WAAS for RADIUS and Windows Server 2012 NPS server configuration
I have trouble getting our WAAS to authenticate devices and connection via RADIUS. Running NPS on Windows Server 2012. Confirmed that my device WAAS can ping the IP address of the RADIUS server. Using the attribute Type of administrative service under network policies. Look in the event viewer, I get an error with event ID 15, "a malformed RADIUS message has been received of the xxxx-WAAS-01 customer. The data is the RADIUS message. »
Right now, I can connect with only the local default user and password name. Here are a few config for WAAS, running version 6.2.1:
RADIUS server key *.
Server RADIUS auth-host 10.194.10.13 port 1645
!
connection of local authentication enable secondary
enable login authentication RADIUS primary
local authentication configuration enable secondary
Service radius Authentication configuration Select primary
failover of authentication server unavailable
I confirmed that my shared key is entered correctly on the WAAS and the NPS. I have the switches/routers Cisco works well on the same RADIUS server.
Someone had a bit of luck plug their WAAS to RADIUS devices using Windows Server 2012 and NPS? If so, please share additional measures you have taken to get things to work.
Hi Paul,.
Based on the RADIUS error you probably experience failure CSCva14731. This was discovered with Cisco ACS, but can affect other RADIUS servers.
To confirm, you can check the corresponding error in syslog WAAS:
authenticate: % WAAS-UNKNOWN-3-899999: pam_radius_auth: talk_radius:
Also, this defect would not affect peripheral on software 5.x WAAS. The problem will be solved in 6.2.3 to come free.
Tags: Cisco DataCenter
Similar Questions
-
The installer has announced will work for CF 9 as well, so that CF9 runs on Windows Server 2012?
New supported platform for ColdFusion 10
Adobe Announces Microsoft Windows 8 and Microsoft Windows Server 2012 platform support for ColdFusion 10. 10 ColdFusion windows installers have been updated to support new platforms. Installers can be downloaded from the ColdFusion 10 product downloads page.
Last 10 ColdFusion Windows installers,
- Support of Windows 8 and Windows Server 2012.
- Support 8 Internet Services (IIS8).
- Include the JRE 1.7 update 15.
- Include ColdFusion 10 mandatory update.
Important note: ColdFusion 8 of 10 update must be applied with the latest windows installer 10 ColdFusion. For more details refer to this article.
CF9 not supported Windows 2012.
Odd Windows 2008 r2 is not on the list of support CF9 yet many people use this platform.
HTH, Carl.
-
I am running HP pavillion A1130n desktop computer > problem > I can not IN stall Microsoft Update > update security for windows media 9 for windows xp and windows server 2003 kb2447961 of coding... .e send me a response message. > * E-mail address is removed from the privacy *.
Hello
1. don't you encounter any error message during the installation of this update?
2 is this problem limited to this particular update?I ask to download the update manually and then install it.Here is the download link:
A security update for Windows Media Encoder 9 Series for Windows XP and Windows Server 2003 (KB2447961)
http://www.microsoft.com/downloads/en/details.aspx?familyid=EF0ADA2C-965F-438F-A1D3-BD45DB8460C1&displaylang=en.I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
"Time modified" attribute of a file file the registry hive is updated when you load and then unload the registry hive files without making any changes to the files on a computer that is running Windows Server 2008 or Windows Vista, or Windows 7
I see a hotfix is provided for Windows Server 2008 or Windows Vista: http://support.microsoft.com/kb/973148/ and for Windows Server 2008 R2 or Windows 7: http://support.microsoft.com/kb/983544
Question: I want to know if this problem is also present in Windows XP and Windows Server 2003, and if so, we have a solution already for XP and Windows 2003?
Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link: http://social.technet.microsoft.com/Forums/en/category/windowsserver/
-
Original title: Details of the cipher suites?
Can someone please guide me what combinations encryption algorithm is compatible for MS SQL Windows Server 2012 2012. ??
Thank you
Hello
Your question is beyond the scope of this community.
Please repost your question in the SQL Server TechNet Forums.
https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer
TechNet Server forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
AX4 and Windows server 2008 for 3 TB only one Partition
We need two partitions of 3TO. AX4 and Windows Server 2008 allow that?
This driver GPT runs stable with partition of size more than 2 TB?
Virtual disk AX4 may be greater than 2 TB?
Thank you
-
Mysterious FF 5.0.1 for Linux and Windows
Hello.
Mozilla has released, on 11 July, FF 5.0.1 to bring increased compatibility with Mac OS X Lion. You said:
Please note: users on Windows and Linux do not need and will not see the updated offer.
Yesterday, I noticed that FF 5.0.1 for Linux and Windows are available.
However, I can't find any credible information on the Internet which is all about. "Notice of security for Firefox", "The Mozilla Foundation security advisories" and 'US-CERT current activity' pages did not mention of FF 5.0.1 for Linux and Windows at all.
Could you please shed some light on this particular and still mysterious version?
Thanks in advance.
So that all OSs have the same version number of Firefox. Something on the update server, I think. You seem to have already Firefox installed 5.0.1. See find your version of Firefox
-
Separated from this thread.
Joachim
When first pose the problem? Was it before or after the December updates?
KB3004394 and KB3024777 appear in view update history? Or do they appear in installed updates?
Gerry, thanks for your post. I have the same problem as Joachim started this thread. I am running Windows 7 sp1. I have a Dell computer and it's certainly a legitimate copy of Windows (confirmed computer 'properties' and it is enabled).
By your post, I saw just to update and the KB3004394 (installed on 12/10/2014) and KB3024777 (installed on 12/12/2014) show as comfortable. I usually leave the Windows download updates automatically and I install them to stop. I watched the second update and according to Microsoft.com:
Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2
The KB 3004394 update which was dated December 10, 2014 can cause additional problems on computers that run Windows 7 Service Pack 1 (SP1) and Windows Server 2008 R2 SP1. This includes the inability to install future updates. This new update is available to remove KB 3004394 from your computer.
My problem is, as of today 14/12/2014, I still get the pop up "this computer is running not windows genuine', even with KB3024777 installed.
Any thoughts?
Thank you
Bob C
Right-click on CMD
Click on run as administrator
At the command prompt, type the following commands:
slmgr.vbs - ipk xxxx-xxxx-xxxx-xxxx (to replace the specified in the current product key)
xxxx-xxxx-xxxx-xxxx - represents your product key
Press enter on your keyboard
Then type: slmgr.vbs - ato (this will force the activation)
Leave the command prompt
Restart your computer
-
PowerEdge 2600 and Windows Server 2008 R2 installation problem
Hello.
I have a Dell PowerEdge 2600 server. Here is the configuration:
BIOS version: A14
2 x Intel Xeon 2800 MHz 533 MHz, 512 k (SL6VN)
4 x 1 GB of RAM
2 x 146 GB (IBM-IC35L146UCDY10-0) in RAID1
6 x 147 Gb (Fujitsu MAP3147NC) in a RAID5 configuration
Firmware for the PERC 4/Di 2.52D
It has worked well during the installation of Windows Server 2000. But now I need to install Windows Server 2008 R2.
Here's the problem: when I boot server to Windows Server 2008 R2 installation DVD, it starts to load the files and after a few minutes shows an error (I copy the exact error number) who said he's trying to run the 64-bit application, but unfortunately, this processor does not support 64-bit applications.
I was able to find a download for Windows 2008 x 64 on the page Support of Dell PowerEdge 2600. This means that you can install an operating system 64-bit on this PE 2600, is it not?
I know that Windows Server 2008 x 64 and Windows Server 2008 R2 are different operating systems, but 64-bit is always 64 - bit.
Also, I know that Intel Xeon 2800 MHz 533 MHz 512 kb (SL6VN) is a 32-bit processor, but if it was delivered with these processors, and there are downloads for 64-bit operating systems exist, it should be able to install these operating systems.
Please tell us how can I install Windows Server 2008 R2 on the PowerEdge 2600.
Thanks in advance.
The list 2008 x 64 in the list of OS for the 2600 is clearly a typographical error / support/web content team:
- The 2600's chipset does not support ALL 64-bit processors
http://Ark.Intel.com/products/27741/Intel-E7501-memory-controller - No. 6 systems are supported on 64-bit OS - not all listed here, but the 6600 lists NO 64-bit OS (8 G was the first):
http://advisors.Dell.com/AgileWeb/iDrivematrixView.aspx - 2003 x 64 is not no more, which would be if 64 bits have been supported all the
You pay for 2008 x 86 as the latest OS on 2600... or get a newer server (starting with the 8th generation of servers as the PE 2800) to operate 2008R2.
"2008R2 is a 64-bit operating system that is not as forgiving as 2008 x 64 on the execution of threads of 16 bits."
16-bit applications are not supported in 64-bit operating systems:
http://blogs.technet.com/b/chitpro-en/archive/2009/04/14/Windows-and-16-bit-applications.aspx - The 2600's chipset does not support ALL 64-bit processors
-
PeopleTools 8.55 DPKs for Linux and Windows first
The new PeopleSoft cloud Architecture comes with 8.55 PeopleTools.
The first Oracle as delivered DPKs (deployment Packages) for Linux and Windows platforms of Oracle database.
It will be delivered later for other platforms:
- DB2 for z/OS and Linux
- UNIX
- Windows and SQL Server
If you want to learn more about DPK there is a FAQ on the PCA (PeopleSoft cloud Architecture) and DPK (Deployment Package):
-
People,
Hello. I need to install the Windows 7 host virtualization software, and then install Windows Server 2003 as a guest operating system.
VMware Workstation supports Windows 7 as operating system host and Windows Server 2003 as a guest operating system, but it's not free download.
People know that supports virtualization software free Windows 7 as operating system host and Windows Server 2003 as the operating system invited?
Thanks in advance.
As I said in your previous post, VMWare Player is a free download and does not support Win7 as host and Win2k3 as a guest. VMWare Player is also included with VMWare Workstation, you can imply that most of the time something that supports VMWare Workstation as a guest operating system is also a guests supported for the reader.
And unlike previous versions, player 3 includes the ability to create virtual machines base. For many people, especially those who are starting just in virtualization, player is sufficient.
VMWare Workstation, although not free, can be installed as a 30 day trial. After the trial, you can not start your virtual machines in my computer, but because the player is included in the installation, you can still run your virtual machines in the drive without having to uninstall anything. So just install Workstation. After the trial expires, if you wish that the advanced features of the workstation, then buy it. If not, just continue to use the drive.
-
People,
Hello.
Because my laptop is preinstalled Windows 7 and cannot dual boot multiple operating systems. I need to install VMware in Windows 7 host and then install Windows Server 2003 as a guest operating system.
I installed VMware Server 2.0.2 in Windows 7 and Windows Server 2003 operating system as a guest host. Everything works fine for a while. But VMware Server Home Page https://mylaptop:8333 / IU cannot display more.
I found that Windows 7 is not a host for VMware Server 2 and strange operating system might happen at any time. I found that 'VMware Player 3' is fully supported in Windows 7 as host operating system but is not taken in charge of Windows Server 2003 as a guest operating system.
People knows what product VMware Windows 7 support as host operating system and Windows Server 2003 as the operating system prompted?
Thanks in advance
Hello
IMHO, I think that Workstation is the vmware product just for you, the requirements
It supports Windows 7 as a facilitator and Windows 2003 as a host with no problems. You can be confident about it at 100%.
Best wishes / Saludos.
Pablo
Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. MUCHAS gracias!
-
Need for installations of FireFox since version 3 for MAC and Windows so far
Nice day!
I work for a software testing company, and I need FireFox since Version 3 of present facilities. for Mac and Windows. Is there any way I can get these facilities, Cant seem to find them on the Web site.
It will be much appreciated if you can help.
Thank you
Reinhart Buit
BUIT. [email protected] -
Satellite L500-1 - where to find the drivers for XP and Windows 7?
For me, are necessary for the driver to L500-1. On a site not found. If it is a good idea to use the driver other model of what to write.
To me, the driver under Windows XP, Windows 7.
Hello
I searched a bit on the Toshiba site and it seems that your model is part of the PSLJTE series and as a result, you can download all the drivers for XP and Windows 7 here:
http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
Laptop > Satellite > Satellite L Series > Satellite L500 > PSLJTECheck this box!
-
How to reset the password for administrator on windows server 2008 datacenter eddition before the login in vmware
Post in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/
Maybe you are looking for
-
Please tell me why this script does not work with Firefox. It works with Safari. Here is the page that includes the script: www.lionsgatehoa.org/newslettertest.html. Thank you. Tom Engleman Here's the script in my html document: < embed src = "News20
-
Lenovo T530 "Fan Error".
2 days ago I started getting the error message "Fan Error" after starting my computer (T530). Before it gives me the message there is a beeping noise hard. I'm going back to school soon and I hope that there is a way to fix it myself without having t
-
output no express, no cursor under the subject line
When you try to compose an e-mail with outlook express you can fill to: to: cc: bcc: when you move to the body of your message, the dose of slider will not work to start your message
-
WUSB600N v2 drivers for Windows 7 64 bit?
Hello My mother has recently bought a desktop Dell Inspiron 546 new with Windows 7 64 bit computer. I can't the computer to install the drivers on the cd or the ones I downloaded and installed. Is available here one that works? Thank you.
-
Retrieve items from the Recycle Bin?
OK, so I'm a newbie in this thing whole smartphone? Just got my Droid X last Friday and always try to understand everything - it's a bit overwhelming! I tried to drag something from one home to another screen (easier said than done) and I accidental