Range of RV-130 DSL is reset to the default values

    I bought a router of RV-130 a few weeks ago and installed in my network. I have it configured with a 192.168.100.x LAN IP address range. For some reason, every 8-10 days, he decided to return itself to the 10.10.10.x LAN range that completely breaks

  • Cannot save preferences Animate CC 2015.2 and 2015.3

    After changing the color of the interface in the preferences, it is not be saved. The color of the interface changes immediately, but after the closing, preferences, the color gets switched back from light to dark. I tried the same thing with sync ac

  • need to insert a node before a node without terminals in a variable

    HelloI have a script something like this, I have a variable x that contains an xml underneath, where the un_node1 and the un_node2 are endless. I want to insert a new node (which is also un_node2) just before the 1st un_node2. basically the new node