W540 Port Replicator

Similar Questions

• Portege A600-133 - Slim Port Replicator III does not entirely

  Hello...

  I just got a Slim Port Replicator III (model PA3681E-2PRP) and annexed a number of devices (a VGA monitor, a USB keyboard and a USB mouse), according to the user manual.

  The unit, however, does well with my laptop (a Portege A600-133). Specifically, the laptop battery does not, the devices are not recognized and docking led remains off. However, the laptop turns on and off of the port replicator power switch, and the ethernet port also works very well.

  Clues?

  Thank you!

  Dimitris

  Hello
  I also had problems with the Portege A600 and Slim Port Replikator, when I just connect, works all good! Maybe it's too you, when you try to connect to the port Slim R. you: with your hands the laptop with Slim Port R. extra press together in the Air about where the connector is, one when she makes "Clack" and then a right is connected!
  Sorry for my English

• Satellite Pro A60 and Port Replicator

  I JUST BOUGHT A SATELLITE PRO A60 AND USB2 PORT REPLICATOR. WHEN I ATTACH MY LASERJET 1100 AND PRINT A TEST PAGE IT PRINTS WELL BUT IF I PRINT A WORD DOCUMENT IT RELEASED FOR EXAMPLE GOGGLEDYGOOK. CAN YOU HELP ME?

  Hello

  I understand your problem in this way.

  You have connected the printer via Port Replicator ports for the A60 SatPro.

  Œuvres driver and so on correctly because the test page can be printed. But when you want to print from Word the printer isn't or what do you mean by "GOGGLEDYGOOK".

  Could you describe a little more detailly and give us some more information like Toshiba shipped OS or MS based installation, Service Pack installed, the name of the printer and so on...

  When you want to validate this information, it would be easier to help you!

  Bob

• HP 3005pr USB 3.0 Port replica: software for USB 3.0 Port Replicator

  Hello!

  CAN´t find the software for 3005pr 3.0 HP Port Replicator Port HP support.

  Hello

  If the device has win 10 OS:

  Please find the driver below:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5387722 & swItemId = ob_165439_1 & swEnvOid = 4192

  Check the drivers for the device that you are trying to connect:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5387722 & swLangOid = 8 & swEnvOid = 4192

  I hope it helps

  I am an employee of HP

  Please click on 'Accept as Solution' on the post that solves your problem to help others find a solution even.
  Click the 'Thumbs Up' to say 'Thank you' for helping!

• Portege R700: Speed Port Replicator HI + USB Vista questions

  Good afternoon

  I am having trouble with 4-5 new R500-1hd (311th short number), the number could be higher, but users could not have reported it.
  If the laptop is disconnected from the HI Speed Port Replicator 2, it off very well and the laptop can be used, but when the laptop is brought back it does not recognize the mouse or the keyboard. The device does not appear as an "unknown device" in Device Manager, but just does not at all appear.

  A new problem that has arisen is again when the machine is off station USB devices install\work not unless they are connected on port SATA\USB, once again the machine failed to detect at all. Even when devices are picked up, it may take in any case of 30-60 seconds before the work of the mouse and the keyboard.

  These are corporate images deployed through WDS and the problem is very intermittent.
  A reset is applied each time the device will be detected.

  I had a couple of flying machines and finished the stretch prior to the computer with Windows 7, computer image portable devices all work fine with or without the docking station and can be used instantly.

  Isn't anyone has an idea how I can fix this problem?

  Concerning

  Kris

  Hello

  As far as I know speed Port Replicator HI new supports the USB 3.0 standard.
  I found the USB driver on the European driver Toshiba for the USB 3.0 feature page.

  I recommend that you install this!

  Thanks for posting comments after trying that

• Tecra Z50-A-12 X is not properly connected to the Port Replicator III

  Hello

  I just bought a TECRA Z50-A-12 X with HI-speed III 120 replicator Port Replicator.

  It works but the computer is not stable and I fear that this will eventually damage the port see me problems when using.

  Indeed, the PC sits well in the Replicator.

  Is there a solution or did not have this app?

  Thank you for your response.

  Nice day

  Hello

  Please don't get me wrong, but you should clarify this with Toshiba directly. Here on this forum, you can hear some useful opinions and comments, but I think you should get info straight from Toshiba directly.

  You can also do is to contact the nearest Toshiba service provider and ask for help. You can visit ASP and demonstrate how it works and I hope that you will get a professional opinion on this problem.

  Long ago I had a Tecra laptop with port replicator, and he was well in place and really does so port replicator he not there no danger of damage to the small port located in the lower corner.

• Portege M750 on plu III Advanced Port Replicator

  The Portege M750 works on Advanced Port Replicator III more (PA3474E-1PRP)?

  Hello

  I discovered that the Express II port replicator is compatible with the Portege M750.

  I searched a bit on google and found this link to an Advanced Port Replicator III over the datasheet. But it s only in German.
  http://www2.inmac.de/inmac_assets/PDF/German/e569412_datasheet.PDF

  However, the M750 Poretge is not listed as a unit compatible and taken in charge.
  So I guess that more Advanced Port Replicator III cannot be used with protected M750 toghterer

  Welcome them

• Portege Z30-A-12N with Port Replicator Port Hi-Speed USB III problems

  Hi all

  I have a big problem with my new Portege Z30-A-12N and Hi-Speed Port Replicator III.

  I connected the power, DVI, LAN, mouse and keyboard to the Port Replicator.
  Power, DVI and LAN are okay, but none will be found if I connect something to the USB Ports 2.0 or 3.0.
  No mouse, no keyboard, and no USB key.

  When I start my Portege I must enter a password after you press the power button.
  These password, I could enter with the external keyboard, but in windows, no keyboard has been found.

  If I connect the keyboard and mouse to the USB Ports of the Portege instead of Port Replicator, the two has been found.

  I ran Windows 7 Enterprise on the Portege.
  BIOS version is 3.30

  Do you have a solution for me?

  Hello

  The HI-SPEED PORT REPLICATOR III PA5116E-1PRP supports 2 x USB 2.0 and 4 x USB 3.0 ports.
  You n t special need Win 7 drivers in order to be able to use the USB ports or other interfaces such as VGA, DVI, audio, etc.

  Sound problems, make sure that the audio device has been selected in the right panel-> sound-> playback tab

  By the way: Win 7 needs USB driver 3.0 which is preinstalled when the laptop was equipped with USB 3.0 ports. My knowledge if your mobile phone does not support USB 3.0, you will be able to use the port replicator USB 3.0 ports.

  Finally and above all devices must be connected before you start the computer. The decision supported and compatible specifications: Portégé R30 - A, Tecra Z40 - A, Tecra Z50 - A, Portégé Z30-A/Z30t-A, Tecra A50 - has

• Tecra A10 - BSOD with Port Replicator Port and external monitor

  Hello

  I have a Tecra A10 PTSB0A 05C023 with XP SP3 on an Express Port Replicator, running to an external monitor (1280 x 1024) on VGA. Works fine for a while then seems BSOD spontaneously when not in service - possibly when screensaver or powersaver comes into play.

  BSOD is a STOP 0x0000007E in igxpmp32.sys

  I downloaded and installed the latest video drivers intel from the Web from Toshiba - 6.14.10.4953 site

  Any help or advice by eliminating the BSOD would be greatly appreciated.

  Kind regards

  Rhys.

  Hi mate,

  I asked Google to igxpmp32.sys and this file belongs to the Intel display driver. In your case, I recommend the page Intel searching for the latest display drivers.
  [www.intel.com]

  Also have a look on the Toshiba site for a BIOS update, or you have already installed the latest version of the BIOS?

  In addition, it would be interesting to know what Port Replicator you use exactly. Can you post the model number?

• Advanced Port Replicator PA3474E-7-248 poor sound quality on Tecra A7-248

  Hello

  recently, I bought used Replicator Toshiba Advanced Port PA3474E-1PRP, working nice, but the only problem is audio - output when connecting the speakers to the port replicator - speakers of the laptop still works + there is a significant loss in sound quality.

  Everyone had the same problem, or maybe there's a sollution for this?
  THX in advance

  PS my laptop is Tecra A7-248

  Hello

  To me that sounds like this, out on the port replicator doesn t port works properly if connect you directly to the computer laptop, everything works correctly, or can you notice any problems?

  Have you tested other speakers?

  In this case I would recommend updating the sound card drivers and BIOS. The two you can download on the Toshiba site.
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Tecra M7 & express II PA3680E-1PRP port replicator do not work together

  Hello

  I ve a Toshiba tecra M7 in recent years and have just bought a brand new sealed express duplicator II model PA3680E (docking station) but unfortunately it does not work and a new replacement, sent by the provider does not work.

  What's happening:
  With docking station connected to the start; nothing happens, and the Green dock light stays off.

  Windows when I put the tecra m7 on the dock it connects and disconnects immediately then will not reconnect. The power of power port, the lan port and the power switch work on the dock, but I understand that these are just happening through connections. The Green led power lights up also for less than a second.

  For example, when I do a connection hot, windows is connection chime followed immediately by a chime of disconnection and restores, also all USB connected devices flick-on and immediately off the coast.

  I ve tried under the original Toshiba windows XP install (with the latest Toshiba) and a fresh install of windows 7 (fully updated with all the update from Toshiba). BIOS is the latest available 3.50 (also tried 1.70 & 3.20 bios). tried bios USB legacy on and outside.

  Can someone please help

  Hello

  > With docking station, connected to the start; nothing happens, and the Green dock light stays off.

  The green light that is placed near the eject button it lights up green during normal operation and must be extinguished if the phone has been disconnected.

  If the led does not light green, so I guess that the laptop is not connected correctly.

  If you connect the laptop for the first time to the port replicator, a message should appear stating the device connected to the port replicator are ready to use.

  In my opinion, there could be a problem with the pins or connectors, but the question is what may be touched connector: on the side of Tecra or port replicator

  However, I think that go you to your dealer and need to test another.

• No sound on the Port Replicator port II (Tecra S11 - 12M)

  Hello! Because today, I have no sound on my sound from the Port Replicator II (PA3680E-1PRP) plug to run my external speakers. Instead, the internal speakers are running. On the laptop itself, making works well, only the port replicator appears to be dead.

  It has worked well over 10 months now without any complaint. I've seen a few similar cases in forums but no answer that could help me. I didn't lie all the drivers again.

  I work with WIN7/64-bit Service Pack 1.

  Anyone know how to fix?

  Thank you, christophe

  Hello

  Recommend to check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=56460

  * Milo_Tweenie wrote: *.

  + Did not know that the audio 3.5 mm output jack is actually run by a USB hub in the duplicator. +
  + Concluded that the multimedia USB Audio Device was not installed driver for the audio port. Click the button to update the driver, it has found the driver automatically and now I have sound. +

• Two screens DVI on Port Replicator II with Tecra S10-160

  Hello to all 2!

  Right now I'm working with two external 19 "TFT screens connected to the Port Replicator II (Tecra S10-160 inside with closed screen). A display is connected to the DVI port available, the other is connected on the available on the Port Replicator II VGA port.
  A single display (DVI) is used as the main office, the other (VGA) is used as office improved (both show different content).

  My problem is the poor quality of the VGA signal and the problem, my two new screens are only supported DVI.

  Is it possible to connect two DVI displays to the DVI - D Port Replicator II? I already checked several DVI-Y-cables, but I'm still looking for a solution connect two displays via DVI with the function to get two split screens and not the same content on both screens.

  Hope you got my point and have information or ideas for products for me.
  Thanks in advance.

  Hello

  Have you already tested a VGA to DVI? So, you can use the VGA connector on the port replicator and your monitor's DVI port.

  I mean such a cable like this

  Such an adapter you can always use the function to get two split screens and not the same content on both screens. :)

• Toshiba high speed Port Replicator III - use of 2 x 4 k monitors on 60 Hz

  Dear Toshiba support.

  Is it possible to run 2 x 4 monitors k on 60 Hz on the Port Replicator Port Hi-speed Toshiba III (dockingsation)?
  He says he has Display port 1.3 (supports 4 k monitor the 60 Hz.) and a 2.0 HDMI (which also supports monitor k 4 on 60 Hz.).

  With sincere friendships.
  Augurkie

  PauPau wrote in this thread on the high speed Port Replicator III
  https://Forum.Toshiba.EU/showthread.php?83052

  DisplayPort supports the following resolutions:

  Resolution - Refresh Rate (HZ)
  640 x 480 - 60,72,75,85
  720 x 480-85
  800 x 600 - 56,60,72,75,85
  848 x 480-60
  1024 x 768 - 60,70,75,85
  1152 x 864-75
  1280 x 720 - 50,60
  1280 x 768 - 60,75,85
  1280 x 800-60
  1280 x 960 - 60,85
  1280 x 1024 - 60,75,85
  1360 x 768-60
  1366 x 768-60
  1400 x 1050 - 60,75
  1440 x 900 - 60,75,85
  1600 x 1200-60
  1680 x 1050-60
  1920 x 1080 - 24,25,30,50,60
  1920 x 1200-60
  2560 x 1600-60
  3200 x 2000-60

  But it seems the resolution also depends on the GPU built in the notebook

• Driver Toshiba Hi speed Port Replicator III

  Hello.

  I can't find a driver for Toshiba Hi speed Port Replicator III driver on your driver page.

  These need drivers or they are plug-and-play? The port replicator USB ports do not work.

  Thank you.

  I'm not 100% sure but I think you should be able to use all phones compatible with this port replicator.
  What model of laptop do you have?
  Do you use it with the original OS that you got with it?