WAG120N wireless bridge with E1500

Similar Questions

• EA6300 with a XAC1900 wireless bridge

  Is it possible for a bridge with a XAC1900 wireless EA6300.

  It must be wired, You. For instructions, see this link.

• Having trouble getting a Dlink DWL-G820 wireless bridge to work with wrt610n

  I'm trying to get a few dlink wireless bridges to work with wrt610n, but not having a chance.  I left Wrt610n router with the IP default '192.168.1.1' and configured accordingly bridges with addresses "192.168.1.xxx".

  Wireless bridges is not happy.  Any ideas?  Bridges have been working well when I was with the IPS "192.168.0.xxx" with wrt610n

  Sorry guys, the problem was the security setting wireless that I used on the WRT610N, not the addressing system.

  Sorry for the inconvenience.

• Unable to join a homegroup Windows 7 with a network that spans a wireless bridge

  I have two Windows 7 machines that are at the ends of the face of a wired LAN network which connects via a wireless bridge and I am unable to get Windows 7 machines on each side of the brdige to connect to a homegroup created across the bridge.  Perhaps to better illustrate what I mean, here's my network configuration:

  Wireless router:
  Machine from Windows 7 1 (LAN wired to the router)
  Windows XP machine (for LAN cable to the router)

  Wireless Bridge (connect wirelessly to the wireless router):
  Computer Windows 7 2 (LAN wired to the bridge)
  PS3 (wired LAN to the bridge)
  TV (cable LAN to the bridge)

  I use the bridge wireless set up so that I can connect LAN devices wired to the wireless bridge so that they appear to be on the same local network as all other devices on the wireless router (stops to have at home and the bridge wire wireless allows me to expand the scope of all wireless devices I might have).  While all the machines can meet without a problem and I can't even set Windows Media Player to stream video to the PS3 and the TV through its capabilities of DLNA, Windows 7 network mapping server shows not the systems connected to the other end of the gateway wireless as being on the same network (although it shows them); so Windows 7 Homegroup does not see other machines as being on the same network.

  The only thing I can think to do with limitations in TCP/IP regarding a wireless bridge, from the perspective of wireless router all connected to the wireless gateway devices appear to be a device (they all appear under the same physical MAC address as the device only "wireless" that connects to the network is the wireless bridge - who just happens to have three other devices connected to it) even if they are assigned to different (numbers) IP that are in the same subnet, etc.).  So I guess what I'm wondering Windows 7 has a limiation to recognise the devices connected via a wireless bridge?  Has anyone else encountered this problem and found a work around?

  Thank you.

  I had this same problem (unable to connect to a Windows 7 homegroup) on Windows 7 (64-bit) PC behind a wireless bridge using a D-Link DAP-1522 to a D - Link DIR-655 residing on the main network.

  The solution that worked for me was to allow for the "'wireless MAC CLONING ' with 'Source MAC = Auto" on the DAP-1522. "  It also had the beneficial effect of the side to fix a problem on PC behind the bridge where control Panel\All Control Panel Items\Network card cannot display all the network devices.

• With two routers wrt320n wireless bridge

  Dear reader,

  I want to bridge two routers too extend my network onbuildings on my compound. I I drew of how it should be. 'Bedrade' means 'wired', "Brug" means "bridge" and "draadloos" means "wireless" its all Dutch.

  Thankgs in advance

  

  Regarding accurate features 3rd party firmware that we need to ask in the forums of 3rd party firmware. I think that dd - wrt and tomato two add configuration options to configure a WRT as wireless bridge. You would operate a WRT in the normal way (i.e. you don't need 3rd party firmware on that one) and the other as the bridge that connects to the first.

• Wireless Bridge, TV are not not in the sharing of multimedia files

  Hi all - any help appreciated. I have just set up my Sony Bravia TV to the internet through a Linksys Wireless Bridge. Had a little trouble but with resets I connected to my network and internet.

  My Pc Vista show two up as servers but when I click on them, only some of the movies that I have on them appears and plays. Number of files is empty, even if there are the mpgs in them. Those who show your work. When I tried to add the tv media sharing in Windows media player 11 or the bridge or the TV show. The settings are ok, the DHCP is activated and the subnet mask is correct. What I am doing wrong?

  Also the Twonky server help? Can I use twonky server to connect to my hard drive NAS, also unrecognized by TV and has most of my saved movies stored on it.
  Thanks for any help you can give.
  Sue

  I decided to use Directv and attached my wireless bridge. It connected and I was able to play videos but again once my network drive was not appear. I probed more deep - went to administrative privileges and found an article on multimedia. Unfortunately the box shares on the network multimedia player has not verified! Control which allowed me to be able to stream all my video to the TV through directv set-top box. the network drive appeared as a server and all is well.

  I use the wireless bridge to connect directly to the TV when I want to access account netflix to my husband or other internet offerings of SONY, but as a coil of general for my stored photos and video I'll stay connected to the directv because it works very well.
  Sue

• The way of writing to a wireless bridge between two different routers.1:broadband and dir 2:dlink 605 l

  I want to bridge.and wireless I can't do that... Please send me how to write to a wireless bridge between two different routers.

  1:broadband
  and
  2:Dlink dir 605 l,

  Hi Mohammed Ehsan Jourah,.

  Thanks for posting the request in the Microsoft community forums.
  I understand that you need to know how to make a wireless bridge between two different routers

  What version of the operating system is installed on the computer?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  You can try the steps at the bridge between two different routers wireless.
  a. determine the coverage area. When using two or more routers, the coverage area should be divided, and each router should be placed in a central location in each subdivision. If you add a wireless router to an existing network, this may mean moving the first router.
  b. decide which router is the main router. The main router is connected to the Internet, a LAN cable or other networks. It should be as close to the wired network connections or who has the best line of sight to another wireless network. In addition, the main router should be a high range router, allowing large tables of State and more users.
  c. buy a spare antenna, as the antennas that come with most routers do not have very good range. Quality omnidirectional antennas can push the range and signal strength of each of the routers, which, in turn, will reduce the cost by allowing routers less cover more space overall.
  d. deploy the primary router carefully. This router is the most important and requires most of the time of installation and options. Set the WEP (Protocol) encryption Service Set Identifier (SSID) and wireless, set up the Internet connection and test the router with some clients (computers). Once you get the main router deployed, deploy other routers should be easy.
  e. deploy the secondary routers, which must be configured to operate in "mode of transition." Secondary routers should be deployed around the perimeter of a large area or 'hot spots' where users placed - for example, will convene a bench Park or the table.

  Links:
  Create a network bridge:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-network-bridge

  Add a connection to a network bridge:
  http://Windows.Microsoft.com/en-us/Windows7/add-a-connection-to-a-network-bridge

  Hope this information helps you. If you need to get help or information with decision-making wireless bridge between two different routers, I'll be happy to help you.

• LJ 1536 and Wireless Bridge: prints and scans but lost connection Toobox ePrint

  I connected my 1536dnf LaserJet recently purchased by the Ethernet cable to a bridge wireless to allow printing and scanning from my wireless laptop. It works very well. However, for some reason any communication is no longer with the printer through box HP tools or ePrint, who both worked very well to install. My router main displays the address IP of the LJ 1536 as a connected device. Somehow, the bridge becomes a way? There not at the beginning. Is there anything else that could prevent these kinds of communication but not printing/scanning? Is there a setting to resolve that I've not found? I tried to put the default gateway of the LaserJet printer for the IP address of the gateway instead of the router, but that did not help. Thanks in advance for any advice.

  Hey dako,.

  I would bypass the wireless bridge to see if it is causing the problem. Let me know what you find?

• WRT1900ac - has no Config - error unexpected 2117 wireless bridge

  I'm having a problem connecting 2 routers together in Wireless Bridge mode WRT1900AC.  I followed the instructions here to step 7 (Clicked "Yes" to the "Warning" screen), and then I get this error:

  Unexpected Error
  
  2117
  
  We've encountered an unexpected error. If the issue continues, please visit our Technical Support site.
  
  Details
  
  /jnap/router/InitiateWirelessConnection -- Status: 200 OK Date: Sat, 18 Apr 2015 05:22:03 GMT Server: lighttpd/1.4.34 Connection: close Content-Length: 87 Content-Type: application/json; charset=utf-8
  

  

  This router is brand new.  The only things I've done are:

  1. Perform a router unboxing conversion
  2. Ignored configuration wizard
  3. Try to configure wireless bridge mode
  4. Received the error saying I need to reset the router to the factory settings
  5. Reset the router to the factory with the red button settings
  6. Router connected directly to the link upstream (cable Modem)
  7. Through the Installation Wizard
  8. Update the Firmware to the official version: 1.1.8.164461
  9. Has crossed the Bridge wireless installation Instructions here
  10. Got to step 7
  11. EU 'unexpected error 2117.

  I retried again and got a different error:

  

  I thought I would add another update here, given that the issue has been isolated and fixed:

  It turns out that plugging in the Comcast cable on the floor was very old, had a longer cable length, and was also on a split bar.  Called Comcast to help solve our problem, and they were able to test the intensity of the signal on the line.  Signal was not reliable on the cable on the floor, so we moved the modem more near the source of moving the cable (don't run, no separator, the best signal of shorter cable).  Upstream of the modem connection was immediately more reliable, moving router downstairs gives the best WiFi coverage for the rest of the House.  I have decided at this time that the extra router was not necessary and referred.  So, Detective Conan... problem was double: bad signal on the incoming line from Comcast and bad location for WiFi router upstairs.

• E900 as wireless bridge

  The E900 has the ability to act as a wireless bridge?  If so, how I would establish that.

  You can configure to be an access point but not a bridge wireless with Linksys firmware.

  If you have version 1 of material then DD - WRT is supported and very probably can turn it into a wireless bridge.

• Wireless Bridge outside of Cisco 1530

  Hello

  Since the end of the sale of Cisco-1300/1400 wireless bridges, I searched for a replacement product.

  I noticed Cisco released the 1530 Outdoor Wireless Access Point.  Has anyone used it successfully as a bridge wireless, and nobody knows if theres a utility for calculating range to work remotely approximate the 1530 cover with integrated or external antenna?

  See you soon,.

  The replacement for the bridges were the exalt r5005 which Cisco sold. This is the real external point bridges up to 160mbps half duplex. You can probably use the old calc or mesh range calc for you give a good estimate.

  Sent by Cisco Support technique iPhone App

• Autonymous 1300 AP wireless bridge - BVI1 and bridge group Question

  Hi all

  I am setting up two 1300's as a bridge wireless, but I' am not going to use in the network, vlan 2 vlan 1 is my managent.  Does this mean that I won't be able to manage the wireless bridges because only the Group 1 bridge can route ip?

  I configured bridges wireless with the network infrastructure such as vlan vlan 2 on the SSID and I created a control2 on both AP quit my BVI1 on both sides.  AP associate between them, but I could not telnet or ping the bridge on the vlan 2.  I went then to the vlan 1 as the infrastructure vlan and I turned to BVI1 upward.  Then I could ping and telnet to the bridge wireless between the bridges.

  So with the installer, I want bridges will be managed locally via the console?

  The other issue I have is that I have a vlan 900 for the voice across the bridge but bridge-group # s only go up to 255, will my traffic vlan 900 still cross the bridge without the configuration of the bridge Group on the dot11 and fa0 subinterfaces?  Thank you

  Thank you

  Jason

  No need to create control2... BVI 1 is sufficient and map the SSID of the Valn 2... This will be enough to get the operational wireless network. the switch port configuration must be a trunk allowing all the VLANS.

  in what concerns the vlan voice... Simply create the interafce sub on the bridge. That's the problem.

  Concerning

  Surendra

• Wifi bridge with customer

  Hi all

  The wireless client works with wireless bridge, said AP1400?

  Thank you

  MAK

  Hi Mak,

  Currently the only bridge that does not accept client connections / association is the bridge of BR1310.

  The BR1410 will not accept any client association on this subject, it can be associated with only other bridges BR1410.

  The BR1310 has a "RootAP" mode, which allows to associate not only bridges not root which are also BR1310s, but association of customers such as wireless laptops and other models of APs as 1200s.

  I hope this helps.

  URL for more information BR1310:

  http://www.Cisco.com/en/us/products/ps5861/index.html

  Kind regards

  Aaron

• Wireless Bridge-Link a Wifi router to another router Wifi - network expansion

  Hello

  A question many people ask themselves, to ask the wifi community.

  On site-a computer on site b.

  |                                                                                                                                     |

  -----Wired-----                                                                                                 ------Wired------

  |                                                                                               |

  |                                                                                               |

  |                                                                                               |

  Router Cisco wireless))) (((routeur sans fil (lien-sys) - INTERNET))

  Site-A                                                                             Site-B

  Site B have a Wireless Linksys router WRT a regular (not DDwrt software), site b have internet.

  Site want to use is to talk to the Site-B to offer wireless Internet to East computer cable

  First of all, I wondered how it's called. There is wireless connection?

  Second, we succeed with cisco router, how can we?

  With what kind of model, we can do that?

  Thanks guys,.

  Or you can use the real wireless bridge as WET200 (inferior part) or Aironet 1400, 1300 series.

• No bridge with wifi

  Workstation 7.0.1

  Windows XP SP3 host

  Comments Windows 7

  With the wifi on the host computer, bridged network allows only network connections, but not internet access.

  NAT network allows at the same time, however, but I prefer bridged. What can we do?

  > What can we do?

  You should be able to use bridged with wireless.

  Run the virtual network editor and make sure the bridged (VMNet0) adapter is automatic and has your wireless and wireline, audited adapters in the automatic settings.

  If so, uncheck one apply and check and apply the settings again for "GOOSE". It works for me the rare opportunity that the automatic configuration fails to pull an IP address from my router (WiFi and cable). I turn off Bluetooth and VirtualBox adapters in the automatic settings.

  I run both wireless and cable into a laptop with XP and Server invited.

  Lou