WANT 5660: Calibration of the disk labels

Similar Questions

• Is the disk hard standard series Equium encrypted?

  My equium girlfriends broke down (motherboard according to the servicescompany) after only two years, and we want to know if the disks are encrypted or special in some kind or standard 40pin IDE disk? We want to transfer the data on the disks...
  (to repair the laptop would cost the same amount of money than buying a new one)

  Hello

  The HARD disk provided with the laptops are not encrypted!
  It is a simple 2.5 HARD drive that can be connected to the second laptop or desktop via the external USB HDD controller.

• Want 5660: Software HP "patches" changed my setup without warning or explanation

  All trying to solve a problem with my printer series HO want 5660, I ran the HP Print application and doctor Scan and him allowed to update my software.

  The behavior of the application behind my icon 'Series HP Envy 5660' is now different.

  Prior to the update of the software, this icon has launched an application that allowed my to manage my printer, doing things like checking ink levels, check the settings and much more.
  After the update of the software, this icon only of the choice to connect a new printer, reconfigure the wireless settings, or add more software.

  I have experienced and fixed me my problem.

  The problem occurred when I ran printing HP and doctor Scan. This 'well designed' software, announced it was changing the configuration of my port. HE DID NOT IDENTIFY WHICH CHANGED, GIVE THE USER THE POSSIBILITY TO ACCEPT THE CHANGE, OR AN OPTION FOR HER. I certainly will not use the utility again and am unlikely to buy another HP product because of bad software.

  Anyway, I solved the problem by removing the printer that has been automatically added to the configuration of my little time after that I configured the printer. and reconfigure the printer that I added manually to use a standard TCP/IP printer port.

  The printer automatically added himself moments later. «The printer is called: "HPCE5020", which is a "printer web services", configured to use port "TH4AL680Q7064T", desctibed as the re-discovery of HP network port monitor»

  E series icon HP Envy 5660 now opens the HP printer Assistant, as it should.

• I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or the usb ports

  Help with my computer of dumping

  I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?

  If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.

• I want to view the properties of folders of files and the size of the files used on the right by clicking on them and the properties of the workstation to see the disk space used. __

  I have trouble finding the disk space used by files and folders individually and when I try to know how much is consumed and free by right click on my computer.  This was easy in XP, but I can't get the answers I need to analyze which uses space, where and how.  What is happening with this?

  Hi NativeLegal Eagle,

  Usually, right-click on the file or folder and clicking the properties option will give the details of the file or folder. The details include, type, size, location, size of the file on the disc etc.

  Make a right click on my computer will not give the details of available disk space on the computer.

  If you want to know the amount of space consumed by a program, then it can be found in the Add/Remove Programs window.
  a. Click Start, click Run, type appwiz.cpl, and then click ok.
  b. in the list, we can find the total space used by individual program running on the computer.

  Note: If nothing is listed in the file properties window or a file, then provide us with more information, so that we can better help you.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system?

  Resettlement without disks

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  You have a hard drive partition to do - but you would need to contact/see the FAQ from the hardware manufacturer (HP, Dell, Gateway, Lenovo, etc) to see if and how.

  Otherwise - you might have to order (pay for possibly) the factory restore/recovery of the value of the manufacturer.

  http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?tag=nl.E539

  If it was built * friend *, you will communicate with them.  Ask your media.

• My hard drive failed and I want to re - install Windows Vista. I don't have the disks, but I don't have the product key. How can I reinstall Windows Vista?

  I have a HD that has failed, the fries, I have a license key, but not the disks of Vista.  I want to reinstall Vista, is there a way I can get new drives if I have the license key and how do I get them?  The rest of the machine is original, just a new HD.

  original title: Vista-new disc

  Contact Microsoft support:
  http://support.Microsoft.com/contactus/?ws=support

  How to replace hardware or lost, broken, or missing Microsoft software:
  http://support.Microsoft.com/kb/326246/en-GB
  # Replacements for Microsoft software or hardware
  # Trade media (CD to DVD or DVD to CD)
  # Replace product manuals

  J W Stuart: http://www.pagestart.com

• My HDD shows this error: "you must format the disk in the M: drive, until you can use it. You want to format? »

  My HDD shows this error: you need to format the disk in drive M: until you can use it. Format you? 
  Please help me! the hard drive is like my life...
  That's the reason of my existence...
  I need in the data and that i will do everything I have to please :/ someone help me
  Please helpppp!

  Original title: WD hard drive problem! Desperately need help. Please

  Hi Arman,

  Thanks for posting your query in Microsoft Community.

  I would say you can remove the drive letter M: using disk management and assign a different drive for the drive letter and check if it helps you to solve the problem and if the drive works very well.

  To change the drive letter in disk management follow the steps below:

  a. open computer by clicking the Start> Control Panel > system and security> Administrative Tools > computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) in the left pane, click disk management.

  c. click the drive that you want to change and then click change drive letter and paths.

  d. do one of the following:

  • For letter an if it has not already received, click Add, click the letter you want to use and then click OK.
  • To change a drive letter, click change, click assign the following drive letter, click the letter you want to use, and then click OK.
  • To remove a drive letter, click Remove, and then click Yes to confirm that you want to remove.

  Additional information:

  Change, add, or remove a drive letter

  In addition, please refer to the steps posted by NakulShridhar responded on October 14, 2011 in the following thread and check if this can help:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-update/you-need-to-format-the-disk-in-drive-j-before-you/4e153784-3217-4425-9c39-48030af82a13

  Warning:
  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• In ultimate windows 7, when I want to paste or create a file on USB, windows says: the disk is write protected. ?

  in Window 7 Ultimate. When I want to create a file or paste a file copied to a USB port or flash memory, windows cannot perform this action and the message: the disk is write protected.but when I used the same USB Win XP, disc is OK and not write-protected.
  I tried this question on several USB key, but the result was the same.
  anydody can help me?

  Hi Saleh2506,

  You can try and remove the disc, remove the write protection (by reversing a tab on the disk), and then try again.

  If you do not have the valve on the USB, try the following steps to resolve the problem:

  1. Click Start , type regedit.exe and press ENTER.

  2. navigate to the following location:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrrentControlSet\Control

   

  3. control with the right mouse button and select new and key.

  4. call it as StorageDevicePolicies.

  5. click on StorageDevicePolicies and on the right pan right click and select new > DWORD and name it as WriteProtect.

  6 double-click it and set its value to 0.

  This will disable the write protection on USB/flash drives.

  Restart your computer and check to see if that fixes the problem.

  Important The above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  I hope this helps!

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I CS5.5 Master Collection and you want to transfer to a new laptop.  The CS5.5 was an update for CS3 Design standard and I have all the disks and serial numbers.  I just uninstall both programs a laptop and install them on the other?

  I CS5.5 Master Collection and you want to transfer to a new laptop.  The CS5.5 was an update for CS3 Design standard and I have all the disks and serial numbers.  I just uninstall both programs a laptop and install them on the other?

  You can do it, but you don't have to install cs3 in order to install your upgrade of cs5.5.

  You can launch the installation of cs5.5 and you will be asked your cs5.5 serial number.  Setup will ask you then select the product (in a drop-down list) calling.  Select cs3 and you will be prompted for the serial number for cs3.

  Enter the correct number at the right time and to proceed with the installation.

  If you no longer need these programs on your old laptop, disable (help > deactivate) before uninstalling so that you can keep your two activations.

• I have CS4 and changed computers.  He has not transferred and I want to know how to make so that it can be activated, I #but not the disk series. How do I do that?

  I have the CS4 and have changed computers.  He has not transferred and I wanted to know how have it activated. I have the serial number, but not the disk. How can I do this?

  install properly using the installation files.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.3| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• I have adobe CS6 on my old hard drive and I want to transfer more in my new hard drive. I don't have the disk that it came on more. How can I do this? also, I never put a single copy on a laptop and it is accepted 2... If this is important.

  I have adobe CS6 on my old hard drive and I want to transfer more in my new hard drive. I don't have the disk that it came on more. How can I do this? also, I never put a single copy on a laptop and it is accepted 2... If this is important.

  Disable (help > deactivate) on your old hd.

  then install it using the installation files and your serial number.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
  • Lightroom: 5.7.1. 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• I want to monitor the disk space and CPU on a windows - DONT see machine

  I want to check the disk space and CPU on windows server 2003 box - DON'T see pltform for windows box all 'fileserver mount' or 'CPU '.  I do not see these services
  for my UNIX/LINUX platforms. What controls what in health platform services, and WHY doesn't show the windows platform the platform services. I have Server 3.02
  talk to the windows client running 3.02 box. I just reinstalled the client on windows
  box and still the same. Nothing in the health platformservices). I restart the HQ server and its
  client also. NOT knowing how to manage the windows box. I can go in manually and add an assembly file server service and name it and then this name appears in the services of the platform
  health. I shouldn't this for CPU, NetworkServer or mount fileserver interface. ???  I talked to John Mark Walker and is well why this is happening?

  I'm not an expert but I have encountered this problem also.  That's why I think it happened to me.

  1. I installed the server and checked it was running and I was able to connect to Headquarters.
  2. I installed my agent on another box and as soon as he said it started successfully killed him so that I could go ahead with the installation of the agent as a service.
  3. I installed the agent as a service and started it.
  4. this particular agent in central administration did not show one of the hard disks or WIN32.

  I fixed it by deleting the agent and put it back.  After you start the agent for the first time and it communicates with the server let it run for a while before you kill to install as a service.

  1. stop the service of the agent on the windows machine
  2. open your command line, change to your agents directory and run hq-agent you to uninstall as service
  3 remove the data of your agent directory folder
  4. use the download of SERVER installation to install your agent
  a. by running setup.bat - full (option 3 for the installation of the agent)
  5 finish the installation of the agent so that your window says 'agent started successfully.
  6. DO NOT CLOSE THIS WINDOW
  7. connect to your HQ and accept your inventory of auto-discovery, access this resource, and you should see that it is only partially completed
  8. Refresh every few minutes and you should see all the icons of availability to change green checks and your additional question as disks and CPU added.
  9. once filled close your agent, install it as a service, and then start it again.

  I was killing my initial discovery officer before he could finish, looks like you have the same symptoms.

• My XP desktop seems to have thrown my 'system tools' function and I want to use the disk cleanup and defragmentation... How to get back the system tools?

  My computer is as I said above a desk with the microsoft XP program and is a little less than five years.  It has been slow and it dawned on me that I hadn't used the disk cleanup or some defrag for a while, but I clicked on start, all programs, accessories, System Tools was is no longer.  I have not been able to access the disk cleanup or defragment option and hope that out there, can someone advise me how to get this feature.

  You can run Disk Cleanup and Defragmenter disk since the start > run box by typing the following

  Cleanmgr
  Dfrg.msc

  You can restore all of the 'Accessories' group (including system tools) by following the directions here--> http://windowsxp.mvps.org/Accessories.htm

  Or you could just create shortcuts to

  C:\Windows\system32\dfrg.msc
  and
  %SystemRoot%\System32\cleanmgr.exe

  Note that % SystemRoot % is the directory where Windows.  You can use this form or explicit as in the example for the shortcut from the Defrag.

• I have a disc of photos that are turned to the side and I want that they portrait. How can I do that for all of the disk?

  I'm a model and the photographer gave me the pictures of the shooting on a disc with the release form. The problem is when I went to open the pictures they are all turned sideways and he wrote a 'read only' and unable to change! Is there a way that I can see without turning my head to the side?

  Thank you!

  Files on a CD or a DVD should be read only... you tried to copy
  the pictures in a folder on your hard drive?

  Place the disc in your optical drive and go... Start / computer...

  Right-click on the drive letter for the drive that the disk is located, and choose... Open or explore...

  Open the folders on the drive and find pictures.

  Reach... Edition / select all... Edition / copy.

  Create a new folder in your pictures folder.

  Right-click on the new folder and choose Paste.

  Open the new folder, and then go to... Edition / select all.

  Right-click on the selected (highlighted) group and in the menu... Choose...
  Properties / General tab... Uncheck (clear) the read-only box / apply / OK.

  Right-click on the selected (highlighted) group and from the menu choose...
  Turn clockwise or counterclockwise.