WAG120N, firmware problem!

Similar Questions

• Tecra M4 - dead battery - is this a BIOS or firmware problem?

  Hi all

  I'm on a Toshiba * Tecra M4 * model * PTM40E-01L01RGR * Bios version * 3.5. *
  From one day to the other, the battery is completely dead - this means time battery falls about 2 hours to zero in one day.
  Now, the battery may not be chanrged no more - it's as if there is none installed.
  So no start no power no power cord and if you unplug the phone cord is switched off immediately.

  From my experience if availability of battery becomes slowly shorter and shorter the battery is old or fails. But if she doesn't have a function from one day to the other, I'd say it's a typical problem of firmware or bios.

  Is there an update of the firmware or bios Tecra M4 (support page SAIS not - last date is 3.5 installed) or is it a software patch or solution that I can use to recover the battery live?

  Thanks for the help!

  Michael

  Hello

  All new BIOS updates are published on the European driver Toshiba page.
  If you use the latest version of the BIOS (compared to the version on the page), then other BIOS is not available.

  Of course, it of really strange that your battery doesn't work more than one day to the next, but I would still recommend a new battery to check because it s really sound like a battery problem.

  Cheers mate

• Satellite L850: Drive HARD Firmware problem prevent data recovery

  Am a little confused and need a simple explanation
  My HDD L850 died under warranty and was sent to the people of data recovery to recover the data before entering new drive under warranty.

  I am told that my hard drive has a fairly unique combination of firmware and the drive that prevents the recovery until they get this firmware. Now 6 weeks after it happened I stll wait.

  Someone in support could explain to me in simple terms, why this firmware is the problem cause and so far can only be obtained by your partner data recovery company?

  Hello

  I think that you will here get a correct answer, why the people of data recovery needs of these packages since it is a user forum.

  But to my knowledge all the 2.5 hard drives and SSD drive supports various firmware.
  These firmware tells the hardware how to interact with the operating system.

  It seems that people in data recovery needs these packages in order to get access to the HARD drive, and I presume, without the compatible firmware, it is not possible to recover the data.

• Firmware problem + storage unrecognized device

  Feature: Nighthawk x 6 R8000

  Firmware: V1.0.2.46_1.0.97

  Platforms: Dell Inspiron (win 7), Acer Aspire(win 7), Custom PC (Win 10), Wii U, Kyocera Mobile, etc.

  1 firmware issue regarding 1.0.3.4 version

  -J' got 1.0.3.4 firmware installed for more than a month and constantly I have to hard reset the router because it would pass all (eventually) wireless internet cable to each unit at least once a week. I tested to see if it was the cable modem in the modem and instant internet. Internet connection would remain outside until I have pedaled power the router. I started V1.0.2.46_1.0.97 firmware and it was for 2 weeks with no problems. The modem is a motorola surfboard SB6141, internet provider is TWC.

  2. the router does not recognize my SanDisk Extreme 240 500 GB USB 3.0 Portable Solid State Drive for some reason any. I have a Maxtor Onetouch 4 much longer 160 GB mini it recognizes no problem that I use my file server, I wanted to update my SanDisk, but nothing I tried works. I tried port USB3.0 both the 2.0 no anvil.

  Any ideas on the problem of storage? The problem of Firmware is to support netgrear people so that they know that there is a problem with the firmware.

  Hi Redpaw,

  Make sure that both disks have the same format. If the SanDisk Extreme differs the Maxtor, you can try reformatting it even with the Maxtor.

• Firmware problem

  Hello

  the nxt brick is connected and recognized by the lab view (2012 version), when you try to download the Firmware "LEGO MINDSTORMS NXT Firmware V.1.31"

  When you try to download the firmware the progress begins charges and brick (... for the ICT ICT ICT ICT) check the box forever, until I have stop the ticking with the nxt program.

  Thank you

  Hello

  The firmeware is v1.31 Yes and I got the problem solved!

  the problem was that Arduino has been run on the computer where the ticking. uninstallation of arduino solved the problem

  Thanks anyway

• 6 d flash sync problem. Flash not pertaining to the body? Firmware problem? User error?

  I was shooting my 6 d today in the Aviary. I think I was in TV mode. My Canon speedlite 320EX. I had been shooting with the flash but turned on. The shutter was set at 1/400th. ISO has been, I know, yet the value of the last room, I was, which was dark, also is at 3200 ISO.

  All the birds represented were whole animals actually; no half-birds were nowhere to be seen.

  In any case, the camera could not reduce the shutter on the camera's maximum sync speed (1/180) as you expect it to do. As a result, the flash was clearly out of sync with the shutter.

  In addition, the metadata says "flash not fire not'.»» But obviously he did fire.

  This could be a firmware issue? Bad camera? I forget some obvious user error?

  

  

  Assuming that flash & camera is 100% compatible (new models of organs aren't always happy with older strobes) AND based on the few problems that I had with my 1Ds2 & 580 EX maybe it's that the flash is not as far forward in the hot shoe as possible, or even if it is it does not connections PERFECT on all 5 terminals. I had this problem a few times & are looking for now it. If I do not get the result that I'm waiting on my test shots (to check exposure), I move & re adjust until I get the right result.

• Management remote WAG120N + DDNS problem

  Hello

  WAG120N has a problem with the connection of remote administration when DDNS is set up.

  Steps to reproduce:

  ===============

  1. enable remote management

  2 Configure DDNS (fe. DynDNS.org)

  3. try to connect to the router using the DDNS name, not IP

  -Online web browser will go to an infinite loop of disconecting/connection to the router

  4 detect the IP address of the router assigned the DDNS name (using the command nslookup fe.)

  5. try to connect to the router using detected IP address, DDNS name no

  -online connection successfully established

  I use 3 different linksys to cisco routers, but only with WAS120N, I have such a problem. Is there any bugtrack system where I can log a bug on this issue?

  Yes, I tried. I see that there is a new version that was released after my message from the forum. I can see that this one has been fixed in the release notes (* happy *). Going to try it...

• Satellite R20-DVD recorder (necessary firmware) problem

  Hello
  in my Toshiba Satellite R20 (Tablet) recorder DVD (Pioneer) was accidentally flashed with the incorrect firmware by the previous user (I work in the company and this tablet came to me already used one).
  Now when power on/off, ERROR of CD-ROM appears for a while, then window starts normally on HARD drive. In Windows, I do not see the optical drive - first I have to suspend the system, and then, after waking up, the DVD drive is recognized and installed but only works in PIO mode. I have seen that the displayed model number is incorrect (DVR - K16 and should be DVR-K16TBR because it is desrcibed the disk).
  Is it possible to get the firmware original and reflash the drive by myself?

  Kind regards

  T. Trojan

  Hello

  Drive, you can reflash t by yourself, this can only an ASP (authorized service provider), but I don't know, if this possible of m.

  The best way is to contact an ASP and ask them. Here you can find one:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

  In the worst cases, the disc must be replaced.

  Tell me what happened, I interested in m.

  Good bye

• 32RL938 TV does not power up - firmware problem

  Hello

  My 32RL938 TV does power no more. He asked me to do an update and I pressed ok. When he reached 5%, he stopped for 2 hours. I unplugged him and then when I plugged back it it starts but shows nothing. The remote control does not work. I can't do anything. Can someone help me please?

  Maybe you can try to update the firmware once more?
  Give it a try.

  Here you can find and download the firmware and update of all instructions step by step.
  http://www.DL.Toshiba.com/

• Deleting song with 01.01.32 Firmware problem

  My 2 GB Clip shows strange behavior since I put on the 01.01.32 Firmware. When you remove the currenty played piece, an invalid combination of the artist/title is displayed after the removal process. When you press the button read the clip lights up with the song 1 and the previous selection is lost. Environment: I don't have mp3 files on my clip, each of them containing the tag tags v2. My international settings are: English/Europe.

  Bye and thank you very much

  HP

  Sandisk support helped: make a backup and format the clip. This helped. Now works correctly.

  HP

• New Firmware problem

  After updating the latest firmware, Windows Media Player tells me that my camera will not play music of the subscription. Anyone has any advice?

  If the device is in MSC mode, subscription or transfer DRM will not work, because the MTP mode is required for the WMDRM 10 / Janus DRM system.

  You can appear a window of Windows Explorer by pressing [Windows key] + E or workstation, with the Sansa in to see which mode is active.

  If the device indicates with the assigned drive letter, under devices with removable media, the Sansa is in MSC mode.

  If the device indicates under the other, like a media player, the Sansa is in MTP mode.

  In the Rhapsody 4 client, the Sansa lists in the left pane of sources .  Note that if she appears in CAPITAL letters, the device is in MSC mode.  Indeed, transfers are possible, but not Rhapsody To Go (subscription) titles.  You can buy titles and transfer them in the Rhapsody MP3 and pretend you're on iTunes, then in MSC mode.

  I like the service To Go, despite the goofy name.  If you pass your Sansa PSG, content to go and 'allow', function reappears.

  Bob

• Store TV + firmware and Samba

  Since there doesn't seem to be much interest at Toshiba to straighten their firmware that I looked for other options. In another post, I found that the Stor.e TV + and Noontec V8S are basically the same. I've studied this and this seemed to be the case.

  OK, so I took the risk and updated the firmware of my Stor.e TV + Noontec V8S latest firmware website noontec V3.0816.13_V8S.

  The update went well without a hitch (took about 2 minutes of an old drive flash 256 MB connected to the back of the USB port on the unit, because I formatted before using it) and some of the irritating downsides of the Toshiba firmware has been resolved. Samba has worked in some way, but I was still not able to download songs directly on the Stor.e more wireless, which is the only other feature I need currently. The irritating remote control buttons were replaced by how any sane person could use them (I had changed my universal remote control to correct this, will have to change the settings if I kept the updated firmware) the new firmware seems solid, but I do not USE THE CAPABLITIES VIDEO, so I can't comment on that.

  A major drawback of this update for me, it's the small screen of the device to become much less readable. Looks like there is a problem with the police on the new firmware. I use my Stor.e only as a music player flac, and since I don't have it connected to a TV the small screen is essential for me to select tracks or discs. I have 300 + discs, the Stor.e is an excellent cheap media player, which connect me to my STEREO through a DAC system.

  I therefore had to change to the firmware of Toshiba to correct this display problem and stopped trying to get sorted Samba. Looks like I'd still use USB to download music to the Stor.e when I buy the new CD. What a pity.

  Either by the way, the new firmware of Toshiba is very similar to the old firmware, in what is lacking the possibility to start the Samba. In the readme file, Toshiba says that the new firmware corrects a problem with the network, but I think it's probably the smallest issue that most users have with the firmware of Toshiba.

  UPDATE:
  After some research, I learned that the MVix Ultio is just like the Noontec player, and some users flashed their Noontecs for the MVix firmware successfully. It was much less obvious if the Mvix and Toshiba are the same, the MVix photos different from the Stor.e, but I decided to give it a try anyway.

  So I have the TV Stor.e + updated the latest MVix Ultio (downloaded from the site Web Mvix) 3.12 firmware. Note that it is the standard Ultio, NOT the pro. Also note that with this version you don't have to (and in fact will not be able to) install the drivers of Samba and separate bitTorrent, as stated in the manual. These seem to be only for the Ultio pro and are already included in the standard firmware Ultio.

  This solved all my problems with Samba, and the display with the Noontec firmware problem does not exist with the Mvix firmware. A whim, I noticed with this version of firmware is when I try to open the visit from the Samba browser neighbor he sees not all hard disks. Seems to be a disk formatting question (I formatted the disc via the menu Store) I can see readers on my other Stor.e TV +. I know that Samba still works however, as I can access my Stor.E in exploring through a wireless router (it appears as Venus under Network on Windows 8).

  As I said previously, I use my Stor.e to play .flac files only, so cannot comment if the Mvix firmware has problems with playing other files or formats. I do not think that there will be major problems, even if, as it seems Mvix regularly update their firmware to fix any problems (NOT like Toshiba!)

  If my suggestion to those who want to get the firmware updated for their Toshiba Store TV + is to go for the MVix 3.12 firmware. He can still back up the firmware update from Toshiba (downloadable from their site) if there are problems.

  You do this at your own risk, however, if brick you your unit don't blame me...

• T410 + battery Slice - sleep problem

  Dear community,

  I have a Thinkpad T410 with the following specifications:

  Intel Core i7 620 m

  4 GB of RAM

  NVIDIA nv3100m

  Windows 7 Professional x 64

  I have problems if I go to fashion 'sleep'. If I press mode 'sleep', the t410 go to sleep less than 1 second pulse led on the power button, and the sign of the moon on the back of the LCD turns off. Next time if I turn on the T410, Windows asks me if I will start normally or in safe mode. So this means that the battery or the T410 certainly interrupts the current, and they seem to have no power. But it doesn't happen every time. For example, I give the following:

  Main battery: battery 100%: 100%: "sleep" mode works perfectly

  Main battery: battery 100%: 50%: "sleep" mode works perfectly

  Main battery: battery 100%: 0%: "sleep" mode works perfectly

  Main battery: battery Slice 75%: 0%: "sleep" mode works perfectly

  Main battery: between 60 downto 0% battery range: 100%: standby mode does not work.

  I did this for the moment a long time. I can't give a percentage by exactly, when the sleep mode does not work, but if the slice to 0% and the main battery approximately between 60% downto > 0%.

  I updated my BIOS and also the energy Manager. But there is the problem more far.

  Anyone have the same problem and have a solution for this? I think that behave in the system/T410 isn't normal right?

  Thanks in advance for your help. I look forward to your answers...

  Best regards

  Dear community,

  I know that the subject is almost a year, but I have a solution for the problem mentioned above.

  If you install the "Intel AMT 6.2 management engine Firmware" problem is gone.

  I am very pleased to find this solution. Now I can to each battery charge percentage goes into sleep, even with the battery installed slice mode.

  Best regards

• LaserJet p1102w: firmware

  My printers firmware datecode is 20091104.

  I need to update, but I can't find firmware for printer thei.

  When I search I always end up here:

  http://support.HP.com/us-en/product/HP-LaserJet-P1100-Printer-series/4110394/model/4110306/drivers

  It comes from the pilots, but no mention of the Firmware. Please direct me to the right URL

  I got around the problem by using a win7 PC. On this system the utility worked and I could update the printers firmware.

  Firmware problem now solved!

• Problems with the world of warcraft: lk! Computer freezes is.

  Okay, since I instaled vista/win7, I have the same problem: so I open my wow, my pc just freeze and I need to restart it with the button restart. I almost tried everything: compatibility mode / updated/updated directx drivers / moved my wow folder in the other place.
  I have two ways: to install win xp as second victory, or try the virtual Xp mode (but it seems that this does not work on my pc).
  What are your suggestions, because I'm not the only one who have this kind of problem.

  Hi Klounas8,

  Looks to the event log that you have published, your firmware needs to be updated.

  "Level: error".
  Description:
  Management features power performance CPU 0 in group 0 are disabled due to a firmware problem. Check with the manufacturer of the computer for firmware updated. »

  You will need to go to your computer manufacturer's website to get the latest updates of firmware for your machine.

  I hope this helps! Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think