WANT 5640: Identification of ink cartridges Pronter

Similar Questions

• I want to order an ink cartridge

  I have the HP 6380 printer and I need the black cartridge large... and none of my suppliers, nor any site online can provide me with that one. He has solid black icon Pentagon thereon and same pages HP online are useless to provide me with the information I need to order. I am so angry right now.

  solved.
  http://support.HP.com/us-en/document/c02750681

• Want 5646: Ink cartridge black _ _ _ failure.

  I have a 2 month old HP Envy 5464. I just changed the cartridge to be confronted with the following error _ failure black ink cartridge.

  I tried removing, reinstalling, cleaning, turning off and then on reset but no joy.

  Please advise?

  In the paper here troubleshooting steps can help solve the problem.  Looks like you have already experienced at least some of these steps.  Please go through all the steps.  If the steps it do not solve the problem, you will likley need to replace the cartridge.  If it's a HP cartridge see warranty here information.

• HP Photosmart c7180 - wrong cartridge error - wants introductory ink cartridges that I have more

  Hello

  I need help, error compensation "error message cartridge wrong - use introduction of the ink cartridges that came with the printer. I no longer have the introductory cartridges and have only refill cartridges.

  Help, please...

  Jaye ~.

  Oops, the link I gave before has been registered regarding the C7180.  You can try an partial reset as described in this document.  If the partial reset does not solve the problem try a semi full reset, which is similar, but with the # and 6 buttons.

• HP Envy7640 -: set up the ink cartridge

  Printer purchased just, throughj of work put in place and have message problem of ink cartridges.  Have reinstalled cartridges supplied with the printer and also installed two extra cartridges I bought at the time I bought the printer.  Problem of ink message will not go away I can't find OK to touch.  Help!

  Welcome to the HP community @DesertDon,

  I read your message on the error message problem of ink cartridge that shows your 7640 new desire and I wanted to answer you! I want to try the steps from the link I posted for you below to see if you can work around the error message. If the error does not clear, contact HP directly to their contact information at the bottom of my message here to replace the printer for you.

  HP ENVY 5640, 5660, 7640 and Officejet 5740, 8040 e - all-in - One Printer Series - a 'lack of cartridges' or 'Problem of ink cartridges' Message is displayed on the control panel

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  I hope this information helps you!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• My ink carriage does not move to the way to replace the ink cartridges. I think I put the ink in the wrong office

  My ink carriage does not move to the way to replace the ink cartridges. I think I put ink in bad officejet 3830

  Hello! Welcome to the community @Tammy111 HP

  I read your post about the ink carriage being stuck in your Officejet 3830, and I wanted to respond to troubleshoot. Try these steps and if the transport is not yet move to order so that you can access the ink, then your best bet would be to call phone support to see if they can replace the unit for you. I'll leave their details below.

  HP OfficeJet 3830, DeskJet 3830, 5730 printers - an error 'Transport Jam'

  Click on the thumb to below testify my help!

  Click on the "accept as Solution" if I'm you guide to a solution!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection

  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.

  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number appear

• OfficeJet Pro 6830: Installed new ink cartridges on 6830, but they were not full

  I've been using this printer for about two years now, been through "Print head problem" for both, they exchanged once and replace only the part once.

  My ink colour C, M and there were emptied at the same time, so I ordered all three in an online store. I installed a few minutes ago and check the ink level via the touch screen of the printer. It turns out that they are not quite complete. They are almost full, C and are close to full, but M is less complete.

  I wonder why this happens? I never checked the ink level in the past, but it surprises me. The printer makes some kind of calibration and printhead cleaning to get ready installed ink? (So consumed little ink)

  I scanned the QR code on the side of boxes of ink and checked the hologram stickers and pretty sure that they are genuine. The printer also said that they are authentic.

  Here is the picture of my ink level. Shot after installation of the cartridge and nothing printed.

  

  Another strange thing is the date of installation. Now it is April 4 in my country but the web printer configuration page shows cartridge installation date is April 1! I checked the date and the printer and everything is OK.

  If the cartridges have been used before, the printer screen would show a message that cartridges have been used on another front printer. I saw only me because I kept the old ink before trading in the past as I said up there.

  Please see a screenshot below

  

  Everyone knows what happened? Or it's normal? (The packaging and seal in plastic cartridges seemed fine, nothing suspected weird)

  Thank you.

  Welcome to the HP Forums

  @BlackMiracle,

  I came across your post about the concerns that you have with the help of your new ink cartridges and I wanted to share my own suggestions. The date being out for a few days is a bit strange, but the rest seems normal. Yes, when you install the cartridges, they are calibrated and alignment and clean, that uses a bit of ink. The levels that you see are also "estimated" levels If there are print quality problems or error messages, let me know and I'll do my best to help.
  
  I hope this helps!

  Click the thumbs up below to say 'Thank you' & the "Accept as Solution" If the problem has been resolved it please and thank you!
  
  All the best,
  
  Contact HP:
  
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• all-in-one HP Deskjet 1512: remove ink cartridges

  Hello

  I've just set up my new printer, but the light of attention and two ink cartridge lights continue to Flash.  I can't figure out how to remove the cartridges, so I try to reinstall them.  I did exactly what the instructions said to do, but obviously done something wrong.  Help, please... Please, I am a real novice in all of this, go to A, B, C for me.  Thank you

  @Emerald4043 , welcome to the forums

  I saw your post on ink cartridge problems you're having with your new 1512 Deskjet and wanted to answer with my ideas for you.

  Even if you can not see this specific error message, try the steps outlined in this guide. I have crossed their me and think that images and steps should be useful:

  An "Incompatible cartridge or"Missing cartridge"Error Message is displayed for HP Deskjet 1510, 2540 Deskjet, HP Deskjet Ink Advantage 1510 and Deskjet Ink Advantage 2540 all-in-One Series Printer"

  If you find that the guide did not help and the problem persists, try to give us a call to see what are your printer options:

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Have a great Tuesday

• 6525 adapter black ink cartridge

  I have a printer HP 6525.  I bought a pack of new ink cartridges and fits very well except black.  The black cartridge for installation is about twice the width of one supplied with the pack.  Y at - it an adapter for the smaller cartridges?  If yes where can I get one?  ramroc

  Hey @ramroc ,

  Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.

  You use the HP Photosmart 6525 and you are having problems with the new ink bought because you have a black man who is smaller, then the slot in the transport.

  What happened here most likely bought the HP 564 cartridges with the 5th black cartridge is a black picture for the Photosmart HP 7520. The black cartridge you want to use is the one with a Pentagon on the top, not a bow tie.

  Should resemble what your transport;

  

  Looks like that the transport of HP Photosmart 7520;

  

  You want to make sure that you use the cartridge with the Pentagon not the bow tie.

  Hope this makes things easier for you. Have a good!

• HP Deskjet F4400 series: Hp Deskjet F4400 series on the ink cartridge issue

  I have a black color cartridge in my printerand printing all black and now I'm almost our black ink.  How can I use colored ink that remains in my cartridge I want to throw.

  Welcome to the HP community @Taybey,

  I read on how you want to use your color ink cartridge, and I wanted to tender hand with my suggestions. Maybe you can check the print on your computer settings and make sure that the option "print in black ink only" is disabled, which will allow the color cartridge to use ink.

  Follow these steps to change the default for all print jobs print settings.

• Photosmart B110A: Ink cartridges Setup

  Hello world!

  I have reset my Photosmart B110A (by entering the hidden menu) but now when you want to install it and set it up, the process stops because I did not SETUP ink cartridges, but others. How can I fix that?

  Hi @Daniela3,

  I came across this post which, if you want to try it at your own discretion to see if it helps. I'll send you a PM. In the forum next to your handle name, simply click on the envelope to see.

  Thank you!

• HP Office Jet Pro 8720: Problem set up and launch the new printer & ink cartridge installation

  Two questions:
  First... it takes a LONG time for the computer to open itself.
  Then, when he did initiate... I opened the section of ink cartridge
  to install the ink & transport of ink would not come to the Center.
  SO... I stopped the printer to start again... and now, the
  screen has a spinning wheel indicating "cartridges controls."
  It lasts for more than half an hour.
  HELP... This is a new printer & I can't open.
  Thank you kindly.

  Hi @paulallah,

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you have a printer of HP all-in-one OfficeJet Pro 8720 which took a long time to initialize and is now stuck in a mode 'check' cartridges after the reboot it because transport would not move to the Center. I would like to help with that.

  I would start by doing a Reset of the power on the printer.

  

  If that fails to solve the problem, you might want to speak with HP Technical Support as there may be a hardware problem.

  You mentioned that you are using a Mac running OS X 10.5 Leopard or more. The HP all-in-one OfficeJet Pro 8720 printer is only compatible with Mac OS X 10.7 Lion or later.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Photosmart HP 7510: Change what black ink cartridge is used.

  Our 7510 HP ink slots for small and XL cartridges, however it will not use the small cartridge ink. How to change the parameters to pass to the thin cartridge XL, small is running out of ink and I can't find the black ink cartridge (Photo) in stores now. I bought two 'small', one was a XL, not labelled as such and we ordered cartridges from HP on the web and they were too big too. I need to be able to use the XL Black ink cartridge that is installed.

  Thank you..

  Hello

  First, XL ink cartridges are physically the same size with normal cartridges (same number). The difference is more inks XL cartridges.

  Your printer has 2 black ink cartridges, one narrower called Photo ink cartridge and one large/more bigger called black ink cartridge. When printing in grayscale, the printer will mix all the colors to give B & W. If you want to print black ink only, you must indicate to your printer. Please try

  (a) double-click the desktop printer icon.
  (b) click on set preferences.
  (c) click on advanced.
  d select "Black ink" only for printing in grayscale
  (e) click Ok/apply.
  
  Note: printer must still all color inks and it will consume a very small amount of ink over the warmng of trial.
  
  Kind regards.

• printer says to replace the ink cartridge, even though it is new

  Hello!

  Could really use some help with my printer. I recently bought new ink cartridges and I replaced the "old", but then my printer started to show on the compensation carriage jam error messages, even though it was clear and since then, he has constantly shown this error message on ink. He wants me to replace an empty ink cartridge to continue printing, it won't work otherwise.

  Ink, that I placed in the printer is totally new and authentic, but there is no answer, he displays the same message to two ink cartridges, which makes me realize that it of not really discern who is new or empty.

  If I remove them both, it tells me that there is an empty ink or damaged.

  I tried the reset of the printer, stop it down and turn, but the same message is displayed immediately. The light next to the screen flashes all the time.

  When I replaced the old cartridges I did not process the printer, I replaced them all first and then let him treat. Maybe it was wrong to do so?

  Any help is appreciated!

  It seems to be a problem with either the hardware of the printer or the replacement cartridge. If it is the cartridge, it should be covered by warranty (if it's authentic HP) given that you bought at just. Now, I think that your best shot would be to contact HP Technical Support to see all the other possibilities for you.

  The only other option would be to try an another new cartridge replacement for rule in or out the cartridge at fault.

  If you call in North America, the number is 1-800-474-6836 for all other regions, click here.

• HP Deskjet F380: 21B ink cartridge information.

  Hello Sir, I want to know is that HP Deskjet F380 is also compatible with the 21 b black ink cartridge? With which I have a plus of that query, what is the difference between a Deskjet and inkjet?

  Hello

  Your printer must be very old. Please check the following information:

  http://www.HP.com/pageyield/en-019/yields/DJF380_page.html?cCode=us

  Yes for 21.

  Kind regards.