W530 HW Radio HIDDEN driver Win 8.1 silent installation

I try to get the Lenovo HID HW Radio driver to install in silent mode on Windows 8.1 x 64.

According to the Readme for this file, you use setup.exe/k - SMS

This does not work for me. He always brings the box installation dialog asking for the language and then having to click next to install.

I managed to install the driver of management power in silent mode and its switch was setup.exe /s - sms

I tried as well as for it with no luck.

Other ideas for this one?

Thank you

Matt

You can try this:

Setup.exe/SP-/ VERYSILENT/NORESTART /SUPPRESSMSGBOXES

Tags: Lenovo Products

Similar Questions

  • HP elitebook 840 g3: need driver Win PE for hp elitebook 840 g3

    Hello

    I need driver Win PE for hp elitebook 840 g3.

    I download ftp://ftp.hp.com/pub/softpaq/sp73001-73500/sp73204.exe

    But I don't have the driver of WinPE.

    Where I can finf them?

    Thank you

    HP Windows PE 3.0 Client x 86 and x 64 package driver

    http://FTP.HP.com/pub/caps-SoftPaq/CMIT/SoftPaq/WinPE3.html

    64 bit

    sp71913\hp_dt_nb_wks_1.05\x64_winpe3\network\intel\P00KEKB2\Flat\Win7-x64\E1D62x64.inf

    sp71913\hp_dt_nb_wks_1.05\x64_winpe3\network\intel\P00KGXB2\Flat\E1D\E1D62x64.inf

    sp71913\hp_dt_nb_wks_1.05\x64_winpe3\network\intel\P00JPKB2\Drivers\E1D62x64.inf

    32 bit

    sp71913\hp_dt_nb_wks_1.05\x86_winpe3\network\intel\P00KEKB2\Flat\Win7-32\E1D6232. INF

    sp71913\hp_dt_nb_wks_1.05\x86_winpe3\network\intel\P00KGTB2\Flat\E1D\E1D6232. INF

  • Serial port PCI - P500, lack driver win 7-64

    Win 7-64

    I ran the Upadater system from Lenovo and it shows no missing driver. I tried to install the driver of Intel AMT and it indicates that it is already installed. Someone will direct me to the correct driver?

    hardware ID: VEN 8086 DEV 8D3D

    False alarm! I thought I saw in PC #1 me after not being not able to find the missing driver {it's a new installation} I decided to pass and run updates - after all the updates, I come back to the PC and the exclamation mark is no longer there so I thought updates it's done.

    Now on PC #2, mngr. Unit the exclamation is still there so I check the updates and it says win is up-to-date, so what gives...? I'm going where I unzipped the files of the AMT, run the Setup file, select both boxes repair, reboot and the exclamation mark is still there. OK, so run the installation again but this time of option buttons I select Remove then reboot, restart the installation follow the installation instructions and that's it, all the drivers are now installed

  • Error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer.

    Original title: trying to download

    WinXP SP3, Security Scan run and d/ld: error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer. What to do now would be much appreciated.

    Also have a related problem about MS Maliciouws software removal tool. For download, but read in the KB that: in XP, the vacuum cleaner will remove the malware, but doing so may trigger the File Protection Win with damages to my operating system.  the tool will attempt to repair the damage, but to rehabilitate prior to infection, that I need to insert the CD of Win. As my computer came with Windows preinstalled, I do not have a disk and will not take the risk of damage, that I can't fix. Do I not download or not... ? Another solution... ?  I also fear that this tool could settle into the routine Win Update and need guidance on the prevention of this facility, if possible, or what to do if it cannot be prevented.

    It can have nothing to do with any of the foregoing. " I'm relaying only because it occurred during the same mission of update: had msg of error that Win Firewall has not been set as a default, which reset, but found this hidden file when searching for the Protection of the customer: "Win 32/Hackdef' - it was a config with the extension ini file and was deleted by Scan."

    Thanks a lot for any assistance.

    scate 39

    Hello

    ·         You have Microsoft Security Essentials on your computer?

    If you have windows installed on your computer security essentials, then you will not be able to install Windows defender. Windows Security Essentials has antispyware component installed.

    You get the error because you have installed MS Security Essentials, which has its own function to antimalware. You don't need or want to install Windows Defender, too. Leave MS Security Essentials installed and do not turn it off.

    See also:

    You can turn on or turn on the firewall in Windows XP, please see the link below:

    http://support.Microsoft.com/kb/283673

  • Please help find the driver win 7 for sharp AM-400 MFP

    I have Windows XP driver for my Sharp AM - 400 multifunction printer. I tried to install it in different compatibility mode to work on win 7 but without success.  Please help find the driver win 7 for sharp AM-400 MFP. Regarding the LEP

    Think that its too old. I think its time to get another printer

  • Win 7 / X 64 installation BlackBerry_JDE_PluginFull_1.1.2.201004161203 - 16 has no Blackberry plugin

    After installing Eclipse with the plugin, I launch Eclipse, but there is no context menu for Blackberry JDE.  It is absent from the user interface completely.

    I chose the mode where no pre-existing Eclipse is needed, just give JDE_PluginFull an empty folder, and it is supposed to do its stuff.

    I have disabled UAC (cursor down) so it should not be a problem of the UAC

    Win 7 / X 64 installation BlackBerry_JDE_PluginFull_1.1.2.201004161203 - 16 has no Blackberry plugin

    Well, after fussing and fuming, I found that Windows 7 and BlackBerry Java plug-in for Eclipse 1.1 Beta Walkthrough that I followed to the "T" and got a fully functional with the BlackBerry Java plug-in eclipse.

    What (I think) they critical missing ingredients were to follow my footsteps

    1. do not install the 64-bit JDK, use only a JDK 32-bit on Windows 7 / X 64

    2. start Eclipse in emulation mode Windows XP SP3 (properties--> compatibility in the Explorer on Eclipse.exe)

    3. changing permissions to full control on the C drive (maybe? I can't say for sure, but I did as stated on the walkthru).  The more adventurous should create a mini-partition for use by Eclipse and do it now to avoid compromising security in the long term.

    Thank you all

    -Victor r. Volkman

  • X100e win xp pro usb installation problem

    Hello everyone, I'm new here and I'm sorry for not having introduced myself properly drunk it is an urgent situation.

    A few days ago, I bought the Netbook from Lenovo x100e

    Product ID: 35086AG

    MV40(1.6GHz) Athlon, 1 GB of RAM, HD 160 GB at 5400 RPM LCD 11.6 in 1366 x 768 screen, ATI Radeon HD2200, 802.11bgn wireless, extensible WWAN, Bluetooth, 1 Gb Ethernet UltraNav, 3 c Li - ion, WinXP Home 32

    Here is the link to download driver for this netbook lenovo site:

    http://www-307.IBM.com/PC/support/site.WSS/quickPath.do?quickPathEntry=35086AG

    NetBook came with preinstalled Win. XP Home edition and I was going to install Win. XP Professional.

    So I created bootable USB stick Win. XP Pro. installation (cause this netbook is not the internal cd drive) and initialized at startup and begin the installation.

    Installation went smooth-> I chose C partition, formatted it and after the following formatting message appears:

    "The value of the following in the." SIF file used by Setup is
    damaged or missing:
    A value of 0 on the line in the [SourceDiskFiles] section
    with the key "SSA.exe."
    Setup cannot continue. To quit Setup, press F3. »

    So, as you can see, I can not continue with the installation, and the problem is the drive is already formatted and I have nothing on it, no BONES with nothing.

    Please help cause I need laptop soon.

    1. Use support XP vanilla as the source, copy the contents of the CD on a work PC
    2. Add to that the ATI/AMD AHCI drivers using nLite
    3. You can use usb multiboot for creating usb installation media

    And then manually install the driver strictly necessary to connect to the internet

    Finally, download, install and run the update of lenovo.

  • My seagate drive external drive keeps ejecting properly after installation of OS El Capitan

    My seagate external hard drive keeps ejecting properly after installation of OS El Capitan, it locks also towards the top and turns off, the ext drive when using, I have to restart my IMac 27 inches.  I have two ext hd who does very well for years before the installation of the operating system El Capitan

    If you have installed the Seagate Software, please delete and see if there is no change.

    Any third party software that is not installed on the App Store or by drag-and - drop in the Applications folder and uninstall by drag - move to the trash, is a modification of the system.

    Whenever you delete changes to the system, they must be eliminated completely, and the only way to do this is to use the uninstall tool, if any, provided by the developers, or follow their instructions. If the software has been removed incompletely, you may redownload or reinstall even to finish the job.

    I never install modifications of the system myself, and except as stated in this comment, I do not know how to uninstall them. You'll have to do your own research to find this information.

    Here are some general guidelines to help you get started. Suppose you want to remove the so-called "BrickMyMac" (a hypothetical example). First of all, menu using the product, check if there is one, for instructions. Not finding here, look at the Web site, let's say www.brickmymac.com. (Maybe it's not the name real site, if necessary, search the Web for the name of the product). If you don't find anything on the Web site or in your search, contact the developer. While you are waiting for a response, download BrickMyMac.dmg and open it. There may be a request here as "Uninstall BrickMyMac." If this is not the case, open "BrickMyMac.pkg" and look for an uninstall button. The uninstall program can also accessible by clicking on the button customize, when one exists.

    Back up all data before making any changes.

    Generally, you will need to restart the computer in order to perform an uninstall. Until you do this, there may be no effect, or the unpredictable effects.

    If you can't remove the software in any other way, you will have to erase and install OS X. Never install any third party software, unless you're sure you know how to uninstall in the contrary case, it can create problems which are very difficult to solve.

    Try to remove the complex system of changes by hunting for files by name, often will not work and can make the problem worse. The same goes for 'utilities' as the 'AppCleaner"designed to remove software.

  • Solution: The USB floppy drive is not recognized during installation of XP of RAID

    Hello

    This Solution is for notebooks Qosmio with RAID driver during (manual installation of windows)

    I found the Solution to this problem,

    [When you install Microsoft Windows XP by using a floppy drive USB on a player who]
    requires a driver during the installation, the USB floppy drive is not recognized in all
    installation. When Windows XP searches the driver of the second time, he will not be able to see
    the floppy USB drive drive and prompts the user for the driver (RAID) again.
    The installation will never reach this point. ]

    Solution:

    This is a limitation of Microsoft, the Floppy Drive are do not appear in the file Windows 'txtsetup.sif.

    Simply change the floppy drive in another brand and avoid Usb 2.0 external Usb floppy plus old 1 Try
    Also note the back of drive sometimes they write (no bootable) avoid this also

    I personally Test this and it does not work it is "IBM Portable floppy drive" drive silver
    P/N 27L 4226, FRU P/N 05K 9283 TEAC CORPORATION MODEL NO. FD-05PUB

    The following USB floppy drives are listed in the file "txtsetup.sif" and are supported:

    Device ID = VID: 057B and PID: 0000 for external floppy USB SONY drive, Sony 09K 9835 part number

    Device ID = VID: 0644 and PID: 0000 for floppy drive to the external USB, TEAC, IBM replacement part number (FRU) 13N6752

    USB\VID_03EE & PID_6901; Mitsumi USB floppy drive

    USB\VID_057B & PID_0000; Floppy drive USB YEData, Sony part number 09K 9835

    USB\VID_0644 & PID_0000; Floppy drive USB TEAC 27L 4226, FRU 05K 9283 IBM option part number

    The following USB floppy drives are not listed in the txtsetup.sif file and are not supported:

    USB\VID_03F0 & PID_2001; HP
    USB\VID_054C & PID_002C; Sony
    USB\VID_057B & PID_0001; YEData
    USB\VID_0409 & PID_0040; NEC
    USB\VID_0424 & PID_0FDC; SMSC

    If you want manual of Installation of Windows Xp Media Center Edition 2005
    then check out my discussion here

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16498

    Thank you for the very interesting topic.
    I think that it s an enemy of information all of you who have the same problem.

    Thanks ;)

  • came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional. I have no games. No solitaire, Minesweeper, no nothing.

    original title: lack of games
    I have an Acer Aspire PC. It came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional.

    I have no games. No solitaire, Minesweeper, no nothing.
    How can I, without seeking to erase and reinstall again?

    To activate the built-in Windows 7 games:

    1. click on Start (lower-left) and then on Control Panel.

    2. click on programs and features.

    3. on the left side of the screen, click on 'Windows turn features on or off".

    4. find the entry called games & check the box next to it.

    5. click on OK.

    6 reset.

    If the games box is already checked, uncheck the box , click OK, restart, then do steps 1-6 above.

  • Driver Ethernet controller and network installation

    I am a newbie, please help for the driver Ethernet controller and network installation

    product - portable r007tx

    OS - window7 64 bit

    -> error code realtech controller network not found... If hibernation is enabled, connect the cable

    unknown device device info Manager

    (1) ethernet controller

    PCI\VEN_10EC & DEV_8136 & SUBSYS_2212103C & REV_07

    PCI\VEN_10EC & DEV_8136 & SUBSYS_2212103C

    PCI\VEN_10EC & DEV_8136 & CC_020000

    PCI\VEN_10EC & DEV_8136 & CC_0200

    (2) network controller

    PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00

    PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C

    PCI\VEN_1814 & DEV_3290 & CC_028000

    PCI\VEN_1814 & DEV_3290 & CC_0280

    (3) pci device

    PCI\VEN_10EC & DEV_5229 & SUBSYS_2212103C & REV_01

    PCI\VEN_10EC & DEV_5229 & SUBSYS_2212103C

    PCI\VEN_10EC & DEV_5229 & CC_FF0000

    PCI\VEN_10EC & DEV_5229 & CC_FF00

    Hello:

    First install the Intel chipset driver and restart.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127793-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

    Ethernet controller:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127816-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

    network controller:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127448-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

    PCI device:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127815-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

  • Driver VGA Dual-Mode Camera installs but the device does not appear in the list of devices to Windows Photo Gallery

    Driver VGA Dual-Mode Camera installs but the device does not appear in the list of devices to Windows Photo Gallery

    Hello

    I will need to know the brand and model of the device in order to help you solve it.

    You see the device listed in the Control Panel, hardware and sound, scanners and cameras?
    Brent
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I have wireless devices outside of ALFA UBDO gt8 but does not support its driver on windows 8 for installation

    I have wireless devices outside of ALFA UBDO gt8 but does not support its driver on windows 8 for installation. She did not support on windows 7. isn't there a mechanism to make as the support of windows 8?

    Original title: not to support the pilot

    Hello

    Don't forget to check with the help of the manufacturer of the device as their may be a newer version, if necessary
    still in beta.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Microsoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
    This section-> update the NIC driver).
    http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

    Drivers and Microsoft - Windows 8 - Hardware
    http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

    Microsoft - Windows 8 - why Windows is not find my device?
    http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

    Microsoft - Windows 8 - what happens if a device is not installed correctly
    http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Satellite PSKDGE L850 - 1 5 - download driver Win 7

    I bought a 'refurbished' L850 1 5 for a CEX shop on the eve of the departure of the United Kingdom. Unfortunately it kept crashing and autoreinstalling Windows too often for me to start same loading user data saved from another pc and finally that HARD drive works most completely kaput. (not long after the purchase, I discovered the SDslot didn't work, and Windows reported that half the memory of 8 GB specified in the description of paper on the cover label and the specifications of the Toshiba) While that, I logged on the Toshiba Forums for information corresponding to the set of drivers for my SKU. Before you suggest that I throw more money after that bad by adds still more the cost of what has been a rotten, 2ndhand purchase buy a Toshiba Windows Media DVD, I lost already from £310 for a laptop unusable from the beginning and therefore need to minimize any additional spending bought Windows I already paid for.

    Fortunately I have taken note of the MS registration KEY shortly after purchase. If he had not been in the day before my flight, I obviously would have returned for refund. Unfortunately, all attempts from abroad using variousPC to download the drivers failed. It turns out that I guessed correctly, Toshiba downloads are region locked, now I'm briefly in the UK, downloads now seem to be possible. (only now realized default Forum I registered on US only) Like CEX was of no help, I need urgent advice on the following:

    (1) I have only a slow 3 G connection with a low datacap during my short stay, thus all downloads must be made at a public library. When I visited the library computer, I expected to find just 1 set of Toshiba Windows 7 Home 64 bit driver for the specific files for Réf. PSKDGE-02C00NMD, or L850 1 5 ether, but everything that I could find was a long list of drivers and it was not unclear to me which ones I should use. I had hoped the relevant drivers required for the PN # and Windows version should all reside in a single folder to prevent clients accidentally installing bad drivers. If not, is it possible to receive a list of the fileset names used for the PSKDGE-02C00NMD for 64-bit and 32-bit Windows 7? The library limits the time limit on their computers. If I can get a list of names of files to this version PN # and Win7, in absence of all files in a single folder, maybe I can use this list to copy/paste in the download area of Toshiba Driver to quickly download the required game?

    (2) the laptop had installed a "CEX" Windows 7 Home Premium 64 of brand. I kept a safe note of the OEM registration KEY. Someone thought to reinstall Windows simpler is to download an image of Windows 7 Home Premium 64 on MS website, burn it to DVD or USB, install and when you are prompted to enter the KEY, enter the KEY value, I noted. I did have to go through this procedure before. Anyone more familiar with it, I know if this method will work? Reason I ask also for a list of a 32-bit version is, somewhere, I had a 32-bit version of Windows 7. Obviously, I prefer to install a known good 64-bit version of Win7, but if above does not work, then 32 bit 2nd best.

    I didn't add "tags", as I didn't know where on the site to access list, and it doesn't allow me to type my own.

    Thanks in advance

    Hello

    I don't have your model, but I would like to give you some tips:
    1. when I installed win 7 on my own machine L850-1W9 most of the devices have been recognized and drivers work have been installed automatically.

    Those who were not was wireless adapter, 3 USB and card reader.

    First you should start with the wireless, if currently you have no way of finding, in Device Manager, what wireless adapter you have, you can find the model number on a black sticker under the battery (must remove the battery to see the sticker on my machine). Sticker of mine says ' contains radio device ar5b225 "which means Atheros AR5B22 for mine, I know that I need to download driver Atheros and yours should be similar.

    After it is best to download and install: the chip driver (it is one that I can see), then you must install the display Intel, Touchpad, Lan, USB driver and card reader.
    My card reader did not work in win7 until I installed the drivers for it. Surprisingly, after installing windows 10 no drivers were needed. You should try to see if it's the case with yours as well.
    2. you got the part right, but better to go for 64-bit, a

    BTW, you can check the RAM easily to these series, even without a screwdriver or having to turn on your computer.
    Just flip and look through the Center air holes, if there is that one module, then they were really out of the other.
    If you see two (one is on the top the other two held by the small metal arms on the sides) and then either windows, they have installed is a 32-bit or one of the modules is not sitting properly or is defective and must be removed as soon as possible.
    Good luck

  • HP 250 g4: driver Win 7 for: hp 250 g4

    Hello

    I'm trying to downgrade my notebook to win 10 to Win 7 64 bit.

    I was able to manage Wifi & Lan. But I have trouble with:

    -DPTF peripheral frame

    -PCI - Ver-/ Entschlusselungscontroler

    -Unknown device (unbekanntes Gerät)

    I downloaded the driver fom the HP taken website. Whitch driver should I install to fix it.

    Please let me know if you need further information.

    THX

    BR

    Tom

    PIC

    You are the very welcome.

    If you can not get the hotfix to work, I compressed upwards and tied the driver below.

    See if my TPM 2.0 driver works on your model.

    Install you it according to the same manual method, as you did for the dynamic thermal conductor.

    Download and uncompress the file that I attached to his record.  Don't do anything with the files in the folder.

    Click on the unknown device requiring the driver, click on the driver tab, click on put up-to-date driver, select her browse my computer for driver software option, navigate to the driver folder, that you have unzipped, make sure the include subfolders is selected and see if the driver will install.

Maybe you are looking for

  • Cannot find HP slimline s5134sc drivers for WLAN

    Cannot find HP slimline s5134sc drivers for WLAN I belive I have install the chipset for the s5134sc driver, but can't find the drivers, Please HELP ;-)

  • Satellite A100-153 battery charging

    Hello I bought my laptop about 2 weeks ago, he worked at the House perfect for me. A week ago, I travel to Thailand for a holiday and now the problem startet, the battery recharge at all, anyone have any idea why it doesn't work, they got the same fo

  • How to make the data previously generated reuse vi?

    Attached VI is just a simple example for my problem. I want to generate some data (or read it thanks to a shared variable, etc, etc) and create statistics on these data. In this example, a histogram and value medium. Now, if I stop the VI & restart a

  • Microsoft cares if I use my old OS OEM with the new motherboard?

    I am building a newish computer; Microsoft cares any longer, if I use my old OS OEM with the new motherboard? All of the previous answers to this question are all about 2011 are resolutely "affirmative", they care. I know that Microsoft has had a cha

  • BlackBerry Q10 Q 10 - question - internet is locked?

    I was updating my settings to control parental app World when suddenly flashed my phone, I lost my custom background, my browser, app world, and from what I can tell that I am locked out of the internet. I do not have access to any application that r