wallpaper comes back 10 minutes after changing

Hello, I followed the steps to change my wallpaper, and after about 10 minutes, he returned to what I wanted changed. I applied the instructions for implementing in the background several times. Some time ago I changed and did not have a problem


-You are using a laptop or a desktop computer?

Follow these steps and check if the problem persists.

Step 1:

Test the issue in clean boot.

Note: Follow step 7 to your computer as usual.

Step 2:

Make SFC scan and check if that helps.

Step 3:

You could test the issue in a new user account.

Tags: Windows

Similar Questions

  • Date will come back to 2013 after upgrade to 10.11.5

    I have a 3.1 MacPro 2 x 2, 8 GHz with 500 GB of SSD and 32 GB of ram and 3 x 1 TB HD.

    I upgraded from Yosemite to El Capitan 10.11.5. I did a new install with a clone (using the CCC). No problem so far except the date that always goes back to December 5, 2013 (manual correction or auto sync on Apple Europe...), maybe 10 times a day. It's quite a mess with all applications using date!
    I did a SCM and reset VRAM (after having disabled pad [disable sudo trimforce]), but I still have the problem.

    I am now running El Capitan 10.11.6 but with the same bug.

    Can someone help me? I don't know what to do and I don't want to go back to Yosemite. Thank you!

    Check system preferences > Date & time.

    • On the Date & time tab, is "set date and time automatically" checked?  It should be.
    • On the time zone tab, the time zone is set correctly?
  • Menu "BOLD" of blackBerry Smartphones changes back to default after changing the battery, but changes back when original battery in

    I wanted some advice about batteries for my Blackberry "BOLD". I bought what was believed be an OEM battery so I had a back up when the original battery ran low on the ground outside, etc. But when I turned off the phone and remove the original OEM battery and place my purchase new battery in the phone, the menu has changed the appearance of the default menu and with no icons email I normally 5. The phone works fine, but the email icons disappeared now. If I replace the 2nd battery with the original OEM battery, he then returned to my menu customized with all the messaging icons in the menu.  Can someone please help with this problem. Is this happening because the 2nd battery purchased well stated as an OEM does not have the secure chip and alleged encryption that is used by the "BOLD" BB Phone to ensure that you are using an authentic product OEM Blackberry? Should I just buy the battery via Blackberry at full price or can I get the other distributors who claim to sell the correct OEM battery with the chip but at 1/2 to 2/3 of the price.  Or all the compatible batteries should operate independently without changing my settings and I may encounter an error with my phone, or is there an option that can be turned off in the phone to stop the resets.

    Thank you


    I can't guarantee that the use of the OEM battery will fix the problem.

    I have no experience with Mugen batteries, so I can't help with that.

    I don't think that a battery of expensive means better. Specifications only.

    I buy my OEM batteries with the carrier that sold me the unit.

    It might cost a little more, but peace of mind and no warranty problem

    are worth it.

    I think there is a very good reason that RIM makes batteries,.

    and I am not prepared to find out why!



  • property of p2pdatamessaging node comes back to disabled after allowing


    In my room console, inside a room:

    1. I activate p2pdatamessaging for a collectionNode
    2. I get the warning that there may be problems if flash player is not 10.3
    3. I click on continue
    4. I click somewhere else, for example following collectionNode
    5. After clicking on the p2pdatamessaging return is disabled later.

    Advice please?

    Hi Mickey,

    Just a heads-up: you're right, someone broke this little poor box = (.) We checked in a fix which will shut down in the next version, time in weeks (not in a few months!).


  • Vista update fails, takes 30 minutes to come back!

    It's been a week now, whenever I turn on the PC or reboot, Vista will update... 15 minutes later, I get the message (updates are not configured correctly, returning any changes... Do not turn off your computer) and then I have to wait another 15 minutes to get him back! Now, all I have in the start menu is: note pad, calculator and backup and Restore Center! It becomes very annoying. Please advice. It's windows Vista Home Basic, SP2, 32-bit.

    Hi HeshamEtaby,

    Thanks for posting your query in the Microsoft Community Forums!

    Of after the description of problem that I understand that you can not install windows update on the windows vista computer, and it's back to the desktop.

    -What do you mean "I have in the start menu of note pad, calculator and backup and Restore Center"?

    This give a try.

    Method 1

    Run the fix of the article.
    The problem with Microsoft Windows Update is not working

    Method 2
    Try to install the update in a clean boot state.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 3 in the Knowledge Base article.

    Method 3
    The problem can also be caused by your security such as anti-virus program that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable the anti-virus and check the result again. You must activate new security that you was disabled programs.
    Disable the antivirus software:

    Once we install the updates, please turn on the firewall.

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 4

    Refer to the help article and check if that helps.

    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates


    Note: It is recommended to back up the data before you start the installation. Installation takes the same amount of time to make the upgrade to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

    For your reference:

    Problems with installing updates


    It will be useful.

    Let us know if you encounter problems under windows in the future. We will be happy to help you.

  • OSX become insensitive and then back to reagent after a few minutes

    I know that there are other discussions about this, but I still write most of the son seems to point to Safari as the culprit, even though I think it's more like a problem with the drivers.

    I have 21.5 "iMac OSX El Capitan 10.11.5 running end of 2012.

    I noticed randomly becomes unresponsive by slowing down quickly until all blocked programs, but the mouse cursor moves again, and the screen saver strikes after some time and I can get by moving the mouse or pressing a key on the keyboard.

    If I wait minutes (10-15 minutes usually) it becomes sensitive.

    I tried to watch the console log, but it seems that everything hangs and then everything comes back to life and nothing is written to the log in the meantime.

    My suspect is that it is either a graphic card or bluetooth issue, but certainly something wrong with some drivers because the same version of Mac OS x on a different material does not suffer from this problem.

    It becomes more obvious when you have Chrome with many tabs open and parallel with a virtual machine running at the same time.

    I tried to nail him with different tools, but because everything becomes insensitive, even diagnostic tools running on that same box are of no use because they just stop and recover as all other processes without even noticing the time gap between the two.

    Is there anyone who has an idea how to debug this problem, either with the external hardware or any other means?

    See you soon!

    Since you're talking about Chrome and parallel: the amount of RAM that iMac has? And how much space to spare?

  • Some pages don't load on Firefox. They charge after changing the proxy settings back.

    I have a very annoying problem with Firefox. Some pages not loading, randomly. Other browsers work fine. I tried to disable all add-ons, I reset firefox, I tried safe mode. Nothing works. When a page does not load, I go to advanced/network/configuration and change the setting between 'no proxy', 'use system settings' and 'auto-detect' proxy. I try to reload each time, sometimes try to go to another page and then come back. Finally the page I want loads. Sometimes it loads when I just of the cycle on the same setting, as it was before! It makes no sense to me. I'm on MAC OSX 10.8.5 and have no proxy at the system level settings (all boxes are unchecked).

    Any help would be appreciated! I don't want to change chrome, but I'll be forced to if I can't solve this problem! (annoyingly, the page did not load when I tried that submits the first time...)

    Try disabling IPv6 (also check other possible causes).

  • Firefox keeps "Unresponsive" at random, and then comes back after 10 to 15 seconds.

    Firefox keeps "Unresponsive" at random, and then comes back after 10 to 15 seconds.

    I saw this problem sent by others.

    I had this problem for several weeks already and were very frustrated by the latter. I disabled all my Add ons clear all caches etc.

    I've finally updated Java of V6.x to V7 and it seems to fix the problem. (I noticed that FF disabled Java due to the incompatabilities).
    I'll be watching it but it seems much more quickly.

    Hey wombat,

    If the upgrade of Java solves your problem, it would be great if you can mark this as resolved subject, so that other people with the same problem can benefit from advice that you gave.

    Thank you!

  • Hello I (IPAD MINI DEVICE) and problem in my memory I have 12.5 GB, and using less of it and A Nofticate it indicates your size will end soon, or something like that I deleted the apps and that he got 100 MB and after all the Nofticate come back and some

    Hello I Have (IPAD MINI DEVICE) and have problem In My Memory I have 12.5 GB, and using less of it and A Nofticate it indicates your size will end soon, or something like that I deleted the apps and got 100 MB and after all in the Nofticate come back and something has my size and it says Iam using fully 12.5 GB and I amnt Iam using just use it 4 or 5 GB

    Try to provide the exact text of the message you see. "size will end or something" identifies not enough information for anyone to be able to solve the problems.

    In addition, check if reference is made to the size on the device, called space iCloud.

  • How to return to changes saved when the menu of 'come back' does not include the version of the document I'm looking for?

    Hello, I use Pages. I worked on a document for several days, save the changes on the way. I have closed or saved the document and asked a question about saving the changes. I pressed on continue, thinking that I was saving my document. It seems that the computer has erased all changes I made since I finally opened the document. The document says he was created today, and none of the versions of my last week of work are available. I want to restore a version with all my important revisions. The menu 'Browse all' and 'Come back' do not have one of my newer versions. Is it possible to find?

    It is important that you have all the hours of backups Time Machine on an external drive. If open the recent item and return to the menus avail you nothing...

    Open a Finder window. In the search window, type the following line, replacing the date with the one that is relevant to the review date that seek you. The following explains show me all the documents pages that have been modified since the specified date. The same syntax works in the Spotlight window.

    modified: 15/12/15, genre: pages

    Also check iCloud drive.

    If it does not find the file you are looking for and you don't have a Time Machine backup, you've learned an important lesson or two.

  • How can I change the time in the restore point I come a few minutes before I deleted my manuscript


    I deleted and saved on a manuscript, how can I change the... TIME... in the restore point I come a few minutes before I deleted my manuscript..., the DATE is accurate, however the time is off in ten minutes.  It is important that I have recover my document...

    If you're talking about a system restore, this will do not in any case because it does not affect data files, only the system files.

  • A problem of time unusual Windows: time of Windows always comes back to the year 2005


    Microsoft Windows XP Professional
    Version 2002
    Service Pack 3

    AMD Athlon XP 2700 +.

    At the start, and sometimes even if the computer is running, the windows of time always comes back to the year 2005, while maintaining the right hour, minute, second, day and month.

    I tried a number of solutions such as the "authoritative time server configuration", analysis of the computer for viruses and restarting the service of time via the command prompt, but without success. I am able to synchronize the time with a server, but only after the change of the year 2011.

    My installation of Windows is updated regularly and I'm always connected to the internet. I'm pretty sure that this is not a BIOS problem I replaced the CMOS battery and have ensured that the BIOS time is correct.

    In addition to the usual questions that arise in some programs due to an incorrect time, I noticed that when you use Firefox 4, the Google search engine always resets to "Instant Search" despite my having the clocks to the correct year.

    Any ideas?

    If I read your messages, I have that, amongst other times, pick up this always happens at startup.  This is the case, you can first check that the time is set correctly in the BIOS before you boot into Windows.  If it is, and, as you think, a program is causing this problem so the task is to know which.  A lot of startup programs each time you start Windows.  The boot configuration with minimum nude of running processes is called "Safe Mode".  So start your computer Safe Mode (press F8 as your computer starts).  When he arrives, check the date and time.  If it of OK and has not changed, then one of the other optional components must be the cause.  To narrow down that one, you can use "msconfig" to toggle the startup items groups until you find the one that is causing your problem.  The procedure for doing this is described in this article:

    "How to solve configuration errors by using the System Configuration utility in Windows XP"
      <>http://support.Microsoft.com/kb/310560 >

    I start by disabling everything in the "Startup" tab  If this solves the problem, then I start allowing things in this tab a little at a time until I have find the culprit. If the Startup tab does not resolve the problem, then I try disabling items in the tab "Services".  I usually start with non-Microsoft services.

    Of course on the machine who recently had this problem, you could try a shotgun approach and do a simple "System Restore" to a point in time before this problem.  It will probably fix the problem, but you will not know what caused it.

    "How to restore Windows XP to a previous state"
      <>http://support.Microsoft.com/kb/306084 >


  • Wireless networks disappear minutes after startup

    I start my desktop PC (Windows 7) and everything works fine. I am connected to my wireless router and have access to the internet.

    Then a problem occurs, sometimes only 2 or 3 minutes later, sometimes around 5 or 6 minutes later.
    The computer loses internet access, but remains connected to the network. After a few seconds, the internet is back.
    After a few times, the computer finally loses the connection to the network, and then the network (as well as other networks that were in the range) is no longer there.
    I am currently link this on my laptop which is right next to my office. My laptop is connected to the router wireless (and internet) without any problem.
    I've been struggling with this for a while now and there are only a few hours, I deleted Norton anti-virus with the Norton Removal Tool. No change.
    Map of TP-Link in the problematic PC wireless network is only about 2 years old. I think my next step is to buy a new card netword, thoughts?
    EDIT - I forgot to mention. I uninstalled and reinstalled the NIC several times. No driver updates available.
    I just thought an idea. Before buying a new card, I'll see if I can install this on my brother's PC. So I'll see what happens.

    Hi Mike,.

    You are facing problems with an internet connection in Windows 7.

    Were there any changes made to the computer before the show?

    Please follow the steps from the link and check that it works very well.

    Wireless and wired network problems


    For all windows questions do not hesitate to contact us and we will be happy to help you.

  • My laptop keeps freezing a few minutes after opening.

    Data sheet:

    Acer Aspire EA40_HC model E1

    with Intel Core i3-2348 M @ 2.30 GHz CPU processor

    and Intel HD 3000 Graphics

    Windows 8 Pro

    RAM: 4.00 (2.58 GB usable)

    System type: 32-bit operating system, x 64 based processor


    One day, I was playing CS, everything's fine, it works well, I know that my pc is not the best for playing games, I'm running with fps constant of 40-60 which is not obtained, but not bad either. I removed my battery of laptop, but kept plugged in because I know that if you kept it loads during use, it can decrease the life of the battery power. A few hours later in the game, my laptop just turned off. I don't know why, maybe the charger has been moved and unplugged then I checked. He was actually plugged in nice and safe, and I don't think it was the cause of the laptop to turn off or maybe it was. Then I turned on my laptop. Every thing seems fine but the 'Welcome' screen any longer that it was. A minutes and continues the 'welcome' to display. I know something was wrong because who usually took only a few seconds to load. I turned off my pc and opened it again. Nothing had changed, it is still stuck on the Welcome screen. So I waited a little longer, now 3 minutes, I saw the circle of loading thingy is frozen and non-mobile.

    I'm a little worried that I just broke my laptop, I tried a few corrections in the internet, but I can't find. I went advanced startup settings and did a system restore and choose the settings of only a few days.
    The system recovery succeeded. I restarted my PC, I was so happy that I fixed it, for so I thought it was. I open Google chrome, but as soon as I pressed the Enter key everything froze. Same office does not. I restarted my pc again. The start-up took a little longer. After going on the office a few minutes later the pc simply froze again. I can't do anything. I've been waiting so he could meet again for 10 minutes and still frozen. I restarted my pc and was able to put it in SafeMode before it froze again. And everything works fine in safe mode. I can still surf the internet but can't actually play cs: go in what is sad. I can still play undertale but which is nice. When I put back it in normal mode, it keeps freezing after a few minutes.

    If someone out there who can help me understand what causes this and how to solve my problem I would appreciate it a lot! :)

    Too long and did not read?: my PC turns off suddenly, when I boot it its stuck at welcome screen upward.

    Did a system restore and solved the problem but now it keeps freezing and not responding do not.

    Set it in safe mode and everything is fine but only limited.

    Read for more details.


    Games can be hardware intensive (graphics, etc.) and your problem seems to come from a special combination of games and an accumulation of dust in your laptop causing it to cut.

    It may be an overheating problem and it is normally the main reason for your problem.


    If it's a hardware problem, it would not not to restart.

    That said, it is possible to have a hairline cracks in the motherboard, etc, which becomes obvious as soon as it warms up

    Check vents for hair, dust, etc. and do not use a laptop when it is based on material surfaces: bedspreads, blankets, etc.

    If the problem persists, because it of a laptop, bring it to a local computer and reliable repair shop and get them to open and clean the dust inside...

    Here is an interesting discussion about the reasons for your problem:


    NB: > however 9 out of 10 cases of overheating are caused by obstruction of the air flow.


    Safe operating temperatures of criticism:

    "What should be the temperature of my processor in the computer?



    It is difficult to know what is the cause of the gel.

    It may be a number of things.

    But to rule out a software problem as follows.

    Search for malicious software with the FREE version of this program.

    And does not accept the option "Pay for the version" trial installation

    Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:



    You can clean your hard drive using these two methods.

    "Delete files using Disk Cleanup"


    Using the free CCleaner program:


    In NO case use the registry cleaning Option in CCleaner


    Make sure you have the latest updated drivers:

    Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.


    "How to optimize the performance of Windows 8 and 8.1" . "



    Worth the read as:

    "How to optimize Windows 8.1 for a desktop PC.



    " " Performance & maintenance"



    And I would check to see if it has damaged system files.

    Each method/step below progresses to another if the first does not all corrupted files which are, etc..

    «Use the System File Checker tool to repair missing or corrupted system files»



    And these eightforums.com tutorials are very detailed for the problems resulting from Scan SFC:

    "How to run the command" SFC/scannow"at the start or in Windows 8 and 8.1" . "


    Read it in conjunction with the rest of the information they give link above.


    If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

    If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

    If still no, then try using ONE OPTION above to run the command sfc/scannow at the start

    If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

    If not yet, then you can use the steps in the TIP box in the section THREE OPTION to manually replace the files SFC could not fix.


    "How to update windows 8 and 8.1" . "


    Refresh your PC goes like this:

    • The PC starts in Windows RE (Recovery Eenvironment).
    • Windows RE scans the hard drive for your data, settings, and applications and puts them aside (on the same drive).
    • Windows RE installs a new copy of Windows.
    • Windows RE restores the data, settings, and applications, which it set aside in the newly installed copy of Windows.
    • The PC reboots into the newly installed copy of Windows.


    "How to reset Windows 8 and Windows 8.1" . "


    "When you reboot your PC, the drive will be completely reset and all your applications and your files will be removed it." Windows 8 will be reinstalled, and you need to change any settings, and then reinstall all the apps you want to come back after the reset. If you know if all the files you don't want to lose, then you must back up these files before you start resetting.

    See you soon.

  • my laptop don't fully Hibernate. He seems to come back to life and then eventually overheating in t


    My vaio P ultrabook does not entirely seem to Hibernate.  He comes back to life and then overheating in the case.  What should do?

    Thank you


    htrim wrote:


    My vaio P ultrabook does not entirely seem to Hibernate.  He comes back to life and then overheating in the case.  What should do?

    Thank you


    Don't know how to set hourly Hibernate in your power option.  Default (hibernation to 1440 minutes or 24 hours), your Vaio is in mode "Eve" than after 24 hours before changing mode Hinernate.

    During standby mode, your technology Intel Smart Connect, if activated (default is on) are going to wake up periodically to check the email and messages as your smartphone or tablet so that they are already on your machine when you exit sleep next time. Especially when there are large files to download, the kick-off of the fan, can consume the battery, and so your machine can become hot.

    You can disable it in Vaio Control Center > battery & > Intel Smart Connect technology.

Maybe you are looking for