WAN miniport (ATW) #2 code 10

Similar Questions

• WAN miniport (ATW) #2 has a driver problem. Driver should be replaced.

  I get the message: miniport Wan WAN (ATW) #2 has a driver problem.  Driver should be replaced.  This device cannot start (code 10)

  Hello

  1. which version of the windows operating system is installed in the computer?

  2 did you change on your computer?

  Method 1:

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Method 2:

  If your operating system is windows 7, I suggest you run the fix it tool and check.

  Hardware devices do not work or are not detected in Windows FIX IT:

  http://support.Microsoft.com/mats/hardware_device_problems

  Method 3:

  I suggest update you also the drivers and check.

  Update of the hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  What to do when a device is not installed correctly:

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

• Satellite A660-047 - lack of WAN Miniport drivers

  I have a Toshiba Satellite A660-047 PSAW3C-047017 running Windows 7 Professional 64 - bit.

  I just downloaded Norton Ghost 15 ISO, created the installation CD, installed Ghost and ran the validation pilot of the installation CD. I received the following message:

  > Following devices have no drivers in the Symantec Recovery Disk.
  >
  > WAN Miniport (IKEv2)
  >
  > Detailed information on these devices are given below
  >
  > Description: WAN Miniport (IKEv2)
  > Class: Net
  > Class Guid: {4d36e972-e325-11ce-bfc1-08002be10318}
  > Material Id: ms_agilevpnminiport
  > Material Id: MS_AgileVpnMiniport

  It seems a little research on Google, it's more than a level higher than a real hardware device interface. I don't really know what it's for, or what is the probability I will miss it in the case of a recovery. Should I spend time worry right now?

  The thread said http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/wan-miniport-sstp-driver-problem/f83493ae-8127-47dd-a7b7-7e5b3460b6a6 should not 'more often' but I was wondering if exceptions could be encountered during recovery (when I want to use WiFi to browse and restore my system to the State non - factory, as well as to make diagnoses on a HARD drive may be bad).

  Hello

  AFAIK Miniport WAN is a part of the Ethernet controller and you will need to install the LAN / Wlan driver.
  You should go to control panel-> network-> Lan-> properties control.
  Here, you should check if all protocols are installed.

  But as you have already said: it of not really a necessary point

• Removal of WAN Miniport (updated)

  Windows XP, Service Pack 2

  I have these wan miniports that I can't remove.

  Miniport Wan (Network Monitor) disabled
  Miniport Wan (Network Monitor) - Packet Scheduler Miniport disabled
  Miniport Wan (Network Monitor) - Miniport of Packet Scheduler (!)
  Miniport Wan (Network Monitor) - Trend Micro Passthru Ndis Miniport (!)
  Miniport (Network Monitor) Wan #2 - Trend Micro Passthru Ndis Miniport (!)

  I ran all anti-virus programs that I can think of and I found a few things, but nothing of assets. When I try to delete these I get something like, failed to uninstall this device. This device can be used to start this computer. I found a few "TM_PassthruMP" registry keys that look very delete-able! I seriously doubt that these miniports are used for nothing, so I should be able to remove them. I'll try to upgrade to sp3, as soon as I get the right job. I was afraid to upgrade to sp3 because doing so trashed my other computer. Being a closed person in I need this computer to stay healthy of mind, so I'm very careful with him.

  Any ideas?

  I finally found the answer to this mess. Miniports are locked by a service (Qos packet Scheduler) located in the area of local connections. Simply uninstall that this service and miniports will come out. Most of miniports went their own, some must be uninstalled. I ran my computer for a long time with Qos packet Scheduler uninstalled and everything seems to work ok! If you want to re - install the Qos packet scheduler you can and miniports do not return for some time. Over a long period of time miniports seem to go back and "stuck" again. Simply repeat this procedure to remove them.

  There is also a protocol called (Network Monitor driver) in local networks which will hang minports you only need this driver you gather, analyze packets using the command "NetCap.exe. You do not really have this installed protocol unless you use the Netcap.exe command and if you use the command it automatically installs the Network Monitor driver.

  Now all looking for good new!

• I have a WAN Miniport PPPOE problem. Can't connect to the internet.

  I have a WAN Miniport PPPOE problem. Can't connect to the internet.

  Hello

  If you have a Modem and a wireless router or a Modem/Router combination. Read its manual and configure the WAN for PPPOE port.

  http://www.ezlan.NET/PPPoE.html

• Wide area network WAN Miniport driver

  Hello

  I'm looking for a specific Driver for Windows 7 64-bit:

  Name [00000001] WAN Miniport (IKEv2)
  Adaptertyp not available
  Produkttyp WAN Miniport (IKEv2)
  Installed Ja
  PNP-Geratekennung ROOT\MS_AGILEVPNMINIPORT\0000
  Letzte Zurucksetzung 21.04.2010 16:28
  Index 1
  Dienstname RasAgileVpn
  IP-address non available
  IP-Subnetz non available
  Standard-IP-Gateway non available
  DHCP aktiviert Nein
  Server DHCP Nicht available
  DHCP-lease-cases non available
  DHCP-Lease-Start non available
  MAC address non available
  Driver on c:\windows\system32\drivers\agilevpn.sys (6.1.7600.16385, 59,00 KB (60,416 bytes), 14.07.2009 02:10)
  

  I finally found a resolution for this problem:

  As I discovered that the recovery environment is based on WPE 2.1, I simply took the 32-bit driver for Windows Vista, it incorporated in the recovery CD and everything went well :)

• With WAN Miniport problem when you configure the VPN in Windows 7 server

  I tried to make my computer a VPN server by establishing a "new incoming connection" under connections in the network and sharing Center. Originally, she she started but showed no WAN Miniport connections. I could not connect to this VPN with my other computer.

  What I've done so far:

  • I have 'upgrade' all WAN Miniports in 'MAC Bridge miniport driver' Device Manager (since I couldn't uninstall them as they were) and then uninstall all WAN miniports. I restarted my computer and then I tried the device drivers to install automatically, but only a few installed successfully.
  • Then, I downloaded the latest WDK (8.1) and tried to reinstall all Miniports WAN via devcon.exe with the command "devcon.exe install c:\windows\inf\netrasa.inf MS_PptpMiniport. He says that the node has been created, but it could not install the drivers. I restarted my computer, but some of these minis ports appeared as 'Unknown' in Device Manager, while others appeared with their names but with numbers attached because I tried a few times, Ex: "Miniport network EXTENDED (IP) #3".»

  from my understanding, I need at least WAN Miniport pptp to work for VPN to work. I don't know what to do at this point. Any help is greatly appreciated. Thanks in advance.

  Gateway DX4822-01 desktop PC

  Windows 7 64-bit, SP1

  Hello Jdrumr,

  Welcome to the Microsoft Community Forum.

  The question you posted would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:

  Microsoft TechNet

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• Card network (WAN Miniport; IP, IPv6, L2TP, monitor network, PPPOE, PPTP, SSTP), Windows 7, x 64

  All of the network adapter type titled, Wan Miniport, as indicated in the title of this message field, pilots could not updated when tried via online. Read the same error message, "File not found" in the copy of Windows 7, x 64 on my laptop recently purchased. Initially, I went to the dealer. The dealer could only advise me to go on the manufacturer of these adapters (Microsoft) and ask my question here. Please inform me of this situation. I want to go wireless but my router cannot be installed. Maybe the reason why has been said here? Thank you. DKY

  You must install the correct WLAN drivers for the wireless adapter.  You should find the driver for the adapter wireless directly on the web site of the manufacturer of the computer laptop tech support.  Once you install / reinstall the drivers, other pilots then install themselves.

• Unable to connect to the VPN. I found that this could be because of the mistake of sstp WAN Miniport. Windows has the drivers for it?

  Recently, I upgraded my windows vista business to windows 7 Professional and can not connect to the VPN. When I did a search on the internet I found that this could be because of the mistake of sstp WAN Miniport. Windows has the drivers for it?

  Vijay
   
  Original title: miniport network driver extended WAN sstp

  Hi Vijay,

  You can view this issue in the Forums of TechNet Windows 7 IT Pro: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  Thank you.

• WAN Miniport problem?

  Hello everyone do not know what is happening, but what is the problem. Miniport Wan (Network Monitor) has a driver problem. WAN Miniport (IP (has a driver problem.) Miniport WAN (IPv6) has a driver problem. It says to reinstall the device drivers. How do I do that?

  Hello Zach,

  I suggest you follow the steps mentioned in the link.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/repair-WAN-Miniport-Network-Monitor-2/8a3ee419-dd65-4b78-af1d-394ed464622b

  Hope that the information provided in the link will help you get rid of the error and install the drivers correctly. If you have any questions, please let us know.

• Code 10 for WAN Miniport

  So I code 10, in what follows:

  Miniport Wan (IP)

  Miniport Wan WAN (IPv6)

  Miniport Wan (Network Monitor)

  I tried to update, such as recommended by my Tuneup utilities, but he told me that they are up-to-date. I think it's one of the reasons why my programs keep with the status "not responding". Can you help me? Thank you.

  Hi Dalepinili1027,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your Hp laptop and the error code of 10 wireless network card. I recommend you to uninstall what you have in your network cards. You can remove the driver by clicking on your typing key of Windows Device Manager locate the drivers and click right properties of the network adapter. uninstall the driver. Reboot the laptop and it must be reinstalled the device. I'd be happy to help you if necessary. How can I find my model number or product number?
  Please respond with an operating system that you are running:
  Operating system Windows am I running?
  
  Please let me know.
  
  Thank you.

• WAN Miniport device receives error Code 31 in XP

  Problem came to light, when the system would no longer connect to the internet.

  I found that the Miniport network EXTENDED (IPX) device was yellowed out.  I tried to update the drivers using the Windows XP disk.

  You can not remove the device because it indicates that it may be necessary to reboot the system.

  * original title - MiniPort (IPX) Wan gets this error in Device Manager. The device does not work properly because Windows cannot load the drivers required for the device (CODE 31) _ *.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest XP drivers for it > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.
  
  See you soon

  Mick Murphy - Microsoft partner

• Code 31 error WAN Miniport

  I have an error message "this device does not work properly because Windows cannot load the drivers required for this device.

  Respect to Miniport network EXTENDED (IP), (IPv6), (L2TP), (Network Monitor), (PPPOE), (PPTP).

  I tried a few quick fixes from Microsoft but can't seem to make them work.  Were to find the drivers on dell, but cannot move to something useful.

  I am running Windows 7.  most of the advice I find refers to windows 8.  I have a Dell Laptop Inspiron N5030 - the Dell site is so complicated, I can't find anything to help me and the Service Tab program does not work.

  Help is greatly appreciated.  Thank you

  Hello

  Try the following steps:

  1. Open the Device Manager.
  2. Right click on the device miniport Wan (Network Monitor), and then click Update driver software.
  3. Click Browse my computer for driver software.
  4. Click Let me pick from a list of drivers for devices on my computer.
  5. Clear the Show compatible hardware check box.
  6. In the column on the left side, select Microsoft, and in the right column, select the KM TEST Microsoft Loopback adapter.
  7. In the Update driver warning dialog box, click Yes to continue installing this driver.
  8. When the driver is installed, right click on the device and then click Uninstall.
  9. Once the device is uninstalled, right click on the name of the computer in Device Manager and then click on Search the hardware changes.
  10. On the view menu, click Show hidden devices.

  I hope that helps!

• WAN Miniport (SSTP) driver problem

  Troubleshooting tool Windows 7 64-bit notes following problem:

  "Miniport (SSTP) WAN has a driver problem"
  and cannot be set. Microsoft then directs me to:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=Marvell%20Miniport%20Driver&v=Marvell%20&UID=11&l=en&pf=0&PI=0&s=Wan%20miniport%20sstp&OS=64-bit 
  Marvell is not available for downloading drivers. I need this driver? What it is? Can I just delete it? Is there a place I can download a driver for it?

  Thank you.

  Hello

  As I said above "just disable the miniport if you want, do not try to uninstall."
  It is part of the network drivers and you cannot uninstall it correctly. You can simply
  ignore it.

  ---------------

  Check with all of the program of these antivirus/security for removal tools
  and/or methods such as uninstalling them will always let its, which can cause the
  strange problems. Run their tools or use their methods to remove leftovers.

  AVG removal tool
  http://www.Avg.com/us-en/download-tools

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  ---------------

  For the mctres.dll:

  The manufacturer of your system will sell you the Windows disk at low cost since you already own
  Windows. It is the best solution if you have the disk with the OEM drivers and
  public services already on it if you need them. If you know someone with a full retail
  version of the drive, you can copy them (it is not protected against copying) and use your own
  product key.

  How to extract the files from the Installation of Windows 7 DVD
  http://www.SevenForums.com/tutorials/42776-extract-files-Windows-7-installation-DVD.html

  How to extract system files missing from the DVD of Windows 7/Vista.
  http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/

  Another option:

  You can also perform a repair Installation that allows you to keep the programs
  and although redundant data backups are always a good idea. (Read the instructions
  in PINK and yellow carefully as not all discs allow this method.)

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Driver issue Microsoft Virtual Wifi Miniport Adapter (error code 31)

  My map of Microsoft virtual Miniport is not up-to-date (it says this when I try to connect wirelessly to something and when I view it in Device Manager, it also has a caveat next to him) and when I went to install in Windows update, it has failed several times to install so I dropped. Now I continue to update the driver in Device Manager but he repeats to me that it is up-to-date, even if it's not! I uninstalled the software driver completely and rebooted my PC in the hope that he would install a new driver software, but it didn't, it just reinstalled the old driver software and it says that the driver software is old and not working properly.

  Either way, I'm running WINDOWS 7.

  Help, please! I can't even connect to the internet!

  Many many thanks Tyler
  It worked right away:
  netsh wlan hostednetwork stop
  netsh wlan set hostednetwork mode = deny