Want 4507: Connection of HP Envy 4507 printer to a desktop using Ubuntu

How can I connect HP Envy 4507 desk top computer printer using Ubuntu?

Hi @wezzyman,

I'm sorry, but to get your question more than exhibition I suggest posting in the Ubuntu forums because it is a problem of Ubuntu. You can do it at http://ubuntuforums.org/

I hope this helps!

Tags: HP Printers

Similar Questions

  • want to connect Apple TV but HDMI port is already in use.  Y at - it a triangle connector I can buy or?

    want to connect Apple TV but HDMI port is already in use.  Y at - it a triangle connector I can buy or?

    Sorry but no.

    Apple TV requires an HDMI cable and a HDMI port.

  • Want 4507: Printing a photo panoramic

    I Envy 4507 printer and want to print an image panoramic.  I followed the tutorial (on this link http://support.hp.com/us-en/document/c03890386) to set up a paper size custom (I use 21.7 cm x 48 cm as a trial).

    The custom size recorded in the box "printer server properties.  However, when I then go to print, I can't find this in the "Printer preferences".

    Any idea on what I can do to fix this?  Or is that my printer is not compatible with custom paper sizes?

    Hello

    Your printer supports custom paper for a specific range format, not just any what size is supported.

    Will not appear any size not taken in charge by the driver, this is why you do not

    The following ranges (Converted centimeters) are supported by the printer for a custom paper size:

    0.76 to 21.6 cm (3.5 to 8.5 in.) wide and 12.7 to 35.6 cm (5.0 to 14.0 in.) long

    You can find the "specifications of paper output > custom below formats support:"

    http://support.HP.com/us-en/product/HP-envy-4500-e-all-in-one-printer-series/5304875/model/7297912/document/c03755986/

  • Want 4507: Printing problems with envy 4507

    I bought my printer a couple of months and everything worked fine. I have not used for a few weeks and now it seems to be a problem. When I print a PDF for example, any black text to print at all. For a Word document, the text (black) comes out as a very light gray. Color of text is fine in both cases. A printer test page prints just color bars, but also some Black hooks. The print quality is fine, its only missing bits.

    This happens if im wireless for my laptop or phone, or via USB connection.  The ink levels are high in the two cartridges, I tried cleaning cartridges and putting back them in place. I also re-installed the latest version of the software on my laptop (Windows 10) and I reset the printer to factory settings. Nothing seems to solve this problem. Someone at - it other suggestions I can try?

    Hello

    Please click HERE to access the procedure which should solve the problem.

  • I want to connect to a Canon MG5320 printer to my new PC which has Windows 8 and I do not know how... The new computer is a HP Pavilion p6 - 2316 s PC Help!

    I don't know how to install a printer on my new PC.  The printer is a Canon MG5320, who is a year and work well with my computer discarded.  Now I have a new HP Pavilion p6 PC - 2316 s and I can not print from it until it is installed. The printer is on and ready, but does not appear on my computer screen as it did on the old computer...  Help!

    [Moved from comments]

    Hi Aggietol,

    1. Visit the website of Canon Pixma MG5320 & driver software
    2. Select the operating system ==> Windows
    3. Select the Version of the OS ==> 'Windows 8' If you have a 32-bit version of Windows 'Windows 8 (x 64)' otherwise
    4. Click on the arrow of drivers
    5. If your printer is connected directly to your PC, select "MG5300 series MP Driver worm." 1.00 has (8/8 windows... «. If it is connected through your local network, select "MG5300 Series Mini Master of installation (Windows 8/8 x 6..."
    6. ...

    Hope this helps at & answers your question.

    See you soon

    LZ.

  • I want to connect an iMac 2009 end to a 5K iMac using target disk mode. I have several related questions.

    The display on my 2009 iMac has stopped working two years ago and I replaced the machine with an iMac of 5 K. At the time I realized that it was not possible to connect the two machines in disc mode target but today I heard the Thunderbolt-Firewire adapter and started to pursue the investigation.

    The hard drive on the iMac 2009 has worked when I he turned on last 2 years ago, but I couldn't see stripped lines colored screen.

    1. is it possible to restore a Bluetooth for the keyboard and mouse when I don't see what is happening? (I removed a long time ago the batteries to store them.)

    2 do I need to use a mouse and a keyboard on the older iMac if all I want to do file transfer between two iMacs using the 5 K as the master of the machine? I expect that the answer is yes because I need to hold down the T key as I start the older iMac in order to Target mode, but could someone confirm it's inevitable? (Where Q1.)

    3 others managed to make the connection in similar circumstances, with a Thunderbolt-Firewire adapter? Is it that I have to be wary?

    Thank you.

    Will of Percy

    Will,

    Unfortunately the target Display Mode will not work with iMacs Retina display. Apple will explain TDM and which machines, it is compatible with the use of your iMac as a display with the target - Apple Support Display Mode

    In addition, he will explain what wiring is necessary.

  • CP1518: Installing drivers without this printer for remote desktop use. How?

    Problem: I'm trying to install the printer drivers for a HP Color Laserjet CP1518 printer on a Windows XP machine without having the printer connected physically, but by using the driver installation program there is no option for this.

    Why:  My CP1518 is here with me in one city, but there is another system of Windows XP in another town I frequently using Office Access distance.  Remote Desktop allows you to print documents on the remote computer and have them redirected to go out on your local printer.  Before this is possible, you must install the printer driver on the remote computer (where he is NOT stuck).  This has always worked great for me with the 6Ps Laserjet and Laserjet 2300 s, and I seem to remember a downloadable "Advanced" installation any which allowed you to simply install the drivers (for example, for COMPUTER technicians who handle settles on a large number of machines on a local network).

    Deadlock: The CP1518 driver install program insists that the printer be detected during the installation process, or you leave.  Is there a way around this approach to "hold your hand" to get the files installed on this machine?  Is there an alternative, stripped, installation driver available?  Any other ideas?

    Advocacy: Any help would be greatly appreciated!

    Thank you

    Jason

    Hi Jasonmckay12,

    Many printers have not a "profession or HE use only driver." Those who do not yet have the functionality you're looking for, but you will need the complete software functionality. This will include the Toolbox to install the driver without the printer at hand.

    This is the software you need, and it is compatible with XP and Vista.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=LJ-70824-1&LC=en&DLC=en&cc=us&lang=en&OS=228&product=3422472

    I hope this helps!

    Best regards

    CDGuru

  • I want to connect my number iMessage from my iPhone to my iPad. How can I do this?

    Be I want to connect to my number to my iPhone iMessage to use iMessage on my iPad how to do this?

    Both the iPad and the iPhone must be on the same Wi - Fi network connection and using the same ID to iCloud. When you're together, you should be able to see a setting on the iPhone in settings > Messages message text. Which lights up and you should see the iPad. Once that is set, you will be able to use the iPad for iMessage and your phone number. You can also use this TEXT message, if the iPhone is close to the iPad.

  • HP Envy 4500: Printer says it has solid network connection, but cannot connect to the internet

    So I have not been able to use my printer wireless lately, so I decided to check if it was connected to my wireless network. It is; I checked, re-connected and checked several times. So I decided to reactivate my web services. I have them turned off, and now whenever I press the button on the printer ePrint, it says connection for a really long time and then displays the message in the sense of "the printer cannot connect to the server. Check the internet connection and proxy settings.

    I have re-connected the printer to my wireless network, I checked that if I use a proxy server (I'm not), I used the HP print and Scan Doctor - just, it won't just matter what I do.

    All I can think about is the fact that I have recently purchsed a new router, but says that its connected which is what really stem me.

    This printer makes me crazy - please help

    Hi @mastersword64,

    Welcome to the HP community!

    I hope you have a pleasant experience with us.

    I want to help you with the connection error, you get on your e-all-in-one of HP ENVY 4500 printer when you try to enable web services.

    Here are some steps, I suggest trying to get your web services up and running it again:

    Network Power Reset:

    We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

    Restore the default settings of the network and reconnect:

    1. on the front panel of the printer, press your up wireless icon

    2. Select settings.

    3. Select restore default network settings.

    4 turn on your printer.

    5. once it is initialized to save, press the wireless icon again.

    6. Select settings.

    7. Select Wireless Assistant , and then follow the prompts to enter the details of your wireless network.

    8. try to activate the web services again.

    Configure a manual DNS for your printer:

    1 obtain the IP address of your printer

    a. This can be done by pressing the icon on the printer wireless.

    2. Enter the printer's IP address in a browser on your computer.

    3. Select the tab network at the top of the page.

    4. on the left, select network.

    5. Select network address (IP)

    6. Select manual DNS server

    a. manual Preferred DNS should read 8.8.8.8

    b. alternate DNS server should read. 8.8.4.4

    7. Select apply. You can get a warning simply select OK.

    Please reply to let me know if these steps resolve your issue.

    Good luck!

  • HP Envy 4500: Printer connected to the network; laptop computer connected to the network; laptop cannot find the printer!

    I searched through the forums and read a few threads about similar questions, but do not yet have a solution to my problem.  The printer is connected to the network (even printed page "Congratulations, you're connected" with all the relevant information).  It is on the same network as my laptop.  However, when I run the exe to install on my laptop, it does not find the printer, even when I put the IP address the printer gave me on the congratulations page!  I have run Avast Free Antivirus 2015 on my machine, but don't see any particularly troubling parameters which could interfere.

    Any thoughts on how I can get the laptop to see the printer?

    Henchman21,

    Thank you for the information you have provided to us. I will be you initial steps that could solve the problem.

    Solution

    1. do you have the HP Envy 4500 connected to your computer via the usb cable

    2. If you have installed the correct software for your HP Envy 4500 and the drivers on your computer, you will need to run

    * Note: If the software and drivers for the HP Envy 4500 does not work or does not work the .exe, you must uninstall it in add it and remove programs.

    2 1a, you should download the drivers and software for the HP Envy 4500 on-site HP click on this link.

    2 2 b If you have correctly downloaded it you must connect the HP Envy 4500 device to the computer via a usb cable and launch the installation. Usb printers will be automatically detected by your computer. Installation of HP Assistant there will be a point he will ask you if you want to configure the computer for wireless connectivity, it's time that all wireless information stored on your computer will be transferred to the HP Envy 4500. If this does not work! and I know that it will not...

    3. you should check if you have administrative rights on the computer.

    I hope that the solution I provided will work for you.

    Let me know if the steps above don't work for you

    Thank you

  • HP Envy 4502: printer connection on my laptop wireless problem

    I installed the software on the disc that came with my new HP Envy 4502 printer on my HP laptop. He says that the software is installed correctly, but the printer is not connected wireless. Have you tried connecting via the usb cable and it worked. However, whenever I try to connect wirelessly, it fails to connect.

    I tried troubleshooting tips sevral time but still have no luck.

    My husband was able to insert the disc into his Dell laptop and connect the printer even wireless with no problems at all. This laptop is Windows 7 Professional.

    I'm getting more and more frustrated by the present, thank you I am a novice where computers re concerned, but that he thought that by purchasing an hp printer to go with my computer hp laptop, things would be easy.

    Help, please

    Take a look at this link on the implementation of WiFi.

  • Want 7460: Slides of Google will not print landscape with my HP Envy 7460

    Hello - I can't get my HP Envy 7460 print Google slips into the landscape.  It prints in portrait, even when I select the landscape in the printer settings.  I use HP Chromebook 14-q039wm with Chrome OS Version 51.0.2704.106 (64-bit) and I'm connected wireless.  Any help will be appreciated. Thank you, Tim

    Hey @timo2,

    Welcome to the Forums of HP Support!

    I see you have a problem with the page orientation when printing your Chromebook to your HP ENVY 7640 e-all-in-one printer. I would like to explain why you are having this problem and provide a workaround solution that may solve this issue for you.

    This issue of guidance is located within the ePrint service. The ePrint service uses the email ePrint impression, rather than print server directly. You don't have full control over the print settings when you print from a Chromebook. Google Cloud Print has the possibility of policy changes, but it is not supported by the ePrint service using your printer. Making changes of orientation will not be an option when printing your Chromebook.

    The solution would be to print from a computer that supports the HP Envy software package full feature and pilot, or print from a mobile device connected to the same network as the printer with the ePrint App installed. The ePrint App allows you to print locally to a network without using the ePrint server.

    If the information provided has solved your problem please click on "accept as a Solution. You can also click the "Kudos, Thumbs Up" on the right to say "thanks!"

  • Want 4520: Cancelled the subscription to instant ink but printer still wants to connect to it

    I cancelled my instant subscription of ink. I also decided to use my printer with a cable.

    Whenever I try to print something now, the software wants to connect so I can use the instant service of ink. I can only print when you click several dialog boxes.

    I want to just a regular old printer connected to my laptop via a cable. How do I convince them what to do?

    Thank you for your help,

    Sabia

    Hi @Sabia,

    I recommend instant contact of ink with 1-855-785-2777. They will be able to provide with support in real-time to rectify everything explain related issues.

    If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

    I hope this helps. Have a great day.

  • Windows XP - want to connect to a remote printer on another network

    I'm in an office that wants to connect to a remote printer on a separate network to our warehouse on the internet.

    Office network is behind a switch, the warehouse network is on a router, both computers we want to connect using XP.  The printer in the warehouse is currently connected directly to the router, but we can connect to a computer by USB.  The two networks have static IP.  We would like to have the printer of the warehouse are displayed on the office computer printers and fax machines as just an another printer if possible.
    I tried to set up a VPN without success and tried LogMeIn but a client computer cannot print to host apparently (and we want that no interaction with the computer of the warehouse on-site, just be able to connect from the desktop).
    Is there a better solution for this?  Anything is possible with remote desktop?  Or should I continue to try to put in place a VPN?

    Hello BGaskin,

    The Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
    TechNet
     
    Thank you

  • My toshiba laptop will not connect to my HP Envy 4500 printer

    Recently, I tried to connect my Toshiba laptop running Windows 8, wireless on my HP Envy 4500 printer. I am trying to scan something on my laptop, I did with the printer before. I have the remote app, and I have connected to the network the printer wireless displays in the wifi of my computer. However, when you try to get the printer to scan, using the option on the printer screen, it says that no device is connected, and to ensure that the software has been installed and this scan to pc has been activated. I opened the application on my laptop, in hopes of getting better results using what it was, but he told me that the printer is offline, if it was obviously on. I'm not entirely sure why the printer doesn't recognize my laptop, even if my laptop recognizes. I spent nearly two hours, disconnection and reconnection, as well as the printer off about three times. I'm about to uninstall the application and try to reinstall, but I'm questioning that results will be better.

    I don't see any other way to solve this problem, because there is no USB port to connect a USB cable don't, like myprevious printer and wonder if it is my laptop, not the printer, which is faulty. It works for printing, when it comes to other devices in my house, but I had problems same impression with my Toshiba before. I tried only with another scanning device: a desktop HP Pavilion Media Center TV PC computer. I'm starting to think that the scanner is broken to only other reognizing products HP and ask any advice to fix this problem.

    Hi AMakkei,

    Welcome to the HP Forums!

    I understand that you can't scan with your Envy HP 4500 to your laptop Windows 8, and I'm happy to help you with this problem of connection!

    To get help, I'll need to know the following information:

    In the meantime, please try go through this guide. A computer"not found" or a Message appears "connection error" during the scanningand let me know what happens!

    I hope to hear from you and have a nice day!

Maybe you are looking for