Want to M4 1015-dx: my laptop is supported by a 5g connection? Want to m4 1015-dx

I wonder if my laptop is able to connect to a network of 5g as can other devices in my house, but my laptop can't find the network. The wireless driver is Ralink RT5390R 802.11bgn.

If she can't stand 5g, then are there maps to obtain a driver that supports 5 g?

EstebanL wrote:

.... The wireless driver is Ralink RT5390R 802.11bgn. If she can't stand 5g, then are there maps to obtain a driver that supports 5 g?

Hello

With this card, no, it only supports 2.4 GHz. Please do not think that the replacement of the wireless card on this laptop even with a map on the Manual:

http://h10032.www1.HP.com/CTG/manual/c03600883.PDF

Kind regards.

Tags: Notebooks

Similar Questions

  • This laptop will support an ocz vertex 3 series VTX3-25SAT3 - 240 G 240 GB SSD, SATA III 6 GB/s?

    HP Pavilion DV7-4080US, Windows 7, 64-bit

    I want to replace the existing 500 GB "d" (5400 RPM) drive with an OCZ 240 GB drive SSD SATA III and must make sure that this laptop will support a SATA III SSD drive?

    I am not concerned about the start time that you want to use the SSD for video editing, so I don't anticipate using the SSD instead of the c"" drive.

    Thanks for your help.

    Hello

    Well, this will speed up the startup time of your machine a lot but for editing video may not help much. In any case the SATA III (or 3) is backward compatible with SATA II (or 2) and SATA I (or 1). You're probably on the price/cost. A little program called PC Wizard will tell you the speed of the disk on your computer controller:

    You can download it from the following link:

    http://www.CPUID.com/softwares/PC-Wizard/versions-history.html

    Kind regards.

  • my laptop says that it is not connected to the internet

    Original title: network programs network networking Internet Web site Site Web Web Site URL

    Can someone help me; my laptop says that it is not connected to the internet, I can't understand the wireless problem but my daughter's laptop connects fine.
    It brought me to this site in question--but is not on the internet? So why he says I am not connected? What is happening lately, it worked fine before?

    Hi Lgbeerle,

    1. What is the operating system installed on your computer?

    2 have you made changes to your computer recently?

    3. where are you getting this error?

    You can access this forum on the Internet. To resolve this problem, I suggest you follow the link and check if it helps.

    Windows wireless and wired network connection problems

    I hope this helps.

  • I'm trying to set up an ad - hoc network if I can use my laptop to share our wireless internet connection.

    I'm trying to set up an ad - hoc network if I can use my laptop to share our wireless internet connection. first time I tried, I managed to do this successfully. When I was through, I deleted the network connection. now, when I try the implementation of another, I get a "windows could not set up * network name." No matter what I change, the settings of the firewall market, I can't work. My laptop is connected to the internet through the LAN.

    I am running windows vista Home premium. Computer is Hp Pavilion dv6
    original title: try to set up an ad-hoc connection

    Hello

    Follow the suggestions from the link and check if it helps:

    Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to" "

    http://support.Microsoft.com/kb/946481

    Reference: Set up a computer-to-computer (ad hoc) network

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-computer-to-computer-ad-hoc-network

    Ad-hoc networking

    http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

  • HP officejet 100: printer hp officejet 100 laptop will support Windows CE?

    I'm working on Windows CE project.  I need to print with hp officejet 100 via Bluetooth or usb. I don't know if the printer hp officejet 100 laptop will support Windows CE or not. Can someone clarify for me please.

    Hi SureshR,

    This OfficeJet 100 was not designed to work with Windows CE, as such. The specifications include Windows XP, Vista and 7.

    You you can try the different drivers to see if none of them work. Also check for the built-in drivers in Windows CE. The specifications page points to www.westtek.com for Windows Mobile printing.

    Good luck

  • Laptop with Windows 7 does not connect with the router

    (Not this computer) laptop with Windows 7 does not connect with the web.  Box of message says - "t8ExtPEx.dll is missing". Any help is appreciated.

    (Not this computer) laptop with Windows 7 does not connect with the web.  Box of message says - "t8ExtPEx.dll is missing". Any help is appreciated.

    Hi Roger,

    We would like to learn more about the issue. You get this message when you launch your Internet Explorer, or when you work with all Office applications?

    You can also try the solution posted by Redcar92 on this link: 8ExtPEx.dll is missing.

    Let us know how it goes.

  • Laptop says that I am not connected to the internet when in fact I am. The LAN and WiFi

    I recently acquired a laptop HP ProBook 4540 s. It is currently running Windows 7 Pro 64 bit.

    Although I seem to have full connectivity with internet through two LAN and WiFi, the icon on the taskbar always has a red
    'X' through it.

    When I go to the network sharing Center, there is no listed active networks and yet it shows fully connected at the top of the page.

    Because there is no active networks listed I can't change of 'Private' to 'Home' or 'Office '.

    Also, I do not believe that the computer running automatic 'windows updates' because he thinks that there is no internet connectivity.

    It can search and identify the 'local' WiFi routers and I can connect to them with ease, but the laptop still says: I am not connected.

    I tried a lot of things. New drivers, uninstaller and reinstall, Hard reset and many other suggestions I found on the internet without success.

    I hope that someone out there has seen this particular problem.

    Thank you

    Hello Rick,

    Thanks for posting your question on the Microsoft community.

    Thank you for details on the question and your efforts to resolve.

    This problem may occur because of corrupted network driver or incorrect network settings.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run the network troubleshooting and check.
    Reference:
    Using the troubleshooter from network in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Convenience store network in Windows 7 provides a way for anyone diagnose and fix network problems. The problem may be caused by a number of problems with your computer, the web server or the network between your computer and the web server.

    If this does not help, use method 2.

    Method 2:
    Reset TCP/IP and check the issue.
    Refer to this article:
    How to reset TCP/IP using the NetShell utility
    https://support.Microsoft.com/en-us/KB/299357

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • A Sony VAIO Intel Core i3 laptop will support Photoshop CS6?

    I would buy Photoshop CS6 and install on my laptop.  Sony VAIO Intel Core i3 laptop will support Photoshop CS6?

    Yes, photosphop will be installed.

    For system requirement information photoshop cs6 refers to the link below:

    http://www.Adobe.com/products/Photoshop/tech-specs.edu.html

    Sarika

  • 15 t: new laptop HP 15 t do not connect or stay connected to Wifi

    I got my new laptop for about three weeks and everything worked perfectly on it. I downloaded 1/20th of what I had on my old HP laptop. All of a sudden, we arrived at the cottage a day and my laptop wouldn't stay is no longer connected to wifi. I turned my laptop on / off power several times and nothing is fixing the issue. Thinking it was the wifi connection, I deleted it only to have it not even be able to connect in this respect more. This laptop is brand new and I'd hate to send it back because I am me such a lot on it and everything I wanted came with this laptop.

    If I can't find the solution, I'll be forced to send it back and get a different brand.

    Is there someone who is having the same problems as me?

    Thank you

    Jill

    Hello @Jillybean124,

    Welcome to the HP Forums! I read your post that your laptop HP 15 t is having a wireless connection issues and I wanted to join you.

    Here is a list of steps that solve common problems with wireless connectivity.

    First of all, we have a step by step guide to guide you through the process of diagnosis here:
    Troubleshooting your wireless network and Internet access

    A second option is to try the following steps:
    Powercycle the network:
    1. turn off your laptop.
    2. unplug the power to your router.
    3. disconnect the power to your modem.
    4. wait at least 45 seconds.
    5 reconnect the modem and wait for it to come back online.
    6 plug in the router and wait for it to come back online.
    7. turn on your laptop and test your connection.

    Turn off the power to the adapter:
    1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
    2. expand the network adapters.
    3. right click on the Ethernet adapter / wireless, and then click Properties.
    4. click on the power management tab.
    5 remove the check mark next to allow the computer to turn off this device to save power.
    6. click on OK.
    7 test cycle.

    Reset the TCP/IP settings on your PC:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
    4 restart your PC and test.

    It can also help to reset the winsock catalog:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
    4 restart your PC and test.

    Reinstall the NIC drivers:
    1. download the drivers from here , but do not run them again.
    2. go to your Start menu/screen and type Device Manager.
    3. expand network adapters.
    4. right click on the wireless adapter and choose uninstall.
    5 install the drivers downloaded in step 1.
    6. restart your PC and test.

    Test an ethernet connection:
    Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

    Test another connection:
    Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

    If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.

    Source

    Please let me know how it goes. If this helps you to find a solution, please click on the button accept as Solution down below in this message.

    Thank you!

  • Is it my laptop bios support UEFI...? G4-1303au PAVILION

    PRODUCT NAME: G4-1303au PAVILION

    OPERATING SYSTEM: WINDOWS 7 32-BIT

    Fact my g4-1303au pavilion laptop support uefi bios... I want to install win 8 in uefi mode... If not... When HP will modernize my legacy to the UEFI bios bios...

    I can finally see the images. Do you have access to BIOS and click on Security options, if they exist?

    Your images do not show that. InSyde BIOSes are normally sections of Configuration, security and startup options.

    Power button, immediately press the ESC key a few times to display the Start menu and then select F10 for BIOS. F9 is for boot options. Also, there is a screen of Boot options in the BIOS.

    @ajmalthesmart

  • How to share files and printers between windows xp desktop that is connected to a wireless router with a laptop running windows 7. printer is connected to the desktop computer

    Hi all.  I normally wouldn't have a problem with that, but I must be missing something.  I want to create a home network or small business between my desktop running windows xp pro sp3 and my laptop running windows 7 Home premium.  I want to share files and printers.  My desktop with windows xp computer is connected to a wireless router.  The printer is connected to my desktop as well.  My laptop is wireless with the wireless router.  I tried everything I can think of to get these two devices to the network.  If anyone can help.  Don't forget, my printer is connected to my desktop with windows xp and is connected to my wireless router which is connected to my cable modem.  Internet works fine.  the laptop with windows 7's wireless and internet works fine.  just impossible to get the two see each other or share what anyone.  Thank you.

    With respect to the sharing of printer (s), microsoft has a utility called 'Print Migrator'

    Download & install, create copy, send a copy to the other pc to share its use.

  • How to set the laptop to get a wireless Internet connection?

    Original title: wireless router?

    Hello, I have a desktop PC at high speed cable Internet, it works perfectly... my mom wants a laptop, but she wants wireless, I bought a linksys wireless router, now how set the laptop to get internet? I can't do this... also I don't know what kind of im internet network under wpa, wpa2, I know as much as I know, is that it is broadband... Iplease help me get programmed therouter please?

    Hi Corey,.

    We can refer to the following articles and check if it helps.

    Setting up a wireless network

    How to connect to a wireless network in Windows Vista

    Hope this information is useful.

  • Computer DV7-1825dx laptop screen turns off at least connected to the HDMI

    I have a Pavilion dv7-1825dx running Windows Vista Home Premium 64-bit.  The other day, I simply closed the laptop into hibernation.  At the time, it was only connected to a printer and a wireless mouse.  The next day, I opened the laptop and it turned on but the screen stays off.  I shut down the computer by holding the power button and then turned back on.  The screen appeared and asked me if I wanted to start Windows normally.  Then, I got the loading screen for Windows.  As soon as he was done loading, the screen turns off and the chime sounded for the login screen.  I repeated again than having the same problem.  I typed my password, but the screen stays off.  Because I often hang my computer to our TV via HDMI, I thought I would try it, and that is, both screens lit.  I then disconnected the HDMI cable and the computer screen exploded again.  Plugged into the HDMI and activated.  I went into options for NVIDIA and noticed that there is an analog display with the screen of television and laptop (up to three screens on the list).  I restarted in safe mode, and the screen of the laptop works great.

    Any ideas on how to solve this problem?  That I can not connect my laptop to the TV whenever I want to use.

    Thank you advance!

    http://www.nvidia.com/object/notebook-Win7-WinVista-64bit-285.62-WHQL-driver.html

    Save the driver on the desktop and install it from there, not in a temporary folder.

    Create a Windows restore point before starting.

    During the installation of the new driver, click on "Custom" and there will be a link to uninstall the old drivers and all of your current settings, this before you install the new driver.

  • window appears on the extended screen, but the screen isn't there anymore so can't get to the window (2nd screen on laptop is only when it is connected to the desktop)

    Hi... interesting problem. I use my laptop computer on a desk with a second screen and moving.

    The last time I was using my laptop on the desk, I brought an application (Quicken) on the second screen and now when I start it up it displays on-screen extended even if I use the standalone laptop. I can't demand because it appears in the second screen and I can't get it back to the main screen. I even rebooted and it seems to 'remember' where is was the last time.

    Any thoughts on how to get it back (I know I can reconnect the second screen and move it back, but what about the time when I'm not near my office and want to access an application that was last used on the extended screen.)

    Argh...

    Thanks for your thoughts, I assume that there is a simple key sequence to make it visible on the main screen once I can't find it anywhere.

    Kind regards
    Lex Gitter

    Very late reply, I have the same problem and I solve it hovering over the window you want in the taskbar when the preview window displays a right-click on it.  Select optimize.  The window will appear on your screen.  No, you can enter the window and its size down, it stays on the current view

  • How to configure NAT for Hyper-V on laptop with wifi, wired and vpn connectivity

    Me, as I suspect a lot of people, I have a laptop with WiFi connection, cable connection and VPN connection (Cisco AnyConnect), which

    also uses a virtual adapter (activated when active). I searched for some time a way to be able to move to

    Hyper-V in VirtualBox. Blocker full for me is the need for a lot of my virtual machines to be able to connect to the

    Internet through 'the connection active' in the way that VirtualBox and VMWare Workstation/Player through their NAT feature.

    I'm not a networking wait, but after looking around, can't seem to find something that is simple enough for me to configure,

    with a minimum of resources, which allows me to connect a Hyper-V virtual network via a simple NAT device adapter

    all three potential network connections - most seem to not assume that one connection out of the machine, which of course does not

    me what I want.

    Three questions:

    1. is there a Windows application available that an adapter (like loopback) internal which acts as a real NAT device to one of the surfaces

    external access via the active network connections and through the Windows Firewall and any other antivirus, components etc. for

    the road to (i.e. behaves like a "normal app" inside Windows for internet access)? It would be the best option, because it would be

    "always there" when I run virtual machines

    2. display of my lack of knowledge around this feature, don't RRAS (and I know that this is not an option "minimum contact") allow you to

    Connect an internal network adapter to several external network adapters?

    3. on the Linux/OpenBSD various base/NAT routers, are everything that allow several external adapters and who are

    relatively easy to set up (by an independent expert of the network)?

    Really, we could do with this feature for Hyper-V on the desktop, but willing to work around him, if there is a way to at least the

    use virtual machines, once it is easy to install.

    Hello

    The question is more suited in the TechNet forums. So I would say you mention the link and send the request in this forum for better support.

    http://social.technet.Microsoft.com/forums/en-us/w8itpronetworking/threads

    For any information related to Windows, feel free to get back to us. We will be happy to help you.

Maybe you are looking for

  • Satellite P300D - 12L: Enter key did not work in games like FIFA, NFS

    Hi all! I own a laptop Tshiba Satellite P300D - 12 L.In the last month, I got Win XP 32-bit installed and it became a strange problem: the Enter key did not work in games like FIFA, NFS, but in others, and in the office, it worked normal applications

  • A different ways of the spreadsheet file format

    Is it possible to have several methods for writing custom Spreadhseet formatting? As if I had a picture I want to have columns specific to the format in different ways. Or can you format only the entire file spreadhseet go? Thank you Konrad

  • How to start the print spooler stopped?

    My system: Microsoft Windows XP Home Edition, XP SP 3 My printer: Epson Stylus PHOTO R320. When I try to set the margins of a page from WordPad is the first message: ' before you can perform tasks related to printer such as layout or print a document

  • Black screen when scanning with Officejet J6480

    Printer HP Officejet J6480 all-in-one, Windows 7 64-bit, When I scan everything I get is a black screen. I ran the scan doctor and the report said everthing works properly. I don't get anything no matter how I run the scan. Can anyone help?

  • The computer folder is empty after the use of group policy for card readers

    Hello I used the Windows Server 2008 Group Policy to create network drive mappings. This works for most, but on some accounts, it caused the computer folder is empty. For example, the folder of the computer used to have my C drive, my drive DVDROM, m