WAG54GS allows wireless clients to connect but will not assign IP addresses for full connectivity

I have three XP 3 computers connected between them in a MS home network via a wired hub and access to the internet through a wired connection to a router WAG54GS.  DHCP is enabled on the router, the IP addresses are correctly assigned and internet access to these computers Wired is not a problem.

In the past, I've connected also with success of laptops to the internet via the feature wireless router, but having not used that for a while, I think now it will not work.  I tried to connect with laptop computers running XP 2 and Vista Home and the problem is the same.  Laptops find broadcasting wireless router and connect but they are not assigned IP addresses during the phase of "Acquiring IP address" resulting in a "Limited or no connectivity message."  Packets are sent to the router, but none are received in return. It is with the strength of the Signal at 73% and the quality of the link to 100%.  Ipconfig displays no deafult assigned gateway and the IP auto configured to be 169.254.96.1 for example.  Ping the router gives "Destination host unreachable".  Not surprisingly, laptops are able to 'see' other computers wired on the MS. network  These laptops connect correctly to the MS network and internet if I change the wired connection.

If I check the status of the network wireless router configuration good laptops MAC addresses are displayed, but the computer name and the IP address are missing.  I usually use a protection WEP 128 bit on two channels 6 and 13, but it makes no difference if I change this without guarantee, once again the connection occurs, but no IP address is assigned.  DHCP is enabled in the tab for basic configuration of router from 192.168.1.100 with selected up to 50 users DHCP (and DHCP works very well for cable customers).  The IP address of the router is set to 192.168.1.2.  Wi - Fi router is set to "allow everything".  Default settings are used for the parameters wireless advanced, although I tried to reduce the 100 interbval tag at 50 and the RTS and Fragmentation threshold to 2304.  The policy of Internet access on the router is disabled.

If I have (for purposes of testing only) connect laptops to one of my neighbors secure networks (there are several) to connect laptops very well so I can access the internet, DHCP works great on laptops.  Firmware is v1.00.08 (I looked this modernization, but while I can identify my router version 1.2 downloads talk about types of Annex A and Annex B are mutually exclusive and I'm not clear I have.  I am also doubtful as to if the firmware upgrade would make a difference, because there is no trace of the upgrade solve this kind of problem and I had the Wireless does not work if long ago).  I'm running out of ideas, is there something that I missed?

Well in this case you can try to upgrade the firmware of your router, go to the website http://www.linksysbycisco.com/UK/en/support/WAG54GS/download...insert of your router model serach tab... select the correct version of your router... Download the firmware file... save this file on the desktop.

Follow these steps to upgrade the firmware of the device: -.
Open a page in Internet Explorer browser on a computer hard wired to the router...
In the address bar type - 192.168.1.1... Leave the name blank username & password use admin lowercase...
Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

Now reset your router:
Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

Once you re-configured settings of your router, and you are able to go online Wired computer, here are some settings that you can configure your wireless router, I think this might solve your problem

Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1
Let the empty user name & password use admin lowercase...
For wireless settings, follow these steps: -.
Click on the Wireless tab
-Here, select manual configuration... Wireless network mode must be mixed...
-Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

-Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
Please take note of the name of the wireless network (SSID) because it's the network identifier...
For wireless security: -.
Click the sub-tab under wireless > Wireless Security...
Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything... Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings... Please note the 1 WEP key as it comes to the security key for the wireless network...

Click the settings advanced wireless
Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
Now let's see if you can locate your wireless network and try to connect... And check if you are able to navigate.

Tags: Linksys Products

Similar Questions

  • Photosmart premium all in a defiler of c309a wireless radio is on, but will not recognize network

    Using a laptop computer Dell windows 7 with my printer and it works well. All of a sudden, my wireless to the printer indicator is on, but I can not get the printer to recognize the network at all, and obviously can not print from my wireless laptop. Works very well by USB.  I ran all the diagnostic tools on the site of hp, nothing helps... The printer is only 18 months - old do not throw out just for that! Any ideas how to solve this problem? I have reset the router, hard to reset the printer and followed all the steps of the Diagnostics. I'm puzzled!

    I feel like a real dope. But this correction is so simple and cost nothing. You need not map the c309A wireless. What I did, is running a network cable to the back of the printer to my router (one of taking four behind) which automatically added the printer to my home network. So all I had to do after is go to the "Add a printer" Wizard on my computer laptop windows 7, let the wizard find the printer, which she did, and it works very well, from anywhere in the House. I don't know why I didn't think this earlier.  I'm not an expert, just do a lot of trial and error and I usually understand. I woke up in the middle of the night and thought of this. Feel really stupid! But what surprises me, why the guy from HP offers this? What is with that?  (by the way, I found the part, but they wanted bucks 48.00 plus 12 for shipping.) What a scam! That's not your job, it's Mr. HP guy?

    WOOHOO!

  • my cd player can read cd/DVDs, but will not recognize a cd for copy/writng? Help

    I have 2 drives, both reading and playing, but both say "insert disc" and will not recognize when I insert discs

    try to copy videos from hard disk and trying to copy music from the hard drive.

    suggestions?

    Thank you

    Grant

    The following links may be worth a visit:

    (982116) your CD or DVD drive is missing
    or is not recognized by Windows or other programs
    http://support.Microsoft.com/kb/982116
    (Windows XP / Windows Vista / Windows 7)

    Your CD or DVD drive cannot read or write media
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    Good luck...

  • E3000 will not assign IP address

    I have trouble getting a desktop PC running Windows XP SP3 computer to connect to the E3000.  It has a Linksys wireless adapter.  Using Linksys Wireless Manager I try to connect.  It is said the Wifi on the E3000 button and then press the 'Connect' button.  It is for a long time and then fails.  The wireless icon in the system trap show: status: network address acquisition.

    The E3000 appears in the list of routers and force signel is great.  I tried the security key entering manual method and it does not work.  No idea why it won't work?  It used to work but then abruptly stopped.

    Thanks for the tips.  I tried to uninstall Linksys Wireless Manager, reboot, and use the Windows, same problem Wireless Manager.  Tried to uninstall the wireless card software, reboot and reinstall, same problem.  Uninstalled again but this time I cycled the power on the E3000 before reinstalling, and then it worked.  Something funky happened to the router.

    Thanks again for your help.

  • Wireless card detects WLan but will not connect to them - Satellite U300-111

    Hi all

    I'm in a mixture with a problem which I hope I could get a help from you all.

    My problem is that my wireless card detects networks wireless next to my laptop but when I try to connect to one that it doesn't connect at all. Even to my own wireless network.
    There is nothing wrong with my wireless network I got connected and tested several devices wireless Conect to it.

    Hopeing to get some sometimes you all on how to solve this problem.

    MY LAPTOP IS A TOSHIBA SATELLITE U300-111
    BOUGHT IN THE MIDDLE EAST
    MY WIRELESS CARD IS: INTEL (R) WIRELESS WIFI LINK 4965AGN
    THE DRIVER VERSION IS: 12.0.0.73
    WINDOWS VISTA 32 BIT
    SERVICE PACK 1

    Thank you

    H

    Reboot the router and try to establish connectivity again.

  • Win XP will not find the driver for my Canon Sx10 camera.

    Windows XP will not load the driver for my Canon SX10 camera. I had the camera for 3 years and have never had a problem with this load. I reinstalled XP and the same problem. Windows recognizes the camera but will not load the driver for it.

    I'll in Device Manager through the update hardware wizard I have try to install the driver manually, but I don't get the option of all available drivers.

    There is no drivers for this camera online, because I thought that Windows has the driver for this device.

    Thanks for the help,
    Ian

    Thanks for the reply. I reinstalled windows and it works fine now. I didn't want to go through the hassle of reinstalling everything.

    Ian

  • Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

    The title says it all really.

    I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
    Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
    Help, please.
    Thank you.
    original title: vista detection network but will not connect

    Hi JulianBeach,

    1. you have made no changes to the computer before the broadcast took place?
    2. What is the exact error message you get?
    3 is connected to the domain of the computer?
    4. what happens when you try to connect to the network?

    Try the steps from the following link:
    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Additional information:
    Wireless network card: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  • Satellite L350-14F find the router but will not connect

    Hello

    I just bought a new laptop Satellite L350-14F, but I can't seem to connect to my connection wireless broadband.
    My roommate's laptop connects fine.

    The mine finds the network, asks for the WEP key but will not let me.

    I am running Windows Vista SP1.

    Can anyone help?

    Hmm. I recommend you to check the settings of the WLan router.
    If the MAC address filtering enabled and that your WLan MAC address was not included in MAC address filtering, then you would not be able to connect to the router.

    It would also be possible that you try to insert an incorrect encryption key

    Therefore, it would be desirable to disable all the security settings on the router and then try to establish the WiFi connection.
    If this would have functions, then you might reactivate the WLan security settings.

    By the way; Check if an update of the Wlan driver could also sometimes there is some compatibility problems between the Wlan router and Wlan card drivers.

  • Watch WiFi is connected but will not connect to internet

    I have an iPad 2 which, all of a sudden (in the Middle streaming), is more connected to the internet.  I rest the network settings, when this does not work, I have reset all settings, stopped and rebooted, all done basically.  It shows that its connected to my WiFi, but will not connect to internet.  All the other devices in my house work, then there must be a problem with the iPad.

    Reset the router: just pull the power for a few seconds and reconnect. No parameter to get lost.  Other devices operating with success is not serious. The router has probably received an invalid address for the iPad.

  • Try to synchronize a mobile laptop and it connects via bluetooth, but will not be synchronized

    try to synchronize a mobile laptop and it connects via bluetooth but will not synchronize what I am doing wrong

     
    Moved from feedback
    Original title: device

    "You run a form any of sync on the PC software, usually supplied with the ' phone or available for download on the ' phone manufacturers site.

    As you do not tell us that "phone and helps OS it runs there is little more we can give."
  • How do I know if the wireless clients are connected under mode N

    Hello

    I would like to know if there is a way to know that wireless clients are connected in N mode. There is some sort of command where can show me that? I Don t have a wireless controller. My access point is AP-1141N-A-K9

    thnks!

    Unless you have a WLC, the answer is 'no '.

  • Installed on the new laptop, but will not work as wireless? It does not support this device?

    I have the new series g of HP Pavilion... running windows 7. installed HP office jet J4680 and works through usb cord but will not work as wireless... will not be in place.

    You are running windows 7 starter edition?

    -to know

    -Right click on computer

    -Select Properties

    -Look for the system type

    Also, what processor do you have?

  • HP 8600; Printer says it is ready for wireless printing, but will not print my documents. It prints all the pages of the test very well. What I am doing wrong?

    Printer says it is ready for wireless printing, but will not print my documents. It prints all the pages of the test very well. What I am doing wrong?

    Contact HP support.
    http://h10025.www1.HP.com/ewfrf/wc/pfinder?cc=us&DLC=en&LC=en&tool=&query=8600#n251

  • image acquisition, it says it is allowed, but will not download without watermark

    image acquisition, it says it is allowed, but will not download without watermark

    Follow these steps in the screenshots in this post: I downloaded my 10 free images and they all have the Adobe watermark on them, so I can't use them. Why do they have a watermark on them?

  • Portable keyboard on Vista you will sign in with my password, but will not type after that

    * Original title: keyboard on my laptop computer vista will allow me to connect with my password, but will not type after that. I use a screen keyboard and mouse to this type. I even restored to factory settings. Always won

    My keyboard on my computer vista laptop will only sign in with my password, but will not type after that. I use a screen keyboard and mouse to this type. I even restored to factory settings. Still will not work. Checked ease of access settings and language settings, running of ideas. I tried another keyboard, failed to mention. Re-installed drivers as well. Any help would be great.

    Thanks for your reply. I tidied up my lap top for about 5 months and just used my office for awhile. One day I was in the mood to tinker around with my lap top, then when I turned it back B I N G O!  My main advice worked again. Matter of fact, I use it now. Thank you for your effort in the e-mail back me on this issue. good karma can follow you anyway yoy travels take you.

Maybe you are looking for