Want to go wireless to use another connection by the web

Similar Questions

• I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

  I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

  I put in place already to extend the wifi of my modem still connected to the modem via ethernet cable.

  Now I want to be considered on the floor and use it to extend the wifi without ethernet cable

  The AirPort Extreme can extend only wireless signal from another router from Apple, so if you want to take the AirPort Extreme on the floor and extend wireless signal, you will need another airport connected to your modem by Ethernet cable router to produce the wireless signal that will extend the extreme on the floor.

  Another way of saying the same thing would be to say that if you want to extend wireless using a router from Apple, you'll need two of them do... because AirPort Extreme is not compatible with a third-party modem or modem/router for this purpose.

• Unable to connect to wireless internet; can only connect to the network, saying "Local only" or "limited connectivity".

  I have problems to connect to any wireless internet - home, library, coffee shops.  He used to work, began to get in trouble (i.e. could not connect sometimes to the diner, but works in the library) and now does not connect to internet AT ALL wireless.

  Only connects to the network saying "local only".  And I'm lucky even get that much.  Furthermore, I don't know if it's a router problem or what, but it does not even accept the password for my home network (my boyfriend has no problem on the internet with Windows 7 and the current router password).

  I use a HP G60 laptop (maybe?), I don't remember the model exactly.  Windows Vista.  I am frustrated beyond belief.  I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

  In summary: is it a hardware or a software problem?  It seems to be a software problem that can have an impact on the material.  Nevertheless, what can I do to fix this?  Y at - it a software update, I need to try for my wireless card?

  This computer is not yet a year old, and already I am unable to use it for the internet.  Not very well I plug my ethernet cable router wireless in the library.  I bought a laptop for a reason, but it is on track to achieve more like a desktop.  Very disappointing.

  Someone, please help!

  I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

  Is this a hardware or a software problem?  It seems to be a software problem that can have an impact on the material.  Nevertheless, what can I do to fix this?  Y at - it a software update, I need to try for my wireless card?

  Hello

  When the man from BestBuy, fortunately for us technology is not a cleaning product, there is no way of knowing if someone puts his hand on it and knowing what is wrong rather than moving oral reprimand...

  First step, log on to the HP support and download the latest drivers for your wireless card.

  The HPG60 is a very good phone but its wireless card has problems with old drivers.

  In which case it's a hardware problem, contact HP support.

  In general, you can use this process to find out what's wrong with the wireless.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• OfficeJet Pro 8625: Which of the 4 rear usb ports can I use to connect to the computer

  There are four USB ports on the back of the printer.  Group of two ports on the top and another group of two below.

  Which of the 4 ports should I use to connect to the printer.  I intend to use the ability to fax from the printer.  Best, Aaron

  Hi Aaron,

  There is only a signle USB pet at the back of the printer, not 4

  To connect the printer to your PC, plug the USB to the USB Port rear, as shown below:

  

  To connect the device as a Fax, connect a phone cord from 1 d to a wall phone jack.

  Kind regards

  Shlomi

• I am connected to a wireless network. I connect to the Internet, but not for the world wide web. How doe to fix? the message I get is cannot find server

  I have and you are using a router D-Link 601. I connect with a desktop computer and 1 another laptop. The laptop which does not connect on the web is an older Compact. I always use Internet Explorer 6.0.2900.xpsp_sp3.101209 - 16471C. Previously, I had dial-up and no problelms.

  Hello

  This helps remove all connection settings information that computers in Internet Explorer?

  Kind regards

  Hans

• WANT to 114 does not connect to the Web server

  Have installed a 114 WANT, everything works except for the webservices - wireless eprint etc.

  I tried everything-

  1 re-install services - error cannot connect to the web server

  2. Update - error cannot connect to the web server

  3 give the static IP address

  4 restore the default settings

  I have an internet connection on all computers.  Can someone give me a hint on how to get Web services to work?

  Hi sbenzie,

  How your printer is currently connected to the network? Via Ethernet or wireless? What is your current router / network configuration? That shows your printer because it is the IP address? What happens when you try to launch applications?

  Not yet given the information above, here's what I would try.

  I suggest to reconnect the printer to the network by running the Wireless Setup Wizard and attempt to restart the web services. If this is not enough, you may change some DNS settings in printers EWS (built-in web server) to do this, put the IP address in a browser window on your PC.

  This should start the integrated Web server. In SAP, select the network on the network tab, select 'network '.

  Then select "network address" (IP). Do not change the IP configuration at the top. Go down under "DNS address configuration"and select 'Manual DNS server'. " Under manual DNS server, enter (an 8 in each box on the first line) 8.8.8.8 and 8.8.4.4 on the second line. Press the button 'Apply' at the bottom.

  Now try to connect to Web Services again.

• After the program of doggle wireless Vodafone makes a connection to the internet, I get a Freebee screen Awards with a code number on it

  Original title:

  An outdated warning occurs on my computer just after the program of doggle wireless Vodafone makes a connection to the internet and stops everything works until I close. The notice tells me it's Freebee Awards with a code number on it to enter my reward but it is out of date and useless. How can I remove it from my Windows 7 computer.

  Hello

  1. If you connect the dongle from Vodafone to another computer, you still experience the same issue?

  2 have you made any changes to the computer, before the show?

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 in the article to restore your computer to normal startup.

  Method 2:

  Run a virus scan and make sure.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: All data that are infected can only be cleaned by deletion, which means that there is a risk of data loss.

  For more information about Vodafone Rewardz,.

  https://rewardz.Vodafone.co.UK/

• SK2061: The wireless keyboard will not connect when the PC is turned on.

  My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it).  Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.

  The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.

  Hello @JimCar82,

  I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!

  Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• Wireless network adapter cannot connect to the wireless network

  When I start my PC HP TouchSmart it does not recognize my wireless network.  It says wireless network adapter cannot connect to the wireless network and the details said network adapter "Local network connection * 16 ' does not work properly. The strange thing is that if I leave my computer for a few minutes, then restart it twice, it recognizes the network and starts working. Frustrating is that I have to do this everytime I turn on my computer.  It takes at least 10 minutes of starting and restarting my computer before it will recognize my wireless network.   Any help?

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to connect to the Web Services Proxy/unused (a HP 7500 JO)

  Hello

  Here's the situation:

  Previous installer:

  .  I have connected my 7500 for the corporate network (IP = 172... series)

  .  registered the product with ePrintCenter

  .  used a PC under Windows to print (and scan) with the printer

  .  web proxy entry "webproxy.phila.gov".

  .  However, because homeland security rules, I could never work, so I just let it go

  Current situation

  .  has taken the home printer and set up on my home network, i.e.,.

  -using the 192.168.xx.xx series

  -Router broadband Netgear ' G' (1 years) set up at the 192.168.xx.254

  -SSID & encryption assigned

  -printer, the value 192.168.xx.155 (static IP address, the subnet and the gateway assigned as well)

  -My DNS is identical to the bridge and it works fine for all the internet access to this day

  -with the help of a PC and a Macbook Air to print and scan and everything works fine

  .  HOWEVER,.

  -Initially, 'web services' were active (carried over from when I was on the company neetwork?)

  ..  Are looking for, found and downloaded updates

  -When I went to hp.com ePrintCenter he showed the product as 'registered '.

  ..  He would'nt I would like to connect (with a name and a password I had used previously), or create a new account

  ..  I never remember getting an email address of the printer

  ..  and I had never been able to send anything to the printer to print because of my problem of network security

  -Yes, after trying all sorts of things, I:

  ..  I tried to get another email without success

  ..  tried to re - enable web services, but he said I need to 'proxy', and I discovered that he had always "webproxy.phila.gov."

  ..  I have reset the values by default web services and network values

  ..  I put the static IP address return address in (i.e., printer, subnet and gateway (it has nowhere to put in a DNS one))

  ..  printing and scanning to 192.168.xx.155 works fine

  ..  From my iPad AirPrint works very well

  .  BUT, I still can not online and therefore web server, web services are not enabled, therefore not ePrint

  -everytime I try, it says it needs a proxy

  - but I don't have a proxy installed on my internal home network bit

  -Comcast/Xfinity, my ISP, do not use a proxy

  So, I'm dead in the water.  I can't figure out how to get the web services enabled; I do not use a proxy, so I don't know how to go beyond this issue. How to regenerate address of the printer; and so, how do I connect an account on the ePrintCenter (or get them to send me my old account information).  I'm dead in the water and cannot use a feature most of my printer that I desperately want to be put in place and functional.

  Any help would be greatly appreciated!

  Tommy

  Problem solved, but I don't know exactly how I did it. However, I went back in and let the printer assign the IP address. Then I turned the printer off and on again. Last I kept pressing the button "Printer e-mail address", who has repeatedly failed, but then finally went through and print the 'printer' page, I quickly used to connect to the ePrintCenter and put everything in place.
  
  Now it's working.

• Unable to connect to the web proxy/services

  Unable to connect to the web proxy/services used for officejet pro 8600 as well as using verizon fios actiontec router.  I tried wireless and ethernet.  Connectivity seems good.

  Resolved.  Port forwarding blocked by another application of verizonwebcamera problem.

• I can\ to connect to the web server integrated on my D7460?

  Hello

  I had some problems with my Photosmart D7460 printer and resolved (for now) most of them.

  Except that I can't connect to the built-in web server. Also, I do not get a response when I try and ping the printer.

  Giving to think I have problems of network with the exception that I can print to this printer... Well well, from most of the computers on the network, but that's another story.

  I checked what the said road IP address he gave to the printer.

  Any suggestions would be welcome.

  OK, I seem to have solved the problem.

  I'm not sure that bit of material, it was causing the problem but it seems to come form tries to use "WPA & WPA2" parameters (BT Home Hub 3.0) wireless access point.

  Who having spent 'WPA only' I can now ping, print and connect to the web server.

• Install second connection to the web server at DB 10R2 running Apex 3.0.1.00.08

  All,
  
  I'm trying to add a second web server to move a part of the web traffic to another resource. I have a 3.0.1.00.08 instance that runs on the database connected to the web server and I just wanted to add a second connection to the front-end web server.
  
  The second is web server currently running SOA suite so it was logical financial to simply add another call on this web server.
  
  ServerA (existing web server) to connect successfully to the server b (existing database server).
  ServerC (new web server) to be connected on server b.
  
  Directory copied apex and images ServerC ServerA
  
  TNSNAMES. ORA on ServerC located under ORACLE_HOME\NETWORK\ADMIN
  ORCL =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = ServerB.Address)(PORT = 1521))
  )
  (CONNECT_DATA =
  (SID = ORCL)
  (SERVER = DEDICATED)
  )
  )
  
  Server c, I use SQLPLUS to connect to server b using APEX_PUBLIC_USER, correct password, ORCL
  
  Change ORACLE_HOME/Apache/modplsql/conf/dads.conf on ServerC
  
  Alias is ' ORACLE_HTTPSERVER_HOME\Apache\images / '.
  AddType text/xml xbl
  AddType text/x-component htc
  < /plex location >
  Order deny, allow
  Docs PlsqlDocumentPath
  AllowOverride None
  PlsqlErrorStyle DebugStyle
  PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
  PlsqlDatabaseConnectString cn = orcl, cn = oraclecontext NetServiceNameFormat
  PlsqlNLSLanguage AMERICAN_AMERICA. AL32UTF8
  PlsqlAuthenticationMode Basic
  SetHandler pls_handler
  PlsqlDocumentTablename wwv_flow_file_objects$
  PlsqlDatabaseUsername APEX_PUBLIC_USER
  Apex PlsqlDefaultPage
  PlsqlDatabasePassword correct_password
  Allow all the
  < / location >
  
  Restart HTTP_SERVER on ServerC.
  
  I get the error:
  Journal of the database failed
  
  TNS is unable to connect to the destination. Address provided is not a valid TNS or destination is not listening. This error can also occur due to underlying network transport problems.
  
  Ensure that the TNS name in the entry of the DAD for this URL connection string is valid and the listener of the database is running.
  
  ORA-12170: TNS: Connect timeout occurred error-Code: 12170 error TimeStamp: kills, 16 December 2008 20:35:58 GMT
  
  I thought it was weird since it's what worked on the other server and using sqlplus.
  
  I also tried to change the dads.conf file to use the following connection string:
  PlsqlDatabaseConnectString SERVERB:PORT:ORCL ServiceNameFormat
  
  No luck. Why the connection work with SQLPlus and not modplsql? What I am doing wrong? If not, how can I solve this?
  
  Any ideas?
  
  Thank you
  Keith

  Keith:

  Try to use the "SIDFormat" in dads parameter 'PlsqlDatabaseConnectString' instead of 'ServiceNameFormat '.

  CITY

• asked when selecting printer password to connect to the Web - 5530th

  "When I select ' printer connect to the Web ' the first thing I get is a problem with the sites security certificate message.  Then a message "i.e. explorer.exe 10.0.0.5 server is asking for your user name and password."  The server indicates that it is from admin. "What password he seeks.  My administrator password does not work.  Any ideas would be most appreciated Win8.1 64-bit, Toshiba laptop

  There are two ways we can know who is responsible for the error, restore the default settings of the printer network, or try a different web browser.

  It seems to me that the built-in Web server opens in Internet Explorer. In order to have the Embedded Web Sever open in another browser, you open Firefox, Google Chrome, etc. On the printer, press the wireless icon and it will show the IP address.

  In the other open browser, type printers I.P address in the address bar. It should load the page you had before with the tabs at the top. See if the password is always asked for.

  If the above fails, the menu on the front panel of the printer, press the wireless icon, and then default network. Connect the printer to your network and then try to load the built-in Web server (be it office or enter the I.P icon).

  Let me know the results.

• mylaptop stops as soon as I connect to the web

  I noticed that my laptop starting and wondered why it was closed. I waited for windows load, signed at and shortly after he began to close again. After an investigation, I noticed that it happens when it connects to the web.lan or wifi have the same results.if that I disable my sound connections fine until I try to connect then it stops and restarts. It's the same thing in safe mode. I did a factory reinstall but nothing seems to help.any ideas?

  Hello

  According to the description, it seems that you are facing problems with the Internet connection, the computer automatically shuts. I'll be happy to help you in this problem.

  -Type of connection that you are using? (Wired or wireless)

  -Did you do changes on the computer before this problem?

  Method 1: I suggest you to follow the steps from the link and check if the problem persists.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-za/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2: If the problem persists, I recommend the steps and check if that helps.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-za/Windows7/fix-network-adapter-problems

  For reference:

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-za/Windows7/wireless-networking-frequently-asked-questions

  I hope this helps.