Wake up HP Slate II with touchscreen?

Hello

I was wondering if the [topic] is possible? I am running 32-bit Win7.  I will put up the slate in a sort of self-made dock, in which the power/standby switch is inaccessible. I think that it may not be possible and asking just to be sure if the device could be reactivated using the touchscreen (or if there is a way to prevent the screen go to sleep, because devices such as keyboard and mouse can be used to wake up the device).

Sorry if this is not appropriate for this forum.

Hey, FU,.

Slate 2 wake to pronounce on the touch screen.  However, you can set the power options settings to prevent the display of power off or going into sleep/hibernation.

See the power management section in the User Guide:

http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c03112061/c03112061.PDF

Wes

Tags: Notebooks

Similar Questions

  • HP Touchsmart problem with touchscreen driver ect...

    Hello

    I have a big problem please help me.

    HP TouchSmart 520-1018fr desktop

    Model: H0N17EA

    I no longer Recovery Manager pour restore drivers and software under Windows 8.1 home 64 bit because I want to put the ' with touchscreen.

    HP TouchSmart 520-1018 en

    Manufacturer: Hewlett-Packard
    Maximum resolution: 1920 x 1080
    Screen size: 23.1 "(51 cm x 29 cm)
    Manufacturing date: 31/12/2001
    Aspect ratio: 16:9
    Type of video input: Signal digital DisplayPort

    I had Windows 7 home 64 bit on this PC before then I do a reset completely uninstall w 7 on this pc I wanted to have the computer naked complement that he nor more nothing on the hard drive.

    Pour Installer w 8.1 home 64-bit is now I have nothing

    not covered or the touch screen or HP update since I installed w.8.1 home 64 bit.

    I go into the device from the pc it does not find the driver to download.

    I have search the Internet to find the driver pour have new ' screen touch but cannot find the driver pour reinstall l ' touchscreen under aw 8.1.

    Thank you in advance pay help me.

    CDL

    PS: Besides the Pc reboots of it is under tension (EDF) unless I press the Start button of the computer...

    Hello
    I found the solution, that it is in the BIOS
    This good so good
    Thank you

  • Shared variables with touchscreen of TPC-2106

    I can't work with a TPC-2106 Touch Panel shared Variables.  I am hosting a Board 9642 sbRIO variables.  I built a test VI to run from the hard drive, and I can edit and read variables that VI.  When a generation a VI to run it on the touch screen works, but he can't read or write on all shared variables.  No error is shown during the execution of the VI.

    It seems that I is not need to take special steps to install support for this version of touch panel by: http://zone.ni.com/reference/en-XX/help/372507A-01/lvtpcgsm/tpc_install_sharvar/

    I tried the "Shared Variable.lvproj" sample project that is supposed to generate weather information and then transfer it to the touch screen.  The weather data are generated and displayed by VI on my PC.  The VI on the touch screen works, but never any weather data updated.

    I use LabVIEW 8.6 with touchscreen, FPGA and real-time modules installed.

    I have the touch screen connected via an Ethernet cable directly to my PC.  I assigned an IP address to the touch screen manually.

    Problem is solved using an Ethernet crossover cable instead of a standard cable.

  • BlackBerry Z10 Z10 mute appeal with touchscreen

    Hello!

    My Z10 is being muted for incoming calls with touchscreen. If the phone is in my pocket, she always stops ringing after a second.

    How can I disable this annoying feature?

    There is no setting to disable this feature, the best solution is to buy a case or rollover cases. "Case" adjustable to hang up and entire calls, also provides additional protection for the phone.

  • HP Slate 21 with 4.4.2 sounds bad

    Today, I'm updating my HP Slate KitKat 21 to 4.4.2. Everything seems to be correct audio exception: when I connect to my phones or the amplifier's audio jack, the sound is poor and no bass. Very bad sound. I tried tunning DTS without success.

    What should I do? 21 slate is my home entertaintment system!

    Is there a way to back to me previous version of Android? I have reset by default but 4.4.2 is still installed.

    Help, please

    Hello

    I did a little research today and I think that what is happening is that for users upgrade the Jelly Bean image directly to the new 17r20.1 - 011-11-WW the issue does not appear now that we have applied the fix.  But for those who went to the previous kitkat image everything first, and then to 17r20.1 - 011-11-WW, the fix for update of configuration for the DTS driver is proceed with installation, but for some reason any is not used by Android.

    So, if you continue to have the audio problem after obtaining of new generation, please perform a reset of the system (settings-> backup) and reset-> reset of data and this should solve your problem.  Please note that you must have before the last image (17r20.1 - 011-11-WW) to reset.

    Thanks to Carlone point pointing this problem out and we help check the fix has worked for him.

    I apologize for the inconvenience this has caused everyone, but I hope this will solve your remaining issues.

    Kind regards

    COWA

  • T410 fails to wake up from his sleep with the installed 2nd hard drive?

    Since I installed a second hard drive in my T410, a 250 GB Hitachi drive, my machine can't seem to wake from sleep (sometimes)... So, I have to do a hard reset.

    I had the same problem without the 2nd disc when I tried to use the HD password in BIOS and discovered that it was something to do with the disc Crucial M4 I use. But this same problem happening now since using the 2nd disc slot.

    Any ideas? I really like the extra storage space and won't remove based on this problem.

    Well it seems that the problem was caused by the version of the firmware for the SSD I installed it.

    The problem has been solved by updating the M4 Crucial SSD with the latest firmware...

    .. .and it solved the HD1 password issue too.

  • 21 HP slate, charge with usb

    I think to buy a slate of 21 hp and I want to know:
    You can load using the usb port? (I know this isn't a battery but I don't know a better word)

    Hello

    No, he must use the external adapter that comes with it.

    Kind regards

    COWA

    HP employee

  • S2240T monitor with touchscreen and 8.1 Windows

    I bought a monitor S2240T to use as a touch screen with an R2 of Alienware X 51 (Nvidia GeForce GTX 760 Ti 2 GB graphics card,), running Windows 8.1. It works, roughly. I can tap furiously several times before it will respond, and it often just not responding at all. I use a HDMI cable, everything is properly connected, and Device Manager shows the monitor as a tactile device compatible HDMI. It's just that this monitor is not really compatible Windows 8.1? This is not intended as a criticism of Dell or Microsoft, the monitor is actually a large screen, I just want to know if I bought the wrong type of monitor for Windows 8 touchscreen, 1, or it is supposed to work better than this?

    Quick update: I recalibrate the touch controls and adjusted the settings for a shorter, lighter touch. Now, it works much better on the half left of my screen only. The right hand of the screen is totally inadmissible to the touch. Is - this Windows 8.1 compatibility not or it's just a defective screen? It is very strange, because touch now works fine on half of the screen!

    Sounds defective.

    * Back to the top of this Forum to monitor
    Open the monitor "FAQ".
    * Open the "monitor warranty and replacement instructions.

  • KVM switch with touchscreens

    I have three computers on a KVM switch (two using Windows 7) and the other using Windows XP.  I would like to install Windows 8 on one of the computers and to install a touchscreen, but do not know how it works via the KVM switch.  I understand that Windows 7 can use the touch screen, but it can pass the switch connections KVM mouse?  How Windows XP, which is my file server run even if she cannot use the touch screen features?  I guess I have to use the classic mouse.  I just let the mouse on Windows 7 and Windows XP only systems connections and use the touch screen for the Windows 8 only?  Not much on this subject.

    Windows 7 and Windows 8 have support integrated touch screen features so that you do not need to load special touch screen for these two systems driver.

    The issue will be on the touch screen, you will use the 'pilot' for the XP system or not.  You should check with the manufacturer of touch screen and ensure that they have the driver for the XP system.
    In addition, if your KVM switch is based on technology "emulation keyboard and mouse", then you can change your class KVM "DDM (dynamic device mapping)" switch the KVM switch that ensure that your monitor touchscreen works smoothly with all the different BONES connected to the KVM switch and with no latency in the passage.
  • Need password on wake up does not work with two monitors

    I use a laptop with a second monitor attached. I have the settings set to sleep when I close the lid, and then request a password on the reactivation. He does not sleep, and if the second monitor, but when I open again the cover, it does not require a password. It works fine when I don't use the other monitor, so I don't know what the problem is. Any ideas?

    Hello

    1. it worked before?

    2. how to connect the second monitor? What is an extended display?

    3. what happens when you wake the computer from sleep mode? Are you able to look at the screen in the second monitor and the laptop successfully?

    4. What is the brand and model of the computer?

    Method 1:

    I suggest to turn off the prompt for password then that sleep and you can reconfigure the second track again and check.

    Method 2:

    If the problem persists, update the card graphics card and see if it helps.

    See the links below for more details on the update of drivers:

    Updated a hardware driver that is not working properly

    Update drivers: recommended links
     
    Hope this information helps.
  • PROBLEM WITH TOUCHSCREEN KEYBOARD AND WRITING - LENOVO SU230 TWIST

    Hello, please request your support that I do not appear on the numbers and the symbols of the touch keyboard, only to show the letters LISTED SQUARE SMALL INSTEAD OF THESE characters, but characters that should, if someone could give me the model to overcome this drawback does not allow me to use my laptop when I use it as a Tablet

    Lenovo Thinkpad model SU230 Twist

    Hi Ricardo,

    It seems to be a problem with do not have updated or updates relevant driver/firmware. I would like to know some information about this problem so that we can help you further.

    1. have you made changes on the computer before this problem?

    2. do you get any error code or error message while starting?

    I would suggest trying the following methods and check if it works for you.

    Method 1:

    Run the hardware and devices Troubleshooter and check if that helps.

    Follow the steps to run the Troubleshooter:

    a. press Windows + W on your keyboard to move to the search option.

    b. type Troubleshooting , click Troubleshooting.

    c. now, type Hardware Troubleshooter in the option Search .

    d. click on Troubleshooting of hardware and devices and follow the prompt to run the troubleshooter.

    Method 2:

    Download the update of firmware of the touchscreen controller on the Lenovo site and check if the problem persists.

    Atmel touch tool updates firmware of controller for Windows 8 (32-bit, 64-bit) - ThinkPad Twist S230u:

    http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS035873

    Please reply with the status of the issue so that we can better help you.

  • Twist cannot pull up bar charms with touchscreen

    Thus, for some reason any charms bar is no longer comes with the touch screen. It will come out with the mouse and the touch screen seems to work fine otherwise. I calibrated the screen, and I always feel the question. Anyone have any suggestions, or is it time to call Lenovo and having the screen / digitizer replaced?

    Thank you! I'm not in this thread because I have the same question on a cold start. My touch screen works fine other than the issue of bar of charms.

    So I searched in the thread and noticed that technot fixed his charms bar problem by resetting the calibration data. I did the same thing, and it works perfectly now!

  • HP Envy 4520: How do printer print in black ink with touchscreen?

    I am printing newspapers in my semi truck in color but you want to print in black ink. How can I change the parameter in black ink with touch screen, printer or Android?

    Hi @ milky2112.

    Welcome to the Forums of HP's Support. I understand that you want to print in black ink only. I would like to help.

    This can be done via the screen touch printers. It is simply not an option. You have two good options.

    (a) remove the color cartridge and print mode single cartridge.

    (b) when printing from your Android, use the HP ePrint app.

    The User Guide explains more on the mode of single cartridge.

    If you are unfamiliar with the HP ePrint app, this link will help you. Printers HP - using the HP ePrint App

    If you have any questions, or if this does not resolve the problem, let me know.
    If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

  • Looking to buy a new system with touchscreen ability. Should I wait for Windows 8 release?

    Buy now or wait?

    My family is looking at buying one of these screen touchscreen all-in-one PC and I am personally looking in a new laptop maybe a hybrid. Should perhaps buy us a now or wait until Windows 8 is released? Any advice?

    Please visit: buy a Windows 7 PC and get Windows 8 Pro for $14.99.

  • Acer Aspire S7-391 Windows 8.1 Issus with touchscreen and Trackpad

    Hello. I've just upgraded to 8.1 Windows, everything went well, but I realize now the touch screen is much less reactive than before, and many times I have to touch twice to make the action, something that never happened to me before with Windows 8.

    ¿Any suggestions?

    Another thing is the trackpad, which for example now does not scroll with 2 fingers and other things that did before.

    Thank you

    PROBLEM SOLVED WITH THE TOUCH SCREEN!

    Go to the Device Manager and look at the Human Interface Devices. There will be some USB devices that end up being the touch screen. If you change the options of feed on those so they don't turn off to save power, the problem should be solved.

    Please let me know how it works for you.

    I have an Acer S7 391.

Maybe you are looking for

  • Satellite L350 - access code for the router

    Dear Sirs I have a Toshiba Satellite L350 under Windows 7 Ultimate. For the first 5 months, he remembered the wireless to the router access code. I then installed a BT Home Hub which I subsequently removed and then the Windows 7 machine will remember

  • LaunchExecutableEx returns error - 43

    I use LaunchExecutableEx in a GUI application to launch telnet.exe. Since the beginning of this application running on Windows 7, we started having a few problems. The LaunchExecutableEx returns error User Interface-43 (the text shows that "the attem

  • Update Windows 10 lost after renewal of HARD drive

    Hi all. I have this laptop V7 482 PG, who has been properly updated for Windows 8.1 W 10 and worked ok until the HARD drive crashed last week. Warranty Acer has worked flawlessly and they quickly returned my laptop with the new HARD drive. So far so

  • Error of content protected after a few seconds of Live TV

    Original title: error display driver When in Media Center to watch live TV I get about 2 seconds of TV and then the picture freezes. If I try and do something else, I get this error message "driver display error video reading legacy does not support

  • Why can't save more files in the folder on my desktop? Could it be a virus?

    I have a windows 7. And I think that my computer get a virus. But whenever I have to scan my computer a virus, he said that it is clean.