w2207 22 '' monitor: w2207h screen is empty

I have (2) w2207h monitors, now one of them light up for a few seconds, then turns off.  If I turn it works, he'll be back, then right do walk back after a few seconds.  Even if it is enabled, the screen looks good.

I rebooted several times (computer and monitor).

I tried with the standard cable, as well as with an HDMI cable with the same result.

I tried this on 2 different computers, a brand new, with the same result.

I tried as a single monitor only and as one of the 2 monitors, with the same result.

Any suggestions?

Thank you

Hello @DBarker58,

Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

I read your post on how your monitor turn off a few seconds after you power turn it on and I would be happy to help you in this case!

I provided you with a few steps, you can try below:

Step 1. Unplug the power cord at the back of the screen and the wall
Step 2. Press and hold the power button for at least a minute
Step 3. Plug the power cable in the monitor, and then to the wall outlet
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the factory reset option and select
Step 6. Try a different cable to connect your monitor to your computer

If the steps above did not resolve your issue, you can try the monitor on a computer or other device to see if the problem persists. If the monitor remains off after a few seconds, please contact our technical support for further assistance in this matter by clicking on the link below to get help from your region number.

www.HP.com/contacthp/

I hope this helps!

Concerning

Tags: HP Desktops

Similar Questions

  • I had checked "extend my desktop to this monitor". I have only 1 monitor though. Now the screen is empty. I rebooted the pc in the hope to go in safe mode but the screen remained blank.__How can I go back to single screen? __

    I had checked "extend my desktop to this monitor". I have only 1 monitor though. Now the screen is empty. I rebooted the pc in the hope to go in safe mode but the screen remains blank.
    How can I go back to single screen?

    Hi Bilipino,

    You have more than one display card? Try to connect your monitor to the another card and see if you can get the display.

    Reference: http://www.microsoft.com/windowsxp/using/setup/hwandprograms/monitors.mspx

    I hope this helps...

  • Satellite P30 - 133 - internal screen is empty

    Hello everyone.

    I have a satellite P30-133 with a white screen, everything works fine.

    When I plug it into my computer screen but the laptop screen remains empty, any ideas?

    Thanks in advance. Steve.

    Hello!

    Press FN + F5 to switch between monitors.
    Check if you have the same problem on startup and in the BIOS.

    In the worst cases, you should go to a local ASP. Technicians must check your parts for laptop and trade if it of necessary.

    Good bye

  • HP G42-415DX: in a Setup dual monitor, perhaps armored secondary monitor white screen?

    I have a Setup dual monitor, where the laptop is tied to a 2nd monitor (TV) via HDMI. I mainly use the 2nd monitor. Can I empty the 1st monitor (laptop screen) screen, yet still use the 2nd monitor with lid open to access the keyboard?

    (I noticed with parameters changed in the Panel of Win7, I can close the lid without cutting [sleep, Hibernate or shutdown] computer and had to lower the monitor display 2nd to adapt to the screen.) But to use the keyboard, open the lid of the portable computer, which involved the 1st screen)

    Thank you

    Hi Kalad,

    I think the same as you do sometimes, especially when I watch a movie and you want that it will display on the bigger screen and the simultaneouly have the laptop screen is off.

    As you need to use the keyboard of the laptop and want the second poster only, which suggests to select the "Projector" only option in the pop-up menu by pressing the Fn + F4 key.

    & to come back again having two screens or single screen press Fn Key & F4 on your keyboard and select "Extend" or 'Unplug the projector' options respectively.

    I am an employee of HP.

    Kind regards
    Mundutha

    Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem.

    Click the "Thumbs up" button to the lower right side of my post to say thank you! ***.

  • the preferences screen is empty

    On Firefox for Mac 41.01.1, the preferences screen is empty for most of the tabs: Applications, privacy, security, synchronization and advanced. Research in the preferences and general tabs seem to work normally. I upgraded to 10.11 of the OS, but I have had this problem since the previous version of Firefox at 10.10.

    Hello, you can try to reproduce this behavior when you start firefox in safe mode, once? If not, perhaps an addon intrudes here...

    Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  • I use an IPhone 5. My screen is empty. White color. Calls from if composed of a different number, but cannot respond. What can I do to fix this?

    I use an IPhone 5. My screen is empty. White color. Calls from if composed of a different number, but cannot respond. What can I do to fix this?

    Have you tried to reset the device? Keep holding the home and power buttons at the same time and continue to hold until the Apple appears (compared to 30 seconds - really). If you see the Apple, the reset is progressing and the Slide to Unlock screen will display shortly.

    See you soon,.

    GB

  • Equium A300D - after updating the BIOS screen is empty

    Hi, I did a bios update on my Equium A300D-PSAK2E and its bricks of my laptop! When it restarts after update screen is empty!

    Is there a a sort of way to launch a recovery of bios by pressing certain keys on the power on the image of the bios on a USB?

    Kind regards

    Dan

    Hi Dan,.

    Unfortunately I think that there is nothing you can do if the BIOS update gone wrong... In this case the ROM module must be reflashed to an authorized service because guys have special tools to do this process delicate reflash.

    You can find a list of aspic here:
    http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

  • Re: TV TOSHIBA 26EL800A - TV is on, but the screen remains empty

    Hi all

    I have a Toshiba TV 26EL800A purchased in May of this year. Tried to turn on the TV using the remote control mode standby (red light) to on (green light) that has the remote control - the screen remains empty (as there is no power) and after a few seconds the light changes again red - standby again.

    Tried this using the keys on the TV as well and the same thing (have checked batteries for remote control, checked PowerPoint (my dvd player works the same record 2 and it works) but don't know what else is causing the screen lights?)

    Any suggestions?

    I put t really know if you can find the solution here on the computer systems forum.
    What you can try is to unplug TV, leave for a while and check again.

    If the same thing will happen again and again I recommend to contact your local dealer and ask for help or contact the provider of Toshiba directly.

  • Satellite P100-347 screen is empty

    Hello

    I have the laptop above for about two years, running Windows XP. Recently, and with increasing frequency, the screen is empty. It remains illuminated and the laptop still works, with his work.

    I have eliminated I thought initially cause overheating. He responded to be switched off and left for a while. But now he does after being down for about 30 minutes. Does not appear to be linked to any particular process that I can identify. None of the new programs installed. Run all my virus protection and it seems clear there.

    Any ideas?

    Shost

    Hmm maybe there something wrong with the graphics chip?
    Have you tried to update the graphics driver from the Toshiba page?
    You use the latest version of the BIOS for this model of laptop computer?

    Please check these two updates and check if the parts are updated!

    Sorry for this universal advice, but these are strange and it s still very difficult to say what might cause such problems

    Good luck

  • Satellite A300-08W: sometimes screen is empty

    Hello world.

    I'm sure it's a model 08W, he the PM45 chipset and intel processor T9400 and Toshiba support person said it was a model 08W although there do not know the full details of it.

    Problem is every time (not all the time), I let the PC, sometimes the screen turns off (almost black, just lighter I think) and seems to be in standby mode, and it is located in power options advanced when the PC is plugged in which it is, but when I click on the mouse or any other button on the PC the screen remains empty. Nothing happens. A voice began to speak when I hit a button after pressing all the keys, trying to get something to work but does not load windws to its previous state, I shut down the computer manually.

    Happens also when I close the lid on the PC, but when I opened the cover to the top of the screen seems to be black rather than just a minute touch more light than black, as this is when the screen is opened, is the only small difference.

    This computer was once before the PC had bad sectors the HD and HD has been replaced with Vista reloaded but this continues to be. Also I just remembered that some gel applications such as for example, or the other day, my external sound card did not close, seems to be when iam trying to get out of the programs, I can always use other programs or explore other browsers but when the program crashes I can't closed it anyway, either via the Task Manager or by closing the program down throiugh the program itself.

    If I try and shut down the computer through the start bar Windows Vista never stops on its off State, it's just seems to remain at some point through the stop, do not know if there are different points... I have to manually shut down the PC.

    I have windows Vista Home Edition, if you need any other information please let me know, but I think that's all...

    Lee.

    Hello

    > Problem is every time (not all the time), I let the PC, sometimes the screen turns off (almost black, just lighter I think) and seems to be in standby mode, and it is located in power options advanced when the PC is plugged in which it is, but when I click on the mouse or any other button on the PC the screen remains empty. Nothing happens.

    I put t know if you tried to update some parts but I recommend strongly the update the BIOS and the driver display both parties should be placed on the European driver Toshiba and of many such cases, these updates help page

    Check it & good luck!

  • Regulation the screen showing empty in iphone 5 s

    My settings > General > regulatory screen showing empty (check screenshot below) is there someone tell me why it's like that

    It may be a bug or something like that. Try restarting/resetting your phone. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  • Is Tecra A8 - possible to use a Monitor wide screen as the secondary monitor?

    Tecra A8-160 supports a Monitor wide screen (1400:900) as a second monitor? I use the Dualview - not Clone.

    Post edited by: frejlev

    Hello

    The question is what that jack the external display supports?
    I think that you can connect each external monitor, but you must be sure that the laptop will support the cable from the laptop.
    In addition, the resolution of the screen may be different. As far as I can remember that some screen resolutions are not listed in the properties of the graphics card. But I think that you don't need to use the resolution of the screen exactly one.

    I recommend taking the laptop at the dealership to monitor and its connection. You can check the output quality of monitor and what resolutions are available and taken care of. I think that testing before buying something are very useful.

  • Down 3 of my screen is empty

    Hi all

    Down 3 of my screen is empty, so I can't ever see this area of my laptop.
    I managed to drag the taskbar to the top of the office, but by going to some websites I can't fill out forms in due to this part of the screen that empty s.

    All your help as to what I should do would be appreciated.

    Before I'll post advice, I would like to know your laptop model?

  • When the phone wakes up or after a call home screen is empty

    This has happened for a while, but I have yet to see discussed here. When I finish a phone call or wake up my phone or quit an application, the home screen is empty except for my wallpaper. All of my icons, including the row House, will be gone. Sometimes for a few seconds, sometimes it would stay that way until I did a battery pull. I found a way to fight against it, but that gets boring. The way to counter, it is by sliding upward on the screen to bring up the options of 3 profile, which brings usually return to normal. Any ideas? Thanks in advance.

    This looks like some serious lag for me. You can try to install an application cache cleaner and see if things improve. I use the Cache Cleaner by Jova. It seems to work pretty well. Whenever my phone seems to be taking it's sweet time to do the things that I just use Cache Cleaner and the phone speeds up immediately. I hope this helps.

  • I'm trying to re - install windows xp. I get regarding the selection of CD/DVD to install (enter), then I press any (I have not pressed a key any), screen is empty, and that's all.

    My first attempt seemed to work although I don't not re-install all the drivers at this time here.  When I then turned on computer, I got a white screen.  I took advice and tried to install xp again.  I get regarding the selection of CD/DVD to install (enter), then I press any (I have not pressed a key any), screen is empty, and that's all.

    Hello

    It seems that this computer is not able to detect the drive. Use the steps described in the article mentioned below to clean the disk, and then try to install XP.

    How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

    http://support.Microsoft.com/kb/321641

    If you are able to boot to the desktop without inserting the disc, please perform a flat installation.

    How to perform a flat Installation of Flat copy CD to hard drive:
    http://support.Microsoft.com/kb/294727

Maybe you are looking for