Want to restore DVD Windows 8 fails

Similar Questions

• I want to restore my windows

  my computer was stolen and I com back, but my version of windows vesta anli on hard drive and I have'nt recovery cd and the thief destory my serial number what can I do in this proplem? I have a lot of important file in it I must restore.

  If you have hadanother installed operating system, you normally have wiped your hard drive clean during the process.

  You can try this program:

  http://www.SnapFiles.com/get/Recuva.html

  Recuva is a file undeletion tool that allows you to analyze your hard drives or media cards for files that have been deleted or formatted. It presents you a list of files that have been found, as well as an assessment of their potential for recovery, a preview option, and a hex viewer to inspect the content. You can limit your search to files of a certain type (e.g. images, audio etc.) and choose between a quick and a thorough analysis approach. The program also includes a secure deletion option that allows you to permanently delete files that were found while parsing, to avoid any future recoveries.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Find a windows.old folder, because we don't know exactly how you have installed.

  http://support.Microsoft.com/kb/932912

  How to recover files from an earlier version of Windows in Windows Vista

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If none of the above solves your problem, try data recovery companies.

  Be warned: they are $$$

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery media:

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  See you soon.

  Mick Murphy - Microsoft partner

• System Restore DVD Vista vs Windows 7

  I'm new here and I apologize if this has been asked before.  I looked around and tried to search but can't find my answer.

  I just reveived my new HP Pavilion dv7t last night.  Notebook Essentials booklet says to create a set of DVD system restore, but This can only be done once.  I am in the process to register for the upgrade to Windows 7 snce is expected within a week.

  Should I go ahead and create the restore DVD system with the Vista operating system, and if I do I then will be able to create another System Restore DVD for Windows 7?

  I want to assure you that I have a restore of the system based on both operating systems, where I need to go back to Vista, but still have a system for Windows 7 restore, if it proves to be stable and I like the OS.

  I hope this makes sense...

  Make your Vista recovery DVD. Two reasons...

  1. you will not be able to do a cover of 7 Win set, (unless, of course, HP offers a magic here).

  2. If you install Win 7 and you need to reinstall it later, you will have to start with the Vista installation and repeat the upgrade process (unless HP upgrade version works differently from the retail... version did not get a response on this one here).

  Of course, you can always use an application of imaging to make an image of the newly installed Win 7 to use in the case of a reinstall. Acronis True Image or Macrium Reflect are 2 choices. Macrium is my preference.

• I have a laptop of logic that is running windows vista, I want to restore it original configuration

  I have a laptop running windows vista logiq, I would like to restore it to factory settings, I can't find if I had any disk when I wore this last year, it contains errors which I can't fix so thought I would restore it back to original settins, can anyone help

  Hi shelaneboon,

  What exactly is the problem that you are facing?

  If you want to restore your laptop to factory settings Windows Vista, then you need to contact the manufacturer of the computer for more support.

  Note: If you you restore the computer back to the factory settings, you will lose all data. Back up your data before you restore your computer to factory settings.

• I want to restore my hp desktop computer that is running windows vista edition Home premium

  I want to restore my hp desktop computer that is running windows vista edition Home premium, but I don't have the cd and when I try it files through the windows there not a correct restore date.  can someone help me?

  Hello

  You're confused system recovery and system restore.

  System Restore makes the settings from your computer to an earlier date; It will not reinstall the operating system.

  System recovery reinstalls the operating system how much you bought your machine; as for the new State.

  "Recover Windows Vista operating system using HP Recovery"

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  You can reinstall by the HP Recovery Manager if your computer is still running or by pressing F11 at startup.

  You can also make your own recovery discs.

  All these information are the included HP link.

  For the HP Recovery Manager.

  The backup and HP Recovery Manager on HP Pavilion and Compaq Presario computers is a versatile, easy to use application that allows you to:
  • Create a set of recovery disks operating system

  • Recover the PC to the State of initial operation critical system failure

  • Use the extra discs that are available with recovery disks

  • Backup and restore important files

  • Reinstall the applications or specific drivers

  • Restore the computer to an earlier point in time

  • Check the status of the PC and installed files

  • Do not delete the HP recovery Partition

  See you soon.

• I want to do "System Restore" in Windows Vista. But I can't change the restore point

  I want to do "System Restore" in Windows Vista. But I can't change the restore point. How to configure manual restore point? Can I enter a date I want to restore? I tried, but it did not work.

  Original title: in Windows vista system restore

  Hello

  Either the system restore point is already created for an earlier date, or is not available.

  You cannot create a restore today Point to return to yesterday.

  You can create a restore today Point to use in the future.

  Here's how to use the Vista system restore:

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.

• CREATE DVD WINDOWS STOPPED WORKING / CAN'T READ DOWNLOADED VIDEOS, I BURNED A DVD ON THIS PIECE OF JUNK AND NEVER COULD BURN AGAIN, IS WHY MICROSOFT DO NOT WANT TO HELP ME WITH THIS COMPUTER

  I DON'T KNOW MUCH ABOUT COMPUTERS I KNOW JUST THE STORE I BOUGHT THIS COMPUTER FROM IS OUT OF BUS. JUST LIKE ME I'M NO LONGER WORKS I WANT JUST THIS DVD PROBLEM SOLVED

  Hello
   
  The "WINDOWS DVD MAKER has STOPPED working" is a common error, and there are several causes for this.
   
  We recommend that you check the event log to find out what is causing the problem and view details of return.
  1. open Event Viewer by clicking the Start button, click on the Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click Event Viewer.
  2. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
  Visit this link for more information: http://windows.microsoft.com/en-US/windows-vista/Open-Event-Viewer
   
  After the details of the event log, so that we can help you better.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when trying to install Windows on Windows 8 updates

  Former title: windows 8

  Stuck into that and can't GET OUT! Failure of Windows updates. Restoration of the changes. Do not turn off your computer.

  Hello

  Please contact Microsoft Community.

  We understand the inconvenience that you are experiencing.

  1. How long it stays on the same screen?
  2. Windows Update is causing this issue?
  3. Have you tried to interrupt the installation at any time?

  When you try to install Windows updates, you get the following error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer. If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen. Suggest you not to interrupt this until he completely undo these changes.

  Please see the article below and see if this can help you.

  https://support.Microsoft.com/en-us/KB/949358

  Let us know if you need assistance.

• "Configuration of the Windows updates failed. Restoration of the changes

  Configuration of the failure of the updates are happening all the time and takes a long time to restore updates. Please tell us how can I prevent automatic updates.

  To avoid failure, follow these steps:

  "Configuration of the Windows updates failed. Restoration of the changes

• Windows Updates Setup error: "configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"stuck at 12%

  Just returned to windows 8, got my Norton security is and it.then update was of updates, so I can update to windows 8.1, but I got stuck when you try to update windows 8. It happened at 12%, and then tried to restart, it's 12% again.then what it says that windows does not not update reconfiguration do not turn off your computer.but I read someone post where they keyed off long the computer out the wireless USB mouse and took the card Sd, and the battery, put the battery back , but left the Sd Card and the mouse.and wireless USB, said, he started working.i tried all the this.and isn't yet working.it has been trying to run my computer hot.so I waited until what she calmed and it came again the same thing. ? Stuck in this mode.what do I do? I don't know if I should try just reset the computer of hole again or that it would be wrong.

  Original title: tried to update computers rose to 12%

  Hi Sandra,.

  Thanks for posting your query in Microsoft Community.

  You did it any significant hardware or change software on the computer before this problem?

  I understand that you can not install some updates with the error message "failure of configuration of the Windows updates...". ». I can imagine the disadvantages suffered by you and will certainly help you in the right direction to solve the problem.

  First place, according to the error message, I suggest you to try the steps in the following article and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  
  

  The question may arise if the Windows downloaded update packages are corrupt. So, if you are able to boot to the desktop with the help of the above article, I also suggest you try the following steps and check if the problem persists.

  Method 1:

  Try to run that Windows update utility provided in the following link.

  Problems with installing updates

  Try to install the updates after running the troubleshooter.

  If the problem persists, try the following method.

  Method 2:

  I suggest you to use Deployment Image Servicing and Management to fix Windows Update errors.

  (a) open an elevated command prompt. To do this, press the Windows key + Q and type in CMD right click on command prompt in the list and select run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (b) type the following commands. Press enter after each command

  • DISM.exe / Online/Cleanup-image /Scanhealth
  • DISM.exe / Online/Cleanup-image /Restorehealth

  (c) close the command prompt, and then run Windows Update again.

  Check if the problem persists.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• I first Pro CC and you want to create DVDs. I understand this need Ii Download Premiere Pro CS6 (with rappel) I find Premiere Pro CS6 in My creative Cloud window. BUT... it only allows me to install. He said "up to date". There is NO installation b

  I first Pro CC and you want to create DVDs. I understand this need Ii Download Premiere Pro CS6 (with rappel) I find Premiere Pro CS6 in My creative Cloud window. BUT... it only allows me to install. He said "up to date". There is NO button install. How to do it?

  Previous through Cloud http://helpx.adobe.com/creative-cloud/help/install-apps.html#previous

  - and if you have Cloud application manager 2015 https://forums.adobe.com/thread/1906752 of difference

  Instructions again, cloud or version https://forums.adobe.com/thread/1992717 serial number

  -a of notes on different versions of cloud and step by step on these differences

  -contains information about the separate library download which is necessary

• I upgraded my windows and I want to restore Adobe Reader XI (I think that's what I paid). How can I put this back on my computer?

  I upgraded my windows and I want to restore Adobe Reader XI (I think that's what I paid). How can I put this back on my computer?

  The reader is free, so I hope that you don't worry about it. You can download and install from here: http://get.adobe.com/reader/

• Pavilion 140 550 - t: 10 accidentally deleted windows recylce bin of Office I want to restore it

  Remove recycleing bim apps and I want to restore it

  Thanks for the reply I did what you suggested and it still not appear. It seems that under settings I had turned on my tablet mode. When you do this the recycling bim will aaway. Maybe other things happen as I never checked.

• Want 15t_j100 Quad E2E34AV Ed: 10 Windows upgrade failed - blinking display of Envy 15 t-j100 Quad Edition Notebook PC

  Upgrade Windows 10 failed on my Envy 15 t-j100 Quad Edition laptop.

  Symptom after upgrade has been a video exhibition quickly flashing without control of the PC.

  I have to go back to the previous version - Windows 8.1.

  Back with success on Windows 8.1

  Symptoms point to video card problem after updated Windows at level 10.

  My laptop has two, provided by HP online:

  Intel HD 4600 Grapics (internal)

  NVIDIA GeForce GT 740M

  See the research, that Intel and NVIDIA have Windows 10 drivers for these graphics cards.

  Yet immediately when Windows 10 signing after upgrade, the laptop display has been viewed quickly.

  The only way I could get control of the laptop was CTL-ALT-DELETE to start the Task Manager.

  The Task Manager showed that more CPU resources would "host setting synchronization process.

  Called Microsoft Support - they indicate a likely problem with display adapter driver and advised to "go back" and then contact HP support.   called HP Support and they advised to work with Microsoft.  Great!
  
  Would appreciate recommendations on the way forward for Windows 10.

  Dgood43 wrote:
  

  Initially I found the 10.18.13.5324 Rev.A-NVIDIA graphics driver.

  I was allowing the HP site automatically detect my curent - Windows OS 8.1.

  When I manually switched OS Windows 10, I see it listed.

  I also see 10.18.15.4248 that place listed for the Intel HD 4600 graphics card.

  Can I install both of these drivers before you upgrade Windows 10?

  Both are supported on Windows 8.1?

  If so, why HP Support Assistant would not have install me the upgrade?

  Am I missing something here?

  Install only the softpaq grahips from Nvidia. It will allow to install the two drivers.

  When I click on the button 'Download' blue, it offers two choices:

  Use HP download and install the Wizard (recommended)

  Download only

  This is the second option that you recommend when you say to use "usb flash drive support? Yes. Create an installer of Flash 10 Windows usb player. This is the second choice option.

  Thanks again for your help!

• 10 Windows Update has failed, restored for Windows 7 - cannot open existing files

  Oh boy, am I ever stressed.

  My update of Windows 10 failed today (error: failure of page in nonpaged area).  I will have that later - my immediate problem is that when the update failed and stopped, it is automatically reduced to Windows 7 and all of a sudden I can't get all my Word or Excel files.

  More specifically: I can't open my files in Word or Excel, except those saved on the desktop.  Desktop files open fine, but whatever it is saved in a folder or other location does not open.   Other types of file open: photos, Photoshop, PDF, apparently everything opens without a problem.  For Microsoft Office files, I get the following messages:

  For Excel:

  Excel cannot access "File Name.xls". the document may be read-only or encrypted.

  and

  "File Name.xls" are not accessible. The file may be corrupted, located on a server that is not responding or read-only.

  For Word:

  Cannot open the document: user does not have access privileges

  Possible Note:

  1. I registered normally (as an administrator).

  2. when I right click on the file and look at the properties, everything seems normal (read-only is not checked, and the location of the file looks correct.

  3. I tried to pass a doc to a folder on my desktop.  It says that I have to give permission to the administrator.  I am able to click on the button 'continue' admin, the file is moved to the desktop, but still does not open.

  Any advice would be welcome!  I'm not a computer expert, and I desperately need to access my documents.

  So I clicked 'Add', typed the username- desktop\user name in the subject box, and then clicked on "Check names", then press the OK"" button.

  And now, the file opens.

  I'm sure there's a better difficulty out there, I don't know what it is.  Whatever it is, I can access my files now.

  You have made the right choice. It is essential that the specific user or group 'everyone' has full access to the file or folder. The alternative would be to use the console commands. They require a good knowledge of administrative tools.

  Be sure to mark my suggestion as "Response" to this topic.