WAG310G drops wireless

Similar Questions

• Lenovo 3000 v100 xp sp3 drops wireless connection

  I have a 300 Lenovo v100 running XP 32-bit with Service Pack 3.  He continues to drop the wireless connection.  I read that it can be a conflict with SP3.  Can I go back to sp2 without problem or should I buy a new network card.  Other solutions?    Thank you

  Hello

  I suggest you perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• Windows 8 drops wireless connection on laptop

  After having upgraded my Alienware m9700 to Windows 8 (starting from Windows 7), I now have questions where the wireless stops simply work. I have to refresh the scan wireless and reconnect to the router to connect. I can assign it directly to Windows 8 as I have other computers-by-side that are not running Windows 8 and do not drop the connection. Also, I changed the network cards to see if mine was a problem. Two adapters abandon the connection. I ran the laptop at the time allowed and they fall at the same time. I ran each separately and they fall. Yet once, it never happened with Windows 7.

  Any thoughts?

  A short version of my answer, it's what you think.  Windows 8 has a bug wireless where he will fall from the wireless network connections.  I saw where Windows 8 shows you're connected to a wireless network and the system is not actually connected.  Basically, wireless in Windows 8 connections are not strong and unpredictable.

  There are a lot of these type of discussions found here and elsewhere (in other forums) about Windows 8 wireless network connection problems.  Windows 8 tablets are also facing this problem.

• MacBook Pro drops wireless connection...

  Hello!

  My MacBook Pro is down constant wifi connection, sometimes hourly, sometimes every few seconds. It's very annoying and I have no idea what could be the problem... All I see is my MacBook has no assigned IP or auto-assignée IP. It is the only device in my house that has this problem, the rest works fine (several iOS and Android, Acer laptop, smart devices, storage attached to the network and so on...) I tried to use DHCP with a manual address static address as well (I put the Mac static IP in the routers settings using that). It helped for a few weeks, but it seems that the problem comes back. I tried to delete the wifi settings and restart the MacBook and the router... Reinstalling OS X also has not solved the problem. If you know or have any ideas what could help me I would really appreciate it.

  My equipment is:

  MacBook Pro 15 "retina (mid-2012),

  BTHub 4 (Type A).

  Software:

  V10.11.3 OS X El Capitan

  If you need information about hardware or software just ask. Thank you all in advance

  Wi - Fi connection problems can be a bit difficult to diagnose because there are many things that can affect performance, but there are some tools available:

  System Preferences > network > Wi - Fi > (help me) > (Diagnostics)

  This will check once for gross problems. But it tends to find any when your Wi - Fi connection works and does not at all when you connect Wi - Fi has abandoned.

  --------

  Hold down the Option key while you click on the wireless icon in the menu bar. This will display a number of important parameters on the performance of a Wi - Fi connection. a little, it will look like this:

  

  What values show you for Mode PHY and channel?

  What CISOS or the signal strength?

  What emission rates?

  very important and how many other networks do you see listed?

  --------

  Also note that there is an entry for the diagnosis wireless at the end of this menu. This isn't the same simple diagnosis of mind as in system preferences > network Panel. It can be called from this menu for a more complete look at your Wi - Fi configuration. Will be to report obvious problems, but once completed, you can also choose to leave the window open to control your connection.

  If you do this and go about your business, any unusual event will cause a warning to appear.

  

  .

• en drops wireless connection reconnects very frequently

  My system

  System model HP Pavilion dv7 Notebook PC

  Intel Centrino Wireless-N 1030

  Name of the operating system Microsoft Windows 7 Home Premium

  Driver c:\windows\system32\drivers\vwifimp.sys (6.1.7600.16385, 17.50 KB (17,920 bytes), 14/07/2009 02:07)

  It worked fine until 3 weeks ago an i can not find a related event or change.

  It happens on any wireless network where I've tried.

  When I run a 'router' ping / t and netsurveyor.exe to this pc at the same time I see a dip to 0 dB at a disconnection/reconnection, the Canal of wireles routers, but see no effect in the output of the ping at all

  I can't untherstand how wireless can be 0dB and stil an ip ping retiurn of the order of 4 to 15 ms

  All the material in my house

  ASUS with windows vista

  ASUS with windows 7

  HP wireless printer

  works very well.

  Hello:

  You can try to install the latest Intel driver for your card to see if that helps.

  The driver that you have installed is almost 3 years late.

  First download is the W7 32-bit driver you need.

  http://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21244&lang=eng&OSVersion=Windows%207%20(32-bit) * & DownloadType = software % 20Applications % 20

  Paul

• WRT610N frequently drops wireless connections

  Hello

  I have a WRT610N V1, which seems to have problems with wireless. He often falls all the wireless connection - not leases for IP addresses. One then we can not reconnect for a period of time, even after the reboot of the router and the modem. I just updated the firmware and do a full reset, but that no longer works. Any ideas?

  Hello. Thanks for writing. I had not tried to change the channel until yesterday. I took a live chat with Linksys tech support people. Here's what they said to do:

  For the 5 GHz band, set the width of the channel at 20 MHz only. Set the Standard channel to 36 - 5.180 GHz.
  For the 2.4 GHz band, set the width of the channel at 20 MHz only. Set the Standard 11 - 2, 462 GHz string.

  A. tab Configuration, basic settings, lower the MTU tab:
  1. set the MTU on "manual".
  2 entry 1400 as MTU size.
  3. save the settings.

  B. after that, power cycle (follow the steps below) all of your devices so that the new setting will take effect and the wireless signal are synchronized.
  1 turn off your PC/Laptop, the router and the modem (just unplug the power cord to the back of the router and the modem) for a minute.
  2. after one minute, turn on the modem first, then the router and then your portable PC.
  Note: Make sure that the lights on the modem are stable before you turn on the router.

  This seems to have worked for me.

• Satellite C660 - 1 d 7 - Wireless disconnects when not plugged in

  I had problems with the wireless on my C660 - 1 d 7 croissants. Every time I take it off the sector, drops wireless and I have to connect to Ethernet, which kind of takes the whole point far from mobile.

  I've updated the drivers on the system to the most recent (from the toshiba Web site) and yet he falls again. That it becomes embarrassing that I work from home, so VPN loaded, so whenever I lose the net, I have to keep logging into that, that takes away the time. I also use a VOIP phone that will again cut.

  Wireless LAN is Realtek RTL8118CE

  Can anyone help as its driving me potty.

  Hello

  This has been discussed many times here.
  Visit the Wirelles forum.
  The solution;
  -updated the BIOS to the latest state
  -update the WLan driver
  -Disable WLAN energy saving in Win 7 power management.

  Welcome them

• New computer down wireless

  Hi, just bought an acer computer after that I killed my laptop sitting on it.  He keeps visitor drop wireless.  We're back to zero, but happened every 2-5 minutes, making it unusable.  is not as check broadband I bought my neighbouring suburb to see if it is still connected... its really annoying me and it is impossible for me to work from home!

  He told me to check ssl and t something, which I did and which were connected...

  Help please!

  Hi Dellajohnson,

  -What operating system is installed on the computer?

  If you have installed Windows 7, you can read this article and check if that helps.

  This tutorial is designed to help you identify and solve problems with a wired (Ethernet) and wireless (Wi - Fi) network connections in Windows.

  Wireless and wired network problems: http://windows.microsoft.com/en-in/windows/network-connection-problem-help#network-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Response with the State of the question and we will be happy to offer you our help.

• WRT 1900ACS removes wireless LAN file transfers and internet connection

  I have WRT1900ACS which is declining by almost every file transfer wireless LAN I get out of a wireless laptop to a PC connected by cable; So far, I'm using the latest firmware version: 1.0.1.174588 and both are version of Windows 10 PC 1607.

  When I transfer a lot of small files, the transfer stops after about 2-4%, drops wireless connection and the adapter will not reconnect. I have to restart the wireless computer to get the wireless adapter to connect again.

  This would seem to indicate a problem with wireless network card driver. The same id of the event was logged in the forum thread below:

  http://www.techsupportforum.com/forums/f338/Windows-10-wireless-drop-out-1057898.html

• PC cannot connect to the wireless network

  Windows Vista and office computer HP.  The use of the Airport Extreme.

  All other computers in the House can connect to the wireless network.

  The Vista machine declined the connection Wireless intermittently for the past two weeks.  Tonight, he lost it completely.  When I click on "connect to network" in the network control panel - I see the wireless network.  But when I click on connect, I get a message that Windows cannot connect to this network.

  I changed the password on the Airport Extreme and rebooted, it.  Wireless usb on Windows machine the device works correctly, by checking through the properties box.

  For example, Vista machine is recognizing the wireless network, but does not connect. Why not?

  I'm ready to throw the computer out the window!

  Hello

  Check the PoodlesAway solution to the same issue here:

  http://social.answers.Microsoft.com/forums/fi-fi/vistanetworking/thread/d4fa044e-8C41-4D8D-a4b1-82ee9ff556ac

  ======================================

  Apple Airport may be your main problem - did you check its firmware?

  Read these
  http://osxdaily.com/2009/09/01/how-i-fixed-my-dropping-wireless-airport-connection-problem-in-Snow-Leopard/

  http://reviews.CNET.com/8301-13727_7-10331876-263.html

  ======================================

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Wireless disconnects the transfer of large files

  Hello

  When large amounts of data transfer (in one or several files - no difference) of my D520 wireless on my desktop via a belkin F5D7632v1000 drops wireless connection and the transfer stops. Happens usually somewhere between 30 and 100 MB. When falls and displays cannot restore, connect by clicking on OK re - find the network again. I had this problem once on an old HP laptop and it was something to do with needing old drivers for the wireless card. The map in this particular laptop is a Dell 1390. Driver 4.100.15.5.

  Now, I had this before, when I had a laptop to work the same and had diversity of main antennas set in advanced settings for the card and I disabled the IBSS 54 g protection mode. However, this doesn't do the trick. Unfortunately, I don't have access to check the other settings in the advanced wireless adapter properties. Does anyone have a failsafe of the advanced settings of the adapter set? See you soon.

  
  

• WLan disconnects when Satellite T110-107 of router

  I ve a Satellite T110-107 * with windows 7/64-bit

  Linking the T110 in my home network wireless works perfectly near the router.
  When I move away from it drops wireless.

  Previously, he worked far away from the router.
  I tested with other machines and the wireless still works well on them... I've already updated the driver, but the problem persists.

  What can I do more?

  Thank you

  > Before, it worked far away from the router.

  What have you changed in the past?
  Maybe something in the settings of the WLan router?

  What about the Wan channel option (1-12) that can be set in the settings of the Wlan router?
  I recommend you to check different channels.

  In addition you should go to power options Windows and need to disable for the WLan in advanced energy saving power settings

• MACBOOK PRO 2015 WIFI UNPLUG SLEEP YOSEMITE EL CAPITAN HELP :/

  Hello, I recently bought a new macbook pro 2015 13.3 inch edition last month and when I close the lid of the screen or put my laptop to sleep and wake up the display of my network settings says that my wifi is connected but webpages in safari and other features of the internet do not work and I need to activate the wifi and turn it back on and it works again. I tried absolutely everything already to try to solve the problem as reseting; Landau, MSC, deleting of plist files, remove and reset pefferred adding new location and reset service order, pure networks install of El Capitan 10.11 and upgrade 10.11.2 and even get my card replaced airport and macbook pro replaced shorty after. Until I replaced it, it ran from El Capitan. And now the replaced macbook pro is running Yosemite 10.10.5 and the problem is still there.

  I found has temporarily solution which was to download nosleep Yosemite version extension program that disables the function sleep at all times, but eventually it will damage my screen. I would like to know if anyone finds a solution for this problem? My wifi works fine on all my other devices such as my: 2 pc, chrome book, iPad and iPhone. It gives just problems on my macbook pro only. Everyone knows about this problem? And did you find a good solution that I have not mentioned? also I have Time Warner Cable and I have a 2 in 1 router modem by model Arris DG1670A which has 2.4 and 5 G-banding and the problem occurs on both frequencies. I have also the 300/20 DL / plan UL which allows to connect more devices to the internet if that helps. I tried my macbook pro on a neighbors WiFi and on connecting wifi apple store it does not disconnect and worked correctly, but I did not try it long determine if it worked well.

  IM thinking of buying an other internet router modem but I don't want to spend the money if its will not solve the problem and that this problem cannot be resolved it would be wise to return my macbook pro?

  Hello NYFAME,

  Thank you for using communities Support from Apple!

  I understand that you have unexpected drops wireless connection when your Mac wakes up from sleep. It seems that you are connected, but you cannot connect to the internet.

  To begin troubleshooting of this situation, I suggest to use Wireless Diagnostics to help you identify and resolve any potential problems.

  Use Wireless Diagnostics helps you troubleshoot Wi - Fi on your Mac - Apple Support

  See you soon!

• HP envy 15 m6 connectivity problem

  I've had this laptop for 1 year and a half. I had good results until recently, the Internet has been uncertain, it disconnects or has limited internet. I tried many solutions to reset winsock, to reinstall the driver. I tried to update the driver, disableing and help and many other things. However, none of them have worked. I have tried almost everything on the Microsoft Web site and the HP Web site. I have also contacted the Intel site, to no prevail. Is there anything else I can try, or maybe I have the wrong driver. I have an Intel (R) Dual-Band Wireless AC 3160. One of the mistakes that I get whenever I try recurring troubleshooting is missing protocols, but I also frequently get the problem with wireless network card error. I would really appreciate any kind of feedback.

  Hello @eagarcia00,

  I'm glad that the WiFi connect now! I could not find any documents specifically solve the loss of packets of data over a wireless network. I found an article from a different website with measures to reduce packet loss.

  http://www.TomsHardware.com/Forum/39115-43-packet-drops-wireless-network

  If this information helped you, click on the thumbs up!

• Material

  1. name of product HP Pavilion DV7 #XW899AV

  2. Windows 7 64 bit

  The problem I'm having is this, whenever I move the computer:

  oWireless light switch electrician orange

  o the best ie volume key functions up/down brightness, stop working

  o Windows 7 cannot recognize the plug as being plugged or unplugged.

  o drops wireless connection

  This only happens if I move the laptop fast or if I pick up or set down. The only way to solve the problem of Wi - Fi is to disable and re-enable the wireless connection, but even in this case seeing fixed network connection stays orange. The only way to get at the top function keys to work is the function key or reset the computer. Any suggestions?

  * Update *.

  I can not also run the HP battery Tester, it crashes whenever I try to run it. I tried compatibility mode settings and functioning as an administrator.

  It looks like I can set myself... It seems that the issue was created by HP coolsense... The program must be installed by corruption and whenever my computer would transition from fixed to mobile turns off things... Reinstalled the HP support assistant and the fouls went