Wanted M6 Sleekbook: Can I get my free 10 Windows upgrade after a recovery of the system for Windows 7?

Hi guys,.

I have a HP Envy M6 Sleekbook. It came with Windows 7, and its warranty expired 2 years ago. I took the offer to get a free upgrade of Windows 10 a few months ago. Now, I want to exchange the hard drive out. I have a ready to run on a USB system recovery but its for the original configuration of Windows 7...

My question:

Is there a way I can share disks and get 10 back Windows without paying? HPO only allows you to create a system USB once recovery disk, so I can't make a new record of recovery with windows 10. When I get the factory Windows 7 running on the new hard drive, I'll be able to upgrade to Windows 10 new since I already had it and I wanted to just swap drives?  Thank you!!

This link should help you get started: upgrade Windows 10  

You can install Windows 7 with your recovery discs and then upgrade to Windows 10 or you can create a Windows [USB/DVD/ISO] 10 installation media and use it to make a 'clean' on the new hard drive installation.

Notes on activation:

 

  • If you have never installed and activated Windows 10 on this computer before, you will see the activation screen. Enter your key of Windows 10 here. If you do not, but you have a valid 7, 8 or 8.1 key, enter it here instead.
  • If you have already installed and activated Windows 10 on this computer before, click on "I don't have a product key. Windows will activate automatically after installation.

If you found my answer helpful please say thank you by clicking on the icon of the thumb.
If my answer has solved your problem, please mark it as accepted Solution. Thank you!

Tags: Notebooks

Similar Questions

  • How can I get application manager to install products after a restore of the system removed them?

    I had some problems to start the computer and had to use the system restore to do runnng.

    But this means that all applications that I installed using creative cloud disappeared.

    When I started the nursery of the Application, he read all the apps I had installed were still installed.

    I do not know how to reset everything to reinstall what I lost.   As you can see I said that installed programs are up to date. But they are not on the hard disk.

    If anyone can help, I thank very you much.  Or wait until they open tomorrow.      Barry

    Application Manager.JPG

    Run the Creative Suite cleanup tool, let the AAM to reinstall the programs.

    Mylenium

  • How can I perform a recovery of the system for a mini HP?

    Original title: System Recovery.

    How can I perform a recovery of the system for a hp mini?

    Hi waynemeyer,.

    1. why you want to make a system restore?

    2. you have a question about your computer?

    3. you have installed on your computer Recovery Console?

    If you try to restore the factory settings, you will need to contact the manufacturer of the computer for help.

    Contact HP

    Hope the helps of information.
    Please post back and we do know.

  • Want J010dx m7: windows will not start until after full recovery of the system with new HARD drive

    Hello world

    I need help here.

    My HP envy m7 J010dx works perfectly with my original hard drive (1 TB).

    I am preparing a second HDD (NEW 320) as backup.

    I took off the Moose HDD (1 TB) and replace it with the NEW HARD drive (320GB) and try to do a full recovery of the system with the HP recovery DVD.

    After full system recovery and laptop computer needs to be restarted in order to continue, the laptop keeps restarting on the logo of windows 8.

    I think it says device not found Boot. Also a test using the UEFI tool material HP and all pass.

    Replacing the NEW HARD drive with the original of the old HARD drive and it start normally.

    What can go wrong here in this case? Thank you very much for the help.

    Concerning

    John

    OK, I read through the thread and this is my point of view on this based on works including restore process with the user created a recovery (UCRDs) media which the user indicated that they used.

    If you just want to jump to the conclusion at the bottom, you can see my opinion. If you want to know 'why' Please read the entire post.

    Model No.: m7-j010dx

    Product #: E0K83UA #ABA

    Ships OS: Windows 8 (64-bit)

    Recovery HP part No. Kit: 730336-002 (3 DVDs + extra)

    User replaced the HARD drive with a 1 TB hard drive 5400 RPM with HP ProtectSmart hard drive Protection a new hard drive is a Seagate Momentus 7200.4 ST9320423AS 320 GB 7200 RPM 16 MB Cache SATA 3.0 GB / s 2.5 "Notebook internal hard drive.

    With the help of UCRDs sent media recovery media (SSRDs):

    When the UCRDs are created, only the drivers for the HW operation (this is a critical point, that I will look later) are burned to the user created a recovery media.  Consider this a snapshot of the current HW, the base drivers and software applications.   If you change the HW on your laptop or desktop where the additional device requires a different driver for these features, a few questions you might - recovery process could stop because he can't find the right driver, a blue screen, a lack of start-up or other unstable system.

    A few years ago, I had a PC that would not recover because the Blu - ray (ODD) optical disk drive did not work.  I replaced the WEIRD Blu - ray with a generic DVD/CD burner into the new part of Blu - ray is presented.   I got the PC using SSRDs thinking I would put some time and just install the Blu - ray after the PC has been recovered.   The PC recovered and when the new Blu - ray showed I installed the unit and guess what?  All PCs have shown in Device Manager and applications was a generic ODD - no Blu - ray capability and ability to read Blu - ray content in the default HP provided for multimedia applications delivered with the PC.  Applications were there but no Blu - ray capability.

    Huh?  It looks that I did not put any time at all.

    I inserted the new Blu - ray ODD and distributed recovery with the HP SSRDs.

    After recovery, I had all the Blu - ray drivers and applications supported Blu - ray.

    The difference between UCRDs and SSRDs:

    UCRDs provide a glimpse of what is installed and functional both disks are created.

    Version Digest of the player on what is happening with SSRDs to retrieve a PC (before Windows 10):

    SSRDs have all the drivers for all the HW and SW qualified for the unit.  There may be several drivers for hard drives, different types/screen resolutions, sides, etc.  Based on the characteristics of the specific laptop / desktop a process is run called "Do / don't.   After entering the recovery SDRD, the Notebook media boots to Recovery Manager.  The first step is a raw copy of all the contents of the disc on a temporary partition.  Following the Do / do not process looks at the characteristics of this specific unit and remove all other drivers and applications not used by this device.  Drivers and the only successful applications are the features supported.   And then, the new operating system and recovery partition is created.   The PC end recovery of cleaning process and restart the laptop / desktop. And, Yes, you guessed it, if you create the user created a recovery media, you only have the drivers for HW devices and applications of HP on the PC at the time.

    So, that being said, what could be the cause/solution?

    Hard drives can be different enough so that a different driver (not the UCRDs) is necessary for the newly installed HW.

    The SSRDs are supported on the new HARD drive installed?

    I don't know, I have an office boy, and I have not tried on this model of laptop.

    If you have / acquire SSRDs, I recover the laptop with the new installed HARD drive and see if it works.  It may or may not.  I don't know what drives were qualified for this laptop.

    If this does not work, the last option is cloning via USB connection (old HARD drive in the PC, new HARD drive connected to a USB 3 via the SATA Adapter (dongle) USB port, install or download software cloning and cloning the old HDD to the new.)   I just did this on the two older Windows 7 computers laptops using a SanDisk Ultra kit.  He has worked on both units.

    Conclusion:

    I don't think that the problem is caused from a HARD drive of 1 to a 320 GB HARD drive, as it meets the minimum specs for a complete installation.  I think the problem is related to the use of UCRDs to retrieve and the UCRDs do not have the HARD driver/firmware/application disc.

    But then again, I know.

    I am an employee of HP...

  • How can I get my diagnosis Sevice policy running after being stoped in the Microsoft Management Console (MMC) console?

    Services in my MMC (Microsoft Management Console) has been tampered with and now services such as Diagnostic Policy Service left running. I tried everything I know to do and I'm still stuck. How can I get my Diagnostic Policy Service is running again?

    Hi sabraneal,

    ·         What version of the operating system is installed on the computer?

    ·         Have what troubleshooting measures you tried?

    ·         Did you do changes on the computer before the show?

    Follow these methods.

    Method 1: Follow these steps:

    (a) click Start, type services in the search box of start and press to enter.

    (b) scroll down and select the Diagnostic Policy Service.

    (c) double click and start the service.

    Method 2: Scan the file system (CFS) auditor to repair corrupted files.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 3: Also check if the computer is in normal startup mode. Follow these steps:

    one), click on Start, run and type msconfig then press on enter.

    (b) on the general tab , the startup selection should be the normal startup mode.

    (c) click on apply and OK.

    (d) restart the system.

  • get the 0x400110020000100b error code while making the recovery of the system for windows vista 32 bit.

    I tried to do a system restore on my laptop using the included recovery disks and had this error 0x400110020000100B. The drive looked pretty beaten last week so I ordered a new series. Now, when I got to put disc 2 in (to 80% full) I get the same error.  I called customer service and he took me through the process of F9, nothing works and I also tried the F11 approach that made me not the case.  I'm frustrated because I don't really have the money for a new laptop computer.

    Laptop is a HP Pavilion DV6700.

    Any help would appreciated more than you know.

    The system is Windows Vista 32 bit

    The guy on the phone said ' well, you know it's a pretty old computer... Thank you gee...

    Hello:

    See if you can make your own Vista installation disc if you can read the product key 25 character on the bottom of your laptop.

    Here's how:

    If you are in a fault light but rewarding you can do yourself if you can read your product key of Vista on the PC of 25 characters.

    You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

    Do not take into account the part of the text in the first screen shot about "extract the files in the folder of Vista."

    The files were extracted already in this folder when you ran the X14.exe file by reading the text on top of the first screenshot.

    The other thing I noticed is on the 4th page, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in me, and then other codes already filled in.

    When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

    I selected no, make the ISO file.

    It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

    I tested both of them one my hp dc7100 CMT desktop PC, worked flawlessly.

    When you enter the product key, he knows which version of Vista you have.

    http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-v...

    After you install Vista successfully, you can then install the drivers for your PC and driver page support.

    Paul

  • How can I get rid of this weird line after that I used the function "Split" in Illustrator?

    So for the coat that I drew, I wanted to add more depth by adding different colors in. Itself drew a line on the top of the layer and use 'divide' function

    But he has that weird on white line, can someone help me get rid of it? Thank you

    Screen Shot 2014-11-21 at 5.50.27 PM.png

    I would go into the file HAVE and making the paths overlap slightly.

  • I can't get my LastPass plugin not working after following that advice to LastPass for Flash etc and it shows as active.

    I made sure that all my plug-ins including Flash are updated, I am also running the latest version of the LastPass plug-in. Everything seems allowed correctly, but I don't get the LastPass icon in the toolbar and no access to my passwords.

    Sorry to hear about current installation problems. You can reset your Firefox profile if you still cannot locate the LastPass addon in your Firefox toolbar area.

    Amber

  • Why I can't get Microsoft updates after a recovery of the system under Windows XP SP 2 preinstalled?

    Compaq Presario SR161oNx desktop computer

    Windows XP SP 2

    Web site can not display the webpage

    Hello

    Please go to this site:

    http://support.Microsoft.com/kb/943144

    Scroll down and click on "Fix It".

    Good luck.

  • The recovery of the system allow me to restore my previous setting because it says missing file (0 x 80070002)... How can I fix?

    Hi my names daniel

    My computer will not load past the system recovery options and I don't want to lose all my files, so I tried to restore vista windows to a previous setting from when I remembered last the computer works, however, when he made an error comes up saying that it cannot complete the process, because it lacks the file (0 x 80070002).

    Can someone help me on my problem?

    Hi Daniel,.

    I think you are referring to the recovery of the system for the restoration of the system, I want to know if it's something else.

    (1) what is the complete error message you receive?

    (2) to clarify, you try to run the system restore from recovery Windows (WINRE) or in the Office environment?

    (3) remember you to make changes prior to this problem?

    Method 1:

    Step 1: Start the computer using safe mode and then try System Restore. To do this, follow the steps below:

    Access Advanced Startup menu options by turning on your computer and pressing the button F8 continuously until Windows starts. In the boot advanced options, select Mode safe

    Startup options (including safe mode)

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    Step 2: Put the computer to an earlier point in time where everything worked well. To do this, follow the steps mentioned in the link below:

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

    Method 2: You can run chkdsk to repair bad sectors on the hard drive in safe mode or from the Windows recovery environment.

    Run the check disk from the Windows recovery environment

    ) a command of Windows access (as shown in the link below) recovery: run the disk check to repair bad sectors on the hard disk.

    (b) at the command prompt, type chkdsk /f and then press ENTER.

    (c) now, type chkdsk /r and press enter

    See the link below
    How to access the System Recovery Options menu?

  • Where can I get a free download of the .ov2 file

    where can I get a free download for this please.

    Original title: .ov2 file

    Hello

    Check with Highway support and support (and forums) for the program
    Generate .ov2 files, you need to convert.

    Highway - Support
    http://www.Microsoft.com/UK/Autoroute/support.aspx

    Support for MapPoint, streets & trips and Highway
    http://support.Microsoft.com/ph/851

    Highway
    http://www.Microsoft.com/UK/Autoroute/home.aspx

    ===================================================

    People supporting and use other mapping software may have some suggestions.

    Streets & Trips
    http://www.Microsoft.com/streets/en-us/default.aspx

    Streets & Trips - help and Support
    http://www.Microsoft.com/streets/en-us/support-and-training.aspx

    Streets and travel community
    http://www.Microsoft.com/streets/en-us/community-and-news.aspx

    Streets and travel Forum
    http://social.Microsoft.com/forums/en-us/streetsandtrips/threads

    Highway, Streets & Trips, MapPoint - Forum
    http://social.Microsoft.com/forums/is/streetsandtrips/threads

    MapPoiint - Support
    http://www.Microsoft.com/MapPoint/en-us/support.aspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • How can I get a free upgrade from Vista to Windows 10?

    I have windows vista, how can I get 10 free windows please?

    [Original title: windows 10]

    Windows 10 was proposed only for Win7 users and 8.1, Win8 even not.

  • Where can I get a free copy of Windows Vista Home Premium for a laptop Sony Vaio I have my product key, but need to the floppy?

    where can I get a free copy of windows vista edition Home premium? I tried to restore my laptop without success. I think I need a copy of the installation disc so that I can reinstall it with my current product key

    Hello

    There's a photo guide based on the recovery of your model here...

    http://www.Sony-Asia.com/support/tutorial/381906/product/VGN-fz18g

    If you cannot use this method because what did your friend, your options are...

    • Pay Sony for media recovery
    • A base Windows installation followed by installing specific Sony drivers and software from their Web site.

    If you walk down the road of the latter, I would say that, if possible, before you begin reinstalling Windows you download at least the Ethernet drivers and wireless and save in, for example, a USB key. Start your drivers to search for them (and other) here...

    http://www.Sony-Asia.com/support/product/VGN-fz18g/FAQ

    .. everything will be difficult to download if drivers that allow access to the internet are not native to a new installation of Windows.

    Your principled stand against Sony charges for media recovery is, in my opinion, wrong. As I already said twice...

    If Sony did not provide recovery media that they have provided the means to create them

    If you lost or do not burn them and messed up your recovery partition, it's not for lack of Sony.

    My serious recommendation is to accept a fee of Sony for the recovery media. It will make life much simpler for you. For this reason alone, it is probably useful tax, especially considering that you're obviously not a user advanced. Otherwise, why ask the help of a friend and ask for help on this forum?

    I suspect that the links I've seen on this website are actually only valid for Windows 7 media images. If you do not buy the recovery media and go with an iso image download Vista Home Premium, I have to warn about the following...

    • The legality of this is, at best, questionable
    • If it's not genuine Microsoft media you might end by in an even bigger mess (if it works at all)

    Tricky

  • Have the product key but no media. Can I get a free download online media?

    Have the product key but no media. Can I get a free download online media?

    Given that Microsoft has removed downloads of digital river you have two equally bad options.

    Microsoft https://support.microsoft.com/kb/326246?wa=wsignin1.0 backup support request 
    Or if you have a retail key (NOT OEM operating system preinstalled) http://www.microsoft.com/en-us/software-recovery 
    You may be better of borrowing a person.  For OEM (preinstalled) you should contact the manufacturer of the computer.
  • can I get a free c ++ programming language tutorial (e-book)

    can I get a free c ++ programming language tutorial (e-book) Please I need help to learn this program and advice to guide me.

    Hi Kanu,

    I suggest you to visit the links below and check if it helps.

    Learn Visual C++

    Visual C++

    If you have questions about Visual C++, you can post your questions in the link mentioned below.

    http://social.msdn.Microsoft.com/forums/en-us/vcgeneral/threads

    Microsoft does not provide an online tutorial, you can use your favorite search engine to find a site that provides online tutorial.

    Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

Maybe you are looking for