[W510] crashes during use heavy CPU/GPU | possible overheating

Similar Questions

• Final output rendering: CPU vs CPU + GPU

  Hallo,

  I would use my Nvidia GPU to speed up the rendering of the final output of the projects of Premiere Pro and After Effects to Adobe Media Encoder. Now as far as I know, which allows the GPU acceleration for rendering of the final output in the AMEncoder really accelerating him process significantly. But I have a question about the quality of the production. The addition of acceleration GPU has an influence on the quality of the final result make? I read on some for a comment indicating that only using the CPU for the final rendered result gives results of superior quality, then when using the CPU + GPU acceleration combined? But on some other blogs I actually found that adding statements to process the two GPU speeds up the time required (becomes much faster), and actually increases the quality of the result final render?

  Does anyone know if there is a difference in quality between CPU vs CPU + GPU rendering to final output? I'm working on a 64 bit Windows 7 computer)

  Thanks in advance,

  Sebastiaan

  GPU accelerated export is expected to equal or exceed the software quality in all cases

• iMac restarts after 5 minutes of the heavy load of CPU/GPU and noisy fan

  Hello

  My iMac (late 2012 if I remember) restarts when under heavy load for a while.

  I work a lot with Final Cut Pro X.

  Whenever I have add clips in an event, Final Cut allows you to copy and then transcode and analyze the clips, and this task's CPU/GPU intensive (Final Cut Pro X uses OpenCL, where CPU/GPU). After a few seconds, the iMac fan begins to be really strong and seems to reach its maximum speed.

  Then, after a few minutes of this heavy burden, the iMac simply restarts, and the fan slows down and stop. After the reboot, everything is back to normal, with the exception of the warning illustrated by Mac OS X, who said that the closure was not planned.

  I'm sure that this behavior is not normal. I don't see why a computer should reboot/crash when under heavy load.

  Note: you can also, to transcode some clips or movies I used the excellent software called Handbrake, using CPU only encoder ffmpeg, and I don't remember having accidents even if the CPU has been loaded and FAN running loud too. So maybe it has something to do with GPU?

  How can I understand what is happening?

  Thank you very much.

  Thomas

  First try to reset the SMC reset management system (SCM) controller on your Mac - Apple Support

  If continuous reboot to run the Apple Hardware Test mode extended using Apple Hardware Test - Apple Support

• Tips for Lightroom 6 help indicates again that if "using a graphics card AMD/ATI under Windows 64-bit with the AMD Catalyst driver 15.7 and Lightroom CC/Lightroom 6 hangs or crashes during launch or when you edit an image in the develop module.»  This

  Oops... .the everything in the title... My apologies!

  Tips for Lightroom 6 help indicates again that if "using a graphics card AMD/ATI under Windows 64-bit with the AMD Catalyst driver 15.7 and Lightroom CC/Lightroom 6 hangs or crashes during launch or when you edit an image in the develop module.»  This problem may occur when you use AMD Radeon HD 5xxx card graphics series 8xxx running versions of pilot 14.501.1003, 14.502.1014 and 15.200.1062.1004. For the Solution of the page install the AMD Catalyst 15.8 Beta Driver for Windows (posted August 31, 2015).  However, there are now a 16.1 driver... would this work with Lightroom 6buttons Photpshop CC without problem or should I stay with 15.8 beta for Windows driver (Windows 8.1.

  Thank you very much

  Paul Winstone

  Hi Paul,.

  This article was created when users have faced problem with old drivers for AMD graphics card.

  Yes, you can upgrade to the last 16.1 pilots and who should work well however, you should have 1 GB VRAM or more to take advantage of the GPU processors.

  Kind regards

  Claes

• Firefox crashes (even in safe mode) constantly and use 50% CPU while doing

  I use Firefox 36.0.1 and Windows XP (32-bit version).

  Lately, Firefox made this weird thing where it stops randomly load anything, as if the connection has been broken (it isn't, any other works very well). In this case, Firefox uses 50% CPU, when it is usually revolves around, well, 0%. Restart the browser, or waiting for a few minutes "fixed" the problem temporarily. Same thing in safe mode, too.

  I have the feeling that this * might * be related to Flash, since it seems to happen more often when I am watching videos, or stream on the shaking. I tried to disable the plugin-container and update the Adobe Flash Player plugin, with little success. Malwarebytes could not find anything either, and it does not feel like a virus anyway.

  Whatever it is, I'm out of options at this point. I had a lot of problems with Firefox for a while now, especially when it comes to videos/animations (I can't play the videos of Vine.co , for example), and it starts to make it difficult for me. I really don't want to switch to Chrome, I don't trust of Google and their browser doesn't have a lot of key functions I like in Firefox (such as the sidebar bookmarks < 3), so I really hope I can get help here.

  Any suggestions?

  Chrome is a pain, I tried to go back and difficulty of Firefox (so far), and again, I think I found the problem. I should mention that I tried these 5 suggestions before, btw, and none of them got rid of the problem. Yes, even in safe mode, with a profile is empty, no plugins, no firewall and without tab, it happens again, somehow. And Yes, Chrome will work fine with Firefox running in the background, as I mentioned in my previous post.

  What he did for me was turn off Prefetching and IPv6 times in all: config, following the instructions on this this page .

  I'm not sure that one did the trick (I kinda afraid to mess with that again, but I could test if you want to, it might be useful to others), but it looks like everything is going well for the moment.

• Firefox has started to freeze on the opening and hangs / freezes frequently during use.

  Firefox has begun to open very slowly [very]!, as well as to crashing and freezing during use. What's happening on all my three machines, two running Win 7 and the other win 8.
  I tried refreshing and disabling, but to no avail hardware acceleration.
  Now it seems to freeze on opening and takes a minute or two to become sensitive, or not at all.
  When I look into during a freezing Task Manager, I see the Firefox process use 35 to 50% of memory [I have 8GB, 12GB, and 16GB] and up to 50% of the CPU resources.
  Everything was fine until the last two weeks.
  In addition, last month, I noticed an almost permanent error on the status bar message - ' Sync has encountered an error during synchronization: unknown error. " Synchronize automatically retrying this action. »

  
  

• 2-3 days after the expiry of my warranty of one year, my computer turns off suddenly during use. I rebooted, but it stopped again.

  2-3 days after the expiry of my warranty of one year, my computer turns off suddenly during use.  I rebooted, but it stopped again.

  The model is that the computer runs for 15-30 minutes, then suddenly stops, the system reboots, runs for 2-3 minutes, stops, restarts, spans less than a minute, stops, restarts, stop after a few seconds, etc., and at that time there I give until the next day when I repeat the same cycle all over.    I have Windows Vista Home Premium 32 bit and it is a model of Dell Inspiron 518.  There is no error message but a beep at startup upward.  I ran Windows repair program 'Start' who did a restore without success.  The problem occurs even in Safe Mode.

  Does anyone have a guess as to what is the diagnosis?  Thank you.

  Hello

  Could be hardware or even heat and ventilation the related. Try using a small fan to increase ventilation. When a PC
  Remove ALL power and reinstall the memory, all cards and cables (do just not shake - remove and replace-)
  cables on both ends where possible).

  As it does in Mode safe so you probably need technical support in a real store of the computer - no Peeks/leeks at BestBuy or other large shopping areas. Very difficult to solve if it does not remain under tension.
  It remains under tension if you start from the disc of Vista?

  -----------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on these reboots.

  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• 35.0 Firefox uses 100% cpu on Mac Yosemite 10.10.1 then either breaks or needs force quit.

  I had this problem since installing Yosemite and using 34.0.5. I upgraded yesterday to 35.0 but still the same problem. Firefox will work happily for a while and then all of a sudden will use 100% cpu. I disabled all extensions and plug-ins and that made no difference. If I use Java (8-25), it will usually make it crash but not always.

  To make things worse, the accident report appears in Greek (which is considered in another question already).

  Have you tried to reset Firefox? Refresh Firefox – reset the parameters and modules

• Why Firefox uses 100% CPU when I am connected to eBay?

  Firefox uses 100% CPU when I connect eBay.

  Hi apdubois, it is useful to know that Flash is the problem but, as you point out, life without Flash is not very interactive.

  It is a standard orientation that addresses the most common reasons for problems of Flash in Firefox. I'm sure you've seen some of it before, but just in case:

  (1) make sure that all recorders/downloaders who interact with Flash media are as up-to-date as possible, or disable them temporarily.

  (2) disable graphics hardware acceleration in Firefox and Flash

  (A) in Firefox, uncheck the box here and restart:

  the button Firefox orange (or the Tools menu) > Options > advanced > General > "use hardware acceleration when available.

  (B) in Flash, see this article from Adobe technical support: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues

  (3) turn off protected mode (Windows Vista/7/8)

  See this article from Adobe support under the heading of 'Last resort': Adobe Forums: how to fix protected Flash Player for Firefox mode?

• Screen went black during use.  What can be the problem?

  That may be the problem if the screen turns black during use?

  First of all, if you use an iPhone 4 as indicated in your profile, it cannot be updated to iOS 9.3.

  Regarding the screen gone black, try a reset.

  Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  If again, the screen becomes black, it is very possible that this is a problem with the hardware for a date of the iPhone 4.

• Computer crashed recently, used the version 3.6.15, now with 4.0, how do I bookmarks from the previous version that was on the old computer. All files of this computer on the new computer under HD1?

  Computer crashed recently, used the version 3.6.15, now with 4.0, how do I bookmarks from the previous version that was on the old computer. All files of this computer on the new computer under HD1?

  bookmarks.html contains no bookmarks, this file is no longer used to store.

  Are you sure you're looking in the right folder, you are possible to search in the installation of Firefox rather than the profile folder folder. The following link provides details on the location of the profile folder - http://kb.mozillazine.org/Profile_folder_-_Firefox

  If you do not find places.sqlite you may not have access to your old profile folder.

• My iphone screen 6 hanging suddenly during use.

  My iphone screen 6 hanging suddenly during use. Subsequently, the screen is empty. I can't turn off the phone also. He's obviously still works. Siri is active and the calls are coming. However, since the screen is blank, I can't use it. Is it possible to turn off a phone and then check if the display stuck problem disappears.

  Hold the home button and the sleep button sleep for 15 seconds until you see the apple logo.

  It is quite possible that the screen can be interrupted.

• MacBook Pro random high utilization of the processor (iCoreService/DCAManager using + 400% CPU?)

  Hello

  I'm running an Early 2011 Macbook Pro running OS X Yosemite 10.10.5 with a 2.2 GHZ Quad Core i7 processor 1 TB Samsung 840 EVO SSD and 16 GB of RAM Crucial. I noticed for about a month, I'm going to do a simple task or two on my Mac, then all of a sudden I noticed spikes CPU temporary, 90 + degrees C and the kick of fans trying to cool high speed. Well, I don't know why this is happening when I do nothing to justify a high utilization of the processor. I'm used to the CPU running hot when I do something intensive graphic as running Autodesk Inventor CAD software, run a machine virtual or even watch a 1080 p @ 60 fps video on youtube (it is the lowest resolution that requires the Mac switch to the dedicated AMD Radeon 6750 M GPU that usually eventually warm it quickly) , but this use high random that happens when I have Mail open in the background, and one tab open with a 720 p @ 30 fps video Youtube open (or even less). I took a few screenshots of the activity Manager indicating the best processes and Intel Power Gadget indicating the temperature of the CPU:

  

  

  

  Does anyone know what are iCoreService and/or DCAManager and why they use so much of my CPU when this happens? And someone has encountered this weird behavior before? Thanks in advance!

  The most likely cause is an applicztion you have running that is corrupt and forcing them to use the CPU too. Were you able to kill the process in activity monitor? If you have not yet tried to do, so I'll try that first. I would also try to quit all open applications.

  If you start the computer in Safe Mode , you can test if the problem is still there. If it isn't, usually means something that is managed by you start-up or an application that you use may be the cause.

• Satellite Pro A100 crashed during Windows BIOS upgrade, now does not start.

  Satellite Pro A100 crashed during the upgrade of the bios from windows (upgrade the bios using windows), now the laptop will not boot. I press the on switch and it gives me just a blank screen, so I think that resets itself. I really need help solving this because I have a University paper due in the next few days and I need my laptop!
  Close for any help.

  It's a scream! :_| : O

  This looks like a damage ROM module!
  How did you do the BIOS update? I have red in this forum that a wrong procedure or wrong BIOS can damage the motherboard.

  I think that it s a deal. I put t know if it s needed to change the entire motherboard or update the BIOS again but I n t think you will be able to do it yourself.

  I think the best way is to ask the Toshiba service partner in your country.
  I think they'll give you more details on the handling of the Fryer

• Satellite 4080 freezes during use. Event ID 5 - port i/o address not

  I have a Satellite 4080 running windows xp sp2 makes it reasonably well. It is used only for basic word processing and Office Automation. Laptop freezes during use and should be set out & back again. In case the Viewer is an event id number 5 the ACPI BIOS attempts to write an unauthorized i/o port address. This is due to the problem with the freezing of the laptop? Microsoft as useful suggest that never contact the editor of the BIOS on possibly updating the BIOS. Any suggestion would be appreciated.

  Hello, Robert

  The update of the BIOS you can find on http://www.toshiba-tro.de/subpage/bios.html but check it please the MORE INFORMATION on the right side.

  I don't know if this will help solve the problem, but you can try. Please be careful with the BIOS update and read the instructions first.