Want to Turn off UAC prompt when you try to run a program.

Original title: shortcut Windows 7 running a program that will start / stop services.

I use a shortcut in windows 7 to run a program that start / stop services.  He always asks me permission to run this program and I always want to run.  But it's the only shortcut that I encouraged it from.  Is there a way to flag / allows this action?

Hi ctcp-ga,.

You can try to change levels of notification and check if you get any user account control prompt.

Enable or disable the User Account Control


How can I change the behavior of user account control by using the slider?


Hope the helps of information. Please post back and we do know.

Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

    I got an error message in step 2 of configuring updates - "updates were not correctly configured.  Returning from changes' anyone can help solve this problem?

    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  • My administrator accounts will not accept PW administrator when you try to run a program. The IPL is corrent, because I can't lon on the administrator account by using the same PW. Any advice?

    Must be explicit

    Hi Ronnox,

    1. do you receive any error messages?

    2. were you able to use the Admin password before?

    3. did you of recent changes to the computer?

    4. This occurs when you try to access a particular program?

    If this only happens with a particular program, you can try uninstalling and reinstalling the program and check.

    Uninstall a program

    Hope this information is useful.

  • Open with is displayed when you try to run installed programs

    After that infection by AV Defender and Symantec virus cleaned, I'm unable to run any of my programs installed.


    Just in case there are persistent pieces of malware here is the method of complete elimination.
    .exe question difficulty in the next message.

    Try Mode safe mode with networking - repeatedly, press F8 that you start.

    The best two methods allow scanners to run and/or AV.exe out of the way or removing.

    CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

    Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

    If necessary use start - computer or Windows Explorer to navigate to

    C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
    necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
    is installed.

    Right-click on it and rename it to ZZMbam.COM (or something different than now) and
    Double-click it, and then run it like this. You can rename it back later. Do the same with
    other programs according to the needs. Use this method to others as needed - NOT assume all
    a program deletes all or that it is no other malicious software.


    Another method is to use them:

    Use Process Explorer to "Suspend" the process will not stop

    Then use AutoRuns to delete the malicious program startup items.

    Now use UnLocker to delete the files in the malware.

    You may need to do a file at a time.

    Process Explorer - free

    AutoRuns - free

    UnLocker - free (do not install the adaware Ebay)



    The AV.exe malware goes by many names:

    XP Internet Security 2010, Antivirus 2010 Vista and Win 7 Antispyware 2010 are thugs
    antivirus, scams for you force to pay for them while they have no advantage at all.

    How to remove Vista Antivirus 2010 as well as the other varieties AV.exe.

    RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you should also
    Run them in regular Windows when you can.

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool

    Microsoft Malicious removal tool - 64 bit

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
    programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
    Use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-- download="">

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).


    If necessary here are some free online scanners to help the




    Other tests free online


    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log

    Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
    turn it back on.

    How to run the check disk at startup in Vista


    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)


    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Code 80070241 in Windows update and "Windows cannot verify the digital signature for this file" when you try to run any program.

    Windows Update has appeared today when we started one of our machines, informing us that there are some installed updates. After reviewing the updates, we clicked on the "Install now" button, and immediately, it failed with the above error code.

    I tried to run regedit a reason unrelated, and it came with a dialog box error with "Windows cannot verify the digital signature for this file. A recent hardware or software change might be installed a file that is signed incorrectly or damaged or maybe it's a malicious software from an unknown source. »

    After researching here and elsewhere on google and did not find anything suitable, put us in the Win7 disk, recovery tools and tried to go back to a previous system restore point (3 days).

    The restoration went well, restarted, but the problem persists.

    Then, we just tried to install anti-malware software, but when trying to run the installer, we get a different error message indicating 'ShellExecuteEx failed; Code 577 "and then the same message on the verification of the digital signature.

    The computer is running fine all yesterday and has worked very well since just after the new year when he has been upgraded to Windows 7. No material changes have been made, and no software changes were made by users in the course of last week.

    The computer is an AMD Athlon II X 4 with 4 GB of RAM on a motherboard Asus M4A78-EM, linking a 64 GB SSD, with a 250 GB drive SATA data/programs. GPU is a Nvidia 260, and it has a CD and DVD player as well. It is connected to our router using the gigabit ethernet interface motherboards.

    It was under windows 32 - bit XP SP3 up just after the new year. When we put in place the new SSD to replace a hard drive older than we have did a new install of XP (slipstreamed with SP3) and then used the upgrade 32-bit W7 Home premium DVD version to upgrade the system. Since then, the system runs flawlessley.

    On the machine is MS office XP, Firefox 3.6.3, AVG 8.5 and a few games such as the Turbine DDO.

    The main user account used to try to solve these problems and to run Windows Update and try installing programs is a member of the Administrators group.

    Firefox works fine, serve, and he plays the games installed very well also. AVG reports to date, with no problems and has detected no threat.

    However, try to view the registry with regedit, or start Viewer event or compmgmt.msc that all do appear the message "cannot verify the digital signature.


    Can anyone offer an opinion on what might be wrong with this facility please, and how we could do to solve?

    Cannot run chkdsk/scandisk as he bought the message "cannot verify the digital signature" etc etc.

    This morning, the machine began to behave differently - stop playing back badly, refused to start Device Manager, open Control Panel correctly etc.

    So, I reset the BIOS to boot from the CD-ROM, slapped XP SP3 in reinstalled, then upgraded to Win 7 again.

    Still have no idea what caused the problem, but it seems to be gone now - reinstalled the same applications, AV / programs anti-malware, games, etc and everything seems to go fine now.

    * shrug *.


  • Access is denied problem on command prompt when you try to overwrite a file in the system32 folder.

    Access is denied problem on command prompt when you try to overwrite a file in the system32 folder. I gave the control of user accounts affecting for never notify his still does not. I am running Win 7 Home Basic 64-Bit please help me get out of here

    You have two options:

    • Perform the action under high administrator privileges.
    • Turn off UAC (not recommended).
    Why would you want to give users the right to modify files in the System32 folder? Sounds like a recipe for disaster.
  • I have CS6 Production Premium and speed category, I installed and when I try to run the program I need to sign up for the cloud.  I just want to use my version can help you or seated, me?

    I have CS6 Production Premium and speed category, I installed and when I try to run the program I need to sign up for the cloud.  I just want to use my version can help you or seated, me?

    I have stick thread regarding the CS6 and Cloud Creative Re: What's up with Adobe Application Manager CS6?

    and another, if you are confused enough, perhaps another angle my old CS6 now asking me to connect to the cloud

    and maybe he has your response a bit clearer how we prevent cloud creative resume my perpetual license CS6?

  • 5 error message when you try to run gimp - 2.18.16 - Setup could not create the directory

    5 error message when you try to run setup.exe gimp - 2.18.16 after downloading... it reads:
    Setup could not create the directory
    c:\Users\DEBSWO~1\AppDate\Local\Temp\is-IKDP5.tmp ".
    Error5: Access denied
    In the Temp folder under Security I have:
    'SYSTEM' with full control
    "Administrators" with full control
    "Username" with full control
    All of which is listed in the permissions, but the box for'Include the permissions that can be inherited from the parent to this object "below is checked but not really dim so that you cannot check or uncheck the box?"
    The two latest downloads gave the same error message.

    Thank you for your time.

    I suggest you do this:

    1. click on the start planet.
    2. type cmd.exe in the search box.
    3. press on Ctrl + Shift + Enter
    4. click on "run as Administrator".
    5. type the following commands exactly and press ENTER after each:
    takeown /f "%Temp%" / r

    Cacls "%Temp%" / t/c/g "%nom user %": F System: F

    (Enter Y when you are prompted "Are you sure?")

  • When you try to run the SFC/scannow I get the following message: Windows Resource Protection could not perform a requested operation.

    When you try to run Fsc/scannow I get the following message: Windows Resource Protection could not perform a requested operation. Can anyone help?

    Original title: problems with Windows Live Update

    You run it from a (run as administrator) command prompt?

    SC Tom

  • Error when you try to run an application that worked when built with 8.6

    I have a simple program that I wrote in the 8.6 version that I've never had a problem generation and execution of applications built with it to 8.6.  Two weeks ago, I got 2009 by mail because we had very recently purchased 8.6 and I get errors when you try to run an application built with the same code using 2009.  The error relates to the Mean.vi.  He claims that he can't find it.  The error I get is as follows:

    Error loading VI 'NI_AALBase.lvlib:Mean.vi '.  LabVIEW support 3 error code: could not load façade.  I don't have access to the front panel of this vi, so I wonder if there is a problem with the runtime and not my code.  Please answer as soon as possible because it will quickly start to the impact of my calendar.  Thank you.


    The same problem ?

    I talked with my local OR technical support team. The application now works without any problem.

    Rule of thumb: when creating a Setup program do not forget that the option "Run Time Engine xxxx" in the category "Other installers" is selected despite the fact that the runtime is already installed.

    Best regards.

  • Get "communication error with kernel" message when you try to run a virus scan program

    Get "communication error with kernel" message when you try to run a virus scan program


    What antivirus do you use?

    Follow the steps in the article mentioned below and check if this solves the problem.

    The error message "error communicating with kernel":


  • I get the following when you try to run programs such as Nero "this program requires the file AdvrCntr6.dll, which is not on this system."

    I get the following when you try to run programs such as Nero:-"this program requires the file AdvrCntr6.dll, which is not on this system."

    Please can you help me?

    Original title: AdvrCntr6.dll


    There is a guide for fixing here:


  • When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up

    When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up.  The header says 16-bit subsystem MS_DOS.  For example, when you try to start Microsoft Word, the message says:

    C:\Documents and Settings\All Users\Menu demarrer\programmes\microsoft Office\Microsoft Office Word 2003.lnk program invalid file name, please check your pif file.

    I can start the program by clicking on any document in my documents file, however.  I know that something is messed up in the registry (we had a bad worm (MS Removal Tool).  However, I can't a registry cleaner to open.  I used a WinXP_EXE_Fix.reg to try to fix the missing exe file.  He has set a number of things, but still will not let me run a registry clean.

    Any help?


    Try the following steps:

    1. follow the steps from the link below: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

    2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

    NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

  • Error when you try to run Quicken 2011: this program is not supported under XP

    Win XP pro - Quicken 2011

    I am running win XP pro. When you try to run Quicken 2011 I get an error message: this program is not supported under XP.  What I do toget Quicken supported?

    For help on Quicken, I recommend posting your question in the community live Quicken .  The people there can help you better as we can in this forum of Windows. Boulder computer Maven
    Most Microsoft Valuable Professional

  • Error code 0 x 80248014 when you try to run MSE Update on Vista 64 bit OS

    Tomb guard Windows Update crashes when you try to run the Service Pack 1 for Vista 64 even if it seems to have installed service pack when I view installed updates.  Update the window continues to show the service pack update according to availability.  So far, I ran it three times and he shows as installed three days in a row, but he does not appear in the properties view and continues to show an available update when I check for updates.

    It's a little confusing because the error code 0 x 80248014 appears when you try to update to MSE, so there seems to be two issues.  The MSE error one and two, the apparent success of the installation of the Service pack 1 for 64 bit Vista Home Premium but not appear in the properties view and always appear when checking for updates, even if each attempt to install appears to be successful.


    Run the system update tool


    Retry the update

    Reset the Windows Update components


    Error MSE - which describes the boots s. is what will do the above tools.


Maybe you are looking for