Want to 700-230: how to access the BIOS on machine with wireless keyboard and no keyboard on the PC port

Similar Questions

• HP laptop - 15-ac121dx: how to access the ram on a 15-ac121dx modules

  I want to upgrade the ram in my HP laptop - 15-ac121dx and maybe the hard drive, but I can't understand how to access the ram. There is no access panel, and unlike some other models, it doesn't have a single lever in the battery bay to remove the cover.

  OK, I realized how down low on the laptop.  After watching some youtube videos I came across another HP laptop computer who had screws under the rubber feet and of course there are also screws under the back of two rubber feet, can't believe I didn't think to look under them.

  To get the background you need to:

  1. Remove all the screws on the bottom.  (Must be 12 total)
  2. Remove the drive from DVD (Yes it does not).
  3. Finally, carefully separate the case around the side.

  After that, you should have full access to the slots of RAM and hard drive.

• Re: Satellite Pro L450D - 12 X - how to access the recovery partition?

  Hello

  I've formatted Windows 7 with a Windows XP CD but did not setup. I wanted to know how to access the recovery partition to set it by default, everything exists on the laptop right now is Ubuntu, but I don't know, I saw an additional partition that must contain recovery files as laptop did not come with a recovery disk and unfortunately did not create a filter.

  How can I access the recovery partition on the laptop having in mind, I formatted the drive Windows 7 was installed on or should I activate or something like that?

  Any help much appreciated

  Hey,.

  On the second partition of your laptop (data partition), you will find a folder named HDDrecovery and it contains recovery files. The problem is that you can use the HARD drive only with the pre-installed operating system recovery feature. It would mean in your case it s too late now and it s not in use anymore.

  You have created the Toshiba recovery disc as mentioned in the user manual? If Yes, you can use this disk to restore to factory settings. Just boot from this CD and follow the instructions on the screen.

  If you don t have the recovery disc, you can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

• How to access the tab 'Save all' when I close several jpeg files that have been adjusted with the "color adjust tool? He is currently making me close and save one at a time. Thanks for any help :)

  How to access the tab 'Save all' when I close several jpeg files that have been adjusted with the "color adjust tool? He is currently making me close and save one at a time.  I've just upgraded to El Capitan.  Thanks for any help :)

  I assume that you use the application overview.

  I can't find an answer to back up everything, but a workaround could be while the file menu options are visible, press the option key

  and the point of the window will become close, if you click on that dialogue will ask you if you want to restore the changes or save

  pressing Save will close the image with the changes and then move to the next image and so on.

• How to access the sbRIO DIO pin

  Hello

  How to access the pin the sbRIO DIO.

  I enclose the code. According to the code of the indicator DIO2 is supposed to blink, but it is not happenning. Can someone please review the issue and let me know (ASAP) where I was wrong?

  P.S Its URGENT!

  Your FPGA code is more complex that it should be.  Something like this will do what you want.

  

  Now your RT code... You are simply flashing the fater LED that you can see.  While some expected between your output setting.  I would also use a shift register to store the current value and then just reverse.  In this way, that you have only 1 entry per loop.

  

• Multiple column trees: how to access the data in columns? There is a bug?

  Hello

  I have a strange problem. I use tree column multi like this:

  

  In this case, I have the tree column and two other custom columns.

  Now, how to access the data in the SECOND column?

  We can write all the data in a row thanks the EditElementTree:AddElement:ChildText, because it is an array of strings.

  However, when I want to read the data, I use ActiveCelltring, meaning that a SINGLE string and not a string table oO (so I only have the value of the first column and never others.

  So, I can do what I want? Is this a bug?

  Thank you very much

  R0b1n

  OK, I have the solution.

  We play with the ActiveColumnNumber attribute, to read the values of different...

  I left the message, it may be useful for later someboby

  R0b1n

• How to access the BIOS on an Acer Aspire V3 - 571 G-9636

  How to access the BIOS on an Acer Aspire V3 - 571 G-9636.

  I want to disable UEFI and secure boot.

  I tried pressing F2, from switching on the laptop of a closed state.

  I tried to hit once, several times he spamming on boot to the top. The laptop still start with windows 8 and I want to remove.

  It is an old NET, but I see a lot of traffic to it if I want to provide an official solution for her. The thread is locked because of his age, please pick up a thread to update or do not hesitate to post your own!

  Here's the article on How to access the UEFI (BIOS) for Windows

• LaserJet 8150dn start button is stuck - how to access the mechanism internal?

  Can someone tell me how to access the internal mechanism of the switch so that I can repair or replace it. My LaserJet 8150dn works very well (it is plugged into a power strip which has a power button) but the switch is blocked. He is pushed back and he does not feel as there is no 'spring' behind it more to push back in position.

  I don't want to arbitrarily start unscrewing panels external printers.

  I did a search for repair instructions, but all I get are sites that offer their professional services. Given that it is age of pay a repairman to work on it would not be a wise investment. Any help would be appreciated. Thank you

  Hi azsigningagent,

  It is a product of the profit margin. For the best answer to your questions, you need to transfer your question at the following links.

  http://h30499.www3.HP.com/T5/business-support-forums/CT-p/business-support

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413

• VM simulator - how to access the file system.

  I was wondering if anyone knows how to access the file vmware playbook simulator system.

  I don't want access programmatically, I covered, for access to the file system to copy files to the Simulator in shared directories.

  When you connect a playbook on the USB, it shows up as a drive, and I would like access to the same playbook vm dir structure to copy files for testing. for example if your s app access the pictures on the camera, I would like to copy some images for the test. Any ideas?

  TIA - dave

  Search the forum for more information on using 'ssh' to access the Simulator and more specifically help 'scp' or 'sftp' to transfer files to. You will do this in the files under/accounts/1000/shared, and if you're on Windows you will probably be to install PuTTY to do this. Feel free to ask for help more once you have dug through it all.

• How to access the url of the page referred by using script Idoc?

  How to access the url of the page mentioned by using Idoc script...

  For example

  If the following url (http://myhost/mysite) is called by the end-user, it redirects to the UCM login page.

  The page of connection, so I want to get their hands on the referring here (http://myhost/mysite). To do this, I followed the following documentation.

  I put IdcAuthExtraRequestParams = referer in

  /base_domain/UCM/CS/bin/intradoc.cfg and

  /base_domain/UCM/CS/config/config.cfg

  UCM server restarted and Http server.

  Used < $HTTP_REFERER$ > in my htm file. It does not display anything.

  Can I know what went wrong? Is there an alternative way to get this?

  @Jon, I saw some variables such as ssOrignialUrl have the information in the console, but they are lost when its consultation: in page.

  I pulled out the tracedump to the page itself, which gave me a new variable<$AUTH_TARGET_URL$> that contains this value.

  Thanks Jon at made me think so

• How to access the Clipboard Premiere Pro?

  I don't know if I need to use the SDK for it or not.

  Basically, I want to be able to COPY items different lots of first, as presets, transitions and clips... in the Clipboard, one at the time and then all of this Clipboard information SAVE somewhere where it will not be overwritten when the next thing is copied to the Clipboard.

  Then I'll program a system (probably using AutoHotKey) where any particular item can be recalled and placed in the active Clipboard, then pasted directly into the first as usual.

  This would allow me to use customized keyboard shortcuts to instantly apply any effect I want, any transition I want and any group of clips that I want the timeline... incredibly easy and flawless.

  I tried to use the function clipboardAll() to autohotkey (Clipboard and ClipboardAll), but it does work for the copied elements in first... only for the text and images and things like that. It seems to me that the first has its own special Clipboard it uses for the more complicated things like copy effects or clips on the timeline.

  Once again, my question is, how to access the Clipboard Premiere Pro ? Where this file is located in the Windows? I searched through all folders in AppData first and I don't see anything that resembled the Clipboard information... I do not know if this is the right place to look.

  I downloaded the SDK, but I don't see any information on the Clipboard in the included help file, so I don't know if the SDK may be useful for this.

  I am so, so grateful if someone could help me with this. I'm a video editor, not a programmer, so this kind of thing is not very easy for me.

  There is no way to access the Clipboard Premiere Pro, in the way you described.

  What do you do with the items you want to copy? Perhaps there is another way.

• How to access the tool feather in 13 elements Adobe? All I can find is the pencil.

  How to access the tool feather in 13 elements Adobe? All I can find is the pencil.

  Unfortunately, the pen tool is only in full Photoshop, not in any version of the EP. The closest is the text on the custom path tool, which has a kind of rudimentary pen tool to create the path where you want to place the text.

• How to access the attributes of VO through binding...

  I have a lookup table that has 2 columns namely encode and attrib.

  I created a ViewObject with SQL like:

  SELECT THE CODE, REFER TO THE STUDY_TYPE_CODES

  And he stated in an Application Module.

  Now I want to post it to the end-user as part of a selection
  that should show REFER to but returns the value CODE.

  I want to iterate the elements and generating the choices myself.
  So I tried this on my page:

  < af:selectOneChoice label = "Test" required = "true" >

  < af:forEach elements = "#{bindings." Var StudyTypeCodesVVO1.allRowsInRange}"="row">

  "< af:selectItem value =" #{row.code} "label =" #{row.describ} "id ="si3"/ >

  < / af:forEach >

  < / af:selectOneChoice >

  It gives an error. Looks like how I use
  "#{row.code}" or "#{row.describ} ' is false.  If I ' # {line} "then
  It's OK, and I could see that the line is a

  ViewRow [oracle.job.Key []]

  But I do not know how to access attributes by name 'Code' and ' means ".". " I also tried
  "#{rank." Code}"with the capital and it does not work.

  How to access the attributes 'code' and 'describe' of each line?

  Kindly help.

  Thank you.

  Check the RangeSize property on the iterator to pageDef.

  Dario

• How to access the vmware workstation without files *.vmx or *.vmtm

  Hello

  I want to know how to access the file hard thanks to vmware workstation if .vmx or .vmtm have been misse.please give me the solution

  thanxs in advance

  You can create a new machine virtual without any disks, once created the virtual machine and add your existing drive. ..

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!

• How to access the checkbox in mx:list

  I'm trying to access check boxes in my list

  < mx:List itemRenderer = "mx.controls.CheckBox" x = "0" y = "153" id = "listVocab" height = "297" width = "313" > < / mx:List > "

  but I can't find a way. That's what I do

  for (var i: int = 0; i < listVocab.numChildren; i ++)
  {

  If (I want to access the box here to see if she checked and then create the below but I don't know how to access the boxes?)

  {

  This gives me access to the text, but

  var password: String = listVocab.dataProvider [i] m:System.NET.SocketAddress.ToString ();
  
  }
  }

  Problem is with dataProvider your assignment to dataGrid is of type array of strings, which is why its saying selected there is no property to the string.

  Code given above by will work me for collection arrayCollection whose objects are of the following type instead of simple strings:

  public class CustomClass
  {

  public var data:String; Here id, you can store
  label public var:String; here Word you can store
          public var selected: Boolean;
  }

  You can make the change to

  public class CustomVocabulary
  {
  public var sentence: String;
  public var type: String;
  public var dbId:String;
  public var words: ArrayCollection collection; This will contain objects of type CustomClass.
  }