W510 does not wake from sleep

When I close the lid or let it expire and go to sleep he does not wake up when the cover. It doesn't happen every time, but it happens about 8 links on 10.

You can tell it's still on, but the screen remains black.

I searched and didn't find any resolution that worked for me.

A recommendation was disable incident reports, and that did not work.

I preformed also all updates of the firmware as well as the upgrade to windows 8.1.

The problem is exactly the same point 8.1 as it was in windows 8.

Just to follow up.

I did a factory reset the origin of windows 8 and the problem disappeared.

I think it may have been originally caused by my being too aggressive when bloating. I have uninstalled something I shouldn't that caused the problem in the first place.

In any case;

problem solved.

Tags: Acer

Similar Questions

  • DELL Inspiron N5110 does not stop and does not wake from sleep

    Hello.

    I have Dell Inspiron N5110, who cannot stop it in Windows 7 or Ubuntu Linux. Specifically, I started Ubuntu Live from CD to eliminate the possibility that the problem is in Windows 7. Stop in Ubuntu does not work either. This proves that the reason for not an application in Windows that remains suspended and does not allow the laptop to close.

    The laptop computer may not wake after sleep or either Hibernate.

    I tried all the solutions that advised you to all the other people in the forum who have the same problem.

    1. the laptop cannot stop mode safe either.

    2 may not stop even after clean boot Mode - all services disabled and all package disabled Startups.

    3. I haven't tried to change the Power Options Advanced "Allow hybrid sleep" - both WE "On AC Power" and "Battery operated" - no change.

    4. I tried to install the latest NVIDIA video drivers. This did not help either.

    5 running only on battery change nothing - not cannot always stop.

    6 race only on AC adapter without battery - still cannot stop.

    7. I tried to remove the AC adapter and the battery, and now the POWER button for 30 seconds to RESET the phone - did not work.

    ATTENTION: I have read your forums all day and has seen at least 10-15 reports on the same problem, and not a single case fixed.

    8. This is why I have not tried Flash the BIOS with the latest version - I have read other people who have tried and it didn't work either.

    9. I loaded the BIOS default settings (F9) - stop still can't.

    NOTE: Change something in the BIOS and getting out once caused the laptop to freeze and I had to power off by holding button for a longer time.

    10. I ran DELL Diagnostics menu Boot (F12 at startup) - no error found.

    11. I couldn't find IEEE 1394 adapter in Device Manager to change the power management settings.

    In fact, none of the suggestions that you can give to change something in Windows is logical because I already mentioned that stop in Ubuntu does not work or the other.

    The question seems to be either in BIOS or a hardware problem. But which component? This is the CD/DVD drive?

    It is a new laptop.

    Please advice how to proceed. If you know which component fails please tell me.

    Remove the keyboard and palmrest (dell guide shows you how) and you should see a small button battery. Remove it at least 10 seconds, then put back. Enter the BIOS and make sure that there is nothing weird was changed. It should work fine now. I had this work in Ubuntu 12.04 these last days with no problems.

  • elitedesk 800 does not wake from sleep, performed a start rather

    HP EliteDesk 800 G1 USDT Win8.1 Pro 64-bit

    After the sleep mode to not wake up the keyboard or mouse click.

    Pressing the key Power performed a clean boot from the stop.

    Computer came with Windows 7 Pro. I installed Windows 8 since the disks provided with the computer and improved online at Windows 8.1. Everything seems to work fine, but the modes of Eve/hibertation.

    By pressing on a keyboard or screen sleep button apparently sends computer standby: the screen is black, white power button mouse and keyboard LED off, LED blinks once every two seconds.

    However computer not wakes up on a key on the keyboard and pressing a button / a computer turns on, but does boot upward as if it were completely off.

    Already checked for the latest version of the BIOS and enabled for keyboard and mouse power management.

    Hi Jaco,

    Thanks for your suggestion. I tried to experiment with the settings of power for the keyboard and the mouse, and simply made sure that both are enabled to wake the computer from sleep mode. I began to suspect that he may be the controller USB keyboard to wake the computer asleep, and I've experimented with a PS/2 keyboard without result.

    Then I reread in BIOS settings help mode "standby" should be indicated in triple LED flash, and I was getting only single blink of the LED, and I started to look into each option in Advanced settings of the power management and guess what I found?

    THE SOLUTION

    When I turned the sleep > allow hybrid sleep set Off, "sleep mode" started working:

    By pressing on the sleep button sends computer mode 'sleep', white LED travels triple flash and two seconds apart, and by pressing a key on the keyboard wakes the computer.

    Apparently my hardware configuration somehow comes into conflict with the Win8 hybrid sleep mode. SSD?

    HP EliteDesk 800 G1 USDT Core i7-4770 8 GB (2x4GB) DDR3 256 GB SDD,

    DVD +/-RW, keyboard, mouse, GigLAN,

    WIN8.1 Pro 64

    Thanks to all for lead me to this solution!

  • Satellite L750 freezes constantly and often does not wake from sleep

    Hello

    I have laptop Toshiba Satellite L750 - 1 L 8 with Windows 7 Home Premium x 64,.

    Since I have (about a year and a half), it freezes sometimes that I use and often not waking sleep of form. The symptoms are the same in both situations: nothing does, CTRL + ALT + DELETE does not work and there is no further assistance as the ' down in now the starter for 3 sec button. Until recently, it freezes only occasionally, but now this, so that each half-hour, which makes the computer unusable.

    When I tried the reclamation, the Toshiba service responded that the problem is in the software, so not included in the warranty and that the windows must be reinstalled.

    I did and he recovered to the factory setting, but even if the problem persists even in the authorized computer. It freezes again at least every hour.

    I don't really know that the cause could be now and I hope that someone could know and help.

    Thank you

    > I did and he recovered to the factory setting, but even if the problem persists even in the authorized computer. It freezes again at least every hour.

    Do you mean that the system hangs when using the laptop?
    This is definitely not good.

    Have you noticed a higher internal temperature?
    High temperature might affect systems and could lead to such outputs black system.
    In case you never clean the cooling fans in the past, I recommend you to use a jet of compressed air and remove dust from the air vents.

    With regard to the question of the sleep mode:
    In this case, you should check if the BIOS is updated. In case of BIOS version more recent has been published, you should try a BIOS update

  • X 1 yoga (and Yoga 260) does not wake from sleep

    Hello

    We got 2 x try and buy Lenovo Tablet portable Yoga (a X 1 Yoga and a Yoga 260) to assess their skills for our company, because we have the intention to upgrade many of our employees laptops. However, since we got the devices we noticed on two common problems with display and waking from sleep. Very often laptops awake properly with the screen remains black. In these cases, the backlight of the display seems to turn on, and I guess the system works somehow in the background. Put the computer to sleep again (for example, by closing the lid) makes the computer wake up correctly at the second attempt.

    Different error in the same category is when a video is running and the laptop is connected to AC - plug the AC cord is black screen while playing the media kept its content.

    All drivers have been updated to the latest version via 5.07.0029 Lenovo system update.

    Any ideas? I also tried to open a support ticket, but Lenovo wanted to send and install a new (!) presentation. Apparently, it seems like a driver/software problem?

    Best regards

    After finishing with a touch screen not responding not (as far as I can tell a result of v4.19 Touch Firmware Update) on top of the issue of the sleep-wake I'm frustrated and went through the process of reinstalling the entire system.

    I used the reset at startup procedure to put the system back to factory settings. After factory reset the sleep-wake issue had disappeared. I applied about all the updates that are currently available via Lenovo system update and everything still works as expected. Still strange that this issue was not solvable by any other means before...

    Interesting effect: after the reset of the touchscreen remained non-functional. After a few days without touching the laptop screen feature has finally decided to detect the HID. I certainly did not apply to update or change. 'Miracle' is almost an understatement in this case!

  • Reference windows xp Dell does not wake from sleep mode

    I am running XP service pack 3. When I try to wake up computer sleep mode orange light flashes but will not start. I hard reboot - sometimes the work - sometimes not. Sometimes he began alone. It is an intermittent problem.

    Hello

    Try the procedure described in the following article and check the status of the issue.

    Solve problems to wake the computer from sleep mode.

    http://support.Microsoft.com/kb/266283

  • DisplayPort monitor does not wake from sleep

    Hello

    just bought a Sapphire Radeon HD 7790 & realized, I could connect three monitors - yay.

    A few times the small monitor connected via displayport has not awoken from his sleep.  I have a beep as if remove the USB device.  The monitor power on / activate suits him.

    The two monitors connected with DVI awake without problem.

    I see threads referring to assign the displayport as the initial display adapter in the BIOS, but I don't see anything in the my BIOS (XPS 435MT) for graphics cards.  The GPU (I guess it's the GPU) set the dsiplayport as the monitor #1 monitor in the numbering system.  I understand that I have no control over this.  The attached DVI monitors are numbers 2 & 3.

    Carefully analyzed the logs of events during this time & can't find anything.

    Any help?

    Thank you

    Will update & reply to this message, I hope it helps someone else.  Apparently the TriXX is OK on the 7790.

    This YouTube video is my card:

    Video YouTube TriXX of Sapphire 7790 OC double-X

    If this does not work you can try changing the power settings in the BIOS - in my case, in the BIOS power management settings is not set to the sweetest sleep state.

    Right now the ACPI Suspend Type is S3 str:

    ACPI Suspend to RAM: ACPI stands for Advanced Configuration and Power Interface - that some people may find as options in their BIOS Setup programs. The Suspend to RAM, sometimes referred to as feature S3/STR, let the PC save more power in standby mode, but all the breast where the computer-related devices must comply with ACPI. Some BIOS have a S1/POS option for this scenario. If you enable this feature and you are having problems with the splash screen, just go back into the BIOS and disable. (not one of my options)

    Definition of ACPI to form of hunger more power to suspend for example s1 (POS) of power in standby mode could be the answer:

    S1: All processor caches are flushed, and the CPU stops the execution of the instructions. The power of the CPU and RAM is maintained. Devices that do not indicate that they must stay on can be turned off.

    S3: Commonly known as secondary, sleep or Suspend to RAM (STR). RAM remains powered.

  • Satellite L750 - does not wake from sleep mode

    Hello

    I just bought a Satellite L750 and he didn't wake up from sleep mode. I force with button stop / stop each time in switching mode 'sleep'.

    Any ideas?

    Are you using the original pre-installed OS that you got with your laptop?
    Have you noticed the same problem with the hibernation mode?

    Did you install additional software?

  • T500 does not wake from sleep mode

    My T500 (2241-3XU with Win 7 64 bit Ultimate) has never been able to wake mode 'sleep', once the lid is closed. I have finally returned to the use of hibernation, but I was just wondering if there is a new patch that I'm not aware of. I tried to find info a few years back before hibernation. Any ideas?

    Thank you.

    Dave

    Try to install the latest version on it. 1.62 should collaborate with the T500 however.

    You can also see if your BIOS is up to date.

  • Computer does not wake from sleep sometimes

    When my computer goes to sleep sometimes it won't wake up.  It seems to happen when not used for long periods-2 or 3 hours.  In power settings, I sleep at 5: 00.  The screen turns off, but computer would stay as wanted.  When he did this time the screen would not come back.  Usually to move the mouse could get things.  I tried to hit the buttons on the mouse and the keyboard, nothing.  I had not turned monitor works, reads "no signal".

    All the ideas!

    Thank you

    Sleep store the Windows operating system into RAM memory and depends in part on the power to keep what in memory to be corrupted.

    If disabling sleep slows down your problem, then try

    Memtest86 +:

    It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory

    sticks are bad or the values of the SPD in the BIOS are correct.

    Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.

    http://www.memtest.org/

    Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)

    http://www.overclockers.com/forums/showthread.php?t=409152

    J W Stuart: http://www.pagestart.com

  • HP ProBook s 4540 - does not wake from sleep mode

    I tried a bit of everything that I could find on the Internet or what I know. Reduces the problem to the switchable graphics. Seams like WIndows cannot successfully choose what gpu. When I try to reactivate the screen is empty if the hdd led flashes and when the keys on the keyboard I can hear windows sounds. I have the latest drivers from Intel and AMD. All the updates of windows, all the drivers and software on the site need driver of HP. Double checked for the correct version, 64 bit etc etc. I tried to turn off windows hibernation, I tried to do hard reset, I tried almost all the power management, associate of hp of power, switchable graphics options including bios (I can only enable or disable graphic switchale) (for some reason I can't choose a fixed GPU?) I also checked for updates via the HP SUPPORT assistant. I tried save mode. I went through all the options of windows, I think. Tried the plans of different powers, ati catalyst (worst piece of sowtware never) options, etc. Nothing seams to work. I would appreciate any help from HP.

    I not unhooked old drivers with CCC (Control Panel-> Add) or remove programs-> AMD Catalyst Install Manager-> full delete after installation;

    My computer - right click - Properties-System - Device Manager - graphics card

    Amd Mobility Radeon HD 7500/7600 Series (Microsoft Corporation - WDDM 1.2) + yellow exclamation point

    Right click - Update driver and select new driver in the folder of the driver Amd (AMD C :-> AMD_Catalyst_13.6_Mobility_Beta-> packages-> drivers-> screen-> W86A_INF)...

    CCC not installed but it works great [cinebench 32fps] and solved problem of mode of sleeping

    If you are installing error cinebench or aida64-online

    (1) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\VC12RTx64\vcredist_x64

    (2) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\VC12RTx86\vcredist_x86

    If windows experince index error "windows media encoding/decoding performance.

    (1) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\WMVDecoder64

    (2) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\WMVDecoder

  • Laptop Dell Studio 1555 w / Vista does not wake from sleep when the lid is open.

    I have a laptop Dell Studio 1555 with Vista Premium 64-bit. Until last night, the laptop would run mode standby when I closed the lid and woke up when I opened the cover later. Yesterday I was downloading photos from a Canon camera via USB. I close the lid when I did. When I went to open the cover later the laptop screen remained in black and white. The power button is lit, but the only way I can get to meet is to hold the power button until it turns off completely, and then restart the laptop. A difference when the lid is closed, I think the power button will blink and turn off slowly while he was really in sleep. He remains on all the time now when the lid is closed. I tried to go into power management and put the laptop from sliding when the lid is closed, but has not made a difference.

    Run the system restore and choose a restore point created just before the problem occurred. Steve Winograd, MS - MVP (Windows desktop experience)

  • Ssatellite U300 - 13K does not wake from sleep mode

    He has had this problem with windows vista and I decided to switch to Win7, but it still has the same problem.
    He falls asleep, but then don't wake up no matter what I click.

    Can you help fix?
    Thank you

    How set you the mode standby?
    The power LED flashes when the laptop is in sleep mode?

  • My iMac does not wake from sleep correctly.

    When I try to boot my iMac mode 'sleep', the program request my password, but then entering in the it, the iMac automatically inserts its own password (about twice as long as my password 8-digit, but only as a series of points), then rejects the password and fails to awaken.  Attempts to reload the password only lead the iMac's repeated attempts to enter his or her own password and fail to awaken.  The only solution that works is to shut down the computer using the Start button on the back and perform a restart.  Does anyone else have this problem?  Is it fixed that anyone can suggest?  Thank you.

    What version of Mac OS X is currently installed? I doubt it's OS X 10.9 as indicated in your profile.

  • Satellite L850-A635 does not wake from sleep mode

    purchase date: June 6, 2012

    When I put it in mode 'sleep', he goes to sleep, but when I start, it awakens me unless I have remove the battery, put in place and turn it back on.

    Please advise me how I can solve this problem

    Hello

    What happens if you press the power button / stop 4 sec long?

    Please run a HARD drive recovery procedure: (F8, fix my computer-> Toshiba HDD recovery)
    Don't install any software, but test the "sleep mode" immediately after that drive HARD recovery is completed.

Maybe you are looking for

  • Sorry, but I don't like the new layout

    The new layout looks slick and all, but it is very difficult to follow the discussions. Please fix. I would like to see all the messages and click on see all responses. It seems much harder to navigate the site with these new changes. Am just missing

  • FOUND: ipod touch 5 in Vernon CT

    February 16,2015 I found an ipod 5 touch (model A1421) in Vernon CT Legion field near a swing Park. Unit was dead so I loaded and the date was December 31, 2015, which is probably all the time, it was lost. Serial number is DJ * 4JT. You can contact

  • The closest point of all in a table

    Hello I have two table 2D elements. Array1 and array2. I take a value from the array Array2 and calculate its distance from all elements of array Array1. I need to get the item that is the short of it. How is this posible? I did a VI. After that calc

  • password check failure fatal system error stopped its a compaq mini Cq10 CNU018089X

    Can u help me please, I have the same problemPassword check failedfatal error... are stoppedCNU018089X

  • Crash of Freelancer

    I bought recently a Freelancer, I used to play on XP Home, now I'm on a laptop with Windows Vista Basic and when I start the game, the screen goes off, and nothing else happens... can you help me solve this problem?