Wait for the date / time of changes

Similar Questions

• Storage VMotion - a general error occurred: could not wait for the data.  Error bad0007.

  People,

  I searched through this forum and have not found an answer that works in many positions out there, I say to myself that I would ask him once again.

  Here's the context:

  We have 12 identical Dell M600 blades in 2 chassis with 16 GB of Ram, 2 x Xeon E5430, they are all connected to an Equallogic PS 5000XV iSCSI SAN on a separate iSCSI (vswitch1) with 2 cards network dedicated network and dedicated switch, console svc iscsi dedicated, dedicated VMkernel port for iscsi access. Net access (vswitch0) contains port groups VM for our various networks and a console port and vmkernel svc for VMotion with 2 separate NETWORK cards as well.

  We are running ESX 3.5 U3 and VCenter 2.5 U3 on Win2k3 R2

  VMotion works between all servers, Storage Vmotion works for most machines, HA works and the value 2 host failurs with no monitoring of vm, DRS is set to manual for now I have a few machines on the local stores that I complete my rebuilt LUN, there is no set of rules for DRS and VMware EVC is enabled for guests of the Intel. However, I'll just describe one machine to do svmotion below.

  Here's the problem:

  I'm trying to Svmotion via svmotion.pl - interactive, a Machine to Windows 2000 with a virtual disk and a virtual RDM. I am aware of the requirements for the RDM and required parameters for svmotion, independent is not selected for the RDM, and I also have svmotioned several machines linux and win2k3 with the same configuration without problem. In the interactive session, I choose to individually place the disks and I chose the virtual disk to only the virtual machine to be moved, essentially, as I saw it move vdisk virtual machine and then copy to the pointer of the RDM.

  The use of the processor in this machine is about 25% average. but I try to run migrations at the time the lowest. and The Host it itself shows only about 5.5 GB of the 16 GB of RAM used. so I think we're good on the RAM. the volume/datastore that I'm migrating from has 485 GB free and the volume/datastore I migration towards a 145 GB free. the VM virtual disk is only about 33 GB.

  I run the script the windows version of the RCLI svmotion. and when to begin the process, I get the following error at around 2 percent of the progress:

  "Since the server has encountered an error: a general error occurred: could not wait for the data."  Error bad0007. Invalid parameter. »

  After searching around, I found the following hotfixes to the U2 release notes

  • Migrate.PageInTimeoutResetOnProgress: Set the value to 1.

  • Migrate.PageInProgress: The value 30, if you get an error even after the setting of the Migrate.PageInTimeoutResetOnProgress variable.

  I've made these changes, and I still get the same error.

  When I dig in the newspaper, I see these entries in the journal of vmkwarning:

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1397: migHeap0 already at its maximumSize bunch. Cannot extend.

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1522: Heap_Align (migHeap0, 1030120338/1030120338 bytes, 4 align) failed.  calling: 0x988f61

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: migrate: 1243: 1235452646235015: failure: out of memory (0xbad0014) @0x98da8b

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: MigrateNet: 309: 1235452646235015: 5 - 0xa023818: sent only 4096 bytes of data in message 0: Broken pipe

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu6:1396) WARNING: migrate: 1243: 1235452646235015: failed: Migration protocol error (0xbad003e) @0x98da8b

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: migrate: 6776: 1235452646235015: could not send data for 56486: Broken pipe

  At this point, I'm stuck... What is Windows RCLI? the vcenter Server? or the service console with not enough of RAM? We have already increased all our consoles service 512 MB...

  Any help would be greatly appreciated...

  Thanks in advance.

  Alvin

  The vmkernel on out of memory error, I had that before. And vmware support recommends setting 800M Max service console memory. And I did it and have no problems after that.

  See if that helps the issue.

  Mike

• HA elections issues, getting only one agent as master and waiting for the second time

  I am facing a strange question HA.

  Much more kit (2 hosts, vcenter) virtual, DAS storage. VSphere 5.1 latest patches. 1 datacenter, 1 together inside with 2 guests.

  While trying to activate HA (with default settings), an election was held where a master and an error in time-out for the second host. Funny thing is that if I force a new election manually on the two hosts, the first I click to become master, second error timeout showing later.

  The two machines are able to ping the other subnet vmotion and network management subnet.

  I triple check the connections & Configuration of VLAN on the physical switch-> no other success

  I changed vswitch assignment & design in at least 4 different ways-> no other success

  I did break the cluster and datacenter, recreate new-> same question.

  I took both of my hosts (1 at a time) off the VirtualCenter and back in--> no other success

  I do NOT recreate my vCenter (of less not yet...)

  I have NOT reinstall any of my guests from scratch (of less not yet...)

  All constructive ideas?

  There is a kind of strangeness network here. FDM on each host cannot see the election messages sent by the other (on port udp 8182) so each one chooses himself as captain and brand a title "fdmUnreachable". They mark the other as network partitioned because they can ping (using icmp). It's just the udp/TCP traffic 8182 which is not cross.

  Elisha

• My names of files in Flash CS6 change every time I have save for the first time

  When I got Flash CS6, I worked on an animation and has called "grumpy." Now, 2 years later, whenever I'm doing a project in Flash and save it for the first time, he adds "": grumpy ' at the end of the file name. "

  For example, I'm working on a project now with the point leader name "2_1.fla segment." When I recorded it for the first time, it changed to "segment 2_1.fla*: grump.»  Adds it at the end of any project, regardless of the type (ActionScript 3.0 or 2.0).

  I have no idea why Flash is doing this, because this project is not connected to the original 'grumpy' somehow. I don't know how to remove it, either. Any help would be appreciated! Thank you!!

  reset your preferences - flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  you could also disable AutoSave to see if that solved the problem.

• root properties in the connected data store: error when accessing the date/time storage

  When you browse the properties my connected data store I get an error message when you try to read the value of the property of 'storage date/time': object doesn't support this property or method.

  Here is a minimal example:

  Dim oMyDataStore, MyProperty, oMyProperties
  
  Set oMyDataStore = Navigator.ConnectDataStoreByParameter ("TOC", "" & "C:\Program Files (x 86) \National 2012\Examples\Data\Example_data.tdm" & "" ')
  
  Set oMyProperties = oMyDataStore.RootElements (1). Properties
  
  For each MyProperty in oMyProperties
  
    Call MsgBoxDisp ("property name:" & MyProperty.Name & + "\n"&"property value:" & MyProperty.Value "")
  
  Next

  Why can I not access this particular property by default?

  Hi Phex,

  for the date/time properties, an object called UsiTimeDisp is returned. This object allows to that extend features of service as access to each part separately (day, year, hour, seconds,...) of your date/time value. If you want to print the value of time with MessageBoxDisp, you can use the VariantDate this object property.

  Your code might look like this then:

  Dim oMyDataStore, MyProperty, oMyProperties
  
  Set oMyDataStore = Navigator.ConnectDataStoreByParameter ("TOC", "" & "C:\Program Files (x 86) \National 2012\Examples\Data\Example_data.tdm" & "" ')
  
  Set oMyProperties = oMyDataStore.RootElements (1). Properties
  
  For each MyProperty in oMyProperties
  
    MyProperty.DataType = eTime Then
  
      Call MsgBoxDisp ("property name:" & MyProperty.Name & + "\n"&"property value:" & MyProperty.Value. ' ") VariantDate)
  
    On the other
  
      Call MsgBoxDisp ("property name:" & MyProperty.Name & + "\n"&"property value:" & MyProperty.Value "")
  
    End If
  
  Next

  I hope this helps.

  Good day

  Eva

• I can't change the date & time to receive automatic updates of Windows XP - help!

  How can I change the date & time to get automatic updates - I've tried everything and did what I was asked to do - still not able to do!       Lin

  What happens when you try to do?

• How can I change password to get into my computer? I am now in my computer, but want to change for the next time I open it.

  How can I change password to get into my computer?  I am now in my computer, but want to change for the next time I open it.  Thank you.

  Click Start, click your account at the top right picture, click on 'change your password '. You must then enter the old password and a new.

• HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page. Can anyone help

  HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page.  Can anyone help

  Hello Gloria,.

  I ask you to execute methods in the following link and check if the problem is resolved.

  Solve printer problems

  You can also contact the manufacturer to find out how to clean the print head.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  Please get back to us with the State of the question.

• Wait for the event begins with SQL * Net message from client-time wait 178577 units

  Hello
  
  I'm watching events waiting for a request from long time in TOAD.
  I start the query on an instance of TOAD, and open the browser to log on to another instance.
  But I am surprised to see that in "TOtal expected" on the RIGHT part->
  SQL * Net message from client is the longest time and is already - > 178577 units while I just to start the query.
  
  Considering that, in the current waiting she shows DB file scattered read correctly for a few seconds.
  
  Please suggest.

  user8941550 wrote:
  Hello. No explanation for this... :-(

  Hello

  people work here, you don't know?
  I think Tom Kyte explains it well enough. This wait event is linked to your session database waiting for the guest to say to do something.

  So it is not related to the database, but to your application.
  Also as it is a wait of session event you might have had your session inactive for some time (do nothing)

  If you want to check the waiting events correctly I suggest using tkprof and start a new session in SQL more as shown by Tom Kyte in the link I posted.

  Then, run your query in sqlplus setting track and pull it out as soon as your statement is completed.
  that is to say:

  -- myest.sql
  alter session set events '10046 trace name context forever, level 12';
  SELECT ... -- your query here
  exit
  

  Run in sqlplus in this way:

  sqlplus user/password@db @mytest.sql
  

  Then check with tkprof.

  Kind regards.
  Al

• How to get the date and time that a procedure/function has been modified for the last time?

  Hi all
  
  In Oracle Developer Tools for Visual Studio 2005 can I highlight a function, or a procedure and in the Properties window, it shows me the func/proc has been changed for the last time, and also when it was created
  
  Where can I get this information?
  
  See you soon
  CJ

  table object last_ddl_time

• waiting for the task to be completed

  I inherited a program that tests a hardware device extensively.  A test turns or several times each channel of AI and bed the waveform of channel I.  I use a card PXI-6229 DAQ with c# .NET.  The program is suspended in the while loop, wait until the task is complete. This is the code:

  public bool TestThisChannel (object nullObject) {}
  Double coversionFactor;
  String name;
  String Description;
  _PXI6229_SLOT12.getChannelInfo ((int) nullObject, name, coversionFactor, to the Description);
  _PXI6229_SLOT12. StartAnalogInput6s (Name);
  for (int i = 0; i)< 5;="" i++)="" {="" 5="">
  _PXIChassis.SetPowerRelayOn (null);
  _PXIChassis.Wait500ms (null);
  _PXIChassis.SetPowerRelayOff (null);
  _PXIChassis.Wait500ms (null);
  }
             
  While {(_PXI6229_SLOT12.runningTask!=null)}
  } //Wait task is completed

  AnalogMultipleInputTask private task;
  runningTask of public work;
  private AsyncCallback analogCallback;
  Private AnalogMultiChannelReader analogInReader;
  public AnalogWaveformdata;

  Public Sub StartAnalogInput6s (string AIChannel)
  {
  Create a new task
  try {}
  AnalogMultipleInputTask = new Task();

  Create a virtual channel
  AnalogMultipleInputTask.AIChannels.CreateVoltageChannel (AIChannel, "",)
  (AITerminalConfiguration) (-1),-10, 10, AIVoltageUnits.Volts);

  Configure synchronization settings
                 
  AnalogMultipleInputTask.Timing.ConfigureSampleClock ("", 100000, SampleClockActiveEdge.Rising, SampleQuantityMode.ContinuousSamples, 600000);
                 
  Check the task
  AnalogMultipleInputTask.Control (TaskAction.Verify);

  Prepare the table for the data
  runningTask = AnalogMultipleInputTask;
  analogInReader = new AnalogMultiChannelReader (AnalogMultipleInputTask.Stream);
  analogCallback = new AsyncCallback (EndAnalogInput);

  For .NET Framework 2.0 or a later version, use SynchronizeCallbacks to specify that the object
  Marshals the callbacks on the appropriate threads.
  analogInReader.SynchronizeCallbacks = true;
  analogInReader.BeginReadWaveform (600000, analogCallback, AnalogMultipleInputTask);
  } catch (Exception exception) {}
  MessageBox.Show (exception. (Message);
  runningTask = null;
  AnalogMultipleInputTask.Dispose ();
  }
  }

  public void EndAnalogInput (IAsyncResult ar)
  {
  Try
  {
  If (runningTask is ATR AsyncState)
  {
  Read the data of the channels
  data = analogInReader.EndReadWaveform (ar);
  }
  }
  catch (System.exception DaqException)
  {
  Display errors
  MessageBox.Show (exception. (Message);
  runningTask = null;

  AnalogMultipleInputTask.Dispose ();
  }
  }

  Any help will be appreciated.

  Thank you

  Howard

  Thanks Mason. You got me thinking on the right track.  I made a few changes based on an example I found of NOR.  I changed analogInReader.BeginReadWaveform (...) of data = analogInReader.ReadWaveform (600000) and I changed the while (_PXI6229_SLOT12.runningTask! = null) {} to _PXI6229_SLOT12.runningTask.WaitUntilDone () and it seems to work fine.

  Thanks for your help.

  Howard

• Start stuck on "Please wait for the Local Session Manager."

  I would say that this problem started a couple of days. Went to start my laptop (Toshiba) and he sat on the "Please wait" message forever.

  Had no problems to start in safe mode. Looked up various ways of addressing the problem.

  Was able to change the resume date and back a few weeks ago. Still no luck. Happened to read something on a printer Epson being perhaps the problem driver (it was installed a day before the date of restoration chosen). Uninstalled the drivers, computer still does not start.

  Tried restarting running. I do not have the CD it came with Vista, but it was an option when you hold F8 during startup (I think?) Couldn't find any problems.

  Ran check on memory. No problem either.

  Changed settings for a verbose startup and ran a Diagnostic startup - all good for this. Then tried selective startup load system services... This is when the error occurs. When starting, it hangs on "Please wait for the Local Session Manager" and does nothing more.

  I looked in the event viewer to see what came that time and a couple mistakes were:

  Event ID 6000: winlogon notification subscriber was unavailable to handle a notification event.

  Event ID 7026: the next (s) start or start failed to load system
  spldr
  Wanarpv6

  It would be very useful for me not having to run my computer in safe mode automatically all the time, although it is useful that I at least have that option. Any help is greatly appreciated.

  Hello

  1. by chance your computer is connected to a domain environment?

  2. as you mentioned in your article that you tried the selective startup, I want to confirm if you have disabled the services left 3rd after hide Microsoft services?

  If you did not disable these services make sure you disable and then check if it works.
  See the article below for more information.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Please wait for the customer to political group - stop questions

  Hello

  I have problems with the closing of a machine. When the machine is connected to the corporate network, everything works fine. However, if the computer is connected to the VPN (1 hour or more) it is always suspended when it stops. First step in the shutdown process is:

  Please wait for the system event Notification service.

  This change after 3 minutes exactly. Next step:

  Please wait for Group Policy client windows 7

  is never exceeded (even after a few hours). Machine never off.

  Under newspapers there are always these 4 events when the machine stops in vain:

  1. 6005: the winlogon notification subscriber takes a long time to handle the notification event (Logoff).
  2. 4627: the event COM + a system expired attempt to fire the method of logging on the event {D5978650-5B9F-11D1-8DD2-00AA004ABD5E} class for the Publisher and the Subscriber.  The Subscriber has not responded within 180 seconds. The full name of the subscription is "ISensLogon2". The HRESULT is 80010002
  3. 6006: the winlogon notification subscriber took 180 second (s) to handle the notification event (Logoff).
  4. 6005: the winlogon notification subscriber takes a long time to handle the notification event (Logoff).

  Sense has expired after 3 minutes while there is no event 6006 for GPClient and machine is stuck there for centuries (Please wait for the customer to group policy). I noticed in the system logs that before the machine hangs during the shutdown process there are these errors and warnings:

  • 5783: the session configuration for the Windows NT or Windows 2000 Domain Controller \\server for the domain X is not admissible.  The current CPP of Netlogon call on \\machine to \\server was canceled.
  • 1014: name resolution for the name of the server has expired after none of the configured DNS servers answered.
  • 131: NtpClient could not set a domain peer to use as a source of time due to the DNS resolution error on ". NtpClient will try again in 3473457 minutes and double the reattempt interval thereafter. The error was: the requested name is valid, but no data of the requested type was found. (0x80072AFC).

  There is more than 1014 events for different servers and some 131. 5783 is always alone.

  I did a group policy log, because I thought that I will be able to see where the machine stuck. Below you can see the part of the newspaper GPSVC when the machine stops in vain:

  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xe58
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancellation pending appeals
  GPSVC (2d4.1cfc) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x71a
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancelled waiting for calls
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (438.1a04) 21:31:24:327 waiting for user group wire political end.
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xe10
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancellation pending appeals
  GPSVC (218.C88) 21:31:24:327 Client_CompleteNotificationCall: failed with 0 x 525
  GPSVC (2d4.1cfc) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x71a
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancelled waiting for calls
  GPSVC (2d4.9C8) 21:31:24:327 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xdcc
  GPSVC (218.1054) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0x20cc
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.9C8) 21:31:24:327 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xd90
  GPSVC (218.1054) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (218.D48) 21:31:24:342 Client_CompleteNotificationCall: failed with 0 x 525
  GPSVC (218.D48) 21:31:24:342 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (218.1c04) 21:31:24:327 Client_CompleteNotificationCall: failed with 0 x 525
  GPSVC (218.1c04) 21:31:24:342 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: entering with the event 0 x 2100
  GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: entering with the event 0 x 1264
  GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0

  I excluded 1 GP machine and left on the VPN for a few hours, several times. He always stopped correctly.

  However I tried with the VPN disconnection before turning off the machine, I even turned off WiFi but machine still hanging. If I tried to get GP results it takes ages before stopping the machine and he's stuck in the step "to get the user name. Gpupdate/force will never update policy (it stops at policy update...). I tired with the installation of different patches that has not solved the problem.

  I think that there is that DNS issues while the machine is on VPN which led the GP cannot be applied. When the machine tries to close it is always somehow connected. There is no problem with the connection, no GP application script when the user disconnects, not roaming profiles.

  Does anyone have the same problems? All machines are Dell with Juniper NC (VPN).

  Thank you

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet forum: For Windows 7 

  Hope this information helps.

• Simultaneous Manager timed out waiting for the output postprocessor

  Hello
  
  I am facing this error for the first time:
  
  After processing the request failed with the error message:
  Simultaneous Manager timed out waiting for the post-processor of output at the end of this request.
  
  I went through the log of the OPP and that:
  
  [05/08/09 16:00:19] [UNEXPECTED] [49106:RT4628739] java.lang.reflect.InvocationTargetException
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:324)
  at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:624)
  at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:421)
  at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:233)
  at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
  at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
  at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
  at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
  at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
  at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
  at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
  at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
  at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
  at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
  at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
  Caused by: java.lang.ThreadDeath
  at java.lang.Thread.stop(Thread.java:630)
  at oracle.apps.fnd.cp.opp.OPPRequestThreadManager.terminateThread(OPPRequestThreadManager.java:207)
  at oracle.apps.fnd.cp.opp.OPPTerminateCommand.execute(OPPTerminateCommand.java:45)
  at oracle.apps.fnd.cp.opp.OPPServiceThread.processMessage(OPPServiceThread.java:240)
  at oracle.apps.fnd.cp.opp.OPPServiceThread.waitForMessages(OPPServiceThread.java:227)
  at oracle.apps.fnd.cp.opp.OPPServiceThread.mainLoop(OPPServiceThread.java:128)
  at oracle.apps.fnd.cp.gsf.BaseServiceThread.run(BaseServiceThread.java:135)
  
  I went through the various articles and notes in the metalink:
  
  I tried increasing the values in the following profile options to their default values in 700 900
  
  Simultaneous response time: OPP
  
  Waiting period of concurrent processes: OPP
  
  but no change, can someone tell me how to decide how many seconds must be used for the profiles that is to say based on parameters, etc.
  
  Strangley than what was going on when the data is over and for this combination of setting:
  
  The total number of records in the output is approximately 5000
  
  Please guide if I missed something.
  
  Best regards
  Mahi

  You had a bad code.

  changed and he sent.

  can you check and let me know?

• When you get a retailer to re - install Vista are you able to burn a copy of Vista as when he was the first new and turned on for the first time?

  Hello and Merry Christmas to all. Sorry its been a while that I had time to be on the forum, (family illness) Anywho my daughter had dropped her Lenovo and although we went through every conceiveable options to retrieve and detaches from the dreaded "black screen" we couldn't. We had the chance to recover his files before he died forever! That was the good part... I had to resume at Tiger Direct, where they installed a new concert 320 H/D and re-installed Vista. Because she graduated she had two of the residence and turned my basement into a hoarders paradise, lol point being that she has no idea where his original disk is so I contacted Lenovo who assured me that they would send me a copy of Vista (how naïve of me) they me sent recovery disc (two games not less and it took more than a month!) that I discovered after the fact that I could have burned my own through Neo-Smart...

  There is one thing that still bothers me and that's when we first pulled his new Lap Top for the first time and installed Vista I remembered that the very last paragraph said to make your own copy of the o/s before your done... what was not done! Is it still possible to make a copy of its operating system now? If Yes, how would go about this, if I wait for her to do it, it will not! She was lucky that I was able to use a slave to its hard disk of my XP Sata-IDE cable and get its files on the drive before it me locked. It has an external H/D as most of the people who do not know how to change their scores on the top of their Tower and get the full use out of them as desk top users do.

  As aways thanks for the fellow forumer for your time and trouble and any help is appreciated.

  Tiggerer

  Hello and Merry Christmas to all. Sorry its been a while that I had time to be on the forum, (family illness) Anywho my daughter had dropped her Lenovo and although we went through every conceiveable options to retrieve and detaches from the dreaded "black screen" we couldn't. We had the chance to recover his files before he died forever! That was the good part... I had to resume at Tiger Direct, where they installed a new concert 320 H/D and re-installed Vista. Because she graduated she had two of the residence and turned my basement into a hoarders paradise, lol point being that she has no idea where his original disk is so I contacted Lenovo who assured me that they would send me a copy of Vista (how naïve of me) they me sent recovery disc (two games not less and it took more than a month!) that I discovered after the fact that I could have burned my own through Neo-Smart...

  There is one thing that still bothers me and that's when we first pulled his new Lap Top for the first time and installed Vista I remembered that the very last paragraph said to make your own copy of the o/s before your done... what was not done! Is it still possible to make a copy of its operating system now? If Yes, how would go about this, if I wait for her to do it, it will not! She was lucky that I was able to use a slave to its hard disk of my XP Sata-IDE cable and get its files on the drive before it me locked. It has an external H/D as most of the people who do not know how to change their scores on the top of their Tower and get the full use out of them as desk top users do.

  As aways thanks for the fellow forumer for your time and trouble and any help is appreciated.

  Tiggerer

  Hey tiggerer

  NeoSmart is software startup repair not a recovery disk to reinstall vista

  and once you have replaced your hard disk you have lost the ability to do the recovery disk from the recovery partition that may have been defective hard disk

  and it depends on your version of vista as to whether you can now make a backup complete pc using microsoft software

  you need vista business or vista ultimate to backup full pc

  read information from microsoft about it at the link below microsoft

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

  If you have not these versions vista expect from lenovo recovery disks be delivered or buy a third party program to do a full backup pc

  one of these programs is the true picture in the link below

  http://www.Acronis.com/

  have a happy holiday season

  Walter, the time zone traveller