want to 23 powers on, fan spinns full speed but nothing else

Any ideas? Ive tried looking here but can't find the right strings, or am I the only one to have this, which I doubt... TIA

Hello ahcoraj,

Thanks for the quick response!

As the problem persists after completing all the steps suggested in the above document, I recommend you contact our technical support at the 1-800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

I hope this helps!

Concerning

Tags: HP Desktops

Similar Questions

  • Compaq Presario CQ62 fan running full speed but not overheating

    Hello everyone, Ihad a fear a while ago and I was freaked out. I only am not much with the material so I came to you all.

    I had absolutely nothing on except a browser and youtube. There is no intensive program or anything running in the background when all of a sudden the fan running at full power. It was extremely noisy and scary since it's my first to deal with this. I had the computer for 4 years and I have never rough with her, but a week ago I had someone try to clean, but they have managed to take off the keyboard and that's all.

    I panicked and turned it off only to turn it back on, the problem is that I don't remember the error message I thought it was 90 b and he says that the fan was not working properly

    However this site says the fan was not working or he fell from the tree, which may be the case for them, but for me it worked as hard as possible.

    What should I do?

    I was going to borrow a Tablet, so I can use internet to disassemble and clean.

    However, from time to time I spray outside with the aircan and I have the laptop on stilts, so it is triggered on an angle. I put it down for the first time today to do this.

    ANY suggestions?

    TL; Dr

    Fan worked at maximum capacity

    I think I have an error which I think has identified as 90 b and he said that the fan is not working properly

    I use a Presario CQ62

    Before hand, he worked at the same max thought that the laptop was > warm just a little hot.  AND none of the intensive programs ran

    If they are all the same part I linked will work for you. It's the radiator and fan. You can buy just the fan and replace in your radiator but if all this is so cheap, why go to the extra trouble?

  • Tecra M5 - crashes when you use the docking station - fan at full power but no start the thread

    Hi all

    As I say, I have intermittent problems where the machine crashes when you use the docking station. Sometimes at the beginning of the startup of windows then stalls and powers of fan at full power. If I take off the base of the machine, it works fine.

    I bought this machine because I had one in my previous job and he had found great. However, my only previous also had this problem sometimes when lashing...

    Any assistance received very warmly.

    Thank you!

    Hello

    Stand by. You have noticed this behavior when the laptop is OFF, connect to the docking station and after doing this you turn. Am wrong me or have I misunderstood something?

    Maybe's external screen connected to the docking station?

  • Some mornings, I find my 27 "i7 2009 iMac fan runs full speed

    Some mornings, I find my 27 "i7 2009 iMac fan runs full speed

    Try resetting the SMC http://support.apple.com/kb/ht3964

  • iMac fan runs full speed

    Hello!

    My iMac fan runs full speed when I watch videos online. Is there a way to know what might cause this problem?

    IMac 2013

    10.9.5 OS

    2.9 Ghz, core i5

    8 GB ram

    1 TB HD (900 free)

    Use the activity monitor to find out.

    Finder > Applications > utilities > activity monitor > CPU

    For more information: https://support.apple.com/en-us/HT201464

  • the fan runs full speed at the beginning upward

    HP Pavilion p6-2037cb bought 19/01/12.  Windows 7.  There is no error message.

    When I turn on the computer after it has stopped all night the fan running at full speed.  This has happened several times in the first month.  The first time, he stopped himself after a few minutes.  Then I learned to stop it by restarting the computer simply.  It still works, but what was once happen one or two times a month, happened twice in two days then you worry I the problem worsens.

    It never happens when I use the computer because I don't do anything that requires a lot of cpu or causes a warm-up.  I just surf the web and send e-mail.  No games or videos or TV.

    If it's a problem of connection fan I would like to know the nearest repair service.  I would rather that ship it.  But I can't find a list of authorized warranty repair service center.  I followed the links on HP Support Assistant but got sent to a site that does not list the pavilions.

    I need to know why the fan runs full speed at first upward and where to repair close to where I live.

    Hello mpw101,

    It seems that there is some confusion about the products of your receipt and how he explained. I have passed your thread to appropriate to review team. Someone must be in contact with you shortly so that you can discuss your experience of HP customer care.

  • Tecra A10 - S3501 Power blinks, fan runs full speed.

    Welcome all,

    I have a clients Tecra in the shop, and after having received a good description of what was going on at the tme of failure, I still can't understand it. She was watching a flash video when it froze. On reboot, it will not init the LCD, it seems at least partially POST, the CD spins, and all LCD screens blink as usual. Still no init LCD and the power light flashes green, without cause, is not a binary led post code. The fan runs at full speed directly and remained there for the duration. I counted 20 a second flashing with the fan at full speed, before you turn off the power. Any ideas? Customer has no guarantee, so would be good remedy for her. :-) Thank you and have a nice day.

    THERE

    Hello

    Simply said the screen is blank when snaps for laptop and you can not see anything
    You are able to access the BIOS?
    Press ESC, then press F1 to access the BIOS

    I also recommend to connect an external monitor to check if something would be visible on the second screen.
    Otherwise I think that it s a screen hardware problem or GPU

  • CPU fan run full speed constantly

    I bought a Pavilion Elite m9510f liquidation of Circuit City a week and half ago. Big mistake... because I can't look upon return, but anyway. The compters CPU right at full speed, the box fan works all the time. When I call the technical support they had me check the connection of the fan to the motherboard and set power options to save energy. Problem still exists. They had me also pull the video card to be sure it wasn't this fan, but it was not. They tried to tell me that this is normal... No way should the CPU fan spin full speed all the time. I have no patients must remember and discuss with them righ now since I spent 3 hours on tech support Saturday for a new LAN card wireless, sent me. ERRRR.

    Any help would be appreciated.

    P.S. I downloaded Speedfan to check my cpu core temp and it all say core 4 times are are hormaux 35 c or lower. So I don't think that I have an overheating problem.

    Your pc has 2 BIOS updates. 5.32 5.35 second updated and contains a fix for the problems of your siding.

    http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2100&LC=en&DLC=en&cc=us&product=3876397&lang=en

  • Mac Mini (mid-2010) fan running full speed

    I went on the hard drive of a few years for one SSD OEM and the fan runs all the time.  In my view, there is a connector on the card, which has no connection with it.

    I read that this occurs when the thermal sensor is not placed on the new hard drive.

    How many connection should be here soon out of the drive to connect to the map?

    How can I fix?

    TIA

    The original HD had a sensor taped to the road with adhesive tape double faces. You had to move the sensor to the new drive. Without the detector, the fan runs at full speed.

    What ha [[ERA of the sensor on your Mac?

    nsor.1670547 http://forums.macrumors.com/threads/Mid-2010-Mac-mini-with-Broken-HDD-Thermal-se

    https://www.iFixit.com/Guide/Mac+mini+mid+2010+hard+drive+cable+replacement/3171

  • iMac fan runs full speed after the migration wizard

    Hi, just a clean installed 10.9.5 BONES and then I used the migration assistant to transfer my backup time machine from my old computer. He made the transfer, took nearly 4 hours. Then when he was done he rebooted the computer, and as soon as he started the fans in the computer run at full speed. I have a small (HARD drive fan control) software that I have installed to see the temperature and it tells me 119F and fans are 4962 RPM. Why it does this?

    Once the computer restarts, it said it was computer optimization and it can affect performance, can that cause the problem of fan? I did e-mail importing and installing imessage and now I'm looking at the speed of the fan and it is now 118f 4638 RPM... always very noisy. This computer did not a fan NOISE until I migrated my data.  Help, please!

    IMac is a 3.06 GHz Intel Core 2 Duo

    4 GB OF RAM

    27 ", end of 2009

    1 TB harddrive

    Once the computer restarts, it said it was computer optimization and it can affect performance, can that cause the problem of fan?

    Yes. It should settle down after the Spotlight indexing. Which can take some time, depending on the number of files that needed to index.

    119 ° F is on the colder side of normal and no reason for concern.

  • Satellite M35X-S149: no boot, cs blue light and the fan comes but nothing else.

    I have a * TOSHIBA SATELLITE M35X-S149 * that does not start.
    The blue power light and fan comes on +(fan ran for 5 seconds and stop) +, nothing else.

    Yes, the RAM modules must be verified.
    I remember that one of my friends had a very similar question.
    The power led was ONE and after pressing the power button, the cooling modules was audible for several seconds. But the phone didn t initialize and nothing was visible on the screen.

    Finally, we found that one of the RAM modules was dead
    After the replacement, that everything worked perfectly!

  • Portege is stuck with fan at full speed

    Sometimes even a few times a day.
    There were theories blaming the docking station.

    Once upon a time, an update firmware for the fingerprint, which was supposed to remedy.
    Well, after 4 years of suffering, losing the files, without solution of Toshiba...

    I got it.

    U N I N S T A L L T E M P R O.

    No more problems don't like that, even using the docking station.

    Toshiba's fault!

    Eli

    Well, the problem happens again, once in two weeks, instead of two times every hour.
    I found a way to reproduce the problem in 20 minutes: a 16 GB SD card full format,.
    Once I uninstalled "Toshiba PC Health Monitor", I could format the work of 2 hours.

    Good luck.

  • Qosmio G30 fan at full speed

    Hi all

    I had my motherboard replaced undery guaranteed because of the graphics card being dead a year after purchace abd now the machine works fine but has a boring top speed fan spinning at the instance I press the ignition button. The official repair center are closed this week and so I tried some software to slow down and also a bet to update BIOS but with no luch... any guy of suggestions?

    Hello

    I rather suggest you wait until the service center opens its doors and send your machine for them. It would be better then try something yourself and screwing of your machine.

    Welcome them

  • Fan at full speed at startup

    I have a HP Pavilion dv7-4071nr laptop. I am running Windows 7-64 bit operating system. The version of the BIOS is dated F.29 07/11/2011. I started to receive an occasional error of fan cooling, 90 b, startup code.

    I hope someone can explain the behaviour of my computer and recommend a solution:

    (1) as soon as I turn on the laptop the fan starts to run at high speed. Even if the laptop is cold the fan begins to operate at high speed.

    (2) the fan will continue to operate at high speed as long as the computer is on. I can leave the computer just sat there, no applications running, and the fan continues to run at high speed.

    (3) the computer feels hot. HWMonitor reports various temperatures around 50 C.

    Now for the interesting part:

    (4) if I take the laptop to the front, for example, I take the front of the laptop on opposite sides of the mouse pad and lift, the fan will slow down to low speed, what I would call normal speed.

    (5) if I let the computer warm up, take it by the front to let the fan slows down and then place it down just to the right, the fan will then appear to function normally. He speed up during its use more heavy and slow down when use is reduced.

    (6) at any time the computer thinks excessively hot.

    No explanation for this behavior? Bad fan? Bad connection?

    Thank you.

    Hello

    its time now for the replacement of the fan but before goin to the conclusion that I will give you some

    1. update the version of the bios of the hp.com site by entering the product number of your computer under software and drivers.

    2. then download available for the computer bios and install it the fan runs should come down in the same case

    3. can update the latest version of the software on the computer hpsa, and restart the computer hoping that this should fix the problem if not

    Then, it's a time to replace the cooling fan of the computer.

    By clicking on the White Star congratulations on the left is a way of saying thanks!

    By clicking 'Accept as Solution' on an answer that solves your problem helps others who are looking
    Although I work for HP, my messages and responses are my own opinion and not of HP.

  • Power supply, fans, lamps, but nothing else - Presario SR1000

    Hi can anyone help? I have a (HP) Compaq Presario SR1000 and its failure to start. Worked perfectly since I bought it a few years ago. Close last night and does not properly start this morning.

    Problem is that push the button of power as usuall and fans start emits light at the front of the computer, but there is no noise readers activation and does not raise the monitor to come. It's like a processor or software problem. I was wondering if anyone has had similar problems or know what may be the potential cure.

    Any help appreciated. A soon Guy

    Thanks for the suggestion, but it turns out to be the graphics card that failed. If new more powerful graphics card and everything back to normal now. Thanks for the help.

Maybe you are looking for

  • Video of Firefox os formato

    Gostaria saber than formato video LG D300 mourned. Ate momento Beauté Yes aceita 3gp e gostaria to avera mudancas UO be tem app as powerful outros formatos mp4, rmvb, mkv, etc...

  • help with a computer laptop ze2308wm

    the computer at all turns. no light is on and I know that the charger works because I tested it in another laptop and it works beautifully. any help would be appreciated.

  • I installed El Capitan, applications keep crashing.  How can I fix?

    I installed El Capitan and applications crash and some will not even open.  How can I fix?

  • Photon: Make file mp3 into a ringtone

    I downloaded a ringtone mp3 file. I would like to move, I can see it as a ringtone. Anyone know how I can move it in download folder to the area where the rings appear on the phone. I want to add as a contact ringtone. Thanks for your help.

  • HP Pavilion 500-319NA: new to < see below > graphics card

    Hello I am new to the computer upgrades and know almost nothing about it, so please keep any simpler answer and understanding as possible. My computer is the "HP Pavilion 500-319na". It contains the graphics card "NVIDIA GeForce 705" (I think it's a