wake the computer to run an antivirus scan

Similar Questions

• Why in the Device Manager, NIC, tab power management properties, allow this device to wake the computer check box is gray out?

  Why in the Device Manager, NIC, tab power management properties, allow this device to wake the computer check box is gray out?

  Here is the document

  http://www.RM.com/support/TechnicalArticle.asp?CREF=TEC438020

  See the Suggestion of Shekhar:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/missing-power-management-tabs/4dd34dfb-B0E9-4f62-8eb8-0b0689344281

  Political group to turn and set the option for the inside network card power management tab

  http://social.technet.Microsoft.com/forums/en/winserverGP/thread/50fdee7e-fdf7-4734-8079-3a3aa5556fdd

  Kelly XP Tweaks - on this page scroll down to #204.  On the right side you will see "power schemes/configurations of restoration.  Here are the scripts.  You should see a window with «do you want to run...» »

  http://www.kellys-Korner-XP.com/xp_tweaks.htm

  A link that did not work... TEC438020 http://www.rm.com/Support/TechnicalArticle.asp?cref=TEC438020.

  If you delete the start TEC438020 letters... This would have worked.   Sorry but for some reason that my shortcuts duplicate urls notice the end of the above url shows the same letters that I told you to remove.  Do not forget that in case it happens again in the future.  (God forbid)

• What happens when Task Scheduler is scheduled to wake the computer from sleep mode

  I have the windows vista Task Scheduler to wake the computer from sleep to run a command script. some tasks in the script work correctly and some do not. This is because the computer is "awake from sleep", whatever that means. This is not what is happening, because the tasks that the batch script runs when the computer is actually on, with display and all are very different tasks, it runs while the computer gets "awakened from his sleep", so what happens exactly when the task schedler wakes up the computer of mode sleep under vista? How is it possible to emulate a real awake state with the Task Scheduler to a State of sleep, according to a schedule?

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

• USB mouse - I don't want to wake the computer from sleep mode

  Windows 7 - I don't want my USB mouse to wake up my PC from sleep mode - some say go to Device Manager and uncheck the box 'Allow this device to wake up the PC' - I have in Device Manager - is this still possible?

  Hi David,

  Please contact Microsoft Community.

  As you informed in the query, you can not find to allow this device to

  wake up the PC in Device Manager.

  I suggest you follow the steps below to find the option.

  1. click on start.

  2. in the option Search , please enter run.

  3. in the run window, type devmgmt.msc.

  4. double-click on USB device in order to develop it.

  5. right click on the USB device and click on Properties.

  6. click on the power management tab, check allow this device to wake the computer.

  7. click on OK.

  For more information:

  On the power management

  https://support.Microsoft.com/en-us/KB/2740020

  I suggest you back up the registry and check if that helps.

  Back up the registry:

  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  Warning: serious problems can occur if you have any changes in the registry incorrectly. So, make sure to run back up the registry before you edit it.

  This information is useful. Please let us know if you need help with Windows, we are happy to help you.

  Thank you.

• Error - the computer is running an operating system Microsoft Dynamics CRM does not support for the installation of the Extension of reporting Dynamics CRM 2011.

  Original title: Dynamics CRM 2011 Extension of reporting facility.

  Nice day

  Asked me to install this program called Extension Microsoft Dynamics CRM 2011 report Authoring on one of our PC network operations.  The computer is a Dell OptiPlex 960 under Windows XP SP3.  When attempting to install the program, you get the following error message:

  The computer is running an operating system Microsoft Dynamics CRM does not support.  To install this product, you need to upgrade your computer to an operating system supported.  For a complete list of supported operating systems, see the documentation for Microsoft Dynamics CRM (http://go.microsoft.com/fwlink/?LinkID=181018)
  For additional detals see logfile C:\Documents and Settings\bcodom\Application Data\Microsoft\MSCRM\Logs\BIDSExtensionsSetup.log

  Now, normally, I just coordinates with the end-user to him upgrade to Windows 7, however, after watching on the download page of this application (http://www.microsoft.com/download/en/details.aspx?id=13818), I noticed that Windows XP is one of the supported operating systems that can be installed on.  In addition, after looking around on the Technet documentation, I was not given a definitive answer on whether or not this application is not supported on Windows XP.

  So, my question is creation of Microsoft Dynamics CRM 2011 report Extension works on Windows XP SP3, or do we let us upgrade this computer to Windows 7?  Thank you!

  Hi Bcodom,

  In dealing with the problem to install the Extension of Microsoft Dynamics CRM 2011 report creation, I would recommend you to post your question in the help link.

  http://social.Microsoft.com/forums/en/CRM/threads

  Hope the helps of information.

• I have a pavilion with Vista m9457c. Recently, it developed a problem in which the mouse or the keyboard you wake the computer from sleep mode more.

  I have a pavilion with Vista m9457c.  Recently, it developed a problem in which the mouse or the keyboard you wake the computer from sleep mode more.  I knew that the fan on the video card was bad, so I replaced the video card.  This does not solve the problem.  I did so that the keyboard and mouse could get the computer from sleep mode, but it is still not correct the problem.  If I let the computer to sleep, nothing happens when I move the mouse or press the Crescent Moon on the keyboard.  The screen remains dark.  Then I have to physically press the power button / stop and return to restart the computer. Help me, Obi - wan!

  Hello

  You can read the folloaing articles and see if it helps.

  The problems of wake the computer from sleep mode

  A Windows Vista-based computer resumes the mode not sleep if you move or click a USB mouse as the computer is switch to sleep mode

  Hope this information is useful.

• Failure — CPU fan comes on full blast when the computer is running. Will not stop unless the computer is off

  Fan comes on full blast when the computer is running. Won't stop unless the computer is turned off, or in low power state. Tech has replaced the fans, problem resurfaced after computer tech left. Everything else seems to work very well. Dell XPS One (all-in-One), Intel Core 2 Quad CPU, Q8200 @ 2.33 GHz, 4 GB RAM, OS, Vista 32-bit

  I suggest you get back the Tech to fix it properly this time, because they have replaced the fan.

  Or try Dell Support/Forums:

  http://support.Dell.com/

  Dell support at the link above.

  http://en.community.Dell.com/support-forums/default.aspx

  Dell's Support Forums at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Setting for "allow device to wake the computer" gray for the USB root hubs

  So I wanted to change the setting for "Allow the computer to turn off this device to save power" in Windows 7 Device Manager. I accidentally also selected "allow this device to wake the computer".

  I want to change the setting back to "Allow this device wake the computer", but it is grayed out.
  Anyone know where I can switch this back in the registry?

  Hi Cody,

  Thanks for the reply.

  I suggest you try following the steps provided in this Microsoft article knowledge based and check if it helps.

  Reference:
  Information about the configuration of a network card power management
  http://support.Microsoft.com/kb/2740020

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this information helps.

  Thank you

• Card power management half wakes the computer to Windows 7 network

  I'm trying to implement the jobs of the company for wake on LAN and strange problems. I have two identical workstations except one is 32-bit and the other is 64-bit.

  Each is an identical model HP and have identical network interface cards with drivers identical version and date.

  Yet, the power management options are different, and the awakening of behavior is different as well.

  

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E972-E325-11CE-BFC1-08002bE10318} \DeviceNumber

  The 32-bit computer, when PnPCapabilities. is the 280 value keeps the setting after reboot and load Windows.

  However, resetting back to 24 PnPCapabilities 64 bit machine or maintains 100 if set for it, but never loads Windows.

  Which means, the NIC wakes the computer, lights flash, screen flashes, but never actually loads Windows...

  Hello Russell,

  Thank you for your response.

  I appreciate your time.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpro

  Thank you

• When putting the computer to sleep and then attempt to wake the computer, it has been turned off.

  Original title: win 7, will not wake up from slumber died

  Just installed a new ssd and reloaded win 7 and all updates. When I put to sleep and try to wake the computer has been turned off. Although the keyboard lights, but I have to push the power button and the computer restarts and displays the screen of abnormal termination. Help

  This is what I found. Installation of Win 7 and the corrupted BIOS. Re-installed both and everything works well.

  Thank you

• My mouse and the computer to run slowly why? What must I do to fix

  My mouse and the computer to run slowly why? What must I do to fix

  Hello
  Follow the steps described in this guide: http://www.selectrealsecurity.com/slow-computer/
  It provides simple instructions on how to speed up a slow computer. If you have any questions, just ask. I hope this helps you.
  Brian

• keyboard will not wake the computer more

  I have a PS2 Keyboard with power options set to wake the computer from sleep mode, which she did from the day 1. He works now is more like that and I need to press the power button to wake the computer. As I say I checked in the Device Manager and everything seems ok there. Any other ideas?

  Computer is waking up with keyboard normally for the WSD print device disabling. However, again made the Device Manager and WSD print provider is now gone? I don't really like, but these machines seem to have minds that they own. I do not know something related to it will come back to bite me later, hope does not tho.

• Scanner (Officejet 7500) cannot find the computer when you use shortcuts scan to printer

  When you choose Scan to PDF, e-mail, etc., by using the scanning on the 7500 buttons it allows me to select the computer on the network (each with all of the latest drivers and software loaded). However when about to the scanner and then says the computer is not found (whatever the) despite them being on and ready. Scanning by any other method of the Mac works. Automator shortcuts work very well during the tests, but they do not seem to get initiated by the scanner for scanning form of initiation of the printer itself.

  Research on the support site HP and conclusion - a 'connection error' or "Computer no. detected" Error Message displays when trying to Scan from the printer control panel - as a subject gives PC solutions, but nothing for Mac. And so here I am. Help!

  JKB

  The next thing to check is that "HP Device Monitor" is running.  This background process is responsible for detecting the keys for scanning applications.  If you open the activity monitor (located in/Applications/Utilities) you should see this class as one of the running processes.

  It may be generally preferable for you to perform an uninstall and reinstall the HP software.  You will find in Applications/Hewlett-Packard HP Uninstaller.  Use this utility to remove the old software.  I recommend that you download and install the latest version of the software for your 7500 here: http://tinyurl.com/4voly2d.

  Hope this helps,

• HP 17-g121wm: goes black screen, but the computer still running (Linux)

  I use HP 17-g121wm laptop. The screen turns off at random 2-5 minutes after the start, sometimes earlier. The computer will still run, but the screen will be black (the backlight seems to stay lit, however). Any buttons I press on, nothing makes the screen back on, so I have to press the power button to turn off the laptop and back on.
  
  This problem does not occur when I start in Windows, but when I boot in Linux (I tried Ubuntu and Arch linux), the problem persists.

  I tried to boot with the kernel parameter 'nomodeset' grub, but when I do that I can't enter a graphical environment, because the amdgpu driver is based on Kernel Mode Set (KMS) without nomodeset.
  
  I prefer to use Linux on this laptop for programming and development, preferably of Arch Linux. So, any help would be greatly appreciated.

  jreynaud1

  I run Linux distributions on my desktop PC and from your description, the problem is almost certainly the lack of video drivers, especially in the case of the AMD video chipsets.

  I'm not familiar with the Ark, but I don't know with Ubuntu, which I had problems driver AMD for several versions now, and the last, Xenial 16.04, fglrx drivers simply will NOT work because they are not supported with the new version of the kernel and will not be - as AMD is working on a new driver open source to replace fglrx.

  HP forums provides no support for Linux issues, if my suggestion is to check with the forums Linux appropriate for each distribution.

  In addition, as you use a video chipset AMD, you might find the info you need on the Phoronix forums: AMD/ATI Linux - Phoronix Forums

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• status of the computer to run LabVIEW 8.6 remote façade

  Hello

  Is there any specific computer to run LabVIEW 8.6 remote panel?

  It's same as LabVIEW 8.6 run?

  Or I just need Internet access? how fast the Internet is to ensure the quality of the programming? Any fine version of web brouser? where could I find info relavent?

  Thank you!

  Cynitha

  The client computer would need the engine to run LabVIEW. The conditions for this are detailed in the LabVIEW 8.6 Release Notes. With regard to the 'speed' internet should be - that depends entirely on the amount of information that is sent. This KB article details some of the browser requirements.