WAG54G2 and BT Broadband

Similar Questions

• Windows Vista does not recognize the graphics card and the broadband

  Original title: recognize the graphics card and the broadband connection

  Windows vista can't recognize the graphics card and the broadband connection in the Dell laptop

  Hi mfadhelmu,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. you receive messages or error codes?

  4. have you updated all device drivers?

  You can try to launch the Fixit and see if it helps:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have a 6930p elitebook lack of base system driver and module broadband un2400 mobile

  Hi I recently bought an elitebook 6930p with windows xp installed on it.  After clean installation windows 8, I discovered that my base system driver and hp un2400 mobile broadband module is missing, any ideas? I know that there are several discussions resolved about windows 7 but nothing about windows 8, thanks

  Hello:

  You need this driver for the 0004.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&prodNameId=3688870&swEnvOID=4059&swLang=13&taskId=135&swItem=ob-109933-1&mode=3

  The adapter to wide band may not be supported for W8.

  If the driver is not installed automatically, my only recommendation would be to try to install manually by using the following method.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-83605-1&prodNameId=3688870&swEnvOID=4059&swLang=13&taskId=135&mode=5

  Download and run the W7 driver.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-83605-1&prodNameId=3688870&swEnvOID=4059&swLang=13&taskId=135&mode=5

  Conclusion of any windows error you get.

  Go to Device Manager and click the map broadband which need pilots. Click on the driver tab, click on set to update driver.

  Select travel it my computer for the software method and locate the installation folder that was created when you ran the file.

  Who will be in C:\SWSetup\sp48568.

  Make sure that the include subfolders is selected, and I hope that the driver will be installed.

  If this isn't the case, then it probably won't all what you can do to get the card to operate in W8.

• Apple TV, itunes movies and no broadband internet

  Hello everyone - I am building a new home.  We are talking about in the country.  I don't have high speed internet to others.  That said, I've been living with Apple TV only, for a few years and have a ton of movies. I wish I could continue to watch these movies.

  Since my hard drive on my mac do a not enough space for all the 100 + movies I own, I have no option?

  I've sifted through messages previous mobile iTunes on an external hard drive, in what concerns but they are 5 years old and more.  Maybe I'm not looking the correct keywords.

  We need more help, you can provide.

  You must move the iTunes library in full to a large external drive. This will not affect its functionality, and you will always be able to home sharing iTunes.

  To move your iTunes library, the simplest method is to move the entire iTunes folder to the new drive. Then hold down the Option key when you start iTunes and iTunes directly to the library in the new location.

• VPN (PPTP) and mobile broadband - help me!

  Hello

  I got an SL500 and I use a card SIM of Fullrate, that works well (although when you press 'activate' in the wwan he said my access provider is not supported? but I can't log in, no problem).

  But then I have to connect to a VPN to my University to be able to use certain software licenses, it works well... for 10 minutes, then the wwan connection is lost and I can't reconnect. Vista repair functions, ipconfig/release/renew nothing works except a restart used.

  Help me! I am really frustrated...

  I've updated yesterday - there was an update of hdspa and I changed the global settings for the without thread is not allowed to turn, when idle, and it seems that helped. have used the high-speed and vpn all day and not a single interruption.

  Nice!

• Five PC and my broadband connection are 100% wireless.

  I live in the country, no cable and no DSL and forget satellite.  $100.00 per 10 GB of data, I can't afford to download 5 times.  I need to download it and install it on my 5 systems, who already have the upgrade of Windows reserved 10.  How can I do this?

  I multiple computers, do I need to download 10 Windows on each computer?

  You can download a. ISO file and update each computer offline. The ISO should be available at the time where Windows 10 launches.

  How to: upgrade previous versions of Windows using the file ISO for Windows 10

  Please note that you may need to download the right edition of Windows 10 for the version/edition of Windows that you are upgrading. If you upgrade to the wrong edition, IE. Windows 7 Edition Home Premium Windows 10 Pro, you will need to purchase a license to go back to Windows 7 Home Premium or Windows 10 Pro and upgrade to Windows 10 Home.

  What are the editions of Windows 10 available?

• Hub BT 1800 HG wireless and card PC Laptop/1060

  Hello

  I have a portable S2410-304 Toshiba without a Wireless LAN mini. I connected the laptop to the BT Wireless Hub via the Ethernet connection without no problems whatsover, and the broadband connection is great. However, I tried to get the BT Voyager 1060 portable Wireless PC Card to work with no joy either.

  The laptop has Windows XP SP2 and wireless broadband is via the supplied software, rather than through Windows XP. The laptop recognizes the card in the PCI slot, but for some reason any does not have a signal coming through the router.

  I have another laptop and I have the Ethernet connection and wireless LAN works without any problem. I've uninstalled and reinstalled the software, swapped the PCI slots and (as I have two cards) even tried the other card (and they both work in my notebook to another). I contacted BT and they told me to try uninstalling Norton and make sure that the Windows Firewall has been turned off and re - install. Still no joy.

  Does anyone have any ideas as to why the router and the map don't communicate wireless, and yet they're fine an Ethernet cable?

  Thank you

  Steve

  [Edited by: admin]

  Hi Lim

  If the card is recognized and installed properly there must be a problem with BT card settings and configuration of the card. The only thing I can recommend is to check all the settings, especially in the Center BT wireless.

  Good bye

• slow computer, soundtracks playing in the background, force quit to restart... Finally I found it... in the top toolbar by clicking window, there were a hundred sites or windows had never seen before... I forced in front and deleted in

  Slow computer, Rainbow spinning, several sound tracks in the background, repeated force constant close.  I found the problem

  in the toolbar top inside windows... he had a hundred sites and windows listed, I brought all forward and deleted the individually, all the

  the problems have disappeared and my broadband is zipping the long... no balls spinning now.  Was this something that came with the recent update,

  they are deleted is no longer at the stop down?  I am 80 years Thos downloaded El captain and responsible for all the updates and never had a problem with it.  Just if I let you know

  they are called 'Pop-UNDER' windows... usually called by clicking anywhere on a Web page (javascript 'giant' invisible button on the entire page)

  These can be put in check by:

  • do not visit unscrupulous Web sites (However, some OK sites may have been pirated unbeknownst to the owner)
  • browser add-on that "kills" the windows
    • P.U.K a rough Killer(prev: killjasmin) killjasmin: Modules for Firefox
    • Apple Safari - ScamZapper - Club

  A faster way for all persistent windows your way to "kill".

  • Exit the browser
  • Launch of the browser with the SHIFT key held - behaviors vary a little, but it is intended for these sorts of things

• my computer laptop presario won't start, the screen is black and a shrill alarm sounds when I turn it on

  My laptop is a Presario F700 l PC, Vista operating system.

  We live in Italy and service broadband and wireless local apartment acquired last week.  We also bought and installed a Canon printer.  This computer was used in Italy before.  It was purchased in 2008 and also used in Manila and Yokohama.  I just had 'set to top' and checked before leaving the United States in September.

  I do not have the complete operating manual and I know what a yellow light on the front does mean something but I have no idea what.  The computer has been acting 'strange' for about a week in which he wont 'stay' at the top of a list of e-mail, the Office does not 'click', and it activates a different screen of the selected.

  IM technologically dim and this computer is my only link with "House" and my source of planning in Italy-travel. "  Im trying not to panic.  Thanks for your suggestions.

  Thank you very much for this - it's reassuring to know the resource and quick response is there.  I had already tried a solution I found online fixed 1/2 of my questions, but feel sure that these steps will finish my dose.  Thank you very much.

• How can I create a network and put in on my iphone 4S for use with wifi?

  I have a phone, a personal hot spot 4s, a router and a broadband cable. Everything is running but I can't figure out how to get my network on my iPhone for use with Wifi.  Also, I don't know how or where on the phone to set the password and since I don't have a different password, I can't use my wifi?  Help, please!  My iPhone tech is exhausted and I'm going against a brick wall with my internet service who refuses to provide me with their ISP, etc.

  Hello

  Please ask your question the following support forums.

  iPhone: Apple Support communities:
  https://discussions.Apple.com/community/iPhone?CategoryID=201

  Concerning

• Network connection problem Wifi (Ralink RT5390R...) and Ethernet LAN (Realtek PCIe...)

  Hello

  With my HP Desktop Pavilion P6-2417eb on a 64-bit Windows 8.1 platform, I have serious problems to connect to a network or the internet. The office is connected to a router with wifi capabilities and modem broadband with wireless internet capabilities.

  Several other devices (computer laptop Lan and Wifi; Android tablets; IOS Tablet; netbooks; NAS server) are connected to the network via wifi and Ethernet LAN calbe with no problems.

  After a long period of crossing possible problems, I come to the conclusion that it is a problem of my dekstop PC-related equipment. In the past, a reboot of the desktop computer was enough to settle the problem, but these days it is no longer possible. This afternoon I was able to connect for 15 min and after it ended again. It was the first in a week again. I post this message with my laptop. I have 4 possible for Internet connection but no wok with this desktop computer.

  The following products do not work in my desktop pc:

  • Ethernet Lan, Realtek PCIe GBE Family Controller
  • WiFi, Ralink RT5390R 802.1bgn Wifi adapter

  What can I do? What are the solutions?

  Thanks in advance for any help.

  LB1503

  Hello:

  The only suggestions I can offer would be to see if updating the drivers for these devices help everything.

  Here is the latest driver for the card directly from Mediatek (Ralink) wireless:

  RT2790 / RT309X / RT35X2 / RT539X / RT3290 / MT7630)

  15/04/2014

  V5.0.46.0

  Win7 32/64 Win8 32/64 Win8.1 32/64

  Here is the latest driver for the ethernet card.  Download and install the third-party driver on the list.

  http://218.210.127.131/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• receive error message when downloading from virgin mobile broadband

  during the installation and download broadband Virgin mobile I get the message there is a problem with this windows package install. A required script for this installation to complete could not be run. script error-2146828218, microso

  Hello

  1 are you referring to the installation of the driver software mobile broadband?

  Follow these steps and check if the problem persists.

  Step 1:

  I suggest you unregister and reregister the Windows Installer Service and check if the problem persists.

  Follow the steps in this article.

  http://support.Microsoft.com/kb/315353

  Step 2:

  Install the program in a clean boot State.

  Note: The steps in the article to restart your computer in normal mode.

• WAG54G2 DNS settings

  Hi all

  I have a very weird.

  I have a WAG54G2 and I'm trying to update the DNS settings on the router. I put in the new details, they record without any problem. However when I disconnect/connect or reboot and check the status page they do not seem to be updated. However if I go back to the Setup page the new DNS settings are there.

  I had a good hunt on Google and forums but can't seem to find anything useful.

  Any ideas are appreciated.

  See you soon

  Steve

  If you then attempt to static DNS entry of the side LAN on the router configuration page, you won't be able to see it on the status page of the router as DNS is on the side of the LAN, not on the side of WAN.

• Windows live mail has simply ceased to send emails (although it seems that emails are sent and are in the sent box, they are not received by the recipient)

  Hi, I use an old address of e-mail fsnet.co.uk and my broadband provider is talktalk.  Only this week just stopped it working and I cannot work out why.

  I get no error at all and it seems that it sends mails and is very well receive emails (apart from when I try to send myself).

  I have windows 8 and had a lot of problems last year, but it has been fine since.

  Help please :-)

  Thank you

  G.

  Graham

  Corresponding to the amount of talktalk users who are faced with problems that just started this week, I suspect they changed something and it would be best to contact them.

• Turn on the mtu on cisco switch and cisco user server

  Hi all

  someone got bad luck turning on the mtu on their cisco switch?  I guess I need to turn it on for all because the command is for all ports on cisco catalyst and my server switch is nearby to my user of switches and a broadband bandwidth 6 G or 6 ports, I need to turn it on for all user ports?

  Thanks for any comments, that you can add.

  I assume you mean Jumbo frame support! You shouldn't have any problems with that. Please take a look at for example http://www.cisco.com/en/US/products/hw/switches/ps700/products_configuration_example09186a008010edab.shtml for more details and the configuration of the different switches. According to the model, the parameters are for dedicated ports only or the entire switch. In the case of the switch everything you will need to reload (reboot) switch, so be careful.

  André