wanted m6 ultrabook touch does not illuminate

Similar Questions

• New Ipod Touch does not illuminate

  Buy IPod Touch last summer (August 2015) and died this morning. Can not activate it or it will load. Any suggestions?

  Try the following steps:

  1. Press and hold the home and power buttons at the same time for at least 15 seconds until you see the Apple Logo.
  2. If this does not work, load your iPod for at least 10 minutes, or until the Apple logo appears.
  3. If none of the steps above do not work, here is a link to give you more information: If your iPod touch does not illuminate
  4. Be sure to contact the Apple support if you need more help.

  Good luck!

• My ipod touch does not illuminate, but siri works and turn on randomly.

  I was using my ipod and then it froze from nowhere. So, I turn it off using the power button. But, siri was turning, and saying: "I don't have that." Although I do not have suumon him. And now my ipod turns on.

  Try to keep the sleep/wake and home button until the apple logo appears or 15-20 seconds. -AJ

• HP 15-d040nr: my laptop screen touch hp does not illuminate

  My laptop touch screen computer hp laptop (not sure of the name of the template) does not illuminate. My computer has problems finding networks so I restarted it by using the restart function, and when it will ever stop finished back. When I press the power button / of on the internet key light turns orange and the port on the adapter lights up as usual as well, but the screen remains black. This laptop is only a little over a year, I don't know how to fix it. I tried to unplug the adapter and taking the battery, now the power for 30-60 seconds and everything put back and that does not work, I have read a lot of forums and tried everything but nothing seems to work. If anyone has an idea of what I can do, that would be really appreciated, I don't want to consider to get a diagnosis and spend tons of money. Thank you!

  I ended up taking my laptop to a tech repair shop and found out that the problem was the motherboard - I had to pay for a new part and pay for this service, luckily the place is a fair price and only cost me the price of a new laptop. It sucks that I have had the computer for less than two years and I have to do an important replacement, but at least I know never buy another laptop HP again! Good luck!

• iPhone6 the wifi button does not illuminate.  I want to download the new update.  I restarted the phone, my router is active.

  iPhone 6 with iOS9.3.4.

  WiFi button does not illuminate.  I rebooted the phone.  How can I make this button of the device?

  You can always update your firmware with iTunes. But it seems you might have a larger, likely hardware problem with your phone.

  Try to restore the firmware with iTunes. If this does not help, make an appointment with a genius at the Apple Store.

• iPod touch 5th generation does not illuminate.

  I got this iPod since the end of 2013. The home button has stopped working for a period of one month. Last night my battery was sufficient to last for several more hours, my iPod worked perfectly well. Then when I go to check this morning, it does not work. Not at all. When I tried to look it up on the way to solve the problem on Apple support, someone explained how try restarting it through the power and the "home" button. However, even once my home button does not work. I tried holding down the power button, then pressed on and even once tried to plug it into the charger to the wall, he still won't turn. Another user said try to connect to Itunes to see if I can restore it, ultimately, it failed for the fact that Itunes does not recognize it. I could really use some help.

  Press the sleep/wake and Home buttons and hold for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• A1 - menu button does not illuminate

  Hi all

  I bought a Lenovo A1 and the menu button does not illuminate.
  The home button and rear lights when I touch one of the three buttons, but the menu button does not work.
  When I touch the menu button, the menu opens.

  The build number is now A107W0_A234_001_014_2525_ROW, but the menu button light also does not work before the update.

  Does anyone know how can I fix?

  Kind regards

  UCS

  I called amazon and they will send me a new A1 next week. I hope that this will have no problems...

• Have a Pavillion DV ^-3250us, Win 7, 64 Bit. WIFI does not illuminate

  Wireless won't turn on; wired connection is fine.

  HP wireless Asst says that the wireless is activated by the keyboard. Steady orange light & does not illuminate.

  If I turn off the power & remove the battery, I can get a blue light when I turn on the PC.

  But then the PC wants to update the driver.  When she did this, the problem returns.

  Before replacing the BIOS, I decided to try something less drastic.

  (Always to play with the BIOS that makes me sick at heart)

  I noticed that the driver installation always fails.

  But before the boot process that took well to the long, I noticed that I could turn the wireless card on & turn off with the F12 key.

  But once the initialization is completed, the card might be disabled.

  Therefore, I have concluded that the material of the wireless card was probably good.

  Then, I deleted the driver and let Windows update select the BIOS install.

  The next round of selected SW another update driver to install; and now everything works.

  So something must have gotten corrupted and caused the wrong driver to settle.

• Pavillion G7 1263-nr: HP Pavillion G7 led beside the power supply plug flashes 3 times... does not illuminate?

  Unit does not illuminate. When the Start button / stop is pressed with power cord only or with the battery and the power cord or battery only I get 3 flashes of the white LED on the side of the unit next to the power supply.

  I replaced the receiver taken power in the change of unit No.....

  I used an other (workin) power cord and adapter... no change.

  I tried another battery (work)... no change.

  I pulled the two memory chips don't... no change.

  I put the two don't chip memory in one at a time... no change!

  I'm out of solutions short of replacement motherboard which is not profitable unless I want to take a chance on a reduced opportunity to the Board of Directors.

  Only the indication of all this work are three white flashes of LED is located just next to which DC adapter/cable plugs?

  Any other suggestions/diagnosis would be appreciated.

  Thank you!

  I had to contact HP and according to them the power port led flashes 3 times after pressing the power on button, indicates a failure of the motherboard and requires a replacement.

• Phone of blackBerry Smartphones does not illuminate on BB Bold 9000

  My 9000 does not illuminate. The red light turns on and stays on for about 1 minute.

  Then the screen goes to white battery with a red 'X' through it.

  I've tried other types of accumulators that have been verified to be good with the same results.

  I tried other chagers of wall with the same results.

  I have repeatedly let the phone charge for several hours, removed the battery and replaced after a few moments with the same results.

  This problem started after the battery became very impoverished after leaving the phone on mode bedside from one day to the next. The phone worked without any problems up to this point. It is about 2 1/2 years.

  All my contacts are on the phone and not have been backed up or saved on the sim card.

  Anyone have any suggestions to turn the phone so that I can download at least my contacts?

  Hello and welcome to the community!

  Given what you describe, I assume there to be hopeless... nothing can get your BB to start considering what you describe. And all the tips recovery remaining would erase the own BB in the context of the recovery, and your data will be lost. It seems to me that, whatever happens, this old adage applies to you:

  • There are two types of computers of users of devices - those who have lost data and those who will be

  I fear that you are about to migrate from the latter to the former. Backups, quite simply, are not an optional activity.

  Let us know if you want some of the radical of the recovery tools (destruction of data) to try...

  Good luck!

• Edge E520 does not illuminate

  Hello

  Yesterday, I turned off my laptop (also, without any problem). Today does not illuminate! I tried it not too:

  1 - Disconnect the power adapter and remove the battery. Then press the power button 10 times in a row at one-second intervals. Then push and hold the button for 30 seconds. Then put the battery back in and pushed the power button / stop, but not turning on.

  2 disconnect the power adapter and remove the battery. Then press the power button 10 times in a row at one-second intervals. Then push and hold the button for 30 seconds. Then put the power adapter (without battery) and push the power button, but will not turn on.

  If the AC adapter is connected, indicators of the State of the power supply is turned off.

  Note: I have no day Bios and etc, I have no devices. I installed just Windows Server 2008 R2 and worked well.

  I want to know what happened!

  Thank you

  Concerning

  A number of us have had similar problems, at least with E420s.  The solution to this is to send it to a service center and they will replace the motherboard if the system is still under warranty. I'm on my second dose this in 4 months!

  This problem seems to be fairly widespread, and in my view, that there is a problem of design with the Edge series.

  EDIT ADMIN 08/30/2013

  If you have these symptoms, please contact support, regardless of the status of the guarantee.  There may be additional provisions (through the 30/08/2013 depending on factors of qualification) to help you - support should be able to determine.

   

  30/08/2013 update - Lenovo regrowth date end to 11 30, 2013.

  EDICT OF THE ADMIN - 15/12/13

  The covereage extended for these symptoms ended on 30/11/2013 as shown above.

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• My MacBook Air does not illuminate

  MY MacBook Air does not illuminate?

  Nothing happens when you try?

  Power light?

  Tones? Startup chime?

  If you connect to the charger, which is LED color on the card?

• iMAC does not illuminate

  MY iMAC, which is several years old does not illuminate

  Take the test/diagnosis. Nobody here can 'pull' hardware problems.

  Barry

• 2009 iMac 21.5 does not illuminate

  My 2009 iMac monitor is black and does not illuminate.  It has been connected to different computers, macbook pro and a mac mini with the same result. Is there something that can be done or is it just toast?

  Try to zap the PRAM or reset the SMC.

  Board: https://discussions.Apple.com/docs/doc-3603iMac SMC and the PRAM reset   

  Otherwise, take the model to your local store from Apple or a DAD.