Want to DIAdem units pull out of my RAW file and save as avenues of treatment

I'm new to tiara if I appreciate any help offered.

My data (.txt) comes in the first line is my name of the desired channel, the second line is unity, and then the remaining lines are all my data. I'm trying to configure the wizard to import .txt so that it takes the unit off the data line and records as a unit in the channel property, for all channels (not all channels hae the same unit). How can I do this?

Thanks for your help

Advertisement

jmcnally,

Change the type of line 2 to channel, and then click next two times, and you'll be in the channel properties window. Here, you can set the first row to the name and the second row to the unit.

Think of the lines that you select in the window of the file as property group Structure, and properties of channel data. The name and unit are the channel properties.

I hope this helps!

Michael

Tags: NI Software

Similar Questions

  • Want to edit a PDF file and save it to the same folder

    I have PDF files that have been scanned in, unfortunately some of them are upside down that it will be difficult for the data entry clerks enter.  I just want to be able to rotate and save the PDF files to the same folder.  When I try to save the file after I straightened, I get the error message below.  I can do what I want.  I can save to a different file, but it's tedious as whenever I have to locate the file moving through the directory tree.   Committed to the seizure data doesn't have access to the single Reader Acrobat XI.

    I have

    Try turning off the preview in your windows Explorer window. The file is open, it is perhaps the reason why that acrobat cannot write to it.

  • Questions about the export of the files (tab out, location of export file and preferred Format)

    Hello

    I exported just my first movie PrPro test.

    Three questions.

    1. I'm a little worried because before I exported it, no picture was visible in the tab out of the export settings panel.  I wanted to use to check beforehand that I had no black bars, but all that I had was a black screen, as seen immediately below:

    Screen shot 2011-03-02 at 9.43.30 PM.png

    2. my sequence has been properly exported.  But where it has been exported to?  How can I learn where?

    3. Finally, I would like to present my film 100 trees, which hopefully completed by April 19, a handful of middle and high level film festivals.  I turned it in 1920 x 1080 24 p.  What export format would probably work for the largest percentage of film festivals?

    Thank you!

    Matt Dubuque

    Matt,

    I can't comment on # 2 and # 3.

    2.) exported the file will be located where you chose for the destination folder. If you did not note that, just go through the process to redo the export, but note the destination folder (should be a sticky, so that it won't change until you change), but do not go through the complete export - cancel just, once you see the destination folder. Otherwise, you can search your system for the name of the sequence, or anything that chose you as the name of the export file.

    3.) there is not one answer for this. I communicate with each festival and ask for them plug complete standard for presentations. They all have the same maybe, but you may need to make several exports, one for each festival. Let them tell you what they want. When you get their spec sheets, if you have any questions, come back to this thread and post their requirements, and someone will be able to help interpret the requirements.

    Good luck and good luck to the festivals!

    Hunt

  • IM connected to an old hard drive and I can't pull the top of all files and the document that are saved on it that I hurt myself?

    problems connecting to seprate hard drive what can I do?

    What exactly happens when you try to retrieve files?

    If you get an "Access denied" message, please see how appropriating a file or a folder in Windows XP , which also applies to Windows Vista and Windows 7.

    Boulder computer Maven
    Most Microsoft Valuable Professional

  • I have windows 7 os. a virus ripped through my registry and pulled out of the recovery points.

    I have windows 7 os. a virus ripped through my registry and pulled out of the recovery points. Removed the hard drive to retrieve data on the device of the black widow on another computer, but cannot access the data due to password protection. How do my stuff? I know that I have to wipe the drive and start over, but I want my files first. I can see them working with the original BACK on the laptop, but they can't get out.

    Hello

    You posted in the Forums of Windows XP if you say you have Windows 7 so be careful
    When you enter your Questions.

    Answers - Forums of Windows 7
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7

    ---------------------------------------------------------------------------------------------------------------------

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be harder to detect as
    the cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
    It will display all the infections in the report after you run - if it will not run changed the name of
    TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
    check with the other methods below.
    http://support.Kaspersky.com/viruses/solutions?QID=208280684

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/products/malwarebytes_free

    SuperAntiSpyware Portable Scanner - free
    http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
    security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
    here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    -----------------------------------

    Original version is now replaced by the Microsoft Safety Scanner
    http://OneCare.live.com/site/en-us/default.htm

    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    ----------------------------------

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    After the removal of malicious programs:

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    ======================================

    If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
    MALWARE IS STILL PRESENT).

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    =======================================

    For extreme cases:

    Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
    This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
    uses aggressive methods to detect these threats, there is a risk that it can select some
    legitimate programs for removal. You should use this tool very carefully and only after
    you have exhausted other options.
    http://us.Norton.com/support/DIY/index.jsp

    ================================

    If you are in North America, you can call 866-727-2338 to get infections of virus and spyware.
    See http://www.microsoft.com/protect/support/default.mspx for more details. For international information,.
    see your subsidiary local Support site.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • I've recently upgraded to CS6. For some reason any floating document windows that I move in the workspace, pull out the interface, especially to the left and sometimes to the bottom of the screen. I gave tried Essentials rearmament and Interface to d

    I've recently upgraded to CS6. For some reason any floating document windows that I move in the workspace, pull out the interface, especially to the left and sometimes to the bottom of the screen. I gave tried Essentials rearmament and default setting Interface. A message letting me know that by default has been reset but I still have the problem. It's SO frustrating as a large part of the time I can't go to the window, I want to work on. Help, please!

    Hi John

    Try resetting preferences

    Press and hold the CTRL, ALT, shift (Windows) / command Shift (MAC) Option in starting up of Photoshop.

    Select Yes

    Note:-make sure you backup Presets/stock/Modified Workspaces/Plugins (if any)

    Thank you

    Assani

  • I want to know why when I restart the computer and save it that I restart the computer came out black background

    I just want to know why every time I restarted the computer I save then come out of the background is black, I put the f1 not the way I had before why now I guess that something is missing can fix you it for me please

    Hi linsugr,

    Do you know when this started?  The simplest solution because I have no idea of what is happened to cause this is to restore the system to a point BEFORE this problem started (and give it a a few days to be sure).  If you use Windows 7, see:http://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, see:http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, see:http://www.bleepingcomputer.com/tutorials/tutorial56.html.  If the first attempt fails, try to go back a little further and see if you are met with success.

    I hope this helps.

    Good luck!

  • Plug pulled out

    I have had my Sansa Clip plugged into my computer to sync music.  He was inadvertently pulled out during this process.

    I know it is not supposed to be, damage.

    Is it possible to recharge or difficulty this mp3 or do I have to buy a new one?  Unicorn

    What was the result? How it does not work properly?

    A few things you can try:

    1 reset the player (hold down the switch to 'Works' for 15-20 seconds), then try to put it on again normally.

    2. If you can access the menu, the reformat. Settings > Format > Yes

    3. If you cannot access the menu, connect the player into recovery mode. 'Hold' switch, then press and hold the Center button while connected to your PC. Next, create a file named "sansa.fmt" empty text and copy the partition of 16 MB - FORMAT in Windows Explorer (aka 'My Computer') or whether it is the equivalent of your operating system called, then disconnect the clamp. It should restart and format.

    NOTE: Options 2 & 3 will delete all files from the user to the reader, but I guess you cannot currently access in all cases.

  • I want to buy adobe where I can save and print in PDF format, also check out files, editing files etc... I also want to have photoshop when I can make nice ads and brochures.  Which plan is for me? Thank you.

    I want to buy adobe where I can save and print in PDF format, also check out files, editing files etc... I also want to have photoshop when I can make nice ads and brochures.  Which plan is for me? Thank you.

    Hi mirelas80826977,

    As you search for the Acrobat application and two Photoshop then either you can go for separate program Adobe Document Cloud programs and CC photography

    or go for the Creative individual cloud program

    View all rates and details here:

    Plans and prices. Adobe Acrobat DC

    Pricing plans and creative Cloud membership | Adobe Creative Cloud

    Thank you

    Abhishek

  • Incorporation of links within content drop-pull-out tray

    Hello

    I have incorporated a number of Pull out trays in my DP that work very well. I would like to now include links in the content of the moving image. The content is essentially a numbered list that is

    (1) part 1 - the beginning

    (2) part 2 - the Middle

    (3) part 3 - the end

    So I would like the user is able to pull the tray, scroll, then press 1) and move to a specific page within the RFP.

    I though I could convert the text of each list item in a button, then use the 'Go to Page' or 'Go to URL '.

    However, when I try to group each button convert to a single piece of content, it seems to work.

    Is there a proper way to achieve this functionality?

    Any advice greatly received.

    Kind regards

    Iain...

    Create buttons without actions until you group objects that make up the frame of content. Give a real name as part 1 button instead of button8 to each button. After pasting the image contained within the container, use the layers panel to select the buttons and add actions.

    There are examples of this in the ends of DPS > Advanced overlays.

  • Pull-out trays, side and bottom edge question

    Hello

    I tried to renew my DP app after it was rejected for the App Store, by adding a few pull-out trays with scrollable content.

    Can I place several bins pull-out on the right edge, but when I also creates a pull from the bottom edge test it stops the other pull-out trays work properly, IE scrolling of stopped in the status bar.

    Is it possible or can you not pull-out trays on the edge of right and at the bottom of your DP?

    Kind regards

    Iain...

    They may not overlap.

  • Pull-out tab in InDesign CS6

    Hello

    I'm fighting to create a pull-out tab in InDesign CS6. I tried the method described by Colin Fleming in his video, but this no longer seems to apply.

    How do I go about creating a (horizontal) pull-out with the new DPS Tools tab? Scroll frame?

    Thank you

    Tess

    Yes, use a floating frame.

    Bob

  • I was in my email address and hitting a web address that I thought was going to take me to an article. Instead he took out my email all together, and I can no longer

    I was in my email address and hitting a web address that I thought was going to take me to an article that I wanted to read. Instead he took out my email all together, and now I can't open my e-mail address.

    What? Thunderbird does not open? or do you mean something else?

  • I'm doing a script that takes a list of e-mail from a text file and then allow me to select a save as a string. I found some ways to get the path of the file, but I'm in check by pulling the list

    I found some ways to get the path of the file, but I am defeated by pulling the list from that. the function of the path get gives me the path as "Macintosh Users:: Documents: extractedb.txt (myUsername).

    What I can't understand is how to get a dialog box to display a list that represents the content in the text file, I need to change the contents of the text file, I need the box to show me what I chose and I want to save my selection as a single string.
    e '.

    example of extractedb.txt information:

    [email protected]

    [email protected]

    [email protected]

    * has a random number of emails as well *.

    I want this is to pull those emails from the text file and turn them into a list so I can get to be a selection in my dialog box.

    Any help would be great = D

    Assuming you have a text file with your example e-mail addresses, the following AppleScript will read this file in a list (mf_List) and then use this list as input to choose among the list. Because multiple selection is allowed (control button), the output is sent to a list (sel_addr). We check if the Cancel button was pressed by testing for false and if this condition is met, we the script error.  Based on a single or multiple list item content of the list, display accordingly.

    game of mf to ((path to the folder as text) & "mail_list.txt")

    the value mf_List to {}

    the value sel_addr to {}

    the value mf_List to paragraphs of (read file mf)

    the value sel_addr to (choose from the list mf_List with title ¬

    ('Mail list' with multiple selections allowed without empty selection allowed)

    If sel_addr is equal to false then

    Error number-128

    return

    end if

    If length of sel_addr is equal to 1 then

    sel_addr display dialog box as text

    on the other

    the value Point to the text of TID to AppleScript delimiters

    the value Point text in AppleScript return delimiters

    display the dialog box elements of sel_addr in the text

    the value Text of point AppleScript delimiters to TID

    end if

    return

  • computer is spit back out dvd but will keep and play the game disc

    have a dell studio, he started being silly, it will read and play the game disc. partially, it reads the disks if recording information. but it wen I put it in a dvd takes it turns around inside like its gona read but it spits out back. IV run virous scans and updates and I cheak all system files and every thing seems OK Please help

    Hello

    Check with Dell Support, their online documentation, drivers, diagnostics and ask in their forums
    on the problems known.

    Dell support
    http://support.Dell.com/

    Dell support drivers - product manual & warranty Info (left side) - and much more
    http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

    Dell forums
    http://en.community.Dell.com/forums/

    ----------------

    Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of
    themselves at the start because they will be competing for resources. This does not mean that this issue has been
    caused by those, however, it's a possibility depending on which and how many you have installed.

    You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
    Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
    correctly.

    Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

    Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

    CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
    tolerances. They may be delivered, but it is generally more economical to replace the disk.

    Several good info here:
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
    http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

    -------------------------------------------------------------

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================================

    After the foregoing:

    References to Vista also apply to Windows 7.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The DVD player does not work after installing Windows 7
    http://support.Microsoft.com/kb/975270/

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and the
    correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry settings for your
    CD/DVD drive someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays
    all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

Maybe you are looking for