W510 LED next to the fingerprint sensor stays on after turning the power on power off

Similar Questions

• HP Jet 11-r010nr: stream hp 11 does not startup, the led next to the button / stop is on

  I have a friend who brought me their 11 2 weeks older HP flow because all day yesterday they tried to restart the laptop and may not have to start at all.  I tried the famous hard reset by holding down the power button for 8-10 seconds of course which is suggested (I have it pressed for a good 40-50 seconds).  I also now tried the power button and the mute for 40-50 seconds.  No luck.

  Unfortunately, the battery is good behaviour and because he is still under the manufacturer's warranty, I can't remove the back and turn off the battery in this way.  (Can I ask what is the point to make the inaccessible battery that the mere fact that you earn more money by forcing people to return the product to HP to avoid the cancellation of the warranty?  Apple does it too well, please do not follow their trend!  I love HP, but this is going to force me to buy elsewhere!)

  Can someone help me or point me in the right direction to help with this?

  The light next to the power button is on and the light on the projection side, it is turned is on but the screen is black with no cursor.  It has been unplugged for 3 hours in the hope, the battery is going to die and I can get somewhere with him but I'm not sure how close it is exactly to be dead.

  She becomes very frustrated by that and I don't blame him.  She's at the point where she will return it and switch sellers totally if it can't be fixed.

  The battery is eventually died.  I plugged in the charger and Windows restarted without problems.  Research in the logs to see what happened, I noticed that it didn't have an update for Windows 10.

  My guess is for some reason any it failed but the laptop supposed it was finished, restart it it basically says "wait, what am I I loading?" and froze.

  Needless to say, I downloaded the update from Windows 10 and installed successfully.  I restarted the laptop and now everything is fine!

• After that turn the power off for a few days and then back on... all my desktop ICONS was reorganized.

  After that turn the power off for a few days and then back on... all my desktop ICONS changed. I placed the worms where I want that they and computer restarted and they get rearranged again. Help, please.

  Hello Kenneth Pincus,

  You can create a new profile on the computer and if the desktop icons stay on their position. If this is not the case, the other profile is corrupt. To create a new user profile, you can see the article mentioned below for the procedure.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

   

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

  Let us know the results.

• HP Officejet Pro 8500 A909g: B87126D0 - turn the power off and then on again - Officejet Pro 8500 A909g

  Printer displays this error.  When I turn it off it automatically re - start, head cleaning cycles and system then, checking everything as you think it is all new sorted, it goes back into the error.

  I tried without clogging and the location also.  I tried to turn off the wireless cable connection but the loop continues.

  I've seen other posts on this error of 2013 and 2014 but don't know if the answer is the same today?  Can you please suggest a solution?  Thank you

  Welcome to the HP Forums @MrsNoName2013

  I came across your post about the problem of error code you encounter and I wanted to respond to help with my suggestions. I have some links to share with you, because the error code could be coming during a network installation, or it could be a type of system or the cartridge of the problem. I wanted to cover all the bases to try everything and nothing. If you do not connect the printer to a network, you can ignore the first link and go the other links.

  If the problem persists after troubleshooting, please try to call the hotline to discuss replacing the printer or the rating of. I will include HP contact info below to reach them directly.

  1. The "Bxxxxxxx" Error Message appears on the product during the installation of network
  2. A message 'Replace the ink cartridge empty next' on the all-in-one after I installed a new cartridge
  3. A "alignment failed" Error Message appears on the printer control panel
  4. "The following printhead appears to be missing or corrupt" or "the following printhead has a problem.

  Please click the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• HP Pavilion 14-v043tx: laptop stays on after turning it off

  This happened since I updated to Driver Intel Management Engine Interface (MEI).

  After that I tried to turn off my computer (start-> Power-> Shut Down), the laptop turns on (the power LED remains lit even when the drive LED and more it stops flashing). I tried to let it go for a while because I think it's a sort of background to start the process or else.

  For a long time I tried is long about 5 minutes, and the always ON power (the drive LED already stopped), because of this I have force-tap holding down the power button / stop. After trying to turn it back on, it seems that there is no problem on that (my system started normally). It was happened twice since then, after updating

  Is something wrong with my laptop?

  Hello @nobodykid,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I read your message on the cell phone do not close and wanted to help!

  If please review the solution on the following post, offered by DanG82and let me know how it goes: sleep mode with windows 10 problems

  Please let me know if this information has been helpful by clicking the thumbs up below.

  Kind regards!

• Poster printer constantly turn the power off then on again. OfficeJet 4500 wireless on Windows 7

  New installation of HP Officejet 4500 Wireless on Dell Inspiron running Windows 7 Professional.

  I can't past the message on the printer then "shut off".

  I tried unplugging all the cables on hold and reconnecting repeatedly and in various orders, but without result.

  I find HP help impenetrable to user pages quite a novice.

  Can anyone offer a solution please

  Thank you very much

  Ted

  Hi Tedlngle,

  Remove the cartridges from the printer and then unplug the printer for 1 to 3 minutes, and then plug the printer back. Make sure that the power is connected directly to the wall outlet. Follow the instructions on the screen to the printer to reinstall the ink cartridges and let me know if you have the same problem?

• fix the power off settings AIO

  I turned off during the night. The IOA turns on automatically about 3 hours later and I'm awakend by the light of the screen. Any advice on how to trigger the right npower?

  Thank you. Correction of a problem. Called Lenovo. Has had 2 sessions and 2 call supports but has found a way to stop the pc turn on. With 'fast start up' in power settingsl

• When you start windows or turn the power off, on-screen messages in Spanish, is it possible to just switch to English?

  Hi team,

  My question is this. I installed windows 7 ultimate on my Lalonde and a virtual machine, two of them have been installed in Spanish, I downloaded the English MUI Pack and I installed successfully.

  Now, I'm able to see everything in English once I'm connected, however when windows is start or turn off, the messages on the screen appear in Spanish.

  On this basis, make is possible to just switch to English?

  Original title: language

  Ralph, try the procedure described on this page.

• I have a problem with the power off of Microsoft Security Essentials.

  Original title: cannot close Microsoft Security databases

  I have a malware called yellow Moxie and I can't seem to go in... I need to know how to disable Microsoft Security Essentials to clean malware off the coast.   Is it possible to temporarily suspend protection?

  Try to start in safe mode with network, then scan with the free version of

  http://www.Malwarebytes.org/products/malwarebytes_free/

  If no repost of joy for specific groups of viruses

• Turn the power off when you insert the new hard drive (additional)

  I have a server poweredge R710 Dell with a PERC 6i controller. Currently, there are 3 installed disks than RAID 5 and are 0-2, all of the listed physical disks are online with no hot spare.

  My question is: I don't have 3 disks to install on the server exactly the same readers who are in the current configuration. Do I have to turn off the server to install these drives?  (I'll use OMSA to develop the existing single VD configured.  I saw a post that says not to shut down the server, so I am just wanting to make sure that everything I do is go on the server, install the new disks in slots open while its engine to the top and then make my other functions in OMSA to extend the RAID.

  Thank you.

  You never turned off to introduce new disks, except IF you are migrating a VD together for another computer or controller.

• power led on the rear of the computer the power button / stop turns on, then turns off.

  I have a HP TouchSmart 610-1015xt.  The light on the transformer power is on, but not exactly brilliant (I think it's good, but not sure).  The light next to the power input is on.  When I plug in the power, the power led lights up for a couple / few seconds then turns off and does not turn.  At no time the computer capable of running and it does no whether noise (no fans, no beeps, no attempt to start.

  Any suggestions?

  Figured it out.  Apparently I have reset the battery internal and then unplugged the power button circuit and then he started upward.  The only problem is that now it will restart automatically every time it is closed or even sleep.  I'll start another forum on this issue.

  Thank you for your help.

• Pavillion G7 1263-nr: HP Pavillion G7 led beside the power supply plug flashes 3 times... does not illuminate?

  Unit does not illuminate. When the Start button / stop is pressed with power cord only or with the battery and the power cord or battery only I get 3 flashes of the white LED on the side of the unit next to the power supply.

  I replaced the receiver taken power in the change of unit No.....

  I used an other (workin) power cord and adapter... no change.

  I tried another battery (work)... no change.

  I pulled the two memory chips don't... no change.

  I put the two don't chip memory in one at a time... no change!

  I'm out of solutions short of replacement motherboard which is not profitable unless I want to take a chance on a reduced opportunity to the Board of Directors.

  Only the indication of all this work are three white flashes of LED is located just next to which DC adapter/cable plugs?

  Any other suggestions/diagnosis would be appreciated.

  Thank you!

  I had to contact HP and according to them the power port led flashes 3 times after pressing the power on button, indicates a failure of the motherboard and requires a replacement.

• notebook G71-449wm flashing 3 led lights in the lower left corner, when you try to start

  Used laptop computer for more than two hours so that it was plugged and a caveat, I got 12% battery left and needed to plug it in to recharge the battery. Checked and it was plugged in and taken power took place. A few minutes later, he loses the power of the battery and turn the power off. Now I can't start but only to see the 3 LED flashing in a sequence of flash 3, and that's all. Help?

  see the following links which explains the LED error codes:

  http://support.HP.com/us-en/document/c01443366

  http://support.HP.com/us-en/document/c01732674

  http://support.HP.com/us-en/document/c00372748

• Satellite A100 - battery all night while the power is off

  Hello world

  I have a new Satellite A100 and I noticed that when I fully charge it and then turn the power off and remove the plug from the socket, the next day when I stick it back in the socket of the control light yellow says that he is in charge.

  So, I turned on the computer laptop and checked is full battery and it says 94%. I let it finish loading at 100% then it off again and came out of the plug. The same thing happened the next day! He held again!

  I don't know that I did not in Hibernate mode because I checked all the settings and choose Turn Off to turn off the laptop.

  I read on the battery recall, so I searched on the toshiba site and downloaded the program from battery test. The result came out that my battery is not between the serial numbers involved. I even manually checked the number on their list but mine is not supposed to be affected.

  Is anyone having the same problems, or is it normal that the battery itself?

  Please let me know... Thanks :)

  Hello

  It is normal and you should not worry about this. The same thing happen on my Tecra. Please check this Toshiba document on this http://support.toshiba-tro.de/kb0/FAQ6301EP000ER01.htm

  Good bye

• 18 XPS does not start, the power light will not stop flashing

  I was upgrade this computer to Windows 10, I did install one instead, but the children had spyware which even then showing upwards. I did a refresh, there no I did an installation and finally got in windows. Some updates installed and restarted.

  The computer was bricked since. The only thing that happens is the LED which indicates the power above, the button will not stop flashing white light. Connected or not connected, after having held down the power button for 5, 10 and 30 seconds, the led stops flashing for a while and then again. I tried several points of sale. No idea if it is a coincidental breakdown.

  I'll change that.  I went back in and re-removed the cable from the battery.  I also removed the CMOS battery cable this time... I was at least an error message on the screen and access to the BIOS!