W500 battery

Similar Questions

• Windows Lenovo W500 8.1 64-bit DRIVERS

  Hello

  I plan to upgrade my windows 7 ultimate 32 bit to 8.1 Windows 64 bit on my Lenovo w500.

  Let us, I can't find drivers for audio, video, bios, battery, network etc. for my laptop? Can someone please tell

  What will be the update of drivers for this laptop.

  Thank you very much.

  I installed windows 8.1 pro 64-bit and its great performance. Drivers for the wifi, sound, graphics, processor, memory card reader and everything is installed and there is no generic driver in use. Fan control same thinkpad does not work properly

• W500 - 4063 - where's my card ATI HD 3650

  Hello world

  I just got my W500-4063 this week with my school (so it was masterised by school, but not so much).

  It works, first time in my life I see a Vista PC running that works.

  But there is a small 'problem', the ATI HD 3650 M card is not visible. It is visible in safe mode but is disabled. And of course, I get a bad mark the test of Vista (3.8, due to the chart). I checked the bios, the display is on "switchable" but it show that the integrated chipset.

  I'm Workin ' on autoCAD, and it will be a little difficult without the HD 3650. Where can I activate it?

  Thanks for your replies.

  Hello

  Please left click on the battery icon, look down at the illustrious Panel.

  In the lower part is the ability to switch your cards.

• W500 power loss

  I had a W500 WIndows 7 that turns off, usually unexpectedly while you sleep, but sometimes too, so on. Disable it happens as if the power is lost (for example, the battery/cord are torn out). After a turn off like that, I sometimes need to reconnect the battery and the power cord. Doing some reading here and elsewhere on the web and came upon the electrostatic suggestion. Was able to go back at least a few times by touching the underside of the laptop, but it worked erratically.

  Since it occurs especially when the unit is in standby, I pretty much dismissed temperature and software problems.

  Decided to check the spindle of memory section bending solution. My laptop needs to have his palm rest took off to access the RAM modules. People kept on some pins door RAM, but since mine is not a special door of the RAM, I folded the pins at the bottom of the palm rest, and so far, no loss of power, but it is too early to tell.

  Laptop computer BTW is not guaranteed. Any suggestions? What I did is generally useful? Any other reason power loss sudden that I'm missing? (other than a software, heat and electrostatic)

  Thank you!!!

  Do you have a spare battery? I've seen these cause the problem you describe

• Bay battery for W520 (4270CTO)

  Hi all

  I want to buy a battery for my W520 (4270CTO) Bay and noticed that there are just different models of Bay. Is it possible for you to tell me if there are berries compatible battery for my laptop?

  what I see, the only W that supports a battery a battery 3 cells is the W500.

  part numbers: 57Y4536 or 0 has 36310. battery type 42 or 43, respectively.

  Similarly, these batteries are supported in the T500, but not beyond. in the T4xx, beyond the T400 series they appear only as compatible with thes,s T420 and models T410s T430.

  Kind regards.

  Edit: grammar

• Questions about graphics cards in W500

  Hello

  I have a 2HU W500 4061 old but faithful with all drivers up to date. The switchable graphics option is enable in BIOS. The laptop is running windows 7. How to know card wich is being use. I check with application of information material and the integrated Intel card get the list and the FireGL V5700 as well.

  The usefulness of lenovo for the installation of the power supply, I can't find any mention of the map intel. Or in Control Panel. I have ATI CCC running. I would like to see a similar application to install the Intel card, but I can find.

  Help, please.

  I read the following post: http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/How-to-use-switchable-graphics-on-W500/ta-p/34...

  But the option to switchabel isn't there, nor in basic or advanced mode.

  You must install the software Power Manager and all necessary ancillary parts of Lenovo. Then, once you see the battery at the right bottom icon, right click on it and you will have the choice of "Switchable Graphics".

• W500 security issue

  My W500 screen locks after 5 minutes of inactivity and requires a password to unlock. I tried to stop it via the battery settings, but also the security settings, but it keeps any suggestions?

  go to your power setting of standby screen (right click Desktop and then property/display), it is need password on the awakening of setting.

• W500 TPM or Bitlocker question

  Hello - I have a new W500 laptop.

  Win7 64 bit

  8 GB RAM

  300 GB HDD

  Processor 3.06 Ghz Dual Core

  When I restart or turn off the laptop is seems not stopped correctly. It does not restart. The only way I can get it lit again is to hold the button for 10 seconds and it completely off it where I have lights up again. I tried to take out the battery and put it back in but it doesn't seem to solve the problem. I don't know, but this problem may have started after I activated Bit Locker.

  Please advise...

  Thank you

  Note of the moderator; subject to change under the leadership of their relevance

  Problem solved...

  Apply the Microsoft hotfix below and the problem solved :-).

  http://support.Microsoft.com/hotfix/KBHotfix.aspx?kbnum=975496

  GM

• Battery, specifically in the night with ios10

  It happens to me all the time, when the night comes and I don my body with this sweet sleep, it's rough on my iPhone.  Really difficult.  I'll just go on my what happened to my phone last night...

  I went to bed around 01:30, my phone was 93%.  Here is a list of things that together did us before going to bed.

  -Set airplane mode because I get horrible service where I live, and I learned that that saves my battery

  -Closed all my apps

  -Night market

  These are normal things I do every night.  Do not forget that I have the app off background refresh and I have like 3 or 4 things in my widgets.  When I woke up just 6 hours and a half later, my phone had fallen to 59 percent.  Normally when I wake up and work all day and use the phone more (not much, I'm not a heavy user), I have no problem.  It's nighttime in general just when I have these problems.

  I had an iPhone before iOS 10 and 6, I had no problem with my other phone that my * service area, but I use call in wifi and FaceTime to correct this, if my phone is usually at home airplane mode.  Got a new iPhone 7 and who seemed to have no problems for 2 days, but now I'm back for the battery drain of night time making my iPhone 6.

  I doubt that is it because I don't see the problem often, but I think that my router is wrong and sometimes I lose the connection, but when the phone is in standby mode and I don't use it I doubt it would be the problem.  When I go to my use of the battery and check what is using what it says Facebook is 23%, and home and lock screen is only at 2% when it is clearly more 30% has been used yesterday evening.

  Any help would be appreciated, I'm fretting here!

  Facebook app is to drain the battery much. I would rather uninstall. But if you need it, there are a few tips to make energy not so consume: http://www.cultofmac.com/420508/stop-facebook-iphone-battery-drain/

  and also check out this article with advice general http://www.apple.com/batteries/maximizing-performance/

• Contact ID battery fast draining iPhone 5s does not

  5s fast drainage and Touch ID sinice 10.0.2 iOS iPhone battery update does not

  Restarted the iPhone since the update yet?

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

• The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  Depending on what you mean by "voice command", either:

  Settings / general / accessibility / VoiceOver / OFF, or

  Settings / Siri / OFF

  As for your use of the battery, you can check what app pulls most of its use in the settings / battery.  A new version of the app is sometimes problematic, not necessarily iOS or iPhone.  If you see a unusual % of use of a particular application, or force-to leave it removal/reinstalling it or remove it until an update comes.  If anything seems unusual, it might be a problematic installation of iOS, in which case, you could backup your iPhone and restore it:

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

• iOS 10 battery drain

  Does anyone else have trouble with the life of the battery with iOS 10?

  I have a 5 c and I charge my iphone once per day if that.  Now its hollow when I get up morning so I charge it at work and also I have to recharge at night.

  I need this so because its not good for the trip. I'm going to Germany to visit family if I go in Brussels, I know that the airport has charging stations.  God forbid if I go to the United States to visit his family.

  Bluetooth is disabled. WiFi is on.

  is there something I can do? Any advice will be welcome.

  Thanks - danke schön

  Kimla

  First, plug in your iPhone, let the screen off and do nothing for a long period of time. Leave it plugged in all night while you sleep is perfect for that.

  Then, restart your iPhone by pressing and maintaining the sleep/wake and home buttons.

  You can also try following the suggestions of battery life. Go to settings > farm > find 'Suggestions of battery life.

  In addition, it is preferable to follow the Apple recommendations given in this article http://www.apple.com/batteries/maximizing-performance/

• My magic mouse has stopped working.   Is there a battery that I need to replace?

  My magic mouse stop working.   Do I have to replace a battery?  If so, how?

  If it's a Magic Mouse 2 then you reload by using a standard USB cable Flash. The port is at the bottom of the mouse. If it's a Magic Mouse, then you must replace the batteries. Coverage is at the bottom of the mouse.

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Since iOS recent upgrade to my 5s my battery drains too quickly.  How to fix this problem?

  I recently downloaded version 10.0.2 Apple software update on my 5 and the battery drains too quickly.  It never happened until this update.  How to fix this problem?

  Hello kellyfromrexford,

  I understand that you are having a singing of fast draining of the battery you upgraded to iOS 10 on your iPhone 5s.  To determine what application or process affect the life of your battery, take a look at the information in these resources:

  On the use of the battery on your iPhone, iPad and iPod touch

  Maximize the life of the battery and battery life

  Take care.