W520 waking up from his sleep by himself and to exhaust the battery

Similar Questions

• Vista wakes up from his sleep by himself

  As the title says, my vista pc wakes up from his sleep by himself. Normally, he'll sleep for 10-15 minutes before you wake up. At other times, it is random and wake up in 2 minutes or 30 minutes. I looked in the forums of countless and tried the suggested solutions, but can not solve the problem. The only thing I found to keep him asleep is disconnected the network cable from the PC or unplug the network cable from the cable modem. I suspect some service or program he wakes up, but I have no idea of that. Here's what I tried:

  I used powercfg command-line command to see which devices have been enabled to wake up the pc. They were only the mouse & keyboard. They are all two peripheral cables usb. I unplugged each separately before you put the pc to sleep and he will still be awake. I use "last_wake" but I just get '0' and in the event viewer it says "wake source unknown.

  I made sure "allow this computer to turn off this device to save power" has been verified for the network adapter in the power management tab. I also disabled the option in the advanced NIC Properties. I also disabled it in the bios. After having done that and the pc wakes up is still what intrigues me the most when I don't know if I unplugged the NIC in the pc go to sleep for hours until I decided to wake up. It is wired not wireless.

  I have that 'sleep' lit. There are no hybrid sleep or hibernation available mode.

  It is vista business so I don't have a Media Center. Media Player is not enabled for sharing files on the network or to pick them up. Media sharing is turned off, and it's only pc's on my network. Also just in the 'media settings' box is configured to allow the pc to go to sleep in power options.

  I checked the Task Scheduler for tasks that can be set for 'wake up this computer' so it can work, but only one of them has this option. It's for multiple monitors and I unchecked the box and the pc wakes up still. I checked for hidden tasks, and the only one I found that could be the culprit was MS RSS. However, after the removal of this pc still wakes up.

  I don't have a sidebar option.

  Windows Update is set on notify me when updates are available.

  I also did a msconfig & selected 'selective startup '. I have uncontrolled startup programs. The pc is still awake.

  Tried to start the pc in safe mode, but there is no option of sleep available to test if it wakes you up from his sleep in safe mode.

  Last but not least is when the pc is wake up he's going to sleep again within 2 minutes.

  As you can see I tried everything I could think of without much success. Can someone tell me something again or that I have not tried?

  I have no idea what you're trying to do, but here's what I found my problem. I have a motherboard intel. Although I disabled "wake on lan" both vista & bios there was yet a 3rd parameter I was not aware of. He was set apart from the bios or vista. It is a framework of intel in the 'management engine interface' if I remember correctly. It is accessible after the bios option and before loading windows. Once I turned it off my pc stop, out of sleep. So, if you have a motherboard intel, then that is your problem.

• G60-458dx Wireless card is disabled after waking up from his sleep.

  I have a g60-458dx which is less than a year. My wireless card is disabled when I wake the computer from sleep mode and takes me a few minutes fiddling with the wireless, near the power button button to operate.

  I have installed and reinstalled all the drivers, set the power settings and my laptop power mode, but nothing seems to work.

  Any help would be greatly appreciated.

  Well I think I have fixed the problem. HP wireless Assistant fixed somehow. I'm seriously confused but I've never had to install in the past.

  I spent between ubuntu and windows 7 a few good times, and the problem began after about 2 weeks of my second installed ubuntu. I have no idea why, on the eve of the card network wireless became a hard block and I couldn't understand why.

• Windows 8 wifi is not connecting after waking up from his sleep.

  HP Envy 15-3247NR

  Recently upgraded to windows 8 pro to windows 7 and I found that I couldn't connect to any wireless network after that the computer is in mode with 8 'sleep'. I've tried everything. Drivers updated, bios, intel. Everything is as it should be, but no matter what, the wifi option remains grayed out if the airplane mode is enabled or disabled. I really want to solve this problem, please help.

  Hello

  Thanks for your posting in the Microsoft community

  As I read the full question, you did not mention what you have taken to correct the isuse of step
  Basically, this problem happens because of the Wifi configuration

  Go to Device Manager by right clicking on the section of the computer,
  And go to the properties of the wireless Ethernet drivers in device list.
  After going to the last TAB properties will be power management, click on this and you will get two options as

  ""Allow this computer turn off wifi to save energy.

  Just uncheck and try again

  And back here

• BSOD when waking up from his sleep.

  Hi guys!

  I did a clean reinstall of windows 7 64-bit yesterday and now I have a problem with the computer having BSOD when waking from sleep. I installed the drivers and all windows updates offered on the site of Asus.

  ASUS UX31E
  Intel i7 - 2677 M CPU @ 1.80 GHz
  4 GB OF RAM
  ADATA 128GB ATA Device XM11
  Intel HD Graphics 3000

  Here is a link to the minidump files: https://onedrive.live.com/redir?resid=3D69F037CA8FD1FA%21107

  I would appreciate if someone could help me.

  Thanks in advance!

  I replaced avast, but it does not solve the problem. Then, I rechecked the Asus site for all the drivers who could not miss. I installed Intel Rapid Storage Technology driver and looks that it somehow solved the problem. I tried several times to put the computer to sleep and wake up again and it connected normally.

  Hope that the problem is now solved permanently.

  Thank you for your help :)

• Computer does not have a password after waking up from his sleep.

  To start, I have a laptop Windows 8. I have my laptop set whenever I close the lid, it is supposed to go to mode "Eve" and require a password when I lift up. It does not require a password when I lift the lid and I know for a fact that I have a password set for the characters, fingerprints and photograph, and none of them appear. Simply open up like nothing ever happened. Maybe it's because he's going to do nothing when I close the lid, even if I put it in sleep mode. I don't know if I have accidentally deleted a file or changed a setting, or if I have a virus, but it continues to be.

  It's okay, I discovered that it was a virus or something, but now it is deleted.

• Mini Mac not awakened from his sleep by action keyboard or mouse

  My mac mini is not awakened from his sleep by mouse or keyboard action, only a short press of the power button you wake up the mini. Any suggestions for a workaround or fix?

  Try resetting the SMC and the PRAM and then retest. iMac SMC and the PRAM reset

• Computer wakes up from his sleep at night

  Hello

  I have a problem of disruptive reeally with my Windows 7 PC: he wakes up from his sleep to ~ 2 hours every night, I put it to sleep and it wakes up again between 3-04:00. Is it possible to limit this, or to diagnose what executable triggers this?

  Thank you
  Levi

  Windows performs many tasks during the night, including the work of backup, hard drives and other degragmenting.  These are usually the root cause of the alarms.

  You can begin troubleshooting by opening an elevated command prompt * and type powercfg /lastwake to see what woke up the last computer.

  * To open a command prompt, type cmd in the Start Menu, and then press Ctrl-Shift-Enter.

  If it was useful, you can vote by clicking on the green triangle. If it solves the problem, click on propose as answer. Thank you!

• Fingerprint reader does not work after the laptop awakens from his sleep.

  Pavilion DV6-6c15nr

  Windows 7 Home Premium

  Fingerprint reader works fine when the computer starts. The drive works fine if I manually lock the system. When the computer enters mode "sleep" through inactivity, then wakes up from his sleep, the fingerprint reader does not work. The player power led does not illuminate, the player does nothing if I drag a registered fingerprint. I must select use authentication information and enter the Windows password. Device Manager says device working properly but it doesn't help. I checked for BIOS, Windows and driver updates but I run in all aspects.

  Hello

  Uninstall the software and current driver for the fingerprint reader.

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  Download and install the latest driver from here.

  Download and install the latest version of the software from here.

• Satellite L850 wakes up from his sleep - intermittent

  Parameters:
  Start button / stop switch to standby.
  Space touchscreen or touchpad he wakes.

  It works normally, several times a day I SLEEP there and he wakes up ok. But 2 times this week, she didn't answer touch keyboard, NOR-press and hold (10 seconds) the powerbutton.

  Keyboard was dead, (NUMLOCK ON, and it does not change the button.) Same thing with the SHIFT key.)
  HDrive looks like it is constantly blowing fan also.
  All three lights permanently, (white orange sector "on" indicator and orange wifi connected).

  First time I unplugged the sector and pulled out the battery. Immediately put the batt in and he started upward with the power button.

  Second time it happened I just unplugged the power cable and tried the power button, which works with «Windows does not shut down correctly...» "but starting ok anyway.

  Toshiba Satellite L850 (PSKDLA-09200R)
  Win7home prem sp1
  A month of age

  Brian
  Auckland, New Zealand

  Hello Brian

  This path is not easy to say why this happen and why your laptop is blocked. From time to time to check regularly stop and don t stand-by option use for an extended period of time.

  We don t know what additional software do you use and what is running in the background.
  If you have noticed this problem a few days ago, try to roll back BONE several days back just to see if the problem persists.

• All my desktop icons disappeared from my Windows 7 Desktop and toolbar on the bottom is misssing

  All my desktop icons disappeared from my Windows 7 Desktop and toolbar on the bottom is misssing. all I get is my pic of screensaver. I can't draw anything.

  Oh! If you think it's a Virus/Malware then take your HARD drive internal to another machine and have it is scanned with a good Antivirus updated. If nothing else works the hard way is to format your machine.

  :(

• I use LR 6.5 on an iMAC. Files RAF Fuji originally, I imported from an SD card worked and exported in the form of PSD and then after saving the files on an external hard drive RAF erased from Lightroom. I now want to import some RAF b HD files

  I use LR 6.5 on an iMAC. Files RAF Fuji originally, I imported from an SD card worked and exported in the form of PSD and then after saving the files on an external hard drive RAF erased from Lightroom. I now have to import some RAF of the HD files but LR shows them as dazed out and said that they have already been imported when I hover over the thumbnail. I have this problem when importing files in the same HD Canon CR2, and who have been treated exactly the same. Anyone got a clue as to why this is happening? Thanks, Phil

  Hi Phil,

  If Lightroom then reads these as duplicate files, it shows that they are already present in your Lightroom Catalog.

  You can search by file name and check if the image is present in your library.

  Kind regards

  Claes

• MacBook pro wakes up from his sleep since uptade

  My macbook pro 15 inches from the end of 2010 will not wake up after sleep since I've updated to the latest el capitan 10.11.5 system.

  The keyboard doesn't light to the top and rest of this way but the screen remains dark. Stop down and restarting is the only way.

  In addition, since upgrading my trackpad get slow sometimes and a click solves it. but its weird!

  any ideas? Thank you very much!!

  Could you please post an Etrecheck report? It is a perfectly safe way to give an overview of your current system: http://etrecheck.com

• HP Pavilion 13-a113cl: computer HP Pavilion laptop won't wake up from his sleep by the keyboard or mouse

  I don't know if it is good advice to post this question in, but I'm having the same problem with two a113cl-13 laptops HP Pavilion running Windows 10 Pro (64-bit). The issue has to do with the awakening of the machines to sleep using the key on the keyboard or the mouse. I'm not having problems with them to wake up from sleep using the button of power or when I open or close them.

  I checked the BIOS and power settings are not there. (Version of BIOS F.32)

  I have checked boxes to allow devices to wake the computer in the management section of power without success.

  I changed the Intel MEI driver with 9.5 instead of 11 which is usually installed without success.

  I don't know if there is a problem with the BIOS and Windows 10 or something driver associated. Any suggestions would be greatly appreciated.

  Hello @jpk717,

  Thanks for the information!

  Since you have formatted the drive, you must be unable to return to the old operating system, unless you use recovery media.  You can find your product here recovery media:

  USB - Windows 8.1 Recovery Kit 64B

  You can try to use the recovery media to install the original operating system and see if the problem is resolved.  If you choose not to go down this path, you can try to re - install Windows 10, using the media creation tool.

  I hope this helps.

  Have a great weekend!

• T410 fails to wake up from his sleep with the installed 2nd hard drive?

  Since I installed a second hard drive in my T410, a 250 GB Hitachi drive, my machine can't seem to wake from sleep (sometimes)... So, I have to do a hard reset.

  I had the same problem without the 2nd disc when I tried to use the HD password in BIOS and discovered that it was something to do with the disc Crucial M4 I use. But this same problem happening now since using the 2nd disc slot.

  Any ideas? I really like the extra storage space and won't remove based on this problem.

  Well it seems that the problem was caused by the version of the firmware for the SSD I installed it.

  The problem has been solved by updating the M4 Crucial SSD with the latest firmware...

  .. .and it solved the HD1 password issue too.