W520 WiDi configuration steps

Similar Questions

• The configuration step of the calendar after the call to DAQm angular encoder, takes a lot of time vey even to 1000 samples per second. No idea why?

  I use an encoder in quadrature with DAQmx 6259, the call to read the outputs of the meter is slow, much slower than the sampling rate? No idea why?
  Thank you

  Hello Roxanne,

  In the title of this thread, you mention that the calendar configuration step takes a long time.  Is now called node configuration several times in your code?  You may find that your code runs faster if the channel configurations and the task doesn't occur once.

  Our example of the expedition, ' counting digital Events.vi ' may be of interest to you.

  Can be found by browsing our example search tool:

  'Help' examples

  Once opened, the example Finder you can find this example by browsing:
  "" material input and output"DAQmx" counter measures "County Digital Events.vi

  Best regards.

• Updates to configuration - step 3 of 3 (over and over again)

  After windows vista update I get this message that I reboot: "updates of configuration - step 3 of 3-0%" (translated from Danish: o). After awhile, it restarts and I get the same message again. " Can someone help me, please?

  Marianne2010
  See if you are able to boot mode safe mode with networking (one of the boot advanced options).  If this isn't the case then start with your Vista support and select the option to repair your computer.  Then do a system restore to a date prior to the update.  Once you are able to start and access the internet, then install this update: KB937287.  Once it is installed, and then run Windows Update. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• to use the help of a friend (distance) the configuration steps should I take?

  Hello

  use the help of a friend remotely, configuration steps I have to take?

  1. I see nothing in the services to enable

  2. I don't see anything in the windows firewall so that it

  3. what one thing I see in the computer properties in the Advanced section, I can help vink (enable) of distance.     Wil only be this option enough to get help from a friend or remotely?

  My second question is

  I know there are third party software to make contact with the client computer (remote assistance).

  are there any simple quiet easy to use for customers and third party free software, if so wat is the name of it?

  Thank you

  Johan

  Hi Johan

  You can use built-in Windows 7 Remote Assistance.

  What is Windows Remote Assistance? :

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-remote-assistance#1TC=Windows-7

  There are also third-party products.

  Access, manage and support computers remotely:

  https://secure.LogMeIn.com/

  TeamViewer:

  http://www.TeamViewer.com/en/index.aspx

  Concerning

• OIM11g R2 PS2 Installation - problem to the IOM configuration step

  Hello

  I install OIM11gR2 PS2 to computer virtual RHEL5.4 installation. And I followed the steps of fixation with success. And now the configuration step IOM after making the field WL creation and facts Admin Server and running upward.

  In Assistant de Configuration IOM, step 4: screen of the WebLogic Admin Server.

  I have entered the following values:

  URL of the WebLogic Admin Server: t3: / / < xxxx >: 7001

  Username: weblogic

  Password: xxxxxx

  After you click Next, it is not further.and of the Forum got stuck at step 4 for more than an hour. I tried several times but the same problem persists.

  Could someone please help me out here.

  Enjoy a quick help.

  Thank you

  Maryse

  I think that your SOA server is not upward. Early SOA server and then click Next. Make sure that before you run the Configure Server Admin and SOA are rising.

  Kind regards

  ARI

• GC installation fails on the WHO with NodeManager Configuration step

  I try to install OEM Grid Control and I'm having some trouble to make it past step in the installation of the Configuration of the WHO. I'm not very familiar with Oracle products. I finished all the configuration steps listed in the documentation, and in order to solve a problem earlier, I deleted the Keynectis and Telesec certificates since the cacerts file java keystore. NodeManager is run as a service, even if I think that the Setup process starts a new instance because it cannot connect to the service. I was also unable to connect to the service through the nmConnect WLST function, if it is possible my settings are incorrect. If the only problem is that GCDomain is not saved in the file nodemanager.domains, I'm not sure what I'm doing wrong, because I put it in the nodemanager.domains file located at C:\Oracle\Middleware\wlserver_10.3\common\nodemanager:
  
  ---
  #Domains and directories created by the Configuration Wizard
  #Fri 22 April 15:23:16 EDT 2011
  wl_server=C\:\\Oracle\\Middleware\\wlserver_10.3\\samples\\domains\\wl_server
  MEDREC-Spring=C\:\\Oracle\\Middleware\\wlserver_10.3\\samples\\domains\\medrec-Spring
  GCDomain = C\:\\Oracle\\gc_inst\\user_projects\\domains\\GCDomain
  MEDREC=C\:\\Oracle\\Middleware\\wlserver_10.3\\samples\\domains\\medrec
  ---
  Note: the file paths are correct and using escaped slashes, as appropriate, but this message board system turns the last double backslash in a line break. I can't find any html solution that works, so just take my word for it
  
  I restarted NodeManager after making the change as well. Any help would be appreciated. Thank you.
  
  Details:
  Machine - Windows Server 2008 x 64
  DB - 11 GR 2
  WLS - 10.3.2
  GC - 11.1.0.1
  
  Install the Log:
  ...
  FINE: Connection to the node Manager... April 22, 2011 15:23:19 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: April 22, 2011 21:23:19 CEST > < opinion > < security > < BEA-090898 > < without taking account of the approved CA 'CN = AC KEYNECTIS ROOT, OU = ROOT, O is KEYNECTIS, C = EN ". Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. > April 22, 2011 15:23:19 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: April 22, 2011 21:23:19 CEST > < opinion > < security > < BEA-090898 > < without taking account of the approved CA ' CN = T-TeleSec GlobalRoot class 3, OU = T - Systems Trust Center, O = T - Systems Enterprise Services GmbH, C = OF. Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. > April 22, 2011 15:23:19 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: April 22, 2011 21:23:19 CEST > < opinion > < security > < BEA-090898 > < without taking account of the approved CA ' CN = T-TeleSec GlobalRoot class 2, OR = T - Systems Trust Center, O = T - Systems Enterprise Services GmbH, C = OF. Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. > April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: This Exception occurred at Fri Apr 22 15:23:20 EDT 2011. April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: weblogic.nodemanager.NMConnectException: Connection refused: connect. Cannot connect to NodeManager. Check that they are running to win2008x64-2:7, 401. April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: java.net.PlainSocketImpl.socketConnect(Native Method) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: java.net.Socket.connect(Socket.java:525) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: weblogic.nodemanager.client.SSLClient.createSocket(SSLClient.java:38) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:227) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:199) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:205) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:52) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:175) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:168) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: java.lang.reflect.Method.invoke(Method.java:597) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyReflectedFunction.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyMethod.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyObject.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyObject.invoke(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: to $3 org.python.pycode._pyx2.nmConnect (< iostream >: 118) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: to org.python.pycode._pyx2.call_function (< iostream >) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyFunction.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyObject.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: to org.python.pycode._pyx41.startNM$1(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\start_server.py:20) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: to org.python.pycode._pyx41.call_function(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\start_server.py) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyFunction.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: to org.python.pycode._pyx39.f$0(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\create_em_infra.py:74) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: to org.python.pycode._pyx39.call_function(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\create_em_infra.py) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.Py.runCode(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.util.PythonInterpreter.execfile(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: weblogic.management.scripting.WLST.main(WLST.java:131) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: java.lang.reflect.Method.invoke(Method.java:597) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: in weblogic. Run WLST.main(WLST.java:29) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader
  FINE: Wed Apr 22 15:23:20 EDT 2011 Apr 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: Node Manager down from this April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader works
  FINE: Not connected to the Node Manager Apr 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: Launch NodeManager...
  April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: Properties: {ListenAddress=win2008x64-2,ListenPort=7401,NodeManagerHome=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239,StartScriptEnabled=true,StartScriptName=startEMServer.cmd}.
  April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: Command: C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\bin\javaw.exe - classpath "C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\lib\rt.jar; C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\lib\i18n.jar; C:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\patch_oepe1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\JROCKI~1.5-3\lib\tools.jar; C:\Oracle\MIDDLE~1\utils\config\10.3\config-launch.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar; C:\Oracle\MIDDLE~1\modules\features\weblogic. Server.modules_10.3.2.0.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar; C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0\lib\ant-all.jar; C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1\lib\ant-contrib.jar; C:\Oracle\Middleware\oms11g\sysman\jlib\emConfig.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf-API.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\jrf-WLST.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.odl_11.1.1\ojdl.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.odl_11.1.1\ojdl2.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.dms_11.1.1\dms.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.dConfig-infra_11.1.1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.fabriccommon_11.1.1\fabric-common.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.xdk_11.1.0\xmlparserv2.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.xdk_11.1.0\xml.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.WSM.common_11.1.1\wsm-pmlib.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.WSM.common_11.1.1\wsm-policy-core.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.WSM.common_11.1.1\wsm-secpol.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.WSM.common_11.1.1\wsm-dependencies.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. WSM.policies_11.1.1\wsm-Seed-Policies.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.webservices_11.1.1\orawsdl.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.webservices_11.1.1\mdds.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.webservices_11.1.1\ws_confmbeans.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\org.Apache.Commons.digester_1.7.jar; C:\Oracle\MIDDLE~1\ORACLE~1\... \modules\javax. XML.bind_2.1.1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\... \modules\javax.activation_1.1.jar. C:\Oracle\MIDDLE~1\ORACLE~1\... \modules\javax. XML.stream_1.1.1.0.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.http_client_11.1.1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jmx_11.1.1\jmxframework.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jmx_11.1.1\jmxspi.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.dconfigbeans_11.1.1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share.CA_11.1.1\adf-share-base.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share.CA_11.1.1\adf-share-ca.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\adflogginghandler.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\adfsharembean.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\commons-El.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\jsp-El-API.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\oracle-El.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\auditwlst.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\sslconfigwlst.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\oamap_help.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\ossoiap_help.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\jps-WLST.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.auditprovider_11.1.1\jps-WLS-auditprovider.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-manifest.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-MBeans.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-upgrade.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-patching.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADF-sh~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\mdswlst.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\AUDITW~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jps-WLST.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jrf-WLST.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAP_~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAUT~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\ossoiap.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OSSOIA~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\SSLCON~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\wsm-WLST.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbembedded57.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbtools57.jar"weblogic. NodeManager '-v '.
  April 22, 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:21 > < INFO > < domains file: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains > 22 April 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:21 weblogic.nodemanager.server.NMServerConfig initDomainsMap 22 April 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: INFO: loading areas file: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains April 22, 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:21 > < WARNING > < domains file not found: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains > 22 April 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:21 weblogic.nodemanager.server.NMServerConfig initDomainsMap 22 April 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: WARNING: areas file not found: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains April 22, 2011 15:23:22 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:22 > < INFO > < store loading identity keys: FileName=C:/Oracle/MIDDLE~1/WLSERV~1.3/server\lib\DemoIdentity.jks, Type = jks, PassPhraseUsed = true > 22 April 2011 15:23:22 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:22 weblogic.nodemanager.server.SSLConfig loadKeyStoreConfig April 22, 2011 15:23:22 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: INFO: loading storage identity key: FileName=C:/Oracle/MIDDLE~1/WLSERV~1.3/server\lib\DemoIdentity.jks, Type = jks, PassPhraseUsed = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 > < WARNING > < folder properties for configuration manager node 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' not found. Using the default settings. > April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 weblogic.nodemanager.server.NMServer < init > 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: WARNING: configuration properties manager node of the file 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' not found. Using the default settings. April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 > < INFO > < Saving configuration properties node manager 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' > 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 weblogic.nodemanager.server.NMServer < init > 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: INFO: save the configuration properties node manager 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: node Manager v10.3 April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: Configuration settings: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: NodeManagerHome=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239 April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: ListenAddress = win2008x64-2, April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: ListenPort = 7401 April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: ListenBacklog = 50 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: SecureListener = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: AuthenticationEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: NativeVersionEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: CrashRecoveryEnabled = false April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: JavaHome=C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: StartScriptEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: StopScriptEnabled = false April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: StartScriptName = startEMServer.cmd April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: StopScriptName = April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: LogFile=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.log April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: LogLevel = INFO April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: LogLimit = 0, April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: LogCount = 1 April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: LogAppend = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: LogToStderr = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: LogFormatter = weblogic.nodemanager.server.LogFormatter April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: DomainsFile=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: DomainsFileEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: StateCheckInterval = 500 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: QuitEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: Interface = April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: NetMask = April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: UseMACBroadcast = false April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: DomainRegistrationEnabled = false April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: mappings of domain names: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 > < INFO > < Secure socket listener started on 7 401, host WIN2008x64-2/192.168.182.135 port > April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 weblogic.nodemanager.server.SSLListener run April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: INFO: Secure socket listener started on port 7 401, host WIN2008x64-2/192.168.182.135 April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: Successfully launched the Node Manager. April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: The Node Manager process runs independent of the WLST process. April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: Exit WLST won't stop the Node Manager process. Please see April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: to the Node Manager records for more information. April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: Node Manager logs will be under C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239 April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: Connection to the node Manager... April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:41 > < WARNING > < directory domain read when Configuration Error > April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: weblogic.nodemanager.common.ConfigException: the field 'GCDomain' to 'C:\Oracle\gc_inst\user_projects\domains\GCDomain' was not saved in the file nodemanager.domains and dynamic domain registration is not supported. Please register the domain in the file nodemanager.domains. April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: to weblogic.nodemanager.server.NMServer.getDomainManager(NMServer.java:257) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: to weblogic.nodemanager.server.Handler.handleDomain(Handler.java:224) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: to weblogic.nodemanager.server.Handler.handleCommand(Handler.java:108) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: to weblogic.nodemanager.server.Handler.run(Handler.java:70) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: at java.lang.Thread.run(Thread.java:619) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
  ...

  Vijay,

  Your correct. Even with regard to the OEMGC 10 g Oracle still doesn't have a Windows 64 bit for OEMGC 11 g version.
  It sometimes means that are all companies except 1, the GC server 64-bit Windows servers.

  Eric

• Net M4110x - Net management and iSCSI. Clarification of the configuration steps. The documentation is at best ambiguous.

  Hi guys,.

  I'm having a lot of trouble to translate what I know PS6000 table to the new M4100x.  Here's what I'm building:

  

  I want my iSCSI traffic that is completely isolated from all other traffic, and I want to use the CMC network to run the Board.  It must be a simple configuration, but Dell documentation for which is worse than useless.  It confuses and everyone who's read it confuses.  Why is this?

  It seems that I should be able to assign the IP addresses of management using the MCC according to DELL:

  Step 1.  Initialize the storage

  * Once in the CMC right-click on storage open storage gui initialization.

  * Member name: MY_SAN01
  * Member, IP: 192.168.101.10
  * Member gateway: 192.168.101.254
  Group name: MY_SAN
  Group IP address: 192.168.101.11
  Group of Memebersip password: groupadmin
  * Password Admin group: groupadmin

  It sounds simple enough, and when I apply this I guess I will be disconnected my M4110x simply because it currently resides on a separate network (net 2 in the image above).  Now how to set up the IP address of my CMC (net0 in the picture above) network management?

  Step 2.  Set ip management port

  According to the documentation of Dell, I have:

  To set the management port:

  * Open a telnet (ssh) session on a computer or console that has access to the PS-M4110 range. The array must be configured beforehand.
   
  * Connect the PS-M4110 modules using the following racadm command: racadm Server 15 connect
   
  * Connect to the PS-M4110 array as grpadmin

  Once I am in:

  Activate the management controller ports using the following commands in the CLI:
  0 > member select MY_SAN01
  1. (array1) > eth select 1
  2. (array1 eth_1) > 10.10.10.17 ipaddress netmask 255.255.255.0
  3. (array1 eth_1) > upward
  4. (array1 eth_1) > exit
  5. (array1) > grpparams
  6. (array1 (grpparams)) > network management-ipaddress 10.10.10.17

  (array1 (grpparams)) > exit

  My interpretation is correct?  Now my questions:

  1. in step 2. SubStep 1 - How can I know what ethernet interface to use?  Step 1 automatically assume eth0?

  2. am I correct in using the same IP address for both step 2 - substep 2 and substep 6?  Or do I have to assign a different IP address for these?  10.10.10.18 maybe.

  3. step 2 - substep 6, it doesn't seem to be that a network mask is that correct?

  4. comparison of the ps6000e - I set up an IP address for each controller (so 2) and then assigned an IP address for the group.  It's 3 IP addresses.  For this M4110, it seems that I have only one controller.  Is this correct?  The specifications make a point that there are 2 controllers.  What happened to the IP address of the controller of the 2nd?

  CLOSE-UPS

  I intend on building a VMware cluster using the algorithm of multiple paths of DELL and I built it to the DSC, but a technician Dell put in place the table initially and have not set up a dedicated management port.  Required configuration routing traffic on the net iSCSI management.  It is not recommended, and I don't want to set up this way.

  Currently, he is a blocking problemand I need to go beyond this ASAP.  I work with a large system integrator in Texas and plan on the order that these systems built this way on their part.  This means that I must be able to explain to them how to proceed.  This issue is standing in the way of progress, and I really hope I can get a satisfactory response from this forum.  Thanks for any helpful answers.

  I think I have the answers to my own questions:

  1. YES.  Step 1 automatically assume eth0.  There are TWO Ethernet interfaces and eth1 is disabled by default, and unless you use step 2 to set the management port this second Ethernet interface is never used.

  2. No. I can't use the same IP address for both lines.  In lower level 6 I need to use a different IP address on the same network 10.10.10.18 would work fine.

  3. YES.  It is correct.  Lower level 6 assumes the network mask that I have included in the point 2.

  4. it's tricky.  There is NO WAY to configure Active/active on these tables.  There are 2 controllers, but one "still asleep," unless the other fails.  Actually, the IP address is assigned to an Abstraction Layer, it maintains.  When fails another controller "awakens" and just starting to accept traffic and it doesn't care what its IP address.

  Another point.  Now that my table is initialized and my interfaces are configured, I need to know what IP address to point my ESXi hosts for their storage.  Use the IP address of the group assigned in step 1.  It is 192.168.101.11 (there is typo in the original post).

• Pre EAS configuration steps

  First of all my environment:

  Windows Server 2008 running Exchange 2007 SP1

  Auto generated certificates (I didn't spit the outrageous fees public certificate yet)

  Palm Pre WebOS 1.04

  I had a devil of a time getting EAS to work, and I thought I'd share the steps we have taken to get there... Here are the General steps meant to help you where you need to go, I am not guaranteeing accurate and click screen.

  (1) make sure that you have a certificate generated by your server, yes it must have the name of your e-mail server either mail.domain.com in the certificate.

  (2) export certificate EXCHANGE, nowhere else, not IIS, not IE.  Follow this link to export the certificate of the Exchange shell and note that the user name field is not used for something in this field will not matter, but the password field must adhere to your strategy of password, so make sure that you meet the requirements of minimum password when you enter a password for your exported certificate file.  http://TechNet.Microsoft.com/en-us/library/bb310778.aspx

  (3) followed the others posts on how to save the certificate on your pre.  Bottom line, connect to your pc via usb cable, USB drive, do a right-click on the cert file and send to, Palm Pre by car.  Disconnect before.  Then follow the steps to accept the certificate.

  (4) on the Exchange Server, make sure that Microsoft Active Sync is set up and configured to use SSL (Server Configuration/Client Access, click the Active Sync).  You must enable SSL under IIS to your Web console. You're in IIS and Exchange Management Console services manager.

  (5) right click on the Active Sync service, click Properties.  Make sure that your URL is correct and that your firewall/router is configured to pass 443 traffic to the IP address of web internal URL listed here on the property page.  Mine is in this format: https://mail.domain-name.com/Microsoft-Server-ActiveSync

  6) click on the Authentication tab.  LEAVE THE BOX CHECKED for basic authentication... I had this not controlled and once we had the certificate and configured routing this was our last issue.

  7) go to your pre, make sure the cert is loaded with confidence.  Then configure your Exchange account for Regional service by following the steps.  You should be good to go!  I hope this helps.

  Matt Haywood

  Matt,

  First of all, I got it to connect today.

  Yes, I was able to export the certificate of the Exchange Server with the .cer extension and install this on the pre.  So that the research on this more, I was convinced that the name of the subject of the certificate should match the field in my mail server address, I tried to connect to.  So, I thought that the name turned to the public in the mail server entry (for example, https://mail.mydomain.org) would not work with a certificate which had a name of topic for an internal domain name (for example, mail.mydomain.local)

  Another forum discussions seem to indicate clearly that the Palm software is not read topic several other names, no more, even if turned to the public name is included in the San of the self-signed certificate.

  These discussions have also suggested that the certificate that is really necessary is that of CA.  So, I opened the MMC on our mail server. Add the Certificates snap for the computer account; drill down to the root Certification authorities to trust; Open the CertAuth certificate and exported it in the same way (extension .cer base64, no key or password); This charge on the Meadow while leaving the other installed certificate.

  He signed the and immediately started the synchronization.

  I will experiment a little more to see if only one certificate is needed, as some authors have claimed.  I also wanted to play with a third-party domain certificate that we have, I understand also pose problems for owners of pre (since it is a generic cert instead of a specific for the mail server).

  Moreover, my Pre came with version 1.0.3 of the software and I have not yet downloaded 1.0.4.

  Thanks for your great post, because it helped me to get this working.

  Rick

  Message edited by rick c 13/07/2009 22:57

• OID / LDAP configuration steps

  10204 on AIX version
  I need the LDAP.ora OID of installation for the 1st time, need help...
  
  Here are the steps that I intend, do me right if I'm not...
  
  1. configure the new db
  2 Configure OID on new db to next
  http://www.Oracle-base.com/articles/9i/OracleInternetDirectory9i.php
  3 configure the management of network entry ldap.ora & dbs with netmanager
  
  ---------------------------------------------------------------------------------------------------------
  
  2nd I'm trying to invoke oidca just to test how it works, please give me example of syntax for oidca, as
  
  $ORACLE_HOME/bin/oidca oidhost = myhost = dn? mode =?

  What version of Oracle Identity Management you trying to install?

  Anyway, please follow the instructions in Metalink Note 564174.1 Oracle Application Server 10 g (10.1.2) requirements for Linux: OEL 5 and RHEL 5

• Discoverer 10 g configuration steps

  Hi all
  
  My company is implementing discoverer 10g. A question I have is that is it possible to have a configuration that requires users to change their password (password reset option) the first time, they connect ino disco 10g. Probably its going to be more. I've seen other companies have this configuration.
  
  Anyone remember all the steps required for the implementation of it.probably, we will need a strategy of password on the databas and some on the application server configuration changes, but I'm not too sure.
  
  Any help is appreciated to deepely.
  
  Thank you.

  Hello

  You can expire the password of users in the database, but then the user won't be able to connect in discoverer at all. Discoverer has no built in mechanism to change the database password.

  You can implement your own password expires the mechanism that would allow users to connect but doing nothing until they changed their password by using a custom workbook. Quite complicated to set up, you must use contexts, connection triggers, a bit of PL/SQL and perhaps VPD.

  Rod West

• s update configuration step 3 of 3 0% loop

  I am stuck in a loop trying to configure the updates, restart & go everywhere.  I am running Windows Vista 64 bit, I tried the safe mode, last known good configuration and none of this works.  What to do now, without losing any of my info on hard drive?

  Mary,

  Please see: the update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Is this an accurate description of what you see? If Yes, have you tried to restart with the "Windows installation disk and then use the repair feature"?

  MowGreen Services consumer safety update

• 500 Post Patch ODI Configuration steps

  Hello

  I applied the patch 500 to 11.1.2.2.300 environment.

  I do post Configuration procedure

  Import the following projects of odi/11.1.2.2.00/workrep INSERT_UPDATE mode:

  - PROJ_AIF_File_Project.xml- PROJ_JDE_Adapter_Project.xml

  
  

  I chose the project to import

  In select them files to import, there is no xml to import but readme indicates that we have to import PROJ_AIF_File_Project.xml- PROJ_JDE_Adapter_Project.xml.

  When I select AIF_FILE_PROJECT it's

  
  

  We need to select Yes, then continue or I'm doing wrong. Help, please. My procedure is correct?
  

  Hello

  If you select AIF_FILE_PROJECT only this project xml files will be copied.

  Basically these files replaced with the patch the patch.500 put a few new files instead of old one so you just need to import the project that's all.

  the project name, you have to select that all xml files are present which will import.

  Thank you

  Pratik

• Help with a few desktop esx4i server configuration steps

  Hello

  I'm currently finishing my post powershell script config but I have 2 questions/problems I'm trying to solve.

  The first is:

  Is it possible to reboot the host to middle of a configuration script and the script wait until the host is restarted?  I want to set up all my networks, reboot the host to ensure that all records correctly.  finish the rest of my script.

  My second quesiton/question is how do vCLI commands powerCLI?  We have HP blades so after esx4i installation, you must install HP CIM stuff.  It's pretty easy to do and we treat them via the vihostupdate.pl script in the vCLI.  My quesiton is how can I run it and call vihostupdate.pl from powershell script?

  Thank you

  Alex

  Carter is too modest, the new generation of PowerCLI also contains a Restart-VMHost cmdlet.

  Which simplifies the part of your first question.

• After updating Windows computer stops at the configuration in step 3 of 3, 93% - HELP

  After installation of Windows from one day to the next update, my computer will configure the update.  It stops at the step 3 of 3, 93%, stops, goes to the top.  The same appears configuration step 3 of 3 screen, 93% and stops.  What can I do?  Thank you

  Hello Imaco,
  Thank you for visiting the Microsoft Answers forum.
  When the computer boots press F8 until you see the Startup Options and select last known good configuration.

  Thanks, Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Step how to configure ASA 5500 Series Security Services Module-10 (model: ASA-SSM-10)

  Dear support,

  I need to configure Security Services Module-10 (model: ASA-SSM-10) on my ASA 5510 firewall. Could you provide configuration step and how to connect to the module?

  Here is the information on the module

  ciscoasa (config) # sh Details of module 1
  The details of the Service module, please wait...
  ASA 5500 Series Security Services Module-10
  Model: ASA-SSM-10
  Hardware version: 1.0
  Serial number: JAF1115066U
  Firmware version: 1.0 (11) 2
  Software version: 1.0000 E1
  MAC address range: 001a.e268.5aa9 to 001a.e268.5aa9
  App name: IPS
  App status. : to the top
  App status. / / Desc:
  App version: 1.0000 E1
  Data of aircraft status: Up
  Status: to the top
  Mgmt IP addr: 133.1.9.144
  Web to MGMT ports: 443
  Mgmt TLS enabled: true

  your help is very appreciate.

  Thank you

  Best regards

  Hi Sothengse,

  Please find the samlpe on AIP SSM module configurations. You can go through this to begin with.

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  https://www.YouTube.com/watch?v=FgYU5ZXwk4g

  Concerning

  Knockaert