Wait until the acquisition is made
Hello
I need help. I did a VI that acquire and count the edges. The acquisition will be stop and go to another structure of matter once the counter to meet the requirement. However, it does not work as intended. See the image below (also attached).
What I want, that is, when the number of encoder line z reach certain value, all the acquisition will be arrested and go to the next case structure.
I can't connect the output of 'More' in the Stop button (like the figure below) it stops the program.
Hoping someone can help me.
Tags: NI Software
Similar Questions
-
Original title: CD corrupts and burn it
When I go to burn a cd with the music on this topic in windows media player, it starts very well. When it gets to 70-80% it stops and a window opens with this message.
"Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. »
There is nothing burn but these files. I made sure there was nothing waiting to be burned. I closed all the other windows. I lowered the speed at which it burns. Nothing works I've looked up online. WMP is updated too.
I can burn files very well. Photos and documents, I have a problem with. It cannot therefore the CD burner (not completely, anyway). I can listen to the songs on the CD where it suddenly stops.
If anyone has had this problem, a solution would be greatly appreciated.
Thank you
Hi Cory,.
This problem can also occur when your computer correctly detects the disc as a non-recordable device. Make sure that the registry key is set correctly for DVD player.
CD - R or CD - RW drive is not recognized as a recordable device (valid also for Windows 7 steps)
http://support.Microsoft.com/kb/316529/en-us
Registry warning
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://support.Microsoft.com/kb/322756/en-us
How to back up and restore the registry in Windows
I hope this helps.
-
Background:
I created a questionnaire in which the user must answer each question correctly before to proceed to the next slide. That's what I did:
- Set preferences Settings > required > respond to everything - the user must answer each question to continue
- Set the number of attempts at the level of the question to infinity
- Made the Next invisible button and disabled the PlayBar
In this way, the user can proceed to the next slide in the issue with the submission process - and, since attempts are endless, this means that after having answered the question correctly.
Current objective:
I want the user to be able to click on a prompt for a hint. To configure this, I did the following:
- Created a smartshape titled 'click_for_hint' to display the text that says: "click here for a tip.
- Created a smartshape labelled 'hint' text display
- Show "hint" success value "click_for_hint".
Now, when the user clicks on the text that says: "Click here for a hint," the suspicion appears. So it works - great! However, once the indicator is activated, I would like to for the user to continue endless attempts until respondent correctly to the question... and then only after answering correctly, proceed to the next slide.
The problem:
If the user has submitted one or more wrong answers, and then activates the indicator, the slide just waiting until the user has answered the question correctly. Instead, it will be set in playing, proceeding to the next slide. I tried the smartshape 'hint' to take a break on the success of adjustment, but it does not work.
Is there a way to make the slide to wait until the answer to the question correctly before moving on to the next slide, even after the indicator has been activated?
Are you aware that your required parameter can cause problems, the blocking of the user? It is also completely useless because you have unlimited attempts at the level of the issue and hid the next button (hope, you don't need review, otherwise, I would recommend not to hide this button but slide it under the Clear key: the Question slides in Captivate - Captivate blog)
The index problem is related to the fact that a simple gesture going out of reading. I would like to see the timeline of the slide, to compare the points of suspension form and the question slide button. And maybe this blog can also clarify difference between simple/advanced: Why choose Standard Simple action?-Captivate blog
Regarding the buttons on question slides form: buttons on slides of Question/Score of Captivate 6?-Captivate blog
-
How to have drop down menu in which we cannot continue until the selection is made
Hi all
I have a case in which I have 4 menu drop down and a button to continue, I want to make sure that a user cannot continue until the choice is made on all or at least some of the drop-down list. How can I do that.
Not get stuck at all! the button is "disabled" because it is what it is made also.
That fixed, it must be "enabled".
Hmmmm... looking at the source code we can easily see who wrote this bug in the first place. Shhh... don't tell on me.
-
Wait until the next millisecond several question
I seem to have a problem with the wait until the next millisecond VI. I put it to expect from 1000ms and I inside a loop that makes a bunch of stuff, yet my cards in the loop updates about 50 times every 60 seconds. I thought that maybe, it took too long to run everything in the loop, so he "missed" multiple next MS, but if that were the case it could be updated every 2 seconds. It wouldn't make sense not multiple integer.
So my code is a great sorta, if he is the obvious places I should look and see, in what concerns, why what is happening in a general sense and not specific to my program, I could try that first.
Thank you!
Your loop can go to the next iteration until all structures of the event have expired or been triggered by an event AND wait the 1000ms has elapsed.
It is difficult to solve the problems, you might want to rearchitect the code a little first. It seems that all the structures of the event are triggerend by the same event. You cannot combine all code into one? Use a structure of single event, not the event structures N!
Keep the pattern of a single screen. Get rid of all the structures of these unnecessary sequences.
Eliminate everything that the duplication of code. Why have a huge identical set of nodes of property in each case a case structure? Are not nodes of property after the structure of the case? Write to the properties when the value changes and not with each iteration of the loop.
Use local variables instead of nodes in value property.
Can you measure the loop with more conventional means to get a value of exact time loop?
-
Original title: 2 numbers do not know if they are related
I have 2 questions and I don't know if they are related. Several days ago I was doing some cleaning and uninstalling programs to free up space. I don't know what I started with, but it seemed to go ok. However, after all that I've tried to uninstall gave me the message: Please wait until the current program has finished uninstalling or one. I rebooted the computer more than once during this period, but it still says that.
Then my internet explore has stopped working just for 2 or 3 days. I've been using google chrome to access things, but it is rather slow.I ran repeated virus and malware scans my norton security and the microsoft Web site, and all said I am clean.Yes, it's windows 7 I appreciate the suggestions, but the problem was that he wouldn't LET me not uninstall anything. He gave me the waiting message please do anything, and he's not missing if I stopped and restarted. Finally, I gave up. I saved my files to my external hardrive and just do a full recovery of the computer. He solved the problem of installed programs and the internet problem explore both, although I hoped it would avoid going that drastic.
-
Please wait until the installer finishes determining your disk space requirements
I have a windows Xp, Im trying to download Windows live sign in assistant. It seems to be stuck in (Please wait until the installer finishes determining your disk space requirements) I'm not quite sure what to do, Ive has been looking for an awnser for quite awhile. Im trying to download a game called also age of empires online. If there is a way I can by pass this dl all together that would be even better. I just went to re - install the program and this is the link ( http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=15106 ), it is not windows 7 but I'm not sure if it would work for my windows Xp. This link pop when I run the games for windows marketplace... Thanks - Matt...
Well, I had it works for me without re doing not, but by going to my downloads and put back on the download I re install a couple of times and the same results, once I started it of my downloads, it worked like a charm! Hope this helps someone out there.
-
Try to uninstall Searchfly since yesterday. I continue to keep the message "Please wait until the current program is completed the uninstall". Help, please.
Hello
You are infected with malware.
Follow this removal Guide:
http://www.bleepingcomputer.com/forums/t/502760/how-to-get-rid-of-SF-searchfly/
See you soon.
-
Original title: Uninstalling questions
The problem is when I try to uninstall any program I get a pop up message saying "Please wait until the current program is finished uninstalling" or that did not uninstall or change a program for months! Any ideas would be appreciated
Hi Martin,
This error message is related to the windows service installed on the computer.
Before you begin to solve the problem, I recommend to restart the computer and verify if you are able to run the program.
If the problem persists, I suggest you follow the provided methods to solve the problem.
Method 1
Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:
(a) click on Start Menu
(b) type msiexec /unreg , and then press ENTER.
(c) click on Start Menu
(d) type msiexec/regserver , and then press ENTER.
Method 2
If the previous step fails, check if it has all the facilities waiting on the computer using the registry.
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the link below.
Back up the registry
For Vista: Back up the registry:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Empty registry key "in progress"
Check the following registry key:HKLM\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress
Empty/rename "PendingFileRenameOperations" registry key
Check the following registry key:
HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations
Hope this helps; Please get back to us with the results.
-
I get the message please wait until the current program is finished gel or one
I get the message please, wait until the current program is finished gel or be changed... trying to delete a program and have restarted and did a system restore nothing has fixed the problem...
Hello
try using the free program revo to remove a stubborn program
http://www.revouninstaller.com/revo_uninstaller_free_download.html
-
Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. ???
I just burn a CD with no problem at all. Using the same type of CD, brand new, I tried to burn another CD and got this error message:
Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.
I close all programs running, restarted my computer, changed on the devices tab, the speed of burning... everything I know to do and all the things I've read in these forums, no luck... still get the exact same message. No idea why my CD-writer has decided to stop working for me?
Hi Cierrajade,
1. you have any third-party DVD burning software installed on the computer?
Method 1
You can use the convenience store open playing and burning CDs, DVDs and Blu - ray discs built in Windows 7 and check to see if it helps you to trouble the CD plays the questions.
For more information about how to open the resolution of problems in Windows 7, go to the link below and follow the steps.
Method 2
If you have any third party CD\DVD software installed on the computer of engraving I suggest you uninstall and check back later if you can burn CDs with success.
Disc burning: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions
Method 3
If the previous step fails, check if you can burn CDs using Windows Explorer
Burn a CD or DVD in Windows Explorer
http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Original title: Lexmark printer
Hello
Thank you for helping me to get my laptop working again - after contacting the Microsoft Community, Microsoft and my ISP, my email seems to work so I can get all my incoming messages.
But I'm still having a problem printing. I tried to uninstall the Lexmark S605 and I get the message error "series Lexmark S600 is currently in use. Wait until the printer has finished printing and then uninstall. "I get this message even if the printer is turned off and unplugged.
Before I tried to uninstall, I tried to update the drivers from the Lexmark site and it says the update was successful, but nothing prints. Printer is no longer supported by Lexmark. Wireless connects, but I have also tried to make it work using the USB connection.
Printer print wireless from office, but not my laptop.
Does anyone have an idea on how to uninstall the Lexmark program?
Thank you
Agnes
Restart your computer and check the queue to printer in the Notification area, as suggested.
Click on the printer
Cancel all Documents
For more information, visit the below mentioned link:
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx
Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT
You can see the below mentioned links.
http://Windows.Microsoft.com/en-us/Windows7/install-a-printer
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer
http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer
-
Wait until the end of the transition between two images.
I'm developing an ActionScript 3.0 for Blackberry Playbook application.
I have twelve images loaded with a class Loader. I use Event.ENTER_FRAME melted and melted images using this event handler:
private function onEnterFrame(event:Event):void { imageToFront.alpha += 0.1; // slow fade imageToBack.alpha -= 0.1; if( imageToFront.alpha >= 1.0 ) { imageToFront.alpha = 1.0; // hide the first image imageToBack.alpha = 0.0; imageToBack.visible = false; // remove the enter frame event listener stage.removeEventListener( Event.ENTER_FRAME, onEnterFrame ); } }When a user clicks an image his manager fundraising click the following:
private function onImageClicked(event:MouseEvent):void { switch((event.currentTarget as Loader).name) { case imageCell11Back.name: imageToFront = imageCell11Front; imageToBack = imageCell11Back; break; case imageCell11Front.name: imageToFront = imageCell11Back; imageToBack = imageCell11Front; break; case imageCell12Back.name: imageToFront = imageCell12Front; imageToBack = imageCell12Back; break; case imageCell12Front.name: imageToFront = imageCell12Back; imageToBack = imageCell12Front; break; case imageCell13Back.name: imageToFront = imageCell13Front; imageToBack = imageCell13Back; break; case imageCell13Front.name: imageToFront = imageCell13Back; imageToBack = imageCell13Front; break; case imageCell21Back.name: imageToFront = imageCell21Front; imageToBack = imageCell21Back; break; case imageCell21Front.name: imageToFront = imageCell21Back; imageToBack = imageCell21Front; break; case imageCell22Back.name: imageToFront = imageCell22Front; imageToBack = imageCell22Back; break; case imageCell22Front.name: imageToFront = imageCell22Back; imageToBack = imageCell22Front; break; case imageCell23Back.name: imageToFront = imageCell23Front; imageToBack = imageCell23Back; break; case imageCell23Front.name: imageToFront = imageCell23Back; imageToBack = imageCell23Front; break; } stage.addEventListener(Event.ENTER_FRAME, onEnterFrame); imageToFront.visible = true; }I'm having the following problem:
If the user clicks on another picture until the previous image did not reach this image with a less than 1.0 alpha to alpha = 1.0 left TI.
In other words, I have to do something for the function onEnterFrame left the 1.0 alpha value.
Any ideas?
I tried with stage.hasEventListener (Event.ENTER_FRAME) to wait until the Manager came out, but it does not work (it's always return true).
My solution:
private function onEnterFrame(event:Event):void { imageToFront.alpha += 0.1; // slow fade imageToBack.alpha -= 0.1; if( imageToFront.alpha >= 1.0 ) { imageToFront.alpha = 1.0; // hide the first image imageToBack.alpha = 0.0; imageToBack.visible = false; // remove the enter frame event listener stage.removeEventListener( Event.ENTER_FRAME, onEnterFrame ); faddingCard = false; } }When a user clicks an image his manager fundraising click the following:
private function onImageClicked(event:MouseEvent):void { if (faddingCard) return; switch((event.currentTarget as Loader).name) { case imageCell11Back.name: imageToFront = imageCell11Front; imageToBack = imageCell11Back; break; case imageCell11Front.name: imageToFront = imageCell11Back; imageToBack = imageCell11Front; break; case imageCell12Back.name: imageToFront = imageCell12Front; imageToBack = imageCell12Back; break; case imageCell12Front.name: imageToFront = imageCell12Back; imageToBack = imageCell12Front; break; case imageCell13Back.name: imageToFront = imageCell13Front; imageToBack = imageCell13Back; break; case imageCell13Front.name: imageToFront = imageCell13Back; imageToBack = imageCell13Front; break; case imageCell21Back.name: imageToFront = imageCell21Front; imageToBack = imageCell21Back; break; case imageCell21Front.name: imageToFront = imageCell21Back; imageToBack = imageCell21Front; break; case imageCell22Back.name: imageToFront = imageCell22Front; imageToBack = imageCell22Back; break; case imageCell22Front.name: imageToFront = imageCell22Back; imageToBack = imageCell22Front; break; case imageCell23Back.name: imageToFront = imageCell23Front; imageToBack = imageCell23Back; break; case imageCell23Front.name: imageToFront = imageCell23Back; imageToBack = imageCell23Front; break; } faddingCard = true; stage.addEventListener(Event.ENTER_FRAME, onEnterFrame); imageToFront.visible = true; }I added a class Boolean faddingCard variable to control when onImageClick is thrown.
This solution is faster than Tweener or TweenLite.
Thank you very much for your help.
-
I got a subscription to Adobe Captivate 8 in February. Can I cancel my subscription 8 Captivate without penalty (as I'm moving to Captivate 9), or should I wait until the year is to be upgraded?
Subscription is not attached to the version of Captivate. You can download 9 Captivate and use the same subscription id. Make sure you disconnect from Captivate 8, as this is considered to be new use for instance of Captivate with the subscription ID.
Thank you
Sexy.
-
Cloud membership: do I have to wait until the year is to switch plans or it is possible at any time?
I asked a question, a week or two ago on the different monthly subscriptions and the possibility to pass from one to the other. My original question was if I was on the full package of $49.95 per month and he decided that I have not all demand I could spend the development plan of $19.95. I understand that I could not until the year is up on the plan. My next quest and I'm sorry I didn't ask this with right thread original, is if sign up for just the Illustrator application from $19.95 per month will have to wait a year to get up to the full monthly plan or which can be done at any time?
My original question was if I was on the full package of $49.95 per month and he decided that I have not all demand I could spend the development plan of $19.95. I understand that I could not until the year is up on the plan.
No need to wait until the year is upward. You can contact Adobe at any time to change the regime.
TR6speed wrote:
My next quest and I'm sorry I didn't ask this with right thread original, is if sign up for just the Illustrator application from $19.95 per month will have to wait a year to get up to the full monthly plan or which can be done at any time?
Can be done at any time.
Maybe you are looking for
-
How to tell if someone answered me in the Apple community?
Hi, I'm new to the community of Apple, and I just asked a few questions here. However, I have not received an email or notifications on all the answers to my messages. I checked my messages manually, then I discovered someone answered me. So, should
-
Skype prevents the removal of empty folders!
I use Skype only for Conference calls and interaction of students in university level and regular group tasks. In other words, I refuse any connection to anyone do not actively participate in a class with me at one time or another for the next two ye
-
Value of the argument of the Add method must be a date or UsiTimeDisp.
I am writing a code to allow users to define what to look for in the navigatro and then use the results for further analysis. But when I try to search by date of creation I get an error that says: "add the argument to the value of the method must be
-
New SSD - moving factory to new SSD HDD (windows7) BONES?
How to: move BONES (windows7) of the factory to new SSD HDD? Thank you
-
What is the best way to destroy a hard drive before discarding a computer?
I want to protect my personal information when I have an old computer. Should I use a program to erase all data, and if so, which programs are the best. Should I also drill three holes in the hard drive? Is it effective? What are the best things to d