Want to power 5530

Similar Questions

• OfficeJet 4620 wants to power down, but won't start button / stop

  Most of the time the printer/scanner works fine, but sometimes it "sulking" and wants the power off, but won't the power button.

  I have a switch in the extension cord to the electric line which I use in these moments there (better than pulling the plug?).

  When the current is applied again the printer usually goes back to work.

  Sometimes he blames me for not using the power button - I really try that and generally goes back to work when I promise to do better in the future.

  Yet at other times, he wants the power cut off, even once.

  The printer is connected to the router via wifi.  Two computers are connected by ethernet to the router using Windows XP or Linux (via hplip).  One or more laptops can be connected to the router using Win7 or Linux (via hplip) wifi.

  (Really) thanks for your help and suggestions, but I think I've reached my limits.  I followed your link and entered the information produced.  The result is that the warranty expired 11 days ago.  It's an interesting period of guarantee; ten days of 27 months.  I bought September 15, nearly 11 months ago.

• Want J020dx: Power cord for HP Envy 17 "J020DX question, urgent pls!

  Hi all

  I have a HP envy 17 "J020dx, and now I'm in Australia, where I couldn't use the previous/power cord, and the problem is I could not find the adapter Plug and will be stuck in this situation for a while.

  I managed to find another power cord that fits into my diet, but said cord 2. 5A / 250v while the previous cord was 7 a/125 v, Australia 240V voltage.

  Sorry, I could not remember the requirement of entry written on my power adater ampere, but the voltage is 100-240v.

  It is, it will work cord aussie safely? Thank you very much!

  Hello

  Your question gave me a chance to look at my laptop at home now. %0% of them use 2. 5A - 240V cords others use a 5, 7. 5a and 10 to the cords. I also turned my HP Envy 17 t loan charger and requires 1.5 a entry. What I see: 2.5 a input cord 1. 5A charger is ok.

  Kind regards.

• Envy dv7: want to power on password 55361039 d7

  I forgot to turn on password. Get the code 55361039?

  Hello

  Enter 40049019

  Kind regards

  DP - K

• Equium A300D-13 x not power

  Hi all

  First post here need big help style. I got the laptop a little more a year now he got year last for Christmas, and all of a sudden, he decided that he did not want to power far more.

  So, Ive tried to take out the battery and put the cable in and holding down the power button / stop Ive tried just battery alone and pressing the button no chance.

  Ive even bought a new loading for her cables still no luck. Can someone help me? See Im a photographer independent and all my work is on laptop and its one of my main tools

  See you soon

  Hello

  This problem sounds like a hardware malfunction and I think you have already done everything that you can do (remove battery, etc.). For me, it sounds like a motherboard problem, but your laptop should be checked by a technician of portable because they can make an accurate diagnosis.

  You can find a list of all FSA here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  Good luck! :)

• HP envy 5530: impossible to activate scan of the computer!

  I have a macbook air and I wanted my hp 5530 for a few years and it has worked very well. Then I was unable to scan directly to my macbook, so I followed the instructions of troubleshooting - uninstalled the hp software and then re-installed. After the 3rd re - install, scan to computer worked for a day and now I can't do it again!

  I can't check the box 'Enable the scan of the computer' in the hp utility - WHY? Can someone help me please no copy and paste the instructions of troubleshooting, I read the already. What do I have to uninstall and reinstall again?

  Hello
  The HP scanning application is not compatible with Sierra, so you may experience problems.
  Remove the HP scanning by moving it to the trash, then empty the trash.
  
  Instead install HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.
  
  Kind regards
  Shlomi

• Satellite L650 does not start sometimes the Power button

  Sometimes when I press the button works / starting the fan of laptop and the laptop does not start.
  However when I press once again lights up.
  This does not depend on how long you keep holding the power button so that it starts.
  Anyone facing this problem.

  Thank you.

  What exactly do you mean by does not start?
  Is this means that the laptop has been closed or has been set to standby or hibernation mode?

  Are you able to see the Toshiba start screen when you switch on the device?
  If fans hang on this means that the laptop has been put under tension, and then you the OS should start to initialize.

  PS: usually it s no matter how long the power button could be pressed. Briefly press (1 sec) should turn on the laptop.
  But if you do not want to power OFF using the Notepad works / stop, then you will need to tap more long time 4 sec long but it is not recommended that this reset should be made only if the OS hang

• Update on power supply for Hp p7 - 1370 t.

  Hi, I'm going to update my geforce gt 620 to a geforce gt 640 GDDR5 OEM, but my PSU is only 300w, I want a power supply 400w or more just to be sure, what PSU guys would you recommend for my computer.

  Thank you

  Hello

  The CorsairCX500, or CX600 are excellent choices for your PC. You will have a lot of power for future growth.

  If you do not plan to replace the video card with a better card in the future the Corsair CX430would be a good choice.

  ' HP ' how-to ' articles should be useful.

  Consult this publication documentfor more information.

  You can watch the EVGA GTX 650.  The price of need, I can say is much cheaper and the performance of the card are the same.

• Choose the right power supply for hp P6180t

  Hi I'm going to buy a new power supply soon for my HP pavilion p6180t desktop computer and I started a 300w to the corsair cx750 power level. I also want to get a new graphics card soon something in the mid-range. I was wondering if this power supply is the right choice, or if its too much for my computer because I read in another forum that you do not want a power supply with a lot more power you will actually need. For a gtx 660, the minimum is 600w I think so I wanted to just make sure that the power supply is the right choice for my computer. Thank you

  In fact, I think that the minimum for a gtx660 is 450w. I think a 750w for this computer is excessive. A 500w would be a lot. But if you buy one with too much power is just a waste of money it actually will not cause a problem. Like putting gasoline in an engine that doesn't need only regular.

• Definition of idleness/inactivity in power options

  I use the AV scan Scheduler integrated AV Avast to organize scans from 05:00.  But they seem to only start when I wake the computer from sleep mode, even if the analysis is set to wake up the laptop at 05:00.  The solution on the forum users is to analyze during screen saver.  However, I want to power options as the machine goes to sleep after 15 minutes.  Pointing the pointer over the field 15 minutes specification shows that sleep comes after 15 minutes of * idle *.  However, when I search help for power options, the explanation is that intelligence comes after 15 minutes of * idle *.  To run, they mean the same thing, but I wonder if this inactivity/idle is defined in a way that the Avast scan activity can continue beyond the leadup 15 minutes in standby mode.  It boils down to how XP idleness/inactivity is set.  If a scan process is 25 to 45% CPU consumption, but there is no user interaction, considered this idleness?  If so, Eve will kick in well before the analysis ends.

  Thank you.

  FrankyMacky salvation,

  If Avast behaves like the Task Scheduler in terms of recognition when the computer is idle or not this article can help to explain how of inactivity is defined by Windows:

  http://msdn.Microsoft.com/en-us/library/aa383561 (v = vs. 85) .aspx

  I recommend contacting Avast to check the functioning of their program with Windows when the computer is idle or not.

  http://www.avast.com/support

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer

• Update on power supply for Dell Optiplex Mini Tower 3020

  Can you suggest me a power supply that compatible with my Dell pc? The default POWER supply has only 290W. I want a power supply about 500-550W and compatible motherboard Optiplex 3020 and fit the case.

  The power supply in the TOWER can be updated with an adapter.

  Dell OptiPlex 3020 main PSU to power 24 pin cable adapter 8 pin (30cm)

  Suitable for Dell OptiPlex 3020 / 7020 / 9020 / T1700

  http://www.moddiy.com/products/Dell-OptiPlex-3020-PSU-main-power-24%252dPin-to-8%252dPin-adapter-cable-%2830cm%29.html

• Cisco 4510R + E power redundancy without PoE

  I'm picking a diet for a WS-C4510R + E chassis with eight line cards WS - X 4748-RJ45-E (no PoE) and two supervisors 7-E WS - X 45 - Sup. The Cisco Power Calculator says I'm good to go with 'Handset 1400 Watt - Data Only' (PWR-C45-1400AC) with the participation of 200-240 VAC, but I wonder about the redundancy.

  "Handset" means that I have to run both of them at the same time to supply the fully loaded chassis? Or I am able to do with just one?

  HI -.

  According to your specifications, the calculator indicates that you should provide about 1800W chassis to power all line cards.  Since the 1400W P/S is not sufficient in itself, you then run 2 x 1400 in handset mode.  If you wanted the power redundancy, then you have to meet food 2800W (PWR-C45-2800ACV). Fixed: out redundant data would require the P/S 6000W. (I reread the technical and calculating power plug).

  4500th Datasheet

  PSC

• TOSHIBA Power Saver software is turn off the optical disc drive, and I'm unable to re - turn on the power.

  Original title:

  Aloha!

  I have a Toshiba Qosmio x 775-3dv78 running Windows 7 Home Premium x 64.
  Similar to another old post here, I have an intermittent problem where the Toshiba Power Saver software is off the ODD (a Matshita UJ240EF - BD - RE) and I am unable to turn on the power.  To put the ODD back on, it's a matter of restarting (sometimes several times) until the STRANGE somehow turns on.
  Sometimes, when I do a hot or cold boot, a window opens asking me if I want Toshiba Power Saving technology to turn ON the ODD.
  I click 'Yes', but the drive remains switched off.
  I also try to use function - same key controls... The STRANGE remains turned off.
  Here are the "best":
  As described in the former post office, inside the Windows power settings, there is a slot layout titled "TOSHIBA Power Saver Settings v8.9.9.64".
  In this context, normally there is ONLY a framework for 'cooling method.  BUT only when the ODD is disabled, a second parameter appears to "Optical Drive Power".
  Change that on ONE for battery and plugged in fact NONE no difference... The STRANGE remains OFF!
  Toshiba support is of no help.  Their answer to this problem is to run a 'Mr Fixit' which I discovered just unrecognized devices and then removes the upper and lower filters for the reader.  This "difficulty" might work from time to time... when it does, the ODD is somehow transformed into a 'removable' instead of one device ATA device.
  But then in a few days, the STRANGE turns off again.
  Something different maybe notable, I found after that I continued services and the related process, programs is that the version number on the Toshiba modules show "8.9.6" - not the "8.9.9.64" in the window Power Options.
  And before you ask (LOL!) what's happening on a soft reinstallation of the operating system by the media of recovery Toshiba with all Windows 7 updates applied.
  While I'm waiting for a possible response, I'll do the following:
  Uninstall and reinstall all THE software Toshiba provided duty with the STRANGE (energy saving, combustion, players, etc.)
  I will also shoot material part and make sure that the STRANGE is well inserted in the connector (IDE?) and that the connector is firmly attached to the motherboard.
  IF who does things, I'll update this message and inform you all.
  Otherwise, any ideas would be GREATLY appreciated!
  Mahalo!

  Hello

  Method 1:

  Run the electrical troubleshooting utility and check.

  Open the troubleshooter of power

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2:

  I suggest you to change the power settings and check.

  a. click the Start button, type Power Options in the search field and then click on Power Options in the list of results.

  b. click on Change Plan settings for power management already select.

  c. other click on change advanced power settings

  d. expand TOSHIBA Power Saver Settings Vxxxxx and change the optical drive power managementsettings.

• replacement for the power button cable / stop, power LED and HDD LED

  Need to find cables to replace the header 9 pin on the switch / stop, power led and HDD LED indicator.  It is a PC HP Pavilion Media Center m8530f.

  Additional details - no one A High School HE thought that the switch was bad on this PC, so they tried to replace it, but ended up damaging the cables.  The real problem was a power supply dead, so I ordered a new, but now I need to fix this as the person IT damaged the power button, power LED and HARD drive cables.

  Here is a link to your m8530f on HP Part Surfer. I think the part you want is "power switch cable assembly (Black Canyon), part number 5070-2940. It looks like it is available, but you can always call HP and ask.

  Frank

• HP Pavilion 500-214: upgrade HP Pavilion 500-214 Office for games

  Hello

  Thanks for the reading/helping first. So, I want to upgrade my home pc to do some games. Games I want to play are the parameters of quality, World of Tanks with stuff on HD and Skyrim high/Ultra Total War Attila. In General, I want to run these games at 35 + FPS with graphics turned up a little. PC specifications are here.

  Right now the integrated card just works to run in min settings for these games. I want to upgrade this pc if I can instead of going out of my way to build a new one from scratch. I bought this PC for school a few years back, want to keep around him.

  I looked in some graphics cards to upgrade the PC but I'm not sure what power supply I would need to buy to replace the old 300 Watt one. Here are some graphics cards I did research and plans. Could you tell me if the graphics card space, what a good diet would be (should be), and if I need all the things more (like cable).

  I don't expect expirence game extremely high-end, but I know not what graphics card to buy will be much better then the one built-in. I have a budget of $300.

  GTX 750 Ti

  Here

  Read a lot of good reviews on this little guy. I know his date but I read that it goes well with home systems like that because of his use of low power. I'm lead to believe that I wouldn't need to touch the PSU at all. It also probably would be. It is also more affordable and does not need $ 300 budget. However, I don't think he'd go Attila to quality with 35 + fps.

  EVGA GTX 960 + Rosewill Valens 500W

  GC: here

  PSU: here

  This seems to be a great leap forward of the GTX 750 Ti and its certainly within my budget. Research says that it would take around 400W PSU to run, so upgrade is necessary here. These PSU and GC will be in my system? Let me know please.

  XFX R9 280 X + XFX Core Edition PRO850W

  GC: here

  PSU: here

  This combo is probably the best that I can afford right now. Research, the 280 X should easily meet my graphic needs. However, energy consumption is larger then the other two. People have recommended a 500W one, but the specifications of State a 850W recommended. Which is correct? These PSU and GC will be in my system? Let me know please.

  Any help would be greatly appreciated. Thank you very much.

  Hello

  first of all, on the 750ti, it's a beast (by my definition)... ive played witcher 3 and ca unit maximum heating 35 + fps with it... enough said...

  and since you say you don't need a "game of very high-end expirence", it would be pretty stupid move on foregoing the 750ti... (and yes it's not dated... it was only released last year)

  as for the PSU, don't look beyond a corsair or antec... a Corsair 650 w modular is my recommendation, complete and final...

  Ive told people for the last 5 years, to avoid amd... it produces much more heat and consumes much more power than their counterparts nvidia... unless you have a master very ventilated cooler or zebronics case and are willing to pay a salty electricity bill, avoid the 280 x.. He 960 is better than that

  don't worry about the establishment... the 750ti is a map of 5.7 inches (unless you go for the MSI TF one)... so its nice little... the other two are 10 inches + (unless you get a small form factor 960)...

  what I see, you don't need something more than the 750ti... If you want more power then the 960... but please avoid the 280 x.. Hat you'll now cost you'll eventually spend (more) on the invoices, purchase thermal pasta, and whatnot...

  (PS-atilla is a badly optimized game... even an sli 980 struggled to run on ultra... so don't think you will get ultra with what you listed... but a ti 750 will be good in high twisted)

  Hope this helps

  This answer solve your message or question?

  If Yes, then share the good news! Inform others that this response was helpful in accepting this solution.
  You can also show your appreciation by giving congratulations.